Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “burn model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Simulation and Reynolds-averaged Navier-Stokes modeling of a three-component Rayleigh-Taylor mixing problem with thermonuclear burn

Rayleigh-Taylor mixing in the presence of a third component with intermediate density is investigated through three-dimensional large-eddy simulation (LES) with a high-order compact finite-difference code. Two configurations are considered: (1) a symmetric configuration in which the Atwood number between the heavy and intermediate components matches the Atwood number between the intermediate and light components and (2) an asymmetric configuration in which the Atwood number between the heavy and intermediate components is an order of magnitude greater than the Atwood number between the intermediate and light components. Mass fraction covariances are extracted, and proposed Reynolds-averaged Navier-Stokes (RANS) closures for density-specific-volume and density-mass-fraction covariances are evaluated in an a priori fashion. Additionally, a multicomponent extension of the k - Φ - L - a - V RANS model [Morgan, Phys. Rev. E 104, 015107 (2021)] is presented which includes model equations for the upper-triangular elements of the mass fraction covariance matrix. This model, referred to as the k - Φ - L - a - C model, is compared against results from LES and against other RANS models. Profiles of average mass fraction, mass-fraction covariance, and density-specific-volume covariance obtained with the k - Φ - L - a - C model are found to agree well with LES data. Finally, the impact of three-component turbulent mixing on average reaction rate is investigated in both premixed and nonpremixed cases by heating the mixing layer and allowing it to undergo thermonuclear (TN) burn. A closure model for average reaction rate is proposed for use with the k - Φ - L - a - C model, and when this model is applied, improved agreement is obtained between LES and RANS in total TN neutron production.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

ELM2.1-XGBfire1.0: improving wildfire prediction by integrating a machine learning fire model in a land surface model

Wildfires have shown increasing trends in both frequency and severity across the contiguous United States (CONUS). However, process-based fire models have difficulties in accurately simulating the burned area over the CONUS due to a simplification of the physical process and cannot capture the interplay among fire, ignition, climate, and human activities. The deficiency of burned area simulation deteriorates the description of fire impact on energy balance, water budget, and carbon fluxes in the Earth system models (ESMs). Alternatively, fire models based on machine learning (ML), which capture statistical relationships between the burned area and environmental factors, have shown promising burned area predictions and corresponding fire impact simulation. We develop a hybrid framework (ELM2.1-XGBFire1.0) that integrates an eXtreme Gradient Boosting (XGBoost) wildfire model with the Energy Exascale Earth System Model (E3SM) land model (ELM) version 2.1. A Fortran–C–Python deep learning bridge is adapted to support online communication between ELM and the ML fire model. Specifically, the burned area predicted by the ML-based wildfire model is directly passed to ELM to adjust the carbon pool and vegetation dynamics after disturbance, which are then used as predictors in the ML-based fire model in the next time step. Evaluated against the historical burned area from Global Fire Emissions Database 5 from 2001–2019, the ELM2.1-XGBFire1.0 outperforms process-based fire models in terms of spatial distribution and seasonal variations. The ELM2.1-XGBFire1.0 has proven to be a new tool for studying vegetation–fire interactions and, more importantly, enables seamless exploration of climate–fire feedback, working as an active component of E3SM.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Chromium Nucleosynthesis and Silicon–Carbon Shell Mergers in Massive Stars

In this work, we analyze the production of the element Cr in galactic chemical evolution (GCE) models using the NuGrid nucleosynthesis yields set. We show that the unusually large [Cr/Fe] abundance at [Fe/H] ≈ 0 reported by previous studies using those yields and predicted by our Milky Way model originates from the merging of convective Si-burning and C-burning shells in a 20 ${M}_{\odot }$ model at metallicity Z = 0.01, about an hour before the star explodes. This merger mixes the incomplete burning material in the Si shell, including 51 V and 52 Cr, out to the edge of the carbon/oxygen (CO) core. The adopted supernova model ejects the outer 2 ${M}_{\odot }$ of the CO core, which includes a significant fraction of the Cr-rich material. When including this 20 M⊙ model at Z = 0.01 in the yields interpolation scheme of our GCE model for stars between 15 and 25 ${M}_{\odot }$, we overestimate [Cr/Fe] by an order of magnitude at [Fe/H] ≈ 0 relative to observations in the Galactic disk. This raises a number of questions regarding the occurrence of Si–C shell mergers in nature, the accuracy of different simulation approaches, and the impact of such mergers on the presupernova structure and explosion dynamics. According to the conditions in this 1D stellar model, the substantial penetration of C-shell material into the Si shell could launch a convective–reactive global oscillation if a merger does take place. In any case, GCE provides stringent constraints on the outcome of this stellar evolution phase.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Laser propagation in a subcritical foam: Subgrid model

Here, we present a subgrid model for laser propagation in a subcritical foam. Our model describes the expansion of laser-irradiated foam elements that are below the resolution of the simulation grid and predicts the plasma conditions that result from burning down the foam. Our model can be included as a module within a larger multiphysics code, and we have implemented it within the code pF3D, which is used for simulating a laser-plasma interaction. The model predicts a reduced propagation velocity for a laser through a subcritical foam compared to simulating that foam as a homogeneous gas. This is attributed to the laser energy that goes into burning down the foam microstructure. We compare our model against experimental data by simulating a 2 mg/cc SiO 2 foam shot performed at the Janus laser facility at the Lawrence Livermore National Laboratory. pF3D simulations with the foam model predict hot ion temperatures. This leads to a reduction in the level of stimulated Brillouin scattering (SBS), bringing the simulated level of SBS into agreement with the data. Intensity fluctuations at the foam front due to laser speckles and refraction result in ion temperature fluctuations when the foam burns down. These drive long-lived electron density fluctuations on scales that are large compared to the pore size.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Autoignition of cyclohexane at low-to-intermediate temperatures: Rapid compression machine experiments and improved comprehensive chemical kinetic model

Cycloalkanes are an important class of hydrocarbons found in conventional and alternative transportation fuels. Being one of the simplest practical cycloalkanes, cyclohexane is often used as a surrogate in studies to understand the oxidation, ignition, and sooting characteristics of cycloalkanes more broadly. Although cyclohexane has been extensively studied, very limited datasets for cyclohexane oxidation at low-to-intermediate temperatures are available in the literature. Moreover, the literature autoignition data from rapid compression machines (RCMs) did not provide information on volume histories or experimental heat transfer characteristics which can significantly impact model predictions, thereby hindering the detailed validation of chemical kinetic models. It has also been observed that the cyclohexane kinetic models developed so far are not able to predict the literature data across a wide range of operating and mixture conditions. Hence, further studies are recommended to understand and improve model predictions for cyclohexane oxidation. In this study, RCM experiments were conducted using cyclohexane/air mixtures at varying compressed pressures (P C =15, 20, and 30 bar), equivalence ratios (ϕ=0.5, 1.0, and 2.0), and compressed temperatures (T C =670–960 K). The current RCM results of cyclohexane were found to complement well with the literature data, with the first-stage IDTs at high pressures and volume histories at all test conditions being first reported for better development and validation of chemical kinetic models. Additionally, a detailed chemical kinetic model for the cyclohexane oxidation has been developed and validated using both newly acquired experimental IDTs in this study and literature experimental studies (IDTs in RCMs and STs, species profiles in jet-stirred reactors, and laminar burning velocities). Unlike literature models, the proposed model was observed to provide an overall better prediction for experimental results over a wide range of conditions. Chemical kinetic analysis of the developed model was further conducted to identify the reaction pathways controlling the autoignition of cyclohexane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Estimation of China Fusion Engineering Test Reactor performance and burning fraction in different pellet fueling scenarios by a multi-species radial transport model

Tritium self-sufficiency in future deuterium–tritium fusion reactors is a crucial challenge. As an engineering test reactor, the China Fusion Engineering Test Reactor requires a burning fraction of 3% for the goal to test the accessibility to the future fusion plant. To self-consistently simulate burning plasmas with profile changes in pellet injection scenarios and to estimate the corresponding burning fraction, a one-dimensional multi-species radial transport model is developed in the BOUT++ framework. Here several pellet-fueling scenarios are then tested in the model. The results show that the increased fueling depth improves the burning fraction by particle confinement improvement and fusion power increase. Nevertheless, by increasing the depth, the pellet cooling-down may significantly lower the temperature in the core region. Taking the density perturbation into consideration, the reasonable parameters of the fueling scenario in these simulations are estimated as pellet radius ${r}_{{\rm{p}}}=3\,{\rm{mm}},$ injection rate $=\,4\,\mathrm{Hz},$ and pellet injection velocity $=\,1000\mbox{-}2000\,{\rm{m}}\,{{\rm{s}}}^{-1}$ without drift or $450\,{\rm{m}}\,{{\rm{s}}}^{-1}$ with high-field-side drift.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Droplet burning of n-butyl acetate/n-heptane mixtures in the standard atmosphere: experiments and numerical modeling

Blending petroleum fuels with oxygenates is a common approach to stem the depletion of crude oil while also mitigating the impact of their combustion on the environment. It has recently been considered that n-butyl acetate (BA, C6H12O2 , boiling point of 399K) could be a viable oxygenate additive to diesel fuel. In this application it is important to determine the influence of the fractional amount of BA on burning of the mixture. This presentation considers this problem from an experimental and computational approach using n-heptane (C7H14 , boiling point of 372K) as an essentially single component surrogate for diesel fuel. The burning configuration considered was ostensibly spherical symmetry as promoted by burning droplets under conditions where forced and natural convection effects were minimized. In this configuration the droplet and flame are concentric spheres and soot aggregates are trapped in a shell structure between the droplet and flame. Measurements were made of the droplet, flame and soot shell diameters through video imaging of the burning process. The experimental results were used to validate a detailed numerical model of the spherically symmetric droplet burning process that incorporated a consistent combustion kinetic mechanism for BA/heptane mixtures, comprised of 402 species and 16,872 reactions inclusive of soot chemistry. A model for soot formation was also included in the simulation to predict formation of the soot shell. The simulations agreed well with measured droplet and flame diameters. It was found both experimentally and computationally that adding BA to heptane had a minimal effect on the mixture burning rate, while the flame was positioned closer to the droplet surface and the simulated soot volume fraction decreased. The implications of these results are discussed for using BA as a potential additive to diesel fuel.

09 BIOMASS FUELS↗
DOE OSTI2020

Vertical profiles of light absorption and scattering associated with black carbon particle fractions in the springtime Arctic above 79° N

Despite the potential importance of black carbon (BC) for radiative forcing of the Arctic atmosphere, vertically resolved measurements of the particle light scattering coefficient (σ sp ) and light absorption coefficient (σ ap ) in the springtime Arctic atmosphere are infrequent, especially measurements at latitudes at or above 80° N. Here, relationships among vertically distributed aerosol optical properties (σap, σsp and single scattering albedo or SSA), particle microphysics and particle chemistry are examined for a region of the Canadian archipelago between 79.9 and 83.4° N from near the surface to 50 hPa. Airborne data collected during April 2015 are combined with ground-based observations from the observatory at Alert, Nunavut and simulations from the Goddard Earth Observing System (GEOS) model, GEOS-Chem, coupled with the TwO-Moment Aerosol Sectional (TOMAS) model (collectively GEOS-Chem–TOMAS; Kodros et al., 2018) to further our knowledge of the effects of BC on light absorption in the Arctic troposphere. The results are constrained for σsp less than 15 Mm -1 , which represent 98% of the observed σsp, because the single scattering albedo (SSA) has a tendency to be lower at lower σsp, resulting in a larger relative contribution to Arctic warming. At 18.4 m 2 g -1 , the average BC mass absorption coefficient (MAC) from the combined airborne and Alert observations is substantially higher than the two averaged modelled MAC values (13.6 and 9.1 m2 g -1 ) for two different internal mixing assumptions, the latter of which is based on previous observations. The higher observed MAC value may be explained by an underestimation of BC, the presence of small amounts of dust and/or possible differences in BC microphysics and morphologies between the observations and model. In comparing the observations and simulations, we present σap and SSA, as measured, and σ ap 2 and the corresponding SSA to encompass the lower modelled MAC that is more consistent with accepted MAC values. Median values of the measured σap, rBC and the organic component of particles all increase by a factor of 1.8±0.1, going from near-surface to 750 hPa, and values higher than the surface persist to 600 hPa. Modelled BC, organics and σap agree with the near-surface measurements but do not reproduce the higher values observed between 900 and 600 hPa. The differences between modelled and observed optical properties follow the same trend as the differences between the modelled and observed concentrations of the carbonaceous components (black and organic). Model-observation discrepancies may be mostly due to the modelled ejection of biomass burning particles only into the boundary layer at the sources. For the assumption of the observed MAC value, the SSA range between 0.88 and 0.94, which is significantly lower than other recent estimates for the Arctic, in part reflecting the constraint of σsp<15 Mm -1 . The large uncertainties in measuring optical properties and BC, and the large differences between measured and modelled values here and in the literature, argue for improved measurements of BC and light absorption by BC and more vertical profiles of aerosol chemistry, microphysics and other optical properties in the Arctic.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Isolating the effect of biomass burning aerosol emissions on 20th century hydroclimate in South America and Southeast Asia

Abstract Biomass burning is a significant source of aerosol emissions in some regions and has a considerable impact on regional climate. Earth system model simulations indicate that increased biomass burning aerosol emissions contributed to statistically significant decreases in tropical precipitation over the 20th century. In this study, we use the Community Earth System Model version 1 Large Ensemble (CESM1-LENS) experiment to evaluate the mechanisms by which biomass burning aerosol contributed to decreased tropical precipitation, with a focus on South America and Southeast Asia. We analyze the all-but-one forcing simulations in which biomass burning aerosol emissions are held constant while other forcings (e.g., greenhouse gas concentrations) vary throughout the 20th century. This allows us to isolate the influence of biomass burning aerosol on processes that contribute to decreasing precipitation, including cloud microphysics, the radiative effects of absorbing aerosol particles, and alterations in regional circulation. We also show that the 20th century reduction in precipitation identified in the CESM1-LENS historical and biomass burning experiments is consistent across Coupled Model Intercomparison Project Phase 5 models with interactive aerosol schemes and the CESM2 single-forcing experiment. Our results demonstrate that higher concentrations of biomass burning aerosol increases the quantity of cloud condensation nuclei and cloud droplets, limiting cloud droplet size and precipitation formation. Additionally, absorbing aerosols (e.g., black carbon) contribute to a warmer cloud layer, which promotes cloud evaporation, increases atmospheric stability, and alters regional circulation patterns. Corresponding convectively coupled circulation responses, particularly over the tropical Andes, contribute to further reducing the flow of moisture and moisture convergence over tropical land. These results elucidate the processes that affect the water cycle in regions prone to biomass burning and inform our understanding of how future changes in aerosol emissions may impact tropical precipitation over the 21st century.

Environmental Sciences & Ecology↗
DOE OSTI2021

Improved Bounds for Burning Fence Graphs

Graph burning studies how fast a contagion, modeled as a set of fires, spreads in a graph. The burning process takes place in synchronous, discrete rounds. In each round, a fire breaks out at a vertex, and the fire spreads to all vertices that are adjacent to a burning vertex. Additionally, the burning number of a graph G is the minimum number of rounds necessary for each vertex of G to burn. We consider the burning number of the \(m \times n\) Cartesian grid graphs, written \(G_{m,n}\) . For \(m = \omega (\sqrt{n})\) , the asymptotic value of the burning number of \(G_{m,n}\) was determined, but only the growth rate of the burning number was investigated in the case \(m = O(\sqrt{n})\) , which we refer to as fence graphs. We provide new explicit bounds on the burning number of fence graphs \(G_{c\sqrt{n},n}\) , where \(c > 0\) .

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Kepler and TESS Observations of PG 1159-035

Abstract PG 1159-035 is the prototype of the PG 1159 hot (pre-)white dwarf pulsators. This important object was observed during the Kepler satellite K2 mission for 69 days in 59 s cadence mode and by the TESS satellite for 25 days in 20 s cadence mode. We present a detailed asteroseismic analysis of those data. We identify a total of 107 frequencies representing 32 ℓ = 1 modes, 27 frequencies representing 12 ℓ = 2 modes, and eight combination frequencies. The combination frequencies and the modes with very high k values represent new detections. The multiplet structure reveals an average splitting of 4.0 ± 0.4 μ Hz for ℓ = 1 and 6.8 ± 0.2 μ Hz for ℓ = 2, indicating a rotation period of 1.4 ± 0.1 days in the region of period formation. In the Fourier transform of the light curve, we find a significant peak at 8.904 ± 0.003 μ Hz suggesting a surface rotation period of 1.299 ± 0.002 days. We also present evidence that the observed periods change on timescales shorter than those predicted by current evolutionary models. Our asteroseismic analysis finds an average period spacing for ℓ = 1 of 21.28 ± 0.02 s. The ℓ = 2 modes have a mean spacing of 12.97 ± 0.4 s. We performed a detailed asteroseismic fit by comparing the observed periods with those of evolutionary models. The best-fit model has T eff = 129, 600 ± 11 100 K, M * = 0.565 ± 0.024 M ⊙ , and log g = 7.41 − 0.54 + 0.38 , within the uncertainties of the spectroscopic determinations. We argue for future improvements in the current models, e.g., on the overshooting in the He-burning stage, as the best-fit model does not predict excitation for all of the pulsations detected in PG 1159-035.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Wildfires Risk Evaluation of the System (WiRES) Framework Tool

The invention is a set of algorithms and calculations for a performance-based model to translate wildfire burn potential to actual transmission line outages in real-time in an interactive application that uses geospatial data sets on the wildfire burn potential as well as detailed grid topographical datasets.

Chalishazar, Vishvas↗
DOE OSTI2021

Three-dimensional Hydrodynamic Simulations of Convective Nuclear Burning in Massive Stars Near Iron Core Collapse

Nonspherical structure in massive stars at the point of iron core collapse can have a qualitative impact on the properties of the ensuing core-collapse supernova explosions and the multimessenger signals they produce. Strong perturbations can aid successful explosions by strengthening turbulence in the postshock region. Here we report on a set of 4π 3D hydrodynamic simulations of O- and Si-shell burning in massive star models of varied initial masses using MESA and the FLASH simulation framework. We evolve four separate 3D models for roughly the final 10 minutes prior to and including iron core collapse. We consider initial 1D MESA models with masses of 14, 20, and 25 M ⊙ to survey a range of O/Si-shell density and compositional configurations. Further, we characterize the convective shells in our 3D models and compare them to the corresponding 1D models. In general, we find that the angle-average convective speeds in our 3D simulations near collapse are three to four times larger than the convective speeds predicted by MESA at the same epoch for our chosen mixing length parameter of α MLT = 1.5. In three of our simulations, we observe significant power in the spherical harmonic decomposition of the radial velocity field at harmonic indices of ℓ = 1–3 near collapse. Our results suggest that large-scale modes are common in massive stars near collapse and should be considered a key aspect of presupernova progenitor models.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Increased Variability of Biomass Burning Emissions in CMIP6 Amplifies Hydrologic Cycle in the CESM2 Large Ensemble

Abstract Historical simulations performed for the Coupled Model Intercomparison Project Phase 6 used biomass burning emissions between 1997 and 2014 containing higher spatial and temporal variability compared to emission inventories specified for earlier years, and compared to emissions used in previous (e.g., CMIP5) simulation intercomparisons. Using the Community Earth System Model version 2 Large Ensemble, we show this increased biomass burning emissions variability leads to amplification of the hydrologic cycle poleward of 40°N. Notably, the high variability of biomass burning emissions leads to increased latent heat fluxes, column‐integrated precipitable water, and precipitation. Greater ocean heat uptake, weaker meridional energy transport from the tropics, greater atmospheric shortwave and longwave absorption, and lower relative humidity act to moderate this hydrologic cycle amplification. Our results suggest it is not only the secular changes (on multidecadal timescales) in biomass burning emissions that impact the hydrologic cycle, but also the shorter timescale variability in emissions.

Heyblom, Kyle B.↗
DOE OSTI2026

TES: Modelling Microbes to Predict Post-Fire Carbon Cycling in the Boreal Forest across Burn Severities (Exploratory Proposal)

Wildfires in boreal ecosystems represent a globally significant ecological process that is expected to be sensitive to changing climate as well as forest management strategies, but is currently insufficiently understood and represented in models. We sought to determine whether linking belowground microbial community composition, size, and activity to aboveground properties of burn severity and plant community composition (upland jack pine and upland spruce) would allow us to better model post-fire soil CO 2 fluxes using the Carbon, Organisms, Rhizosphere and Protection in the Soil Environment (CORPSE) model. We used an integrated modelling experimental approach, with mechanistic laboratory experiments designed to inform models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Evaporation Induced Entrainment of Contaminants from Evaporating and Burning Liquids.

This interim report details model development, theory, and a literature review focusing on the evaporation induced entrainment (sub-boiling) of contaminated liquids. Entrainment from a variety of sources is the topic of DOE Handbook 3010, and this report deals more broadly with fire related airborne sources of contaminants in hazardous operations. Relatively few studies have examined sub-boiling behavior in the past, however, it can be a phenomenon that presents a fire related risk under hazardous operations. Molecular dynamics simulations are used to infer the gaseous evolution of coordinated complexes, and a model for a water/plutonium/nitrate system is deduced from the simulation results by evaluating the statistical trends of the results. Questions remain as to the chemical reactivity and longevity of entrained species. A generalized computer model capability and simple analytical model assumptions are developed for predicting the results of these and other (boiling and solid entrainment) scenarios. Verification related predictions using these models are illustrated.

36 MATERIALS SCIENCE↗