Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cell structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Thermocapillary-driven convection in supported and floating-zone crystallization

Marangoni flow was induced in a thin disk of molten tin with an atomically clean surface by heating it from below in an ultra high vacuum apparatus. The radial distribution of temperature was measured and no temperature oscillations were observed. Strong mechanical disturbances introduced at a Marangoni number of about 4300 died out quickly with time indicating that the system was stable. Mathematical models indicate that strong flows in a two cell structure exist under the conditions studied, and that the velocity profile in the cell near the surface is of the boundary layer type which varies rapidly with depth.

Gill, W. N.↗
NASA NTRS1976

Epitaxial silicon solar cells

P+/p/n/n+ epitaxial silicon solar-cell structures were fabricated with the n-base region intentionally graded over 2 orders of magnitude in a thickness of 35 microns. Solar cells made from these layers exhibited near-ideal I-V characteristics in the practical operating range, with an open-circuit voltage of 636 mV, fill factor of 0.79, and AM1 efficiency of 12.6%. A similar epitaxial structure containing no gradient in the n-base showed good solar-cell performance but lower open-circuit voltage (603 mV).

Daiello, R. V.↗
NASA NTRS1973

Interhemispheric comparison of atmospheric circulation features as evaluated from Nimbus satellite data

Atmospheric structure derived from satellite, multichannel radiance data is used to calculate zonally averaged vertical motions in the wintertime stratosphere of both hemispheres using a heat budget approach. The Northern Hemisphere calculations based on the satellite data are shown to compare favorably with a computation carried out with conventional data, and with results of previous studies. The mean Southern Hemisphere pattern for the month of July 1969 indicates a two-celled structure with the high latitude cell centered at 60-65S. The axis of sinking motion in this cell is at approximately 50S, while the rising motion is centered at 70S. Thus the Antarctic stratospheric jet stream is associated with an indirect cell. Two individual ten-day periods from July 1969 are examined to compare the mean meridional circulation and eddy heat flux patterns in the Southern Hemisphere during a minor midwinter warming and during a quiet period.

Reiter, E. R.↗
NASA NTRS1978

Statistical models of summer rainshowers derived from fine-scale radar observations

A statistical modeling of rain cell characteristics is presented; the modeling is based on high-resolution radar measurements of the cell structure. The analysis of the fine-scale three-dimensional structure of summer rainshowers in the mid-Atlantic region leads to statistical descriptions of the rain cells in terms of a variety of physical cell parameters. Core reflectivity profiles, contour area, and altitude extent of the cells have been determined along with the frequency of occurrence for various storm classes and categories. The statistical descriptions of the rain cells for the mid-Atlantic region were compared to descriptions for other areas, and the similarities and differences are described. Simplified models of rain cells based on the statistical descriptions are developed for the different rain categories as a function of frequency of occurrence.

Konrad, T. G.↗
NASA NTRS1986

Etching Silicon Films With Xenon Difluoride

Microscopic circuit structures prepared for probing. Xenon difluoride removes relatively large amounts of silicon from integratedcircuit or solar-cell structures while leaving SiO2, Si3N4, Al2O3, and other compounds intact. In Etching Apparatus, solid XeF2 sublimated in vacuum, then allowed to flow over sample at controlled rate and pressure. Wafer etched from back to expose SiO2 and Al layers for spectroscopic analysis of SiO2/Al interface. Using XeF2 technique, silicon wafer with oxide layer reduced in thickness from standard 300 micrometer to as little as 10 nanometer without adversely affecting oxide.

Hecht, M. H.↗
NASA NTRS1980

GaAs homojunction solar cell development

The Lincoln Laboratory n(+)/p/p(+) GaAs shallow homojunction cell structure was successfully demonstrated on 2 by 2 cm GaAs substrates. Air mass zero efficiencies of the seven cells produced to date range from 13.6 to 15.6 percent. Current voltage (I-V) characteristics, spectral response, and measurements were made on all seven cells. Preliminary analysis of 1 MeV electron radiation damage data indicate excellent radiation resistance for these cells.

Flood, D. J.↗
NASA NTRS1986

Process research of non-Czochralski silicon material

Simultaneous diffusion of liquid precursors containing phosphorus and boron into dendritic web silicon to form solar cell structures was investigated. A simultaneous junction formation techniques was developed. It was determined that to produce high quality cells, an annealing cycle (nominal 800 C for 30 min) should follow the diffusion process to anneal quenched-in defects. Two ohm-cm n-base cells were fabricated with efficiencies greater than 15%. A cost analysis indicated that the simultansous diffusion process costs can be as low as 65% of the costs of the sequential diffusion process.

Campbell, R. B.↗
NASA NTRS1989

Endjoints For Structural Elements

Endjoint and connecting-node system designed for use in erection of frames. System structurally sound and simple to operate. All nodes and struts interchangeable. Nodes and struts attach to form cubic cell structures to produce beams, platforms, towers, or combinations of these. Design suitable for use in construction of space structures and such terrestrial skeletal frameworks as antenna-reflector supports, roof structures for large buildings, lookout towers, radio-transmitter towers, powerline pylons, and scaffolds.

Bush, Harold G.↗
NASA NTRS1988

Carbon dioxide electrolysis with solid oxide electrolyte cells for oxygen recovery in life support systems

The direct electrochemical reduction of carbon dioxide (CO2) is achieved without catalysts and at sufficiently high temperatures to avoid carbon formation. The tubular electrolysis cell consists of thin layers of anode, electrolyte, cathode and cell interconnection. The electrolyte is made from yttria-stabilized zirconia which is an oxygen ion conductor at elevated temperatures. Anode and cell interconnection materials are complex oxides and are electronic conductors. The cathode material is a composite metal-ceramic structure. Cell performance characteristics have been determined using varying feed gas compositions and degrees of electrochemical decomposition. Cell test data are used to project the performance of a three-person CO2-electrolysis breadboard system.

Isenberg, Arnold O.↗
NASA NTRS1991

FIESTA ROC: A new finite element analysis program for solar cell simulation

The Finite Element Semiconductor Three-dimensional Analyzer by Ralph O. Clark (FIESTA ROC) is a computational tool for investigating in detail the performance of arbitrary solar cell structures. As its name indicates, it uses the finite element technique to solve the fundamental semiconductor equations in the cell. It may be used for predicting the performance (thereby dictating the design parameters) of a proposed cell or for investigating the limiting factors in an established design.

Clark, Ralph O.↗
NASA NTRS2016

An Experimental Investigation of Jet Noise from Septa Nozzles

Results of an experimental study with a large aspect ratio rectangular nozzle, divided into multiple compartments or septa, as pertinent to distributed propulsion, are presented. Noise measurements at high-subsonic conditions show that the nozzle with the septa is quieter than the corresponding baseline nozzle without the septa. At relatively lower Mach numbers a high-frequency tone is heard. This is shown to be due to Karmann vortex shedding from the trailing edge of the partitions that separate a septum from the adjacent ones. Flowfield measurements for a six septa case show that the cellular flow structure, issuing from the nozzle, goes through a curious coalescence with increasing downstream distance (x) from the nozzle. Adjacent cells pair to yield a three-cell structure by x/D =2, where D is the equivalent diameter of the baseline nozzle. By about x/D =16, both the septa case and the baseline case evolve to yield axisymmetric flowfields.

turbulence↗
NASA NTRS2005

Physics of Quantum Structures in Photovoltaic Devices

There has been considerable activity recently regarding the possibilities of using various nanostructures and nanomaterials to improve photovoltaic conversion of solar energy. Recent theoretical results indicate that dramatic improvements in device efficiency may be attainable through the use of three-dimensional arrays of zero-dimensional conductors (i.e., quantum dots) in an ordinary p-i-n solar cell structure. Quantum dots and other nanostructured materials may also prove to have some benefits in terms of temperature coefficients and radiation degradation associated with space solar cells. Two-dimensional semiconductor superlattices have already demonstrated some advantages in this regard. It has also recently been demonstrated that semiconducting quantum dots can also be used to improve conversion efficiencies in polymeric thin film solar cells. Improvement in thin film cells utilizing conjugated polymers has also be achieved through the use of one-dimensional quantum structures such as carbon nanotubes. It is believed that carbon nanotubes may contribute to both the disassociation as well as the carrier transport in the conjugated polymers used in certain thin film photovoltaic cells. In this paper we will review the underlying physics governing some of the new photovoltaic nanostructures being pursued, as well as the the current methods being employed to produce III-V, II-VI, and even chalcopyrite-based nanomaterials and nanostructures for solar cells.

Raffaelle, Ryne P.↗
NASA NTRS1976

Computer analysis of heterojunction and graded bandgap solar cells

The development and application of a graded bandgap solar cell computer analysis program is discussed. The basic device equations as used in the computer analysis are discussed and the techniques used to model material parameter variations are described. Finally, the results of the computer analysis of several Al(x)Ga(1-x)As and GaAs(1-x)P(x) solar cell structures are presented along with a discussion of the effects of interface states and various composition profiles on maximum solar cell efficiency.

Sutherland, J. E.↗
NASA NTRS1991

Two-terminal monolithic InP-based tandem solar cells with tunneling intercell ohmic connections

A monolithic two-terminal InP/InGaAsP tandem solar cell was successfully fabricated. This tandem solar cell consists of a p/n InP homojunction top subcell and a 0.95 eV p/n InGaAsP homojunction bottom subcell. A patterned 0.95 eV n(+)/p(+) InGaAsP tunnel diode was employed as an intercell ohmic connection. The solar cell structure was prepared by two-step liquid phase epitaxial growth. Under one sun, AM1.5 global illumination, the best tandem cell delivered a conversion efficiency of 14.8 pct.

Shen, C. C.↗
NASA NTRS1980

Process for the manufacture of low density bis-maleimide-carbon microballoon composites

A process for the preparation of composite laminate structures of glass cloth preimpregnated with polybismaleimide resin and adhered to a polybismaleimide-glass or aromatic polyamide paper honeycomb cell structure filled or partially filled with a syntactic foam consisting of a mixture of bismaleimide resin and carbon microballoons. The carbon microballoons are prepared by pyrolyzing phenolic microballoons and subsequently bonded using a 2% bismaleimide solution. The laminate structures are cured for two hours at 477.degree. K. and are adhered to the honeycomb bismaleimide adhesive using a pressure of 700 kN/m.sup.2 pressure at 450.degree. K. The laminate composite is then post-cured for two hours at 527.degree. K. to produce a composite laminate having a density in the range from about 95 kilograms per cubic meter to 130 kilograms per cubic meter.

Kourtides, Demetrius A.↗
NASA NTRS1977

A computer analysis of heterojunction and graded composition solar cells

The development and application of a variable composition solar cell computer analysis program is discussed. The basic device equations are derived and results of the computer analysis of several Al(x)Ga(1-x)As and GaAs(1-x)P(x) solar cell structures are presented along with a discussion of the effects of interface states and various composition and doping profiles on maximum solar cell efficiency. Interface states are found to be responsible for a severe reduction in the efficiency of GaAs(1-x)P(x) cells, but do not significantly affect the behavior of Al(x)Ga(1-x)As cells. The depth of the p-n junction below the wide bandgap window layer is a critical factor in determining the loss of minority carriers to interface recombination at the heterojunction.

Sutherland, J. E.↗
NASA NTRS1974

The response of single human cells to zero gravity

The SO15 experiment was designed to extend observations of the effects of zero-gravity to living human cells during and subsequent to a 59-day flight on Skylab 3. A strain of diploid human embryonic lung cells, WI-38, was chosen for this purpose. The studies were concerned with observations designed to detect the effects of zero-gravity on cell growth rates and on cell structure as observed by light microscopy, transmission and scanning electron microscopy and histochemistry. Studies of the effects of zero-gravity on the cell function and the cell cycle were performed by time lapse motion picture photography and microspectrophotometry. Subsequent study of the returned living cells included karotyping, G- and C-banding, and analyses of the culture media used. Some of the living cells returned were banked by deep freeze techniques for possible future experiments.

Montgomery, P. O., Jr.↗