Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “atomically thin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Effects of Field Strength and Silver Nanowire Size on Plasmon-Enhanced N 2 Dissociation

Dissociation of the nitrogen molecule via plasmon-enhanced catalysis using noble metal nanoparticles has been investigated both experimentally and computationally in recent years. However, the mechanism of plasmon-enhanced nitrogen dissociation is still not very clear. In this work, we apply theoretical approaches to examine the dissociation of a nitrogen molecule on atomically-thin Ag n nanowires (n = 6, 8, 10, 12) and a Ag 19 + nanorod. Ehrenfest dynamics provides information about the motion of nuclei during the dynamics process and real-time TDDFT calculations show the electronic transitions and population of electrons over the first 10s of fs time scale. The activation and dissociation of nitrogen is typically enhanced when the electric field strength increases. However, the enhancement is not always monotonic with field strength. As the length of the Ag wire increases, nitrogen is typically easier to dissociate and thus requires lower field strengths, even though the plasmon frequency is lower. The Ag 19 + nanorod leads to faster dissociation of N 2 than the atomically-thin nanowires. Altogether, our detailed study yields insights into the mechanisms involved in plasmon-enhanced N 2 dissociation, as well as provides information about factors that can be used to improve adsorbate activation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Hydration size-dependent transport of ions across nanoporous graphene membranes

Nanoporous atomically-thin membranes are promising candidates for metal ion separations due to their chemical stability and high permeance and selectivity, but experimental evidence of the mechanisms responsible for ion-ion selectivity is sparse. Here, in this work, we measured the simultaneous diffusion of a dilute mixture of ten different Group I, Group II, and rare earth cations in a salt background across nanoporous graphene (NPG) membranes with sub-nanometer pores. The membranes exhibited ion-ion selectivity, including between similarly-charged ions. Cation transport was governed primarily by the hydrated ion size that was consistent with continuum models of ion diffusion, with additional influence of the ionic charge. Selectivity enhancement was achieved by modifying ion sizes using an ion-selective complexing agent. Our study provides evidence of the importance of size-sieving and electrostatic mechanisms governing ion transport across NPG, and allows for quantitative prediction of transport rates to guide future development of ion-selective atomically-thin membranes.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Emission Control from Transition Metal Dichalcogenide Monolayers by Aggregation-Induced Molecular Rotors

Organic–inorganic (O–I) heterostructures, consisting of atomically thin inorganic semiconductors and organic molecules, present synergistic and enhanced optoelectronic properties with a high tunability. Here, we develop a class of air-stable vertical O–I heterostructures comprising a monolayer of transition-metal dichalcogenides (TMDs), including WS 2 , WSe 2 , and MoSe 2 , on top of tetraphenylethylene (TPE) core-based aggregation-induced emission (AIE) molecular rotors. The created O–I heterostructures yields a photoluminescence (PL) enhancement of up to ~950%, ~500%, and ~330% in the top monolayer WS 2 , MoSe 2 , and WSe 2 as compared to PL in their pristine monolayers, respectively. The strong PL enhancement is mainly attributed to the efficient photogenerated carrier process in the AIE luminogens (courtesy of their restricted intermolecular motions in the solid state) and the charge-transfer process in the created type I O–I heterostructures. Moreover, we observe an improvement in photovoltaic properties of the TMDs in the heterostructures including the quasi-Fermi level splitting, minority carrier lifetime, and light absorption. Overall, this work presents an inspiring example of combining stable, highly luminescent AIE-based molecules, with rich photochemistry and versatile applications, with atomically thin inorganic semiconductors for multifunctional and efficient optoelectronic devices.

14 SOLAR ENERGY↗
DOE OSTI2020

Substrate-Dependent Exciton Diffusion and Annihilation in Chemically Treated MoS 2 and WS 2

Atomically thin semiconductors such as monolayer MoS 2 and WS 2 exhibit nonlinear exciton–exciton annihilation at notably low excitation densities (below ~10 excitons/μm 2 in exfoliated MoS 2 ). In this work, we show that the density threshold at which annihilation occurs can be tuned by changing the underlying substrate. When the supporting substrate is changed from SiO 2 to Al 2 O 3 or SrTiO 3 , the rate constant for second-order exciton–exciton annihilation, k XX [cm 2 /s], is reduced by 1 or 2 orders of magnitude, respectively. Using transient photoluminescence microscopy, we measure the effective room-temperature exciton diffusion coefficient in bis(trifluoromethane)sulfonimide-treated MoS 2 to be in the range D = 0.03–0.06 cm 2 /s, corresponding to a diffusion length of L D = 350 nm for an exciton lifetime of τ = 18 ns, which does not depend strongly on the substrate. We discuss possible mechanisms for the observed behavior, including substrate permittivity, long-range exciton–exciton or exciton–charge interactions, defect-mediated Auger recombination, and spatially inhomogeneous exciton populations arising from substrate-induced disorder. Exciton annihilation limits the overall efficiency of 2D semiconductor devices operating at high exciton densities; the ability to tune these interactions via the underlying substrate is an important step toward more efficient optoelectronic technologies featuring atomically thin materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Sieving Hydrogen Isotopes via Machine Learning Assisted Chemical Vapor Deposition (CVD) of High‐Quality Monolayer Hexagonal Boron Nitride (h‐BN) on Iron Foils

Atomically thin two-dimensional (2D) ceramics, such as monolayer hexagonal boron nitride (h-BN), present potential for disruptive advances in separations. However, sub-atomic scale separation of hydrogen isotopes (H + /D + ) require near pristine 2D material membranes, and scalable synthesis of such high-quality h-BN comparable to mechanically exfoliated crystals remains a significant challenge. Here, we report a scalable Fe-catalyzed chemical vapor deposition (CVD) process for bottom-up synthesis of large-area, high-quality monolayer h-BN films, overcoming key limitations of conventional ammonia-based routes. By leveraging mechanistic insights and higher CVD temperatures, we suppress multilayer formation and achieve uniform monolayer h-BN coverage on commercially available Fe foils. Machine learning enables systematic exploration of the complex, multi-dimensional CVD parameter space (growth time, temperature, precursor temperature, multilayer faction, coverage), providing data-driven approaches to visualize and identify process regimes facilitating predominantly monolayer h-BN growth with minimal secondary nuclei/ad-layers. The optimized Fe-catalyzed CVD h-BN membranes show high-quality as observed by proton/deuteron (H + /D + ) selectivity ≈8.45, approaching the highest quality benchmark of mechanically exfoliated h-BN (H + /D + selectivity ≈10) as well as significantly outperforming Cu-catalyzed CVD h-BN membranes (H + /D + selectivity ≈3.62, control selectivity ≈1.7). Our work provides a scalable cost-effective route for high-quality monolayer h-BN synthesis for sub-atomic scale separations (H + /D + ) and demonstrates the broader potential of machine learning-guided optimization of CVD for advancing synthesis of 2D materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Assessing the quality of large-area monolayer graphene grown on liquid copper for size-selective ionic/molecular membrane separations

Monolayer graphene growth on liquid copper (Cu) has attracted attention due to advantages of a flat/smooth catalytic growth surface, high synthesis temperature (>1080 °C) as well as the possibility of forming graphene domains that are mobile on the liquid Cu with potential to minimize grain boundary defects and self-assemble into a continuous monolayer film. However, the quality of monolayer graphene grown on liquid copper and its suitability for size-selective ionic/molecular membrane separations has not been evaluated/studied. Here, we probe the quality of monolayer graphene grown on liquid Cu (via a metallurgical process, HSMG ® ) using Scanning Electron Microscope (SEM), High-resolution transmission electron microscope (HR-TEM), Raman spectroscopy and report on a facile approach to assess intrinsic sub-nanometer to nanometer-scale defects over centimeter-scale areas. We demonstrate high transfer yields of monolayer graphene (>93% coverage) from the growth substrate to polyimide track etched membrane (PITEM, pore diameter ~200 nm) supports to form centimeter-scale atomically thin membranes. Next, we use pressure-driven transport of ethanol to probe defects > 60 nm and diffusion-driven transport of analytes (KCl ~0.66 nm, L-Tryptophan ~0.7–0.9 nm, Vitamin B12 ~1–1.5 nm and Lysozyme ~3.8–4 nm) to probe nanoscale and sub-nanometer scale defects. Diffusive transport confirms the presence of intrinsic sub-nanometer to nanometer scale defects in monolayer graphene grown on liquid Cu are no less than that in high-quality graphene synthesized via chemical vapor deposition (CVD) on solid Cu. Our work not only benchmarks quality of graphene grown on liquid copper for membrane applications but also provides fundamental insights into the origin of intrinsic defects in large-area graphene synthesized via bottom-up processes for membrane applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Mitigating leaks in membranes

Two-dimensional material based filters, their method of manufacture, and their use are disclosed. In one embodiment, a membrane may include an active layer including a plurality of defects and a deposited material associated with the plurality of defects may reduce flow therethrough. Additionally, a majority of the active layer may be free from the material. In another embodiment, a membrane may include a porous substrate and an atomic layer deposited material disposed on a surface of the porous substrate. The atomic layer deposited material may be less hydrophilic than the porous substrate and an atomically thin active layer may be disposed on the atomic layer deposited material.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Mitigating leaks in membranes

Two-dimensional material based filters, their method of manufacture, and their use are disclosed. In one embodiment, a membrane may include an active layer including a plurality of defects and a deposited material associated with the plurality of defects may reduce flow therethrough. Additionally, a majority of the active layer may be free from the material. In another embodiment, a membrane may include a porous substrate and an atomic layer deposited material disposed on a surface of the porous substrate. The atomic layer deposited material may be less hydrophilic than the porous substrate and an atomically thin active layer may be disposed on the atomic layer deposited material.

Karnik, Rohit N.↗
DOE OSTI2020

Investigation of Rh–titanate (ATiO 3 ) interactions on high-surface-area perovskite thin films prepared by atomic layer deposition

Thin, ~1 nm films of CaTiO 3 , SrTiO 3 , and BaTiO 3 were deposited onto MgAl 2 O 4 by Atomic Layer Deposition (ALD) and studied as catalyst supports for Rh. Scanning Transmission Electron Microcopy (STEM) and X-Ray Diffraction (XRD) demonstrated that the films had the perovskite structure and formed uniform coatings stable up to 1073 K. Rh, added by ALD, interacted strongly with CaTiO 3 and somewhat less strongly with SrTiO 3 , while Rh on BaTiO 3 was similar to Rh on unmodified MgAl 2 O 4 . STEM measurements of Rh on CaTiO 3 films showed Rh remained well dispersed after repeated oxidations and reductions at 1073 K; however, the Rh was inactive for CO-oxidation. Rh formed small particles on SrTiO 3 films and was active for CO oxidation after reduction at 1073 K. The reducibility and catalytic activity of Rh/BaTiO 3 /MgAl 2 O 4 were similar to that of Rh/MgAl 2 O 4 . Evidence from CO-TPR, FTIR, and XPS all indicated that the degree of interaction between Rh and the three perovskite films can be ranked in the following order: Rh/CaTiO 3 /MgAl 2 O 4 > Rh/SrTiO 3 /MgAl 2 O 4 > Rh/BaTiO 3 /MgAl 2 O 4 . Here, bulk ex-solution catalysts, synthesized by reduction of ATi 0.98 Rh 0.02 O 3 (A = Ca, Sr, and Ba), were also examined for comparison.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A Josephson junction with h -BN tunnel barrier: observation of low critical current noise

Decoherence in quantum bits (qubits) is a major challenge for realizing scalable quantum computing. One of the primary causes of decoherence in qubits and quantum circuits based on superconducting Josephson junctions is the critical current fluctuation. Many efforts have been devoted to suppressing the critical current fluctuation in Josephson junctions. Nonetheless, the efforts have been hindered by the defect-induced trapping states in oxide-based tunnel barriers and the interfaces with superconductors in the traditional Josephson junctions. Motivated by this, along with the recent demonstration of 2D insulator h-BN with exceptional crystallinity and low defect density, we fabricated a vertical NbSe 2 /h-BN/Nb Josephson junction consisting of a bottom NbSe 2 superconductor thin layer and a top Nb superconductor spaced by an atomically thin h-BN layer. Furthermore, we characterized the superconducting current and voltage (I–V) relationships and Fraunhofer pattern of the NbSe 2 /h-BN/Nb junction. Notably, we demonstrated the critical current noise (1/f noise power) in the h-BN-based Josephson device is at least a factor of four lower than that of the previously studied aluminum oxide-based Josephson junctions. Our work offers a strong promise of h-BN as a novel tunnel barrier for high-quality Josephson junctions and qubit applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Chemistry and Interfacial Structure Promoting Quasi-van der Waals Epitaxial Growth of WS 2 Nanosheets on Sapphire for Prospective Application in Field-Effect Transistors

How do chemical and structural modifications to the supporting crystal surface affect the subsequent van der Waals (vdW) or quasi(Q)-vdW epitaxial growth of 2D nanocrystals? Developing an atomic-scale picture of such an interfacial system is crucial for understanding its impact on the physical and chemical properties of the supported 2D materials. The elucidation of the interfacial structure and chemistry needed to promote the Q-vdW epitaxial growth of 2D tungsten disulfide (WS 2 ) nanocrystals contributes to the growth mechanism understanding, thus pushing forward the integration of such atomically thin semiconductors toward real field-effect transistor applications. In addition to an atomic-force microscopy top view, we showcase a combination of X-ray techniques for a top-to-bottom investigation of the complexities of the buried interface structures. Furthermore, this approach uses X-ray photoelectron spectroscopy, X-ray standing wave excited X-ray fluorescence, and crystal truncation rod scattering to produce a highly resolved chemical-state-specific 3D atomic map for the extended interface structure of WS 2 /α-Al 2 O 3 (001). Employing these detailed analysis methods, along with density functional theory to further refine the picoscale structure, we demonstrate how two different types of interface engineering during the pregrowth stage lead to significant differences in the chemical and structural modifications to the terminal surface of c-face sapphire, which in turn leads to substantial differences in the submonolayer growth of supported WS 2 2D nanocrystals in terms of lateral domain sizes, epitaxial registry, vdW gaps, and stability.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Analytical Model for Atomic Relaxation in Twisted Moiré Materials

By virtue of being atomically thin, the electronic properties of heterostructures built from two-dimensional materials are strongly influenced by atomic relaxation. The atomic layers behave as flexible membranes rather than rigid crystals. Here we develop an analytical theory of lattice relaxation in twisted moiré materials. We obtain analytical results for the lattice displacements and corresponding pseudo gauge fields, as a function of twist angle. We benchmark our results for twisted bilayer graphene and twisted WSe 2 bilayers using large-scale molecular dynamics simulations. Our single-parameter theory is valid in graphene bilayers for twist angles 𝜃 ≳ 0.7°, and in twisted WSe 2 for 𝜃 ≳ 1.6°. Furthermore, we also investigate how relaxation alters the electronic structure in twisted bilayer graphene, providing a simple extension to the continuum model to account for lattice relaxation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Atomic Structure and Dynamics of Unusual and Wide-Gap Phase-Change Chalcogenides: A GeTe 2 Case

Brain-inspired computing, reconfigurable optical metamaterials, photonic tensor cores, and many other advanced applications require next-generation phase-change materials (PCMs) with better energy efficiency and a wider thermal and spectral range for reliable operations. Germanium ditelluride (GeTe 2 ), with higher thermal stability and a larger bandgap compared to current benchmark PCMs, appears promising for THz metasurfaces and the controlled crystallization of atomically thin 2D materials. Using high-energy X-Ray diffraction supported by first-principles simulation, the atomic structure in semiconducting pulsed laser deposition films and metallic high-temperature liquids is investigated. The results suggest that the structural and chemical metastability of GeTe 2 , leading to disproportionation into GeTe and Te, is related to high internal pressure during a semiconductor–metal transition, presumably occurring in the supercooled melt. Similar phenomena are expected for canonical GeS 2 and GeSe 2 under high temperatures and pressures.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Anisotropic band structure of TiS 3 nanoribbon revealed by polarized photocurrent spectroscopy

A re-discovered member of the layered material family, Titanium Trisulfide (TiS 3 ), has attracted intense research interest recently for the possibility of realizing an exciton insulator in the monolayer limit. However, due to their quasi-one-dimensional nature, thin TiS 3 flakes are typically in the form of nanoribbons that are challenging to characterize by optical absorption spectra, due to their small cross section. Here, we employ a sensitive photocurrent spectroscopy technique to probe the absorption of a thin TiS 3 nanoribbon in a field-effect transistor configuration. We have found a significant modification of the band structure of the thin TiS 3 nanoribbon, compared to its bulk counterpart. In addition, the polarization-dependent photocurrent spectra of thin TiS 3 nanoribbons exhibit greatly enhanced anisotropy compared to that of a thick TiS 3 device. The atomically thin TiS 3 flake, thus, not only provides an exciting platform for investigating many-body physics but also enables anisotropic quantum optoelectronics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Bottom-up Assembly of Nanoporous Graphene with Emergent Electronic States

The incorporation of nanoscale pores into a sheet of graphene allows it to switch from an impermeable semimetal to a semiconducting nanosieve. Nanoporous graphenes are desirable for applications ranging from high-performance semiconductor device channels to atomically thin molecular sieve membranes, and their performance is highly dependent on the periodicity and reproducibility of pores at the atomic level. Achieving precise nanopore topologies in graphene using top-down lithographic approaches has proven to be challenging due to poor structural control at the atomic level. Alternatively, atomically precise nanometer-sized pores can be fabricated via lateral fusion of bottom-up synthesized graphene nanoribbons. This technique, however, typically requires an additional high temperature cross-coupling step following the nanoribbon formation that inherently yields poor lateral conjugation, resulting in 2D materials that are weakly connected both mechanically and electronically. Here, we demonstrate a novel bottom-up approach for forming fully conjugated nanoporous graphene through a single, mild annealing step following the initial polymer formation. We find emergent interface-localized electronic states within the bulk band gap of the graphene nanoribbon that hybridize to yield a dispersive two-dimensional low-energy band of states. We show that this low-energy band can be rationalized in terms of edge states of the constituent single-strand nanoribbons. The localization of these 2D states around pores makes this material particularly attractive for applications requiring electronically sensitive molecular sieves.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Deep-ultraviolet transparent conducting SrSnO 3 via heterostructure design

Exploration and advancements in ultrawide bandgap (UWBG) semiconductors are pivotal for next-generation high-power electronics and deep-ultraviolet (DUV) optoelectronics. Here, we used a thin heterostructure design to facilitate high conductivity due to the low electron mass and relatively weak electron-phonon coupling, while the atomically thin films ensured high transparency. We used a heterostructure comprising SrSnO 3 /La:SrSnO 3 /GdScO 3 (110), and applied electrostatic gating, which allow us to effectively separate charge carriers in SrSnO 3 from dopants and achieve phonon-limited transport behavior in strain-stabilized tetragonal SrSnO 3 . This led to a modulation of carrier density from 10 18 to 10 20 cm −3 , with room temperature mobilities ranging from 40 to 140 cm 2 V −1 s −1 . The phonon-limited mobility, calculated from first principles, closely matched experimental results, suggesting that room temperature mobility could be further increased with higher electron density. In addition, the sample exhibited 85% optical transparency at a 300-nm wavelength. These findings highlight the potential of heterostructure design for transparent UWBG semiconductor applications, especially in DUV regime.

Science & Technology - Other Topics↗