Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cold pools”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Grid Spacing Sensitivities of Simulated Mid-Latitude and Tropical Mesoscale Convective Systems in the Convective Gray Zone

The main objective of this study is to observationally constrain processes in tropical and midlatitude mesoscale convective systems (MCSs), and to use these constraints for model evaluation. To accomplish this, we leverage MCS observations collected at the U.S. DOE Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) site in Oklahoma and ARM's mobile GoAmazon2014/15 site in Manaus, Brazil (MAO). We simulate 13 and 11 of these observed MCSs at the SGP and MAO site, respectively, using the Weather Research and Forecasting model at 12-, 4-, 2-, and 1-km horizontal grid spacing. Observations from radiosondes, surface meteorology, and radar wind profilers are used to characterize MCS properties, such as MCS timing and location, cold pools, and convective drafts, and evaluate these simulations. SGP cases are found in better agreement with observations than MAO cases, and when simulated at 2 km, outperform simulations at 1 km regarding the timing of MCS overpass and the accuracy of surface variable trends. MAO simulations suggest a consistent improvement in model accuracy with increasing model resolution in depicting the downdraft structure, the timing of MCSs, and the surface variables changes, except for the latter two metrics at 2 km. Deficiencies are still evident at km-scales, suggesting the need for higher resolution to simulate tropical MCSs. Overall, location-dependent improvements in MCS representation are obtained with the increasing model resolution, prompting the evaluation of sub-km scale simulations.

54 ENVIRONMENTAL SCIENCES↗

Factors Controlling Precipitation Onset and Maintenance: Inferences From Large Eddy Simulations of Two Afternoon Deep Convective Regimes Over Amazon

To investigate the environmental factors controlling the onset and maintenance of afternoon precipitation over tropical rainforests, two contrasting cases are created for large eddy simulations (LES) using GoAmazon observations: one features a single-pulse rain dissipating quickly in earlier afternoon, while the other shows double pulses lasting until evening. For these two specific cases under consideration, LES confirms that early-morning relative humidity dominates afternoon rain patterns. The attributed impacts are distinct: moisture determines the rain onset timing while temperature affects the peak rain intensity. Single-pulse day observes one round of strong precipitation and cold pools, which further suppresses convection. On double-pulse day, the first precipitation peak results from an intermediate development of congestus clouds, whose detrainment leads to a gradual moistening of the lower-to-middle troposphere. This behavior of convection favors a second pulse of stronger precipitation with more convective organization, whose development decouples from surface fluxes and sustains until evening.

Amazon↗

Investigating the Relative Roles of INPs and CCN in a Simulated Thunderstorm Using a New Immersion Freezing Algorithm

Microphysical processes in deep convective clouds are sensitive to the number concentrations of cloud condensation nuclei (CCN) and ice nucleating particles (INPs), but the effects of INPs are less studied. Modeling studies investigating the effects of INPs and/or CCN on deep convection typically retain a volume‐dependent raindrop freezing relation. The resulting neglect of aerosol accumulation in raindrops via drop collisions has likely produced unrealistic storm responses to INPs in past studies. To address this deficiency, a new immersion freezing algorithm was developed and embedded in a bulk microphysics scheme that freezes both cloud drops and raindrops using the same immersion freezing INP (IF‐INP) activity spectrum based on measurements. Multiple idealized simulations of a single case of deep convection observed during the Clouds, Aerosols, and Complex Terrain Interactions (CACTI) field campaign were conducted, with microphysical differences produced by independently altering IF‐INP temperature dependencies and CCN number concentrations from their observed values. Surface precipitation in all simulations resulted almost exclusively from riming graupel that melted upon descending to the surface. Rainfall and cold pools were substantially and systematically weakened with increased CCN due to decreased graupel riming rates but were relatively insensitive to variations in the magnitude and slope of IF‐INP spectra due to compensating depletion of supercooled liquid water. These compensating processes were a consequence of the accumulation of IF‐INPs in raindrops, encouraging caution in studying IF‐INP effects upon thunderstorms using traditional volume‐dependent drop freezing relationships.

CCN↗

Capturing convection essential for projections of climate change in African dust emission

The summertime Sahara and Sahel are the world’s largest source of airborne mineral dust. Cold-pool outflows from moist convection (‘haboobs’) are a dominant source of summertime uplift but are essentially missing in global models, raising major questions on the reliability of climate projections of dust and dust impacts. Here we use convection-permitting simulations of pan-African climate change, which explicitly capture haboobs, to investigate whether this key limitation of global models affects projections. We show that explicit convection is key to capturing the observed summertime maximum of dust-generating winds, which is missed with parameterised convection. Despite this, future climate changes in dust-generating winds are more sensitive to the effects of explicit convection on the wider meteorology than they are to the haboobs themselves, with model differences in the change in dust-generating winds reaching 60% of current values. The results therefore show the importance of improving convection in climate models for dust projections.

54 ENVIRONMENTAL SCIENCES↗

Development of a Validation Approach for an Integrated Waste Glass Melter Model

Integrated models are being developed to represent the physics occurring within the high-level and low-activity waste melters that will be used to vitrify legacy tank waste at the Hanford site. These models couple the melt pool, cold cap, and plenum region within a single computational domain. Validation of the models is essential to ensure the reliability of the numerical predictions of the operational melters. Experimental data from laboratory- and pilot-scale tests are thus being used to inform and validate various aspects of the melter model. This study presents a tiered approach to model validation consisting of a series of progressively more complex test cases designed to model the physics occurring in the full-scale system. A hierarchical methodology has been developed to segregate and simplify the physical phenomena affecting the multiphase flow and heat transfer within a waste glass melter. Finally, four hierarchical levels are defined in a validation pyramid and built up in levels of increasing complexity from unit problems to subsystem cases, to pilot-scale systems, and then to the full-scale system.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Sensitivity of organized convective storms to model grid spacing in current and future climates

Mesoscale convective systems (MCSs) are complexes of thunderstorms that become organized and cover hundreds of kilometres over several hours. MCSs are prolific rain producers in the tropics and mid-latitudes and are the major cause of warm-season flooding. Traditionally, climate models have difficulties in simulating MCSs partly due to the misrepresentation of complex process interactions that operate across a large range of scales. Significant improvements in simulating MCSs have been found in kilometre-scale models that explicitly simulate deep convection. However, these models operate in the grey zone of turbulent motion and have known deficiencies in simulating small-scale processes (e.g. entrainment, vertical mass transport). Here, we perform mid-latitude idealized ensemble MCS simulations under current and future climate conditions in three atmospheric regimes: hydrostatic (12 km horizontal grid spacing; Δx), non-hydrostatic (Δx = 4, 2 and 1 km) and large eddy scale (Δx = 500 m and 250 m). Our results show a dramatic improvement in simulating MCS precipitation, movement, cold pools, and cloud properties when transitioning from 12 km to 4 km Δx. Decreasing Δx beyond 4 km results in modest improvements except for up- and downdraft sizes, average vertical mass fluxes, and cloud top height and temperature, which continue to change. Most important for climate modelling is that Δx = 4 km simulations reliably capture most MCS climate change signals compared to those of the Δx = 250 m runs. Significantly different climate change signals are found in Δx = 12 km runs that overestimate extreme precipitation changes by up to 100%.

54 ENVIRONMENTAL SCIENCES↗

Thermodynamic properties of mesoscale convective systems observed during BAMEX

Dropsonde observations from the Bow-echo and Mesoscale convective vortex EXperiment (BAMEX) are used to document the spatio-temporal variability of temperature, moisture and wind within mesoscale convective systems (MCSs). Onion type sounding structures are found throughout the stratiform region of MCSs but the temperature and moisture variability is large. Composite soundings were constructed and statistics of thermodynamic variability were generated within each sub-region of the MCS. The calculated air vertical velocity helped identify subsaturated downdrafts. We found that lapse rates within the cold pool varied markedly throughout the MCS. Layered wet bulb potential temperature profiles seem to indicate that air within the lowest several km comes from a variety of source regions. We also found that lapse rate transitions across the 0 C level were more common than isothermal, melting layers. We discuss the implications these findings have and how they can be used to validate future high resolution numerical simulations of MCSs.

54 ENVIRONMENTAL SCIENCES↗

The Microphysical Roles of Lower-Tropospheric versus Midtropospheric Aerosol Particles in Mature-Stage MCS Precipitation

Abstract Simulations of two leading-line, trailing-stratiform mesoscale convective system (MCS) events that occurred during the Midlatitude Continental Convective Clouds Experiment (MC3E) have been used to understand the relative microphysical impacts of lower- versus midtropospheric aerosol particles (APs) on MCS precipitation. For each MCS event, four simulations were conducted in which the initial vertical location and concentrations of cloud droplet nucleating APs were varied. These simulations were used to determine the precipitation response to AP vertical location. Importantly, the total integrated number and mass of the initial aerosol profiles used in the sensitivity simulations remained constant, such that differences in the simulations could be directly attributable to changes in the vertical location of cloud droplet nucleating APs. These simulations demonstrate that lower-tropospheric APs largely influenced the precipitation response directly rearward of the leading cold pool boundary. However, farther rearward in the MCS, the relative impact of lower- versus midtropospheric APs largely depended on the MCS structure, which varied between the two events because of differences in line-normal wind shear. Midtropospheric APs were able to activate new cloud droplets in the midtropospheric levels of convective updrafts and to enhance mixed-phase precipitation through increased cloud riming, and this microphysical pathway had a more significant impact on mixed-phase precipitation in weaker line-normal wind shear conditions. This result exposes the importance of properly representing midtropospheric APs when assessing aerosol effects on clouds. This study also demonstrates the utility of assessing aerosol effects within the different regions of MCSs.

54 ENVIRONMENTAL SCIENCES↗

Power-Law Scaling in the Internal Variability of Cumulus Cloud Size Distributions due to Subsampling and Spatial Organization

In this study, the spatial structure of cumulus cloud populations is investigated using three-dimensional snapshots from large-domain LES experiments. The aim is to understand and quantify the internal variability in cloud size distributions due to subsampling effects and spatial organization. A set of idealized shallow cumulus cases is selected with varying degrees of spatial organization, including a slowly organizing marine precipitating case and five more quickly organizing diurnal cases over land. A subdomain analysis is applied, yielding cloud number distributions at sample sizes ranging from severely undersampled to nearly complete. A strong power-law scaling is found in the relation between cloud number variability and subdomain size, reflecting an inverse linear relation. Scaling subdomain size by cloud size yields a data collapse across time points and cases, highlighting the role played by cloud spacing in controlling the stochastic variability. Spatial organization acts on top of this baseline model by increasing the maximum cloud size and by enhancing the variability in the number of smallest clouds. This reflects that the smaller clouds start to live on top of larger-scale thermodynamic structures, such as cold pools, which favor or inhibit their formation. Compositing all continental cumulus cases suggests the existence of a prototype diurnal time dependence in the spatial organization. A simple stochastic expression for cloud number variability is proposed that is formulated in terms of two dimensionless groups, which allows objective estimation of the degree of spatial organization in simulated and observed cumulus cloud populations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

How does vertical wind shear influence entrainment in squall lines?

The influence of vertical wind shear on updraft entrainment in squall lines is not well understood. To address this knowledge gap, a suite of high-resolution idealized numerical model simulations of squall lines were run in various vertical wind shear (hereafter “shear”) environments to study the effects of shear on entrainment in deep convective updrafts. Low-level horizontal mass flux into the leading edge of the cold pool was strongest in the simulations with the strongest low-level shear. These simulations consequently displayed wider updrafts, less entrainment-driven dilution, and larger buoyancy than the simulations with comparatively weak low-level shear. An analysis of vertical accelerations along trajectories that passed through updrafts showed larger net accelerations from buoyancy in the simulations with stronger low-level shear, which demonstrates how less entrainment-driven dilution equated to stronger updrafts. Additionally, the effects of upper-level shear on entrainment and updraft vertical velocities were generally less pronounced than the effects of low-level shear. We argue that in addition to the outflow boundary-shear interactions and their effect on updraft tilt established by previous authors, decreased entrainment-driven dilution is yet another beneficial effect of strong low-level shear on squall line updraft intensity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Near-surface Density Currents Observed in the Southeast Pacific Stratocumulus-topped Marine Boundary Layer

Density currents (i.e. cold pools or outflows) beneath marine stratocumulus clouds are characterized using a 30-d data set of ship-based observations obtained during the 2008 Variability of American Monsoon Systems (VAMOS) Ocean-Cloud-Atmosphere-Land Study Regional Experiment (VOCALS-REx) in the southeast Pacific. An objective method identifies 71 density current fronts using an air density criterion and isolates each density current’s core (peak density) and tail (dissipating) zone. Compared to front and core zones, most density current tails exhibited weaker density gradients and wind anomalies elongated about the axis of the mean wind. The mean cloud-level advection relative to the surface layer wind (1.9 m s-1) nearly matches the mean density current propagation speed (1.8 m s-1). The similarity in speeds allows drizzle cells to deposit tails in their wakes. Based on high-resolution scanning Doppler lidar data, prefrontal updrafts had a mean intensity of 0.91 m s-1, reached an average altitude of 800 m, and were often surmounted by low-lying shelf clouds not connected to the overlying stratocumulus cloud. Nearly 90% of density currents were identified when C-band radar estimated 30-km diameter areal average rain rates exceeded 1 mm d-1. Rather than peaking when rain rates are highest overnight, density current occurrence peaks between 0600 and 0800 local solar time when enhanced local drizzle co-occurs with shallow subcloud dry and stable layers. The dry layers may contribute to density current formation by enhancing subcloud evaporation of drizzle. Density currents preferentially occur in regions of open cells but also occur in regions of closed cells.

density currents↗

Convective-storm environments in subtropical South America from high-frequency soundings during RELAMPAGO-CACTI

During the RELAMPAGO-CACTI field experiments in 2018-19, an unprecedented number of balloon-borne soundings were collected in Argentina. Radiosondes were launched from both fixed and mobile platforms, yielding 2712 soundings during the period 15 October 2018-30 April 2019. Approximately 20% of these soundings were collected by highly mobile platforms, strategically positioned for each intensive observing period, and launching approximately once per hour. The combination of fixed and mobile soundings capture both the overall conditions characterizing the RELAMPAGO-CACTI campaign, as well as the detailed evolution of environments supporting the initiation and upscale growth of deep convective storms, including some that produced hazardous hail and heavy rainfall. Episodes of frequent convection were characterized by sufficient quantities of moisture and instability for deep convection, along with deep-layer vertical wind shear supportive of organized or rotating storms. Eleven soundings showed most-unstable convective available potential energy (MUCAPE) exceeding 6000 J kg-1, comparable to the extreme instability observed in other parts of the world with intense deep convection. Parameters used to diagnose severe-storm potential showed that conditions were often favorable for supercells and severe hail, but not for tornadoes, primarily owing to insufficient low-level wind shear. High-frequency soundings also revealed the structure and evolution of the boundary layer leading up to convection initiation, convectively generated cold pools, the South American Low-Level Jet (SALLJ), and elevated nocturnal convection. This sounding dataset will enable improved understanding and prediction of convective storms and their surroundings in subtropical South America, as well as comparisons with other heavily studied regions such as the central United States that have not previously been possible.

Schumacher, Russ S.↗

A protocol and analysis of year-long simulations of global storm-resolving models and beyond

We propose a protocol to evaluate and analyze year-long simulations of global storm-resolving models (GSRMs). The proposed protocol complements an earlier 40-day simulation protocol under the DYAMOND (DYnamics of the Atmospheric general circulation Modeled On Non-hydrostatic Domains) project to allow the analysis of the seasonal cycle and associated climatic relevant phenomena. This intercomparison aims to reveal how GSRMs, which can simulate mesoscale convective systems (MCSs) in the global domain, reproduce atmospheric large-scale structures related to convection beyond month-long simulations. The intercomparison for one-year simulations is conducted by either atmosphere-only models or atmosphere–ocean coupled models with atmospheric horizontal mesh sizes less than 5 km. We recommend the continuous four seasons from March 2020 to February 2021 as a target period for the intercomparison but with options for many groups to join more flexibly. The output variables are collected at 0.25° resolution, and archives of a small set of native grid variables are encouraged to analyze tropical cyclones and MCSs. Through the proposed global storm-resolving simulation, we will evaluate the climatological distributions of the atmospheric large-scale circulations, such as the Intertropical Convergence Zone (ITCZ), monsoon, midlatitude jets, their time evolution, and the upscale impacts on them. We present sample analyses from a one-year simulation using the 3.5 km mesh Nonhydrostatic Icosahedral Atmospheric Model (NICAM), revealing the realistic zonal contrast of tropical precipitation, no double ITCZ structure, the reasonable midlatitude jet position and intensity but a weak bias of storm track activities, and a warm bias over the Eurasia during boreal winter. We also clarify the cross-scale interaction, such as the effects of cold pools on mean precipitation over the Maritime Continent through the precipitation diurnal cycle and the effects of resolved gravity waves on midlatitude mean flows. The proposed one-year simulation protocol is referred to as the “Sendai Protocol.” This protocol is not unique or definite for evaluating GSRMs; we prospect a hierarchical set of experiments from short-term to multi-year simulations as GSRM intercomparisons.

54 ENVIRONMENTAL SCIENCES↗

Low Frequency Modulation of Extreme Temperature Regimes in a Changing Climate

The project examines long-term changes in extreme temperature episodes (ETE) associated with planetary climate modes (PCMs) in both the real atmospheric and climate model simulations. The focus is on cold air outbreaks (CAOs) and warm waves (WWs) occurring over the continental US during the past 60 winters. No significant long-term trends in either WWs or CAOs are observed over the US. The annual frequency of CAOs is affected by the (i) North Atlantic Oscillation (NAO) over the Southeast US and (ii) Pacific–North American (PNA) pattern over the Northwest US. WW frequency is influenced by the (i) NAO over the eastern US and (ii) combined influence of PNA, Pacific decadal oscillation (PDO), and ENSO over the southern US. The collective influence of PCMs accounts for as much as 50% of the regional variability in ETE frequency. During CAO (WW) events occurring over the southeast US, there are low (high) pressure anomalies at higher atmospheric levels over the southeast US with oppositely-signed pressure anomalies in the lower atmosphere over the central US. These patterns lead to anomalous northerly (for CAOs) or southerly (for WWs) flow into the southeast leading to cold or warm surface air temperature anomalies, respectively. One distinction is that CAOs involve substantial air mass transport while WW formation is more local in nature. The primary differences among event categories are in the origin and nature of the pressure anomaly features linked to ETE onset. In some cases, PCMs help to provide a favorable environment for event onset. Heat budget analyses indicate that latitudinal transport in the lower atmosphere is the main contributor to regional cooling during CAO onset. This is partly offset by adiabatic warming associated with subsiding air. Additional diagnoses reveal that this latitudinal transport is partly due to the remote physical influence of a shallow cold pool of air trapped along the east side of the Rocky Mountains. ETE and PCM behavior is also studied in (CMIP5) climate model simulations. Although the climate models considered are able to represent the overall behavior of ETEs, the frequency of WWs (CAOs) is too high (low) in many models. While all models qualitatively replicate the overall structure of the PNA pattern, a small minority of models fails to properly simulate the NAO pattern. Model shortcomings in representing the NAO and PNA patterns have important consequences for simulating associated regional variability in surface air temperature and storm track behavior. The influence of PCMs on ETEs is underestimated in most CMIP5 models. In particular, none of the models are able to accurately simulate observed linkages between ETEs and the PDO, due to a gross misrepresentation of the PDO pattern in most models. Our results indicate that predictions of future CAO and WW behavior are currently limited by the ability of climate models to accurately represent PCM characteristics. Our study also considers the behavior of PCMs known as annular modes. It is determined that north-south movements in the stratospheric jet stream (related to the Polar Annular Mode) result in long-lasting impacts upon surface weather conditions including regional air temperature anomalies. The structure and dynamics of the stratospheric northern annular mode (or SNAM, related to changes in the strength of the stratospheric jet stream) was studied in CMIP5 models. In models with poorly-resolved stratospheres, the amplitude of SNAM at stratospheric altitudes is typically too weak, consistent with weaker stratospheric jet variability. However, this distinction does not carry over to the associated tropospheric signature of SNAM. A regional analysis illustrates that most CMIP5 models (regardless of whether the stratosphere is well-resolved) have anomalously weak and eastward shifted (compared to observed SNAM events) storm track and sea level pressure anomaly patterns during SNAM events. Analyses of stratosphere–troposphere coupling reveal that large-scale wave activity in the stratosphere is anomalously weak in CMIP5 models having poorly-resolved stratospheres, due to correspondingly weak upward propagation of wave activity from the troposphere. This suggests that such models have anomalously weak stratosphere-troposphere coupling in association with SNAM events. Paradoxically, however, there is little apparent impact upon the attendant tropospheric variability.

54 ENVIRONMENTAL SCIENCES↗

Retrieving 4-dimensional atmospheric boundary layer structure from surface observations and profiles over a single station

Most routine measurements from climate study facilities, such as the Department of Energy’s ARM SGP site, come from individual sites over a long period of time. While single-station data are very useful for many studies, it is challenging to obtain 3-dimensional spatial structures of atmospheric boundary layers that include prominent signatures of deep convection from these data. The principal objective of this project is to create realistic estimates of high-resolution (~ 1km × 1km horizontal grids) atmospheric boundary layer structure and the characteristics of precipitating convection. These characteristics include updraft and downdraft cumulus mass fluxes and cold pool properties over a region the size of a GCM grid column from analyses that assimilate surface mesonet observations of wind, temperature, and water vapor mixing ratio and available profiling data from single or multiple surface stations. The ultimate goal of the project is to enhance our understanding of the properties of mesoscale convective systems and also to improve their representation in analysis and numerical simulations. During the proposed period (09/15/2011–09/14/2014) and the no-cost extension period (09/15/2014–09/14/2015), significant accomplishments have been achieved relating to the stated goals. Efforts have been extended to various research and applications. Results have been published in professional journals and presented in related science team meetings and conferences. These are summarized in the report.

54 ENVIRONMENTAL SCIENCES↗

ARM Support for the Plains Elevated Convection at Night (AS-PECAN) Field Campaign Report

The Plains Elevated Convection at Night (PECAN) field campaign was a large multi-agency/multi-institutional experiment that targeted nighttime convection events in the central plains of the United States in order to better understand a range of processes that lead to the initiation and upscale growth of deep convection. Both weather and climate models struggle to properly represent the timing and intensity of precipitation in the central United States in their simulations. These models must be able to represent the interactions between the nocturnal stable boundary layer (SBL), the nocturnal low-level jet (LLJ), and a reservoir of convectively available potential energy (CAPE) that frequently exists above the SBL. Furthermore, a large fraction of the nocturnal precipitation is due to the organization of mesoscale convective systems (MCSs). In particular, there were four research foci for the PECAN campaign: •The initiation of elevated nocturnal convection focus seeks to elucidate the mesoscaleenvironmental characteristics and processes that lead to convection initiation (CI) and provide baseline data on the early evolution of mesoscale convective clusters. •The dynamics and internal structure and microphysics of nocturnal MCSs focus will investigatethe transition from surface-based to elevated storm structure, the interaction of cold pools generated by MCSs with the nocturnal stable boundary layer, and how the organization and evolution of elevated convection is influenced by the SBL and the vertical profile of wind and stability above the LLJ. •The bores and wave-like disturbances focus seeks to advance knowledge of the initiation of boredisturbances by convection, how the vertical profile of stability and winds modulate bore structure, the role of these disturbances in the initiation, maintenance, and organization of deep convection, and their impact on the LLJ and SBL. •The LLJ focus seeks to understand the processes that influence the spatial and temporal evolutionof the LLJ, how it affects the SBL, and the interaction between the LLJ and atmospheric boundaries in the development of CI.

54 ENVIRONMENTAL SCIENCES↗

Truly horizontal finite difference scheme in the WRF model FY18 Q1 Update

A main goal of the Wind Forecasting Improvement Project 2 (WFIP2) is to improve performance of the Weather Research and Forecasting (WRF) model over complex terrain. Two methods for improving model performance were outlined in the LLNL WFIP 2 annual operating plan. The first is modification to WRF’s horizontal finite difference scheme to utilize an improved numerical stencil. A second proposed model improvement is use of the immersed boundary method within the WRF model to facilitate improved simulations over complex terrain. In Q1, work focused on implementing an alternative finite difference scheme, with a deliverable of a project update. The alternative finite difference method was implemented for the temperature variable and shown to improve our selected test case, and recommendations are made to continue the work in Q2. In Q2 the focus should be on extending the method to additional model variables, mainly pressure, as well as to real test cases, such as the WFIP 2 cold pool test case. Additionally, use of the immersed boundary method will be pursed in Q2 and Q3, with a second project update due at the end of Q3.

17 WIND ENERGY↗

A Lagrangian Study of the Transition from Shallow to Deep Convection Using ASR Observations and Les Simulations (Final Report)

With the support from this grant, we have made the following accomplishments. We have found that a formula for fractional entrainment rate, a key aspect for parameterization moist convection, that works for both shallow and deep convection, which provide a promising direction for unified treatment of entrainment for both shallow and deep convection. We also examined the formulation of vertical velocity and showed that the effect of non-hydrostatic pressure and entrainment on vertical velocity are not constants, as assumed in past studies, but can be computed using a simple model for the cloudy updrafts. These results also apply to both deep and shallow convection, which opens the door for a more physically based parameterization of the updraft vertical velocity. We have also conducted extensive analysis of the RACORO aircraft data and have published the results in Wei et al. (2020). We have made extensive effort scrutinizing the data in detail and examining the various hypotheses with the aid of the LES simulations. This was the first application of the modified Paluch diagram on modern aircraft data and the first comprehensive analysis of mixing in clouds using real data (instead of only LES output) in a very long time. These analyses enhanced the science return of the ASR aircraft measurements. This grant also supported a study of the collisions among cold pools and an effort to build parameterizations of moist convection using tools developed in control theory.

42 ENGINEERING↗