Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “asymptotic analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Determination of asymptotic normalization coefficients for the channel 16 O→ α+ 12 C: excited state 16 O(0 + ; 6.05 MeV)

Asymptotic normalization coefficients (ANC) determine the overall normalization of cross sections of peripheral radiative capture reactions. In the present paper, we treat the ANC C for the virtual decay 16 O(0 + ; 6.05 MeV)→ α+ 12 C(g.s.), the known values of which are characterized by a large spread (0.29 - 1.65) × 10 3 fm -1/2 . The ANC C is found by analytic continuation in energy of the α 12 C s-wave scattering amplitude, known from the phase-shift analysis of experimental data, to the pole corresponding to the 16O bound state and lying in the unphysical region of negative energies. To determine C, two different methods of analytic continuation are used. In the first method, the scattering data are approximated by the sum of polynomials in energy in the physical region and then extrapolated to the pole. The best way of extrapolation is chosen on the basis of the exactly solvable model. Within the second approach, the ANC C is found by solving the Schrödinger equation for the two-body α 12 C potential, the parameters of which are selected from the requirement of the best description of the phase-shift analysis data at a fixed experimental binding energy of 16 O(0 + ; 6.05 MeV) in the α+ 12 C channel. The values of the ANC C obtained within these two methods lie in the interval (886–1139) fm -1/2 .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Application of Detectability Analysis for Power System Dynamic State Estimation

To guide the measurement placement and selection for dynamic state estimation in power systems, it is important to determine the existence of an observer that can estimate the dynamic states. Past studies have been focused on observability analysis, which determines whether the initial states can be uniquely determined. In this paper, detectability analysis is proposed to determine whether the current states can be estimated as time involving. Through the proposed detectability analysis, the states of an unobservable system can be categorized into the detectable states and undetectable states. It is shown that if the eigenvalues corresponding to the unobservable states are stable, the states are detectable and their estimates will converge to the true ones asymptotically. The study can be used to guide measurement placement and selection.

Detectability, dynamic state estimation↗
DOE OSTI2021

A theoretical approach for transient shock strengthening in high-energy-density laser compression experiments

In high-energy-density shock compression experiments, the desired state of compression is typically achieved by passing shock waves through a sequence of different materials. Here, a theoretical approach for transiently strengthening such shocks passing through interfaces of experimentally relevant impedance ratios is examined. A semi-analytical method based on characteristics analysis is used to solve the problem of a shock passing from one material to another through an intermediate region of non-uniform impedance; by appropriately designing this region, a greater shock strength can be achieved in the second material for a finite duration than in the absence of this region. When a shock passes into a material of higher impedance, the shock strengthening increases to a maximum before decreasing to an asymptotic value as the strength of the incident shock is increased. For shocks passing into materials of decreasing impedance, the shock strengthening increases monotonically as the strength of the incident shock is increased when the impedance ratio is above a critical threshold. Incorporating multiple intermediate materials can further increase the strength of the transmitted shock, with an exponential discretization of intermediate material impedances being the most effective distribution for strengthening strong shocks. The results suggest that up to 25% and 9% increases in pressure behind the leading shock can be achieved for materials of increasing and decreasing impedance, respectively. The technique is applied to the design of laser-driven dynamic compression experiments, and the results of the analysis are verified via comparison to simulations performed with the HYADES hydrodynamics code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Architectural scaling tradeoffs in modular 3D bosonic quantum processors

We propose a modular three-dimensional bosonic quantum processor built from repeatable coupled-cavity modules linked by configurable interconnect networks. Using hardware-motivated graph-theoretic measures, we compare nearest-neighbor, hub-based, and hybrid architectures in terms of interconnect count, communication distance, resource concentration, and implementation complexity. Rather than identifying a universally optimal topology, our analysis shows how these architectures redistribute the costs of scaling, including wiring and port requirements, nonlocal communication distance, exposure to shared resources, routing bottlenecks, and scheduling overhead. Case studies of a \(3\times3\) processor and a larger hierarchical architecture further distinguish finite-size performance from asymptotic scaling. The resulting framework provides a systematic basis for evaluating modular three-dimensional bosonic processors and for identifying the device-level parameters required for quantitative hardware design.

Zhu, Shaojiang [Fermilab] (ORCID:0000000293180092)↗
DOE OSTI2024

Shock wave formation in radiative plasmas

The temporal evolution of weak shocks in radiative media is theoretically investigated in this work. The structure of radiative shocks has traditionally been studied in a stationary framework. Their systematic classification is complex because layers of optically thick and thin regions alternate to form a radiatively-driven precursor and a temperature-relaxation layer, between which the hydrodynamic shock is embedded. In this work, we analyze the formation of weak shocks when two radiative plasmas with different pressures are put in contact. Applying a reductive perturbative method yields a Burgers-type equation that governs the temporal evolution of the perturbed variables including the radiation field. The conditions upon which optically thick and thin solutions exist have been derived and expressed as a function of the shock strength and Boltzmann number. Below a certain Boltzmann number threshold, weak shocks always become optically thick asymptotically in time, while thin solutions appear as transitory structures. The existence of an optically thin regime is related to the presence of an overdense layer in the compressed material. Scaling laws for the characteristic formation time and shock width are provided for each regime. The theoretical analysis is supported by FLASH simulations, and a comprehensive testcase has been designed to benchmark radiative hydrodynamic codes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Mechanical analysis of heterogeneous materials with higher-order parameters

Abstract Even though heterogeneous porous materials are widely used in a variety of engineering and scientific fields, such as aerospace, energy-storage technology, and bio-engineering, the relationship between effective material properties of porous materials and their underlying morphology is still not fully understood. To contribute to this knowledge gap, this paper adopts a higher-order asymptotic homogenization method to numerically investigate the effect of complex micropore morphology on the effective mechanical properties of a porous system. Specifically, we use the second-order scheme that is an extension of the first-order computational homogenization framework, where a generalized continuum enables us to introduce length scale into the material constitutive law and capture both pore size and pore distribution. Through several numerical case studies with different combinations of porosity, pore shapes, and distributions, we systematically studied the relationship between the underlying morphology and effective mechanical properties. The results highlight the necessity of higher-order homogenization in understanding the mechanical properties and reveal that higher-order parameters are required to capture the role of realistic pore morphologies on effective mechanical properties. Furthermore, for specific pore shapes, higher-order parameters exhibit dominant influence over the first-order continuum.

42 ENGINEERING↗
DOE OSTI2022

Modeling Dust Production, Growth, and Destruction in Reionization-era Galaxies with the CROC Simulations: Methods and Parameter Exploration

We introduce a model for the explicit evolution of interstellar dust in a cosmological galaxy formation simulation. We post-process a simulation from the Cosmic Reionization on Computers project, integrating an ordinary differential equation for the evolution of the dust-to-gas ratio along pathlines in the simulation sampled with a tracer particle technique. This model incorporates the effects of dust grain production in asymptotic giant branch star winds and supernovae, grain growth due to the accretion of heavy elements from the gas phase of the interstellar medium, and grain destruction due to thermal sputtering in the high-temperature gas of supernova remnants due to thermal sputtering. A main conclusion of our analysis is the importance of a carefully chosen dust destruction model, for which different reasonable parameterizations can predict very different values at the ∼100 pc resolution of the interstellar medium (ISM) in our simulations. We run this dust model on the single most massive galaxy in a 10 h$^{−1}$ comoving megaparsec box, which attains a stellar mass of ∼2 × 10$^{9}$ M $_{⊙}$ by z = 5. We find that the model is capable of reproducing dust masses and dust-sensitive observable quantities broadly consistent with existing data from high-redshift galaxies. The total dust mass in the simulated galaxy is somewhat sensitive to parameter choices for the dust model, especially the timescale for grain growth due to accretion in the ISM. Consequently, observable quantity observations that can constrain galaxy dust masses at these epochs are potentially useful for placing constraints on dust physics.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Momentum in single-trace $T$$\overline{T}$ holography

We continue our exploration of the holographic duality between string theory in backgrounds that interpolate between asymptotically linear dilaton spacetime in the UV and AdS 3 in the IR, and the corresponding boundary theories. In previous papers, [1], [2], we showed that states in the bulk theory that are described by non-trivial asymptotically linear dilaton geometries, such as black holes and deformed global AdS 3 , can be described in the boundary theory by a single-trace $T$$\overline{T}$ deformation of a symmetric product theory. In those papers, we restricted to states with vanishing (angular) momentum; in this paper, we extend the analysis to states with arbitrary momentum, and show that the picture presented in the earlier papers generalizes to this case.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Simulations and models for the Richtmyer–Meshkov instability with broadband perturbations

The Richtmyer–Meshkov instability (RMI) is shock driven and affects many phenomena from inertial fusion to supernova explosions. The behavior of single-modes in the RMI has been studied extensively but less is known with the broadband perturbations that occur in applications. Here, we describe extensive numerical simulations and modeling of the RMI with broadband perturbations with an initial power spectrum of the form P ∝ km, where k is the wavenumber. The hydrodynamic condition is the same as in the θ-Group Collaboration [Thornber et al., “Late-time growth rate, mixing, and anisotropy in the multimode narrowband Richtmyer–Meshkov instability: The θ-group collaboration,” Phys. Fluids 29, 105107 (2017)] with a Mach ∼1.86 shock and gamma-law = 5/3 fluids with Atwood number A = −0.5. The bubble amplitude hB is found to grow in two stages. Initially, hB undergoes a phase-inversion and grows linearly in time (t) at a rate consistent with a linear theory. Asymptotically, hB grows as a power law ∼tθ when k|hB| > O(1), where k is the average wavenumber for the initial spectrum. The RMI behavior in simulations and modeling agree over a wide range of exponent m, spectral width, initial amplitude, and time. The agreement is quantified objectively using statistical analysis.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Breakdown of order fractionalization in the CPT model

Here, we present an analysis of the half-filled CPT model, an analytically tractable Kondo lattice model with Yao-Lee spin-spin interactions on a 3D hyperoctagon lattice, proposed by Coleman, Panigrahi, and Tsvelik. Previous studies have established that the CPT model exhibits odd-frequency triplet superconductivity and order fractionalization. Through asymptotic analyses in the small- and large- Kondo coupling limits, we identify a quantum critical point at , marking a transition from a superconductor to a Kondo insulator. By estimating the vison gap energy to account for thermal gauge fluctuations, we determine the energy scales governing the thermal breakdown of order fractionalization. Moreover, at large the Kondo insulator undergoes orbital decoupling, leading to the formation of a decoupled Kitaev orbital liquid. These findings and analogies with the -gauged model lead us to propose a tentative phase diagram for the CPT model at half-filling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

ASCEND: Asymptotically compatible strong form foundations for nonlocal discretization

Nonlocal models naturally handle a range of physics of interest to SNL, but discretization of their underlying integral operators poses mathematical challenges to realize the accuracy and robustness commonplace in discretization of local counterparts. This project focuses on the concept of asymptotic compatibility, namely preservation of the limit of the discrete nonlocal model to a corresponding well-understood local solution. We address challenges that have traditionally troubled nonlocal mechanics models primarily related to consistency guarantees and boundary conditions. For simple problems such as diffusion and linear elasticity we have developed complete error analysis theory providing consistency guarantees. We then take these foundational tools to develop new state-of-the-art capabilities for: lithiation-induced failure in batteries, ductile failure of problems driven by contact, blast-on-structure induced failure, brittle/ductile failure of thin structures. We also summarize ongoing efforts using these frameworks in data-driven modeling contexts. This report provides a high-level summary of all publications which followed from these efforts.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Modal analysis of the behavior of inertial particles in turbulence subjected to Stokes drag

The clustering of small heavy inertial particles subjected to Stokes drag in turbulence, which is the concern of present study, is known to be minimal at small and large Stokes number and substantial at St = $\textit{O}$(1). This nonmonotonic trend, which has been shown computationally and experimentally, is yet to be explained analytically. In this study, we obtain an analytical expression for the Lyapunov exponents that quantitatively predicts this trend. The sum of the exponents, which is the normalized rate of change of the signed volume of a small cloud of particles, is correctly predicted to be negative and positive at small and large Stokes numbers, respectively, asymptoting to $\textit{τQ}$ as $\textit{τ}$ → 0 and $τ^{–1/2}|Q|^{1/4}$ as $\textit{τ} → ∞$, where $\textit{τ}$ is the particle relaxation time and $\textit{Q(τ)}$ is the difference between the norm of the rotation- and strain-rate tensors computed along the particle trajectory, which remains negative at all $\textit{τ}$ in turbulent flows. Additionally, the trajectory crossing is predicted only in hyperbolic flows where Q < 0 for sufficiently inertial particles with a $\textit{τ}$ that scales with $|Q|^{–1/2}$. Following the onset of crossovers, a transition from clustering to dispersion is predicted correctly. We show these behaviors are not unique to three-dimensional isotropic turbulence and can be reproduced closely by a one-dimensional mono-harmonic flow, which appears as a fundamental canonical problem in the study of particle clustering. Analysis of this one-dimensional canonical flow shows that the rate of clustering, quantified as the product of the Lyapunov exponent and particle relaxation time, is bounded by –1/2, behaving with extreme nonlinearity in the hyperbolic flows and always remaining positive in the elliptic flows. Finally, this model problem also confirms that dispersion in a hyperbolic flow will occur only if particles' trajectory cross. These findings, which stem from our analysis, are corroborated by the direct numerical simulations.

42 ENGINEERING↗
DOE OSTI2020

Molecular dynamics and continuum analyses of the electrokinetic zeta potential in nanostructured slit channels

This work presents a theoretical and numerical study of electrokinetic flow and the zeta potential for the case of slit channels with nanoscale surface features of dimensions comparable to the Debye length, by employing molecular dynamics simulations and continuum-level analyses. Additionally, a simple analytical model for considering the average effect of such surface features producing nanoscale roughness is proposed by employing matched asymptotic solutions for the charge density and fluid flow field, and matching conditions that satisfy electroneutrality and the Onsager reciprocal relation between the electroosmotic flow rate and streaming current. The proposed analytical model quantitatively accounts for results from molecular dynamics simulations that consider the presence of ion solvation shells and surface hydration layers. Our analysis indicates that a simultaneous knowledge of the electroosmotic and pressure-driven flow rate or streaming current can be instrumental to unambiguously determine the zeta potential in the presence of nanoscale surface features.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Constraining accuracy of the pairwise velocities in N -body simulations using scale-free models

We present a continuation of an analysis that aims to quantify resolution of N-body simulations by exploiting large (up to N = 4096 3 ) simulations of scale-free cosmologies run using abacus. Here, we focus on radial pairwise velocities of the matter field, both by direct estimation and through the cumulative two-point correlation function (using the pair conservation equation). We find that convergence at the 1 per cent level of the mean relative pairwise velocity can be demonstrated over a range of scales, evolving from a few times the grid spacing at early times to slightly below this scale at late times. We show the analysis of two different box sizes as well as from averaging results from the smaller boxes, and compare the power of the two aforementioned estimators in constraining accuracy at each scale. Down to scales of the order of the smoothing parameter, convergence is obtained at ∼5 per cent precision, and shows a behaviour indicating asymptotic stable clustering. In conclusion, we also infer for LCDM simulations conservative estimates on the evolution of the lower cut-off to resolution (at 1 and 5 per cent precision) as a function of redshift.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

A supernodal all-pairs shortest path algorithm

We show how to exploit graph sparsity in the Floyd-Warshall algorithm for the all-pairs shortest path (Apsp) problem. Floyd-Warshall is an attractive choice for Apsp on high-performing systems due to its structural similarity to solving dense linear systems and matrix multiplication. However, if sparsity of the input graph is not properly exploited, Floyd-Warshall will perform unnecessary asymptotic work and thus may not be a suitable choice for many input graphs. To overcome this limitation, the key idea in our approach is to use the known algebraic relationship between Floyd-Warshall and Gaussian elimination, and import several algorithmic techniques from sparse Cholesky factorization, namely, fill-in reducing ordering, symbolic analysis, supernodal traversal, and elimination tree parallelism. When combined, these techniques reduce computation, improve locality and enhance parallelism. We implement these ideas in an efficient shared memory parallel prototype that is orders of magnitude faster than an efficient multi-threaded baseline Floyd-Warshall that does not exploit sparsity. Our experiments suggest that the Floyd-Warshall algorithm can compete with Dijkstra's algorithm (the algorithmic core of Johnson's algorithm) for several classes sparse graphs.

Sao, Piyush↗
DOE OSTI2020

Effect of boundary conditions on fluctuations of the Bose condensate of interacting atoms

For a gas of trapped interacting atoms forming a Bose condensate, we demonstrate a possibility of a significant influence of the boundary conditions on the statistics of the number of particles in the fundamental mode of the system. The analysis is carried out in the Bogoliubov – Popov low-temperature approximation for model homogeneous cubic traps with periodic or combined periodic and zero boundary conditions. It is shown that the effect of the boundary conditions does not weaken even in the region of parameters corresponding to the relatively strong interaction in the Thomas – Fermi asymptotic case, and does not disappear when proceeding to the thermodynamic limit. (paper)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

On unifying randomized methods for inverse problems

This work unifies the analysis of various randomized methods for solving linear and nonlinear inverse problems with Gaussian priors by framing the problem in a stochastic optimization setting. By doing so, we show that many randomized methods are variants of a sample average approximation (SAA). More importantly, we are able to prove a single theoretical result that guarantees the asymptotic convergence for a variety of randomized methods. Additionally, viewing randomized methods as an SAA enables us to prove, for the first time, a single non-asymptotic error result that holds for randomized methods under consideration. Another important consequence of our unified framework is that it allows us to discover new randomization methods. Here, we present various numerical results for linear, nonlinear, algebraic, and PDE-constrained inverse problems that verify the theoretical convergence results and provide a discussion on the apparently different convergence rates and the behavior for various randomized methods.

42 ENGINEERING↗
DOE OSTI2024

Boundary correlators and the Schwarzian mode

The effective low temperature dynamics of near-extremal black holes is governed by the quantum fluctuations of the Schwarzian mode of JT gravity. Utilizing as a proxy a planar charged black hole in asymptotically Anti-de-Sitter spacetime, we investigate the effects of these fluctuations on a probe scalar field. The corresponding holographic real-time boundary correlators are computed following a holographic renormalization procedure, using the dubbed gravitational Schwinger-Keldysh geometry (grSK) and known exact results of boundary correlators from the near-horizon region. This analysis gives rise to a retarded Green’s function that decays as a power law for late Lorentzian times. Its analytic structure indicates the presence of a branch cut in the complex frequency domain at finite temperature. These features are a non-perturbative hallmark that prevails as long as the planar transverse space is kept compact.

2D Gravity↗