Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “battery research”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Electrical Safety Practices Developed for Automotive Lithium Ion Battery Dismantlement

ORNL is developing electrical safety practices for handling and disassembling automotive lithium ion batteries in a research environment. Online literature searches did not reveal any standard electrical safety practices for disassembling lithium ion battery stacks from automobiles. Until recently, there has been insufficient motivation to recycle or refurbish spent automotive lithium ion batteries due to limited volumes entering the secondary market. However, a growing volume of spent lithium ion batteries are beginning to collect in automobile salvage yards, recycling facilities, landfills, and other places due to a shortage of economically and environmentally viable end-of-life options. ORNL studied automotive battery pack, module, and cell dismantlement to understand the risks, hazards, and controls necessary to perform dismantlement safely and economically. Packs, modules, and cells were manually taken apart, while wearing appropriate personal protective equipment, with insulated hand tools. These dismantlement studies point out the hazards and risks associated with dismantling automotive lithium ion batteries and describe practices for controlling such hazards and risks while demonstrating the controls through a case study of a first-generation Chevrolet Volt battery pack.

25 ENERGY STORAGE↗
DOE OSTI2023

Real time lithium metal calendar aging in common battery electrolytes

Li metal anodes are highly sought after for high energy density applications in both primary commercial batteries and next-generation rechargeable batteries. In this research, Li metal electrodes are aged in coin cells for a year with electrolytes relevant to both types of batteries. The aging response is monitored via electrochemical impedance spectroscopy, and Li electrodes are characterized post-mortem. It was found that the carbonate-based electrolytes exhibit the most severe aging effects, despite the use of LiBF 4 -based carbonate electrolytes in Li/CF x Li primary batteries. Highly concentrated LiFSI electrolytes exhibit the most minimal aging effects, with only a small impedance increase with time. This is likely due to the concentrated nature of the electrolyte causing fewer solvent molecules available to react with the electrode surface. LiI-based electrolytes also show improved aging behavior both on their own and as an additive, with a similar impedance response with time as the concentrated LiFSI electrolytes. Since I − is in its most reduced state, it likely prevents further reaction and may help protect the Li electrode surface with a primarily organic solid electrolyte interphase.

25 ENERGY STORAGE↗
DOE OSTI2023

Carbon Scaffold Architectures for Stable Lithium Metal Anodes

In light of the skyrocketing demand for electric vehicles and consequent need for high-performing lithium-ion batteries, there has been significant research into the creation of a battery with a lithium metal anode due to its high theoretical capacity and energy density. Unfortunately, nonuniform lithium deposition and consequent dendrite growth diminish performance and pose a safety risk. To combat this, lightweight carbon scaffolds are being developed to stabilize the electric field of these batteries and induce uniform deposition through rational design at the nano-, micro-, and meso- scales. However, there is a paucity of research on the impacts of macroscale scaffold topology on lithium cycling performance. Here, we report the creation of two graphite-based scaffolds with distinct 3D topologies: one a series of triangular prisms and one a series of rectangular prisms. Coin cells were made using these scaffolds and cycled at a current of 1mA/cm2 for 50 cycles to test the performance. The triangular topology was found to outperform the rectangular topology in terms of both potential magnitude and stability during cycling. Disassembling the cells revealed more even lithium deposition on the rectangular scaffold; however, some of the rectangular prisms were broken while all the triangular prisms remained intact. Last, future experiments are proposed regarding the scaffold spacing and mass of the cells in order to isolate the topological impact.

25 ENERGY STORAGE↗
DOE OSTI2020

Residential Battery Modeling for Control-Oriented Techno-Economic Studies: Preprint

Electrochemical batteries, which serve as electric energy storage devices, are becoming increasingly popular among residential buildings that incorporate solar photovoltaic (PV) systems to help meet their energy needs. Battery economics are affected by performance degradation over time, and managing this degradation can help extend the battery's lifespan. The tradeoff between operational costs/benefits and managing battery degradation is of significant research interest. One of the key factors for assessing battery degradation is the dispatch strategy used to control the charging and discharging of the battery. Conventional dispatch strategies typically use simple rule-based methods, and these overly aggressive charging/discharging cycles can significantly reduce a battery’s life span. Our research seeks to develop optimized dispatch strategies for grid-connected PV homes with a goal of extending battery life while simultaneously taking into consideration utility costs and occupant comfort. To achieve this goal, we adapted lithium-ion battery life- and cyclic-degradation models for use in high-fidelity building simulations, so whole-building and grid-interactive controllers can dispatch the batteries along with other flexible loads. With the help of a co-simulation platform, we performed a simulation study to compute the optimized dispatch strategies for relevant operating conditions brought about by changing geographical locations, weather conditions, and utility pricing. Comparing the optimized strategies with the conventional strategies resulted in a >50% decrease in capacity degradation and >10% average reduction in operational costs during the months of January and July in Fort Collins, Colorado; Phoenix, Arizona; and Portland, Oregon.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2026

Are Capacity and Energy Loss Equivalent Metrics for Battery Aging Reporting?

Battery aging in research publications and manufacturer specification sheets for individual cells is commonly reported as capacity (Ah) versus cycle number. However, the key measured quantity in battery-powered devices is energy (Wh), which is derived from integrating capacity with voltage. In this work, we compare the rate of capacity and energy loss across a wide range of Li-ion single-cell cycling studies with different positive electrode chemistries, charge–discharge rates, and temperatures. We find that the relative rate of discharge energy loss varies with cycling conditions. For many cells cycled under moderate conditions, the rate of discharge energy fade is only slightly faster than the rate of discharge capacity fade. However, some cells demonstrated up to a 15% decline in cycle count when 80% energy retention rather than 80% capacity retention was used as the end-of-life metric. These results highlight the importance of reporting cell aging based on energy fade to avoid overestimating battery lifetime in full systems.

batteries↗
DOE OSTI2024

Research Progress and Perspectives on Pre‐Sodiation Strategies for Sodium‐Ion Batteries

Sodium‐ion batteries (SIBs) with abundant elements have garnered significant attention from researches as a promise compensation to lithium‐ion batteries (LIBs). However, the large‐scale commercial application of SIBs is partially hindered by the limited initial coulombic efficiency (ICE) due to the irreversible formation of solid electrolyte interphase (SEI) and intercalation into the defects in the anode. Similar to pre‐lithiation techniques, pre‐sodiation approaches are considered to be one of the most direct and effective way to compensate for the loss of active sodium at the anode side of SIBs during the initial cycle. In this context, additional sodium ions are pre‐injected to the cathode/anode material by chemical/electrochemical methods, aiming to improve battery span life and energy density. Here, this review delves into the necessity and impact of pre‐sodiation techniques, compiling the latest research progress, for instance, self‐sacrificing cathode additives, over‐sodiated cathode materials, direct contact and solution chemical pre‐sodiation. Notably, the research mechanisms underlying solution chemical pre‐sodiation are highlighted. This comprehensive overview aims to foster a deeper understanding of the pre‐sodiation techniques and expects to provide guidance for realizing the commercial application of high energy density sodium‐ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Hydroxyl Conducting Hydrogels Enable Low-Maintenance Commercially Sized Rechargeable Zn–MnO2 Batteries for Use in Solar Microgrids

Zinc (Zn)–manganese dioxide (MnO2) rechargeable batteries have attracted research interest because of high specific theoretical capacity as well as being environmentally friendly, intrinsically safe and low-cost. Liquid electrolytes, such as potassium hydroxide, are historically used in these batteries; however, many failure mechanisms of the Zn–MnO2 battery chemistry result from the use of liquid electrolytes, including the formation of electrochemically inert phases such as hetaerolite (ZnMn2O4) and the promotion of shape change of the Zn electrode. This manuscript reports on the fundamental and commercial results of gel electrolytes for use in rechargeable Zn–MnO2 batteries as an alternative to liquid electrolytes. The manuscript also reports on novel properties of the gelled electrolyte such as limiting the overdischarge of Zn anodes, which is a problem in liquid electrolyte, and finally its use in solar microgrid applications, which is a first in academic literature. Potentiostatic and galvanostatic tests with the optimized gel electrolyte showed higher capacity retention compared to the tests with the liquid electrolyte, suggesting that gel electrolyte helps reduce Mn3+ dissolution and zincate ion migration from the Zn anode, improving reversibility. Cycling tests for commercially sized prismatic cells showed the gel electrolyte had exceptional cycle life, showing 100% capacity retention for >700 cycles at 9.5 Ah and for >300 cycles at 19 Ah, while the 19 Ah prismatic cell with a liquid electrolyte showed discharge capacity degradation at 100th cycle. We also performed overdischarge protection tests, in which a commercialized prismatic cell with the gel electrolyte was discharged to 0 V and achieved stable discharge capacities, while the liquid electrolyte cell showed discharge capacity fade in the first few cycles. Finally, the gel electrolyte batteries were tested under IEC solar off-grid protocol. It was noted that the gelled Zn–MnO2 batteries outperformed the Pb–acid batteries. Additionally, a designed system nameplated at 2 kWh with a 12 V system with 72 prismatic cells was tested with the same protocol, and it has entered its third year of cycling. This suggests that Zn–MnO2 rechargeable batteries with the gel electrolyte will be an ideal candidate for solar microgrid systems and grid storage in general.

25 ENERGY STORAGE↗
DOE OSTI2025

An infrared, Raman, and X-ray database of battery interphase components

Further improvements to lithium-ion and emerging battery technologies can be enabled by an improved understanding of the chemistry and working mechanisms of interphases that form at electrochemically active battery interfaces. However, it is difficult to collect and interpret spectra of interphases for several reasons, including the presence of a variety of compounds. To address this challenge, we herein present a vibrational spectroscopy and X-ray diffraction data library of ten compounds that have been identified as interphase constituents in lithium-ion or emerging battery chemistries. The data library includes attenuated total reflectance Fourier transform infrared spectroscopy, Raman spectroscopy, and X-ray diffraction data, collected in inert atmospheres provided by custom sample chambers. The data library presented in this work (and online repository) simplifies access to reference data that is otherwise either diffusely spread throughout the literature or non-existent, and provides energy storage researchers streamlined access to vital interphase-relevant data that can accelerate battery research efforts.

25 ENERGY STORAGE↗
DOE OSTI2021

The mystery and promise of multivalent metal-ion batteries

Despite mounting interest and extensive research efforts in developing multivalent (MV) metal-ion battery chemistries (Zn 2+ , Mg 2+ , Ca 2+ , Al 3+ , etc.), the commercial prospects for these energy storage systems are still obfuscated by fundamental scientific questions and engineering challenges. In particular, the charge storage mechanism(s) of the positive electrode and the implications on achievable electrode and full cell-level performance remain intensely debated topics in the field. Here, in this minireview, we highlight some of the recent progress and uncertainty in elucidating capacity contributions and accompanying mechanisms for different charge carriers (H + , MV-ion, structural ion, anion, and charged solvates/complexes). We then present cell balancing and increasing metal anode utilization as major remaining challenges and propose design strategies and future directions for realizing practical MV metal-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Chemically Generated Liquid Sulfur Droplets at Room and Subzero Temperatures

The liquid phase of sulfur has been observed at room temperature, resulting from the electrochemical oxidation of polysulfides, a process occurring on the electrodes and influenced by the electrode materials. However, such electrode-dependent behavior of liquid sulfur has constrained its use in battery applications, driving research for alternative processes. This paper introduces an approach to generating liquid sulfur at both room and subzero temperatures through chemical reactions independent of the substrate material. We demonstrate that using a redox mediator, polysulfides can be chemically oxidized into liquid sulfur droplets in the electrolyte close to but away from the electrode. This pathway can generate liquid sulfur at room and subzero temperatures of −15 °C, 130 °C below sulfur’s melting temperature (115 °C). The chemically generated liquid sulfur further enriches the lithium–sulfur-electrolyte material systems, potentially creating opportunities for high-energy lithium–sulfur and other metal–sulfur batteries.

liquid sulfur↗
DOE OSTI2021

Depowering of Batteries to Reduce Cost of Ownership

(1) Executive Summary: End of life batteries (EOLBs) present a cost and safety liability for their owners and stakeholders. This is due flammability, energy, and power with EOLBs. Current approaches include cumbersome, expensive packaging, specialized shipping, regulated storage, and they are responsible for over half of the cost of recycling. They all expensively and inadequately address symptoms. OnTo has developed and proven a simple way to resolve the problem systemically, through depowering of lithium-ion batteries (and most any battery other than lead). The low-cost process removes flammability, power, and energy in EOLBs through non-toxic chemical processing. The opportunity for commerce of inert scrap is at least $5 billion greater than the commerce in hazardous scrap, all made possible through OnTo’s technology for efficiency and safety. (2) Depowering Improves Safety and Decreases Cost of Battery Ownership: OnTo’s depowering technology will remove half of the cost of EOLB management and recycling. Without this technology, EOLB recycling will always be a liability. EOLB is hazardous due to inherent flammability of electrolyte and lithium. The shipping and commerce of EOLBs is costly and dangerous all along the chain of custody from owner, dealership/shop, shipper, second-life sorter, (shipper again), and finally to the destination facility recycler. OnTo’s depowering service renders inert most any EOLB packs, modules, and cells. The technology uses a brief, non-toxic treatment applicable to most any chemistry. The industry needs a safe, simple, modular, and inexpensive method to render EOLBs as inert scrap. OnTo’s deactivation system is scalable to the needs of any customer along the EOLB chain of custody. (3) Evidence of Successful Depowering: Untreated batteries will catch fire and explode under abuse conditions such as heat or crush. Slide 2 below shows that untreated batteries will blow-up and expel their internal components with heating, after OnTo’s depowering treatment, the same battery is inert with the same heat treatment (Fig. 7 in the slide). Depowering also removes electrolyte reactivity, eliminating the production of HF and other toxins (Fig 6. in the slide) The depowering process is applicable to large, 26 Ah cells. Fig. 5 in the slide shows the removal of all the electrolyte from whole cells. Removal of flammable material from an EOLB contributes to the inert behavior. OnTo developed this technology through a project supported by the US Department of Energy EERE program, with partners including Seattle King County Metro Transit. While OnTo has generated evidence of successful depowering of batteries, in 2020, a follow-on voucher opportunity for third party analysis of depowered cells and materials was approved through CalTestBed. The expertise of the battery and materials research groups at Lawrence Berkeley National Laboratory will characterize these depowered cells to provide better understanding of the materials level changes in depowering. (4) Pilot Plant for Depowering EOLBs: Making the spoke work in hub-and-spoke While other companies are marketing the hub-and-spoke approach for recycling EOLBs, they rely on dangerous, expensive shredding methods with flimsy IP protection. OnTo offers the only patented, proven ability to depower EOLBs from most any chemistry – at half of the capital cost required for shredding, while eliminating the liability, danger, and waste streams inherent with shredding. The proposed commercial pilot facility is (5) OnTo Technology LLC Company: OnTo develops advanced battery recycling innovations that produce manufacturing quality electrode materials from recycled batteries. Their patented Cathode-healing™ and Deactivation/Depowering processes improve safety and reduce the cost of recycling. OnTo’s breakthrough technologies produce advanced materials for manufacturing batteries useful in applications from portable power to electric vehicles. Contact: Steve Sloop OnTo Technology LLC, 63221 Service Road, STE F, Bend, OR 97703, ssloop@onto-technology.com , 541-389-7897

deactivation↗
DOE OSTI2022

Low-Tortuosity Thick Electrodes with Active Materials Gradient Design for Enhanced Energy Storage

The ever-growing energy demand of modern society calls for the development of high-loading and high-energy-density batteries, and substantial research efforts are required to optimize electrode microstructures for improved energy storage. Low-tortuosity architecture proves effective in promoting charge transport kinetics in thick electrodes; however, heterogeneous electrochemical mass transport along the depth direction is inevitable, especially at high C-rates. In this work, we create an active material gradient in low-tortuosity electrodes along ion-transport direction to compensate for uneven reaction kinetics and the nonuniform lithiation/delithiation process in thick electrodes. The gradual decrease of active material concentration from the separator to the current collector reduces the integrated ion diffusion distance and accelerates the electrochemical reaction kinetics, leading to improved rate capabilities. Further, the structure advantages combining low-tortuosity pores and active material gradient offer high mass loading (60 mg cm –2 ) and enhanced performance. Comprehensive understanding of the effect of active material gradient architecture on electrode kinetics has been elucidated by electrochemical characterization and simulations, which can be useful for development of batteries with high-energy/power densities.

25 ENERGY STORAGE↗
DOE OSTI2021

Vehicle Technologies and Hydrogen and Fuel Cell Technologies Research and Development Programs Benefits Assessment Report for 2020

The U.S. Department of Energy’s Vehicle Technologies and Hydrogen and Fuel Cell Technologies Offices (VTO and HFTO) support research and development of efficient and sustainable transportation technologies that will improve energy efficiency, minimize emissions, and enable America to use less petroleum. VTO and HFTO regularly revisit and update relevant research and development goals and areas of emphasis in response to the latest technological advancements and in alignment with current national priorities. As such, analyses of expected benefits resulting from VTO and HFTO investments and anticipated goal achievements are updated periodically and will be again for 2021 in the context of the latest national-level transportation decarbonization goals. The analysis in the present report is based on technical progress goals established in VTO and HFTO in the years immediately prior to and including 2020, and it summarizes the estimated energy and emissions benefits corresponding to achievement of those goals. The goals span research activities on batteries, electric drive technologies (EDT), combustion, lightweight materials, fuel cells, and hydrogen storage. The evaluation includes detailed analyses into the benefits of technology improvements on the U.S. light-duty (LD) vehicle fleet and separately on the U.S. medium- and heavy-duty (MDHD) vehicle fleet. This report summarizes the outcomes from each of these analyses both independently and in combination.

08 HYDROGEN↗
DOE OSTI2022

Modification of lithium electrodeposition behavior by variation of electrode distance

Developing a better understanding and control over the lithium electrodeposition behavior will assist with the commercial application of lithium metal anodes for rechargeable batteries. Despite intensive research over the past decade, our understanding of the deposition of lithium is limited. Here a new observation on the effect of distance between the working electrode and the counter electrode for electrochemical lithium deposition behavior is reported. From this fundamental investigation of distance, the high lithium ion concentration regions formed by release of lithium ions from the counter electrode modify the lithium deposition behavior on the working electrode, resulting in the generation of non-uniform lithium dendrites with a thick diversely composed surface film. Alternatively, increasing the distance between the electrodes results in the deposition of a spherical lithium morphology with a thin LiF rich surface film. Here, this fundamental study provides a deeper understanding of correlation between lithium deposition behavior and electrode separation and provides insight to inhibit lithium dendrite formation.

25 ENERGY STORAGE↗
DOE OSTI2022

Non‐Flammable Ester Electrolyte with Boosted Stability Against Li for High‐Performance Li Metal Batteries

Abstract In traditional non‐flammable electrolytes a trade‐off always exists between non‐flammability and battery performance. Previous research focused on reducing free solvents and forming anion‐derived solid‐electrolyte interphase. However, the contribution of solvated anions in boosting the stability of electrolyte has been overlooked. Here, we resolve this via introducing anions into Li + solvation sheaths using anions with similar Gutmann donor number (DN) to that of solvents. Taking trimethyl phosphate fire‐retardant (DN=23.0 kcal mol −1 ) and NO 3 − (DN=22.2 kcal mol −1 ) as an example, NO 3 − is readily involved in the Li + solvation sheath and reduces the polarity of solvent. This results in boosted stability of electrolyte against Li. The developed non‐flammable electrolyte has low viscosity, high ionic conductivity and is low cost. The reversibility of Li‐Cu cell was improved to 99.49 % and the lifespan of practical LMBs was extended by >100 %.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

How do super concentrated electrolytes push the Li-ion batteries and supercapacitors beyond their thermodynamic and electrochemical limits?

Increasing the energy density of energy storage devices is currently the key target of many battery and supercapacitor research activities. For both types of devices, the electrochemical stability window (ESW) determines the effective energy density of the device. ESWs are defined by the effective oxidation and reduction potentials of the electrolyte, which are controlled by many various factors, including the HOMO/LUMO (highest/lowest unoccupied molecular orbital) energies of the electrolyte molecules, the nature of the electrode/electrolyte interphases, and other physicochemical properties. The concentration of the electrolyte would affect the HOMO/ LUMO levels thus also change the ESW. A higher concentration of salt induces specific arrangements among the anion, cation, and solvent molecules of an electrolyte, altering the bulk behavior of the electrolyte, resulting in drastic change in the electrode interfaces. These uniquely modified physicochemical properties extend the ESW in several different ways, including the enhancement in the kinetic stability of the electrodes, as well as the thermodynamic and Nernst shifts of the oxidation/reduction potentials of the electrolyte. For organic electrolytes, it is the reduced amount of free solvent molecules that plays the key role in such changes; whereas for aqueous electrolytes, it is the scarcity of free water molecules and the reduced water activity that control the key properties of the electrolyte. Here, we focus on elucidating the fundamental structural changes occurring within an electrolyte system with increasing salt concentrations. The underlying mechanisms which not only facilitates the extension of the ESW, but also enables higher rate capabilities and mitigates aluminum dissolution for batteries with organic electrolytes, are meticulously explained. Further, we thoroughly discuss the importance of high-voltage stability in aqueous battery systems by exploiting the changed properties observed with higher concentrations of salts. To finish, high-voltage supercapacitors enabled by superconcentrated electrolytes are also explored.

25 ENERGY STORAGE↗
DOE OSTI2021

Battery Performance, Thermal, and Life Modeling for Southern California Edison (Cooperative Research and Development Final Report)

The objective of this project is to develop battery performance models, thermal models and life models for SCE to use in simulation and analysis of grid services involving energy storage. NREL will fit the models to three separate chemistries using test data provided by SCE. The dataset for each chemistry will include electrical, thermal and aging response to different temperatures and cycling conditions, measured under a variety of cell-level and module-level experiments described in SCE test protocol documents. Once tuned to a test dataset, the battery system model software will provide predictions of battery energy and power loss, and thus cycle and calendar life, for any energy storage grid service power profile of interest to SCE. The automated battery life modeling and simulation tool can also be applied to any other grid battery systems as long as necessary input data is available to accelerate battery model development and battery lifetime analysis.

25 ENERGY STORAGE↗
DOE OSTI2022

Batteries Included: Top 10 Findings from Berkeley Lab Research on the Growth of Hybrid Power Plants in the United States

One of the most important electric power system trends of the 2010s was the rapid deployment of wind turbines and photovoltaic arrays, but a twist for the 2020s may be the rapid deployment of ‘hybrid’ generation resources. Hybrid power plants typically combine solar or wind (or other energy sources) with co-located storage. While hybridization helps to ease the challenge of balancing variable supply and demand, its relative novelty means that research is needed to facilitate integration and promote innovation. Combining the characteristics of multiple energy, storage, and conversion technologies poses complex questions for grid operations and economics. Project developers, system operators, planners, and regulators would benefit from better data, methods, and tools to estimate the costs, values, and system impacts of hybrid projects. This publication showcases some of Berkeley Lab’s robust research program intended to support private- and public-sector decision-making about hybrid plants in the United States. Our short briefing summarizes articles that we published between 2020 and 2022, links to the in-depth reports, and provides contact details for further engagement on the specific research topics: Growth: Developer interest in hybrid power plants is strong and growing Price vs. Value: PV+storage hybrids have low PPA prices and high value in some regions Market Drivers: Solar hybridization is driven by tax credits and other benefits Configuration Choices: Market prices have incentivized shorter duration batteries with PV Capacity Value: The capacity contribution of a hybrid is less than the sum of its parts Ancillary Services: AS markets are a valuable yet fleeting option for hybrids Market Participation: Hybrids can more flexibly engage with electricity markets Operations: The power system value of hybrids depends on how they are operated Distributed Hybrids: Growth of customer-sited PV+storage hybrids offers new opportunities Future Research: Where next? Priority areas for hybrid power research.

25 ENERGY STORAGE↗