Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “classical density functional theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Directed Hydrogen Bond Placement: Low Viscosity Amine Solvents for CO2 Capture

Capture of CO2 from power generation is required for its conversion or sequestration. Toward this goal, numerous CO2 capture processes have been developed, with the most widely deployed technology utilizing aqueous solutions of amines. Our group has focused on the design of several classes of water-lean solvents in order to identify molecular-level descriptors to control materials properties such as viscosity and regeneration energy. Large scale molecular simulations have shown that strategic placement of hydrogen bonding and tuning of the acid/base equilibria are critical for controlling viscosity at CO2-rich loadings. Here, we extend these principles to a new class of pyridine-based molecules with a secondary amine functionality for binding CO2. The result is a class of water-lean amines that retain high gravimetric capacity (20%) while exhibiting the lowest CO2-rich viscosities (<150 cP, 40 °C) of any 100% concentrated amine currently known. Additionally, these newly identified solvents exhibit regeneration temperatures as low as 60 °C when applying a polarity swing assisted regeneration, resulting in a solvent that can conceptually absorb and desorb CO2 with only a 20 °C temperature swing.

Malhotra, Deepika↗

Insights into the coal extractive solvent N-methyl-2-pyrrolidone + carbon disulfide

A wide set of experimental and computational tools were used to characterize the N-methyl-2-pyrrolidone (NMP) + carbon disulfide mixed solvent in the full composition range. The interest in this solvent rose from its very efficient use for coal extraction through a mechanism still not fully understood. Thermophysical properties at ambient pressure together with pressure-volume-temperature (PVT) behavior were measured with the objective of providing the required data for the industrial use of the mixed fluid and to get insight into the fluid structure at the molecular level. NMR, FTIR, and solvatochromic studies were performed together with microwave dielectric relaxation spectroscopy (DRS) measurements, thus providing more information on the fluid's structure and allowing one to relate the molecular level behavior with the measured macroscopic properties. Moreover, density functional theory (DFT) and classical molecular dynamics simulations (MD) were used to obtain a detailed picture of the intermolecular interactions within the fluid, at short and long ranges, and of other relevant features leading to the structure of the studied system. The whole study leads to a fluid's picture in which carbon disulfide hinders the development of NMP/NMP intermolecular dipolar interactions, thus increasing the monomer population. We should remark that some properties reported in this work are in remarkable disagreement with previously reported studies, the most important one being the positive excess molar volume in the whole pressure-temperature range studied, which contrasts with the negative values reported in the literature. Previously reported properties are hardly justified with a coherent molecular level picture, whereas the whole collection of properties reported in this work leads to a more reasonable fluid's structure. 56 refs., 17 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Interpreting Vibrational Sum-frequency Spectra of Sulfur Dioxide at the Air/Water Interface: A Comprehensive Molecular Dynamics Study

We investigated the solvation and spectroscopic properties of SO2 at the air/water interface using molecular simulation techniques. Molecular interactions from both Kohn-Sham (KS) density functional theory (DFT) and classical polarizable models were utilized to understand the properties of SO2:(H2O)x complexes in the vicinity of the air/water interface. The KS-DFT was included to allow comparisons with sum-frequency generation spectroscopy through the identification of surface SO2:(H2O)x complexes. Using our simulation results, we were able to develop a much more detailed picture for the surface structure of SO2 that is consistent with the spectroscopic data obtained Richmond and coworkers (J. Am. Chem. Soc. 127, 16806 (2005)). We also found many similarities and differences between to the two interaction potentials, including a noticeable weakness of the classical potential model in reproducing the asymmetric hydrogen bonding of water with SO2 due to its inability to account for SO2 resonance structures. This work was supported by the US Department of Energy Basic Energy Sciences' Chemical Sciences, Geosciences & Biosciences Division. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

08 HYDROGEN↗

AC/AB Stacking Boundaries in Bilayer Graphene

Boundaries, including phase boundaries, grain boundaries, and domain boundaries, are known to have an important influence on material properties. Here, dark-field (DF) transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) imaging are combined to provide a full view of boundaries between AB and AC stacking domains in bilayer graphene across length scales from discrete atoms to the macroscopic continuum. Combining the images with results obtained by density functional theory (DFT) and classical molecular dynamics calculations, we demonstrate that the AB/AC stacking boundaries in bilayer graphene are nanometer-wide strained channels, mostly in the form of ripples, producing smooth low-energy transitions between the two different stackings. Our results provide a new understanding of the novel stacking boundaries in bilayer graphene, which may be applied to other layered two-dimensional materials as well.

Lin, Junhao↗

Direct Exchange Mechanism for Interlayer Ions in Non-Swelling Clays

The mobility of radiocesium in the environment is largely mediated by cation exchange in micaceous clays, in particular Illite—a non-swelling clay mineral that naturally contains interlayer K + and has high affinity for Cs + . Although exchange of interlayer K + for Cs + is nearly thermodynamically nonselective, recent experiments show that direct, anhydrous Cs + -K + exchange is kinetically viable and leads to the formation of phase-separated interlayers through a mechanism that remains unclear. Here, using classical atomistic simulations and density functional theory calculations, we identify a molecular-scale positive feedback mechanism in which exchange of the larger Cs + for the smaller K + significantly lowers the migration barrier of neighboring K + , allowing exchange to propagate rapidly once initiated at the clay edge. Barrier lowering upon slight increase in layer spacing (~0.7 Å) during Cs + exchange is an example of “chemical-mechanical coupling” that likely explains the observed sharp exchange fronts leading to interstratification. Interestingly, we find that these features are thermodynamically favored even in the absence of a heterogeneous layer charge distribution.

Ruiz Pestana, Luis↗

Communication: Dynamical embedding: Correct quantum response from coupling TDDFT for a small cluster with classical near-field electrodynamics for an extended region

We show how to obtain the correct electronic response of a large system by embedding; a small region is propagated by TDDFT (time-dependent density functional theory) simultaneously with a classical electrodynamics evolution using the Near-Field method over a larger external region. The propagations are coupled through a combined time-dependent density yielding a common Coulomb potential. We show that the embedding correctly describes the plasmonic response of a Mg(0001) slab and its influence on the dynamical charge transfer between an adsorbed H{sub 2}O molecule and the substrate, giving the same spectral shape as full TDDFT (similar plasmon peak and molecular-dependent differential spectra) with much less computational effort. The results demonstrate that atomistic embedding electrodynamics is promising for nanoplasmonics and nanopolaritonics.

36 MATERIALS SCIENCE↗

Time-dependent density functional theory for the charging kinetics of electric double layer containing room-temperature ionic liquids

Understanding the charging kinetics of electric double layers is of fundamental importance for the design and development of novel electrochemical devices such as supercapacitors and field-effect transistors. In this paper, we study the dynamic behavior of room-temperature ionic liquids using a classical time-dependent density functional theory that accounts for the molecular excluded volume effects, the electrostatic correlations, and the dispersion forces. While the conventional models predict a monotonic increase of the surface charge with time upon application of an electrode voltage, our results show that dispersion between ions results in a non-monotonic increase of the surface charge with the duration of charging. Finally and furthermore, we investigate the effects of van der Waals attraction between electrode/ionic-liquid interactions on the charging processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamics of Liquid Uranium from Atomistic and Ab Initio Modeling

We present thermodynamic properties for liquid uranium obtained from classical molecular dynamics (MD) simulations and the first-principles theory. The coexisting phases method incorporated within MD modeling defines the melting temperature of uranium in good agreement with the experiment. The calculated melting enthalpy is in agreement with the experimental range. Classical MD simulations show that ionic contribution to the total specific heat of uranium does not depend on temperature. The density of states at the Fermi level, which is a crucial parameter in the determination of the electronic contribution to the total specific heat of liquid uranium, is calculated by ab initio all electron density functional theory (DFT) formalism applied to the atomic configurations generated by classical MD. The calculated specific heat of liquid uranium is compared with the previously calculated specific heat of solid γ-uranium at high temperatures. The liquid uranium cannot be supercooled below T sc ≈ 800 K or approximately about 645 K below the calculated melting point, although, the self-diffusion coefficient approaches zero at T D ≈ 700 K. Uranium metal can be supercooled about 1.5 times more than it can be overheated. The features of the temperature hysteresis are discussed.

36 MATERIALS SCIENCE↗

The symmetric quasi-classical model using on-the-fly time-dependent density functional theory within the Tamm–Dancoff approximation

The primary computational challenge when simulating nonadiabatic ab initio molecular dynamics is the unfavourable compute costs of electronic structure calculations with molecular size. Simple electronic structure theories, like time-dependent density functional theory within the Tamm–Dancoff approximation (TDDFT/TDA), alleviate this cost for moderately sized molecular systems simulated on realistic time scales. Although TDDFT/TDA does have some limitations in accuracy, an appealing feature is that, in addition to including electron correlation through the use of a density functional, the cost of calculating analytic nuclear gradients and nonadiabatic coupling vectors is often computationally feasible even for moderately sized basis sets. Here in this work, some of the benefits and limitations of TDDFT/TDA are discussed and analysed with regard to its applicability as a ‘back-end’ electronic structure method for the symmetric quasi-classical Meyer–Miller model (SQC/MM). In order to investigate the benefits and limitations of TDDFT/TDA, SQC/MM is employed to predict and analyse a prototypical example of excited-state hydrogen transfer in gas-phase malonaldehyde. Then, the ring-opening dynamics of selenophene are simulated, which highlight some of the deficiencies of TDDFT/TDA. Additionally, some new algorithms are proposed that speed up the calculation of analytic nuclear gradients and nonadiabatic coupling vectors for a set of excited electronic states.

molecular dynamics↗

Thickness and strain effects on the thermoelectric transport in nanostructured Bi{sub 2}Se{sub 3}

The structural stability, electronic structure, and thermal transport properties of one to six quintuple layers (QLs) of Bi{sub 2}Se{sub 3} are investigated by van der Waals density functional theory and semi-classical Boltzmann theory. The bandgap amounts to 0.41 eV for a single QL and reduces to 0.23 eV when the number of QLs increases to six. A single QL has a significantly higher thermoelectric figure of merit (0.27) than the bulk material (0.10), which can be further enhanced to 0.30 by introducing 2.5% compressive strain. Positive phonon frequencies under strain indicate that the structural stability is maintained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental and theoretical study of rotationally inelastic diffraction of H{sub 2}(D{sub 2}) from methyl-terminated Si(111)

Fundamental details concerning the interaction between H{sub 2} and CH{sub 3}–Si(111) have been elucidated by the combination of diffractive scattering experiments and electronic structure and scattering calculations. Rotationally inelastic diffraction (RID) of H{sub 2} and D{sub 2} from this model hydrocarbon-decorated semiconductor interface has been confirmed for the first time via both time-of-flight and diffraction measurements, with modest j = 0 → 2 RID intensities for H{sub 2} compared to the strong RID features observed for D{sub 2} over a large range of kinematic scattering conditions along two high-symmetry azimuthal directions. The Debye-Waller model was applied to the thermal attenuation of diffraction peaks, allowing for precise determination of the RID probabilities by accounting for incoherent motion of the CH{sub 3}–Si(111) surface atoms. The probabilities of rotationally inelastic diffraction of H{sub 2} and D{sub 2} have been quantitatively evaluated as a function of beam energy and scattering angle, and have been compared with complementary electronic structure and scattering calculations to provide insight into the interaction potential between H{sub 2} (D{sub 2}) and hence the surface charge density distribution. Specifically, a six-dimensional potential energy surface (PES), describing the electronic structure of the H{sub 2}(D{sub 2})/CH{sub 3}−Si(111) system, has been computed based on interpolation of density functional theory energies. Quantum and classical dynamics simulations have allowed for an assessment of the accuracy of the PES, and subsequently for identification of the features of the PES that serve as classical turning points. A close scrutiny of the PES reveals the highly anisotropic character of the interaction potential at these turning points. This combination of experiment and theory provides new and important details about the interaction of H{sub 2} with a hybrid organic-semiconductor interface, which can be used to further investigate energy flow in technologically relevant systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational Study of Low Interlayer Friction in Ti n +1 C n ( n = 1, 2, and 3) MXene

The friction of adjacent Ti n +1 C n ( n = 1, 2, and 3) MXene layers is investigated using density functional theory (DFT) calculations and classical molecular dynamics simulations with ReaxFF potentials. The calculations reveal the sliding pathways in all three MXene systems with low energy barriers. The friction coefficients for interlayer sliding are evaluated using static calculations. Both DFT and ReaxFF methods predict friction coefficients between 0.24 and 0.27 for normal loads less than 1.2 GPa. The effect of titanium (Ti) vacancies in sublayers and terminal oxygen (O) vacancies at surfaces on the interlayer friction is further investigated using the ReaxFF potential. These defects are found to increase the friction coefficients by increasing surface roughness and creating additional attractive forces between adjacent layers. However, these defective MXenes still maintain friction coefficients below 0.31. Finally, we also consider functionalized Ti 3 C 2 MXene terminated with -OH and -OCH 3 and find that compared to the -O-terminated surface both groups further reduce the interlayer friction coefficient to 0.10–0.14.

36 MATERIALS SCIENCE↗

Instability, intermixing and electronic structure at the epitaxial LaAlO3/SrTiO3(001) heterojunction

The question of stability against diffusional mixing at the prototypical LaAlO3/SrTiO3(001) interface is explored using a multi-faceted experimental and theoretical approach. We combine analytical methods with a range of sensitivities to elemental concentrations and spatial separations to investigate interfaces grown using onaxis pulsed laser deposition. We also employ computational modeling based on the density function theory as well as classical force fields to explore the energetic stability of a wide variety of intermixed atomic configurations relative to the idealized, atomically abrupt model. Statistical analysis of the calculated energies for the various configurations is used to elucidate the relative thermodynamic stability of intermixed and abrupt configurations. We find that on both experimental and theoretical fronts, the tendency toward intermixing is very strong. We have also measured and calculated key electronic properties such as potential energy gradients and valence band discontinuity at the interface. We find no measurable electric field in either the LaAlO3 or SrTiO3, and that the valence band offset is near zero, partitioning the band discontinuity almost entirely to the conduction band edge. Significantly, we find it is not possible to account for these electronic properties theoretically without including extensive intermixing in our physical model of the interface. The atomic configurations which give the greatest electrostatic stability are those that eliminate the interface dipole by intermixing, calling into question the conventional explanation for conductivity at this interface – electronic reconstruction. Rather, evidence is presented for La indiffusion and doping of the SrTiO3 below the interface as being the cause of the observed conductivity.

36 MATERIALS SCIENCE↗

NENCI-2021. I. A large benchmark database of non-equilibrium non-covalent interactions emphasizing close intermolecular contacts

In this work, we present NENCI-2021, a benchmark database of ~8000 Non-Equilibirum Non-Covalent Interaction energies for a large and diverse selection of intermolecular complexes of biological and chemical relevance. To meet the growing demand for large and high-quality quantum mechanical data in the chemical sciences, NENCI-2021 starts with the 101 molecular dimers in the widely used S66 and S101 databases and extends the scope of these works by (i) including 40 cation–π and anion–π complexes, a fundamentally important class of non-covalent interactions that are found throughout nature and pose a substantial challenge to theory, and (ii) systematically sampling all 141 intermolecular potential energy surfaces (PESs) by simultaneously varying the intermolecular distance and intermolecular angle in each dimer. Designed with an emphasis on close contacts, the complexes in NENCI-2021 were generated by sampling seven intermolecular distances along each PES (ranging from 0.7× to 1.1× the equilibrium separation) and nine intermolecular angles per distance (five for each ion–π complex), yielding an extensive database of 7763 benchmark intermolecular interaction energies (E int ) obtained at the coupled-cluster with singles, doubles, and perturbative triples/complete basis set [CCSD(T)/CBS] level of theory. The E int values in NENCI-2021 span a total of 225.3 kcal/mol, ranging from -38.5 to +186.8 kcal/mol, with a mean (median) E int value of -1.06 kcal/mol (-2.39 kcal/mol). In addition, a wide range of intermolecular atom-pair distances are also present in NENCI-2021, where close intermolecular contacts involving atoms that are located within the so-called van der Waals envelope are prevalent—these interactions, in particular, pose an enormous challenge for molecular modeling and are observed in many important chemical and biological systems. A detailed symmetry-adapted perturbation theory (SAPT)- based energy decomposition analysis also confirms the diverse and comprehensive nature of the intermolecular binding motifs present in NENCI-2021, which now includes a significant number of primarily induction-bound dimers (e.g., cation–π complexes). NENCI-2021 thus spans all regions of the SAPT ternary diagram, thereby warranting a new four-category classification scheme that includes complexes primarily bound by electrostatics (3499), induction (700), dispersion (1372), or mixtures thereof (2192). A critical error analysis performed on a representative set of intermolecular complexes in NENCI-2021 demonstrates that the E int values provided herein have an average error of ±0.1 kcal/mol, even for complexes with strongly repulsive E int values, and maximum errors of ±0.2–0.3 kcal/mol (i.e., ~±1.0 kJ/mol) for the most challenging cases. For these reasons, we expect that NENCI-2021 will play an important role in the testing, training, and development of next-generation classical and polarizable force fields, density functional theory approximations, wavefunction theory methods, and machine learning based intra- and inter-molecular potentials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Machine Learning for First Principles Calculations of Material Properties for Ferromagnetic Materials

The investigation of finite temperature properties using Monte-Carlo (MC) methods requires a large number of evaluations of the system’s Hamiltonian to sample the phase space needed to obtain physical observables as function of temperature. DFT calculations can provide accurate evaluations of the energies, but they are too computationally expensive for routine simulations. To circumvent this problem, machine-learning (ML) based surrogate models have been developed and implemented on high-performance computing (HPC) architectures. In this paper, we describe two ML methods (linear mixing model and HydraGNN) as surrogates for first principles density functional theory (DFT) calculations with classical MC simulations. These two surrogate models are used to learn the dependence of target physical properties from complex compositions and interactions of their constituents. We present the predictive performance of these two surrogate models with respect to their complexity while avoiding the danger of overfitting the model. An important aspect of our approach is the periodic retraining with newly generated first principles data based on the progressive exploration of the system’s phase space by the MC simulation. The numerical results show that HydraGNN model attains superior predictive performance compared to the linear mixing model for magnetic alloy materials.

Eisenbach, Markus↗

Theoretical Evidence of Solvent-Mediated Excited-State Dynamics in a Functionalized Iron Sensitizer

The solvent-mediated excited-state dynamics of the COOH-functionalized Fe-carbene photosensitizer [Fe(bmicp) 2 ] 2+ (bmicp = 2,6-bis(3-methyl-imidazole-1-ylidine)-4-carboxy-pyridine) is studied by time-dependent density functional theory, as well as classical and quantum dynamics simulations. We demonstrate the crucial role of the polar acetonitrile solvent in stabilizing the metal-to-ligand charge transfer (MLCT) states of the investigated molecule using the conductor polarizable continuum model. This leads to dynamics that avoid sub-ps back electron transfer to the metal and an exceptionally long-lived 1 MLCT state that does not undergo sub-ps 1 MLCT → 3 MLCT intersystem crossing as it is energetically isolated. We identify two components of the excited-state solvent reorganization process: an initial rotation (~300 fs) and diffusional dynamics within the local cage surrounding the rotated solvent molecule (~2 ps). Lastly, it is found that the relaxation of the solvent only slightly affects the excited-state population dynamics of [Fe(bmicp) 2 ] 2+ .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Prediction of high strain polar phases in antiferroelectric PbZrO 3 from multiscale approach

PbZrO 3 is regarded as the first antiferroelectric and currently under intense reexamination. We propose a multiscale approach that combines classical and first principles density functional theory based simulations to explore polar phases in this material. Application of this approach to PbZrO 3 predicts three polar phases, none of which is the common $R3c$. The lowest energy polar phase - $Cc$ - is metastable at zero Kelvin but can be stabilized by application of electric field. Its structural and polarization response to the electric field is in good agreement with experimental data from the literature. The other two phases are $Ima2$ and $I4cm$ of orthorhombic and tetragonal symmetry, respectively, and predicted to stabilize at finite temperatures and under application of larger electric fields. These two phases exhibit very large strain which is of technological significance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗