Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “angular deformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Minor titanium addition markedly improves the co-deformability of copper-tantalum composites

We investigated the microstructures of equal channel angular extrusion (ECAE) processed sintered composites of copper (Cu) and tantalum (Ta). These composites were produced with nominal Ta volume percentages ranging from 25% to 75%. Additional composites of the same nominal Ta content were prepared with a minor amount of titanium (Ti) added to facilitate interphase bonding. Ti addition was found to markedly improve the strength and co-deformability of the composites, allowing reliable extrusion of Cu-Ta composites with novel microstructures. A major influence of the Ti appears to be to soften the Ta, which contributes to improved co-deformability by reducing the flow stress mismatch between the composite constituents. Here, a change in the fracture surface morphology in the Ti-modified composite compared to the unmodified composite suggests that the Ti may also improve cohesion between Cu and Ta by reducing Ta surface oxides.

36 MATERIALS SCIENCE↗

Triaxial superdeformation in {sup 40}Ar

Superdeformed (SD) states in {sup 40}Ar have been studied using the deformed-basis antisymmetrized molecular dynamics. Low-energy states were calculated by the parity and angular momentum projection and the generator coordinate method (GCM). Basis wave functions were obtained by the energy variation with a constraint on the quadrupole deformation parameter beta, while other quantities such as triaxiality gamma were optimized by the energy variation. By the GCM calculation, an SD band was obtained just above the ground-state band. The SD band involves a K{sup p}i=2{sup +} side band due to the triaxiality. The calculated electric quadrupole transition strengths of the SD band reproduce the experimental values appropriately. Triaxiality is significant for understanding low-lying states.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Workability Limits of Magnesium Alloy AZ31B Subjected to Equal Channel Angular Pressing

Equal channel angular pressing (ECAP) is an important severe plastic deformation process to produce ultrafine grained microstructures in metals and alloys. Magnesium and its alloys generally possess poor workability at temperatures below 250 °C. This investigation examines the influence of different passes and processing routes of ECAP on improving the workability of Mg alloy AZ31B. ECAP was carried out for three passes using a die of angle 120° using processing routes Bc and C. The operating temperature was 523 K for the first pass and 423 K for the subsequent two passes. The resultant microstructure and mechanical properties were determined. Workability of the alloy at 423 K (150 °C) was determined using upsetting experiments on cylindrical specimens machined from the annealed and ECAPed samples. Workability limit diagrams have been constructed for the various processed conditions. The workability data generated were also analyzed using five different workability criteria (also referred to as ductile fracture models) and the material constants for these five models were evaluated. Specimens processed by two passes through route C (pass 2C) exhibits better workability compared to other passes since the workability limit line after this pass shows maximum safe working area and lies above the other workability lines. Among the five different workability criteria investigated, the Freudenthal workability criterion is more suitable for prediction of failure in this alloy.

36 MATERIALS SCIENCE↗

COUPLED SPIN AND SHAPE EVOLUTION OF SMALL RUBBLE-PILE ASTEROIDS: SELF-LIMITATION OF THE YORP EFFECT

We present the first self-consistent simulations of the coupled spin-shape evolution of small gravitational aggregates under the influence of the YORP effect. Because of YORP’s sensitivity to surface topography, even small centrifugally driven reconfigurations of aggregates can alter the YORP torque dramatically, resulting in spin evolution that can differ qualitatively from the rigid-body prediction. One-third of our simulations follow a simple evolution described as a modified YORP cycle. Two-thirds exhibit one or more of three distinct behaviors—stochastic YORP, self-governed YORP, and stagnating YORP—which together result in YORP self-limitation. Self-limitation confines rotation rates of evolving aggregates to far narrower ranges than those expected in the classical YORP cycle, greatly prolonging the times over which objects can preserve their sense of rotation. Simulated objects are initially randomly packed, disordered aggregates of identical spheres in rotating equilibrium, with low internal angles of friction. Their shape evolution is characterized by rearrangement of the entire body, including the deep interior. They do not evolve to axisymmetric top shapes with equatorial ridges. Mass loss occurs in one-third of the simulations, typically in small amounts from the ends of a prolate-triaxial body. We conjecture that YORP self-limitation may inhibit formation of top-shapes, binaries, or both, by restricting the amount of angular momentum that can be imparted to a deformable body. Stochastic YORP, in particular, will affect the evolution of collisional families whose orbits drift apart under the influence of Yarkovsky forces, in observable ways.

79 ASTRONOMY AND ASTROPHYSICS↗

Application of unsteady airfoil theory to rotary wings

A clarification is presented on recent work concerning the application of unsteady airfoil theory to rotary wings. The application of this theory may be seen as consisting of four steps: (1) the selection of an appropriate unsteady airfoil theory; (2) the resolution of that velocity which is the resultant of aerodynamic and dynamic velocities at a point on the elastic axis into radial, tangential and perpendicular components, and the angular velocity of a blade section about the deformed axis; (3) the expression of lift and pitching moments in terms of the three components; and (4) the derivation of explicit expressions for the components in terms of flight velocity, induced flow, rotor rotational speed, blade motion variables, etc.

Kaza, K. R. V.↗

Microscopic description of the torque acting on fission fragments

When two fragments are created in a fission decay, any torque due to nuclear and Coulomb interaction can change the fragment's angular momentum. This paper explores the character and magnitude of the angular momentum as a function of the initial conditions around the scission point using the time-dependent Hartree-Fock theory. To understand the torque acting on the fragments, the Frozen Hartree-Fock method is also used to determine the collective potential at scission. Two 240 Pu fission channels ( 132 Sn + 108 Ru and 144 Ba + 96 Sr) are studied. Further, these two channels cover different shapes (spherical, quadrupole, and octupole deformation) of the fragments. It is found that the angular momentum generated by the Coulomb interaction after fission is mainly collective, while this is not the case for the angular momentum generated at scission. The competition between rotational modes (bending, wriggling, and twisting) is discussed and shows that the angular momentum is generated mainly perpendicular to the fission axis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Analysis of Abrasive Blasting of DOP-26 Iridium Alloy

The effects of abrasive blasting on the surface geometry and microstructure of DOP-26 iridium alloy (Ir-0.3% W-0.006% Th 0.005% Al) have been investigated. Abrasive blasting has been used to control emissivity of components operating at elevated temperature. The effects of abrasive blasting conditions on surface morphology were investigated both experimentally and by numerical modeling. The simplified model, based on finite element analysis of a single angular particle impacting on Ir alloy disk, calculates the surface deformation and residual strain distribution. The experimental results and modeling results both indicate that the surface geometry is not sensitive to the abrasive blast process conditions of nozzle pressure and standoff distance considered in this study. On the other hand, the modeling results suggest that the angularity of the abrasive particle has an important role in determining surface geometry, which in turn, affects the emissivity. Abrasive blasting causes localized surface strains and localized recrystallization, but it does not affect grain size following extended exposure at elevated temperature. The dependence of emissivity of the DOP-26 alloy on mean surface slope follows a similar trend to that reported for pure iridium.

36 MATERIALS SCIENCE↗

Towards an optical potential for rare-earths through coupled channels

The coupled-channel theory is a natural way of treating nonelastic channels, in particular those arising from collective excitations, defined by nuclear deformations. Proper treatment of such excitations is often essential to the accurate description of reaction experimental data. Previous works have applied different models to specific nuclei with the purpose of determining angular-integrated cross sections. In this work, we present an extensive study of the effects of collective couplings and nuclear deformations on integrated cross sections as well as on angular distributions in a consistent manner for neutron-induced reactions on nuclei in the rare-earth region. This specific subset of the nuclide chart was chosen precisely because of a clear static deformation pattern. We analyze the convergence of the coupled-channel calculations regarding the number of states being explicitly coupled. Inspired by the work done by Dietrich et al., a model for deforming the spherical Koning-Delaroche optical potential as function of quadrupole and hexadecupole deformations is also proposed. We demonstrate that the obtained results of calculations for total, elastic and inelastic cross sections, as well as elastic and inelastic angular distributions correspond to a remarkably good agreement with experimental data for scattering energies above around a few MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Conservation properties in the time-dependent Hartree Fock theory

We discuss the conservation of angular momentum in nuclear time-dependent Hartree-Fock calculations for a numerical representation of wave functions and potentials on a three-dimensional Cartesian grid. Free rotation of a deformed nucleus performs extremely well even for relatively coarse spatial grids. Heavy ion collisions produce a highly excited compound system associated with substantial nucleon emission. These emitted nucleons reach the bounds of the numerical box which leads to a decrease of angular momentum. We discuss strategies to distinguish the physically justified loss from numerical artifacts.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear magnetic moments and related sum rules

We first review the history and our present understanding of nuclear magnetic moments and Gamow-Teller transitions, with emphasis on the roles of configuration mixing and meson exchange currents. Then we discuss the renormalization of the orbital g-factor in nuclei, and its relation to the E1 sum rule for photoabsorption and the M1 sum rule for the scissors mode of deformed nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Deformed 'commutative' Chern-Simons' system

Noncommutative Chern-Simons' system is non-perturbatively investigated at a full deformed level. A deformed 'commutative' phase space is found by a non-canonical change between two sets of deformed variables of noncommutative space. It is explored that in the 'commutative' phase space all calculations are similar to the case in commutative space. Spectra of its energy and angular momentum of the Chern-Simons' system are obtained at the full deformed level. The noncommutative-commutative correspondence is clearly showed. Formalism for the general dynamical system is briefly presented. Some subtle points are clarified.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Collectivity-induced quenching of signatures for shell closures

Mass differences are an often used as signature and measure for shell closure. Using the angular-momentum projected generator coordinate method and the Skyrme interaction SLy4, we analyze the modification of mass differences due to static deformation and dynamic fluctuations around the mean-field ground state.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Microstructures in the 6060 aluminium alloy after various severe plastic deformation treatments

This paper presents the results concerning the microstructural refinement of the industrial 6060 aluminium alloy processed by severe plastic deformation (SPD). The high level of plastic deformation was achieved using the three methods: hydrostatic extrusion (HE), equal channel angular extrusion (ECAE) and extrusion torsion (ET), which differed in the dynamics of the loading, intensity and homogeneity of the plastic strain field. Microstructure analyses were performed before and after SPD deformation using a transmission (TEM) and a scanning electron microscope (SEM). The refined microstructures were examined qualitatively and quantitatively by the stereological methods and computer image analyses. The microstructure of the industrial 6060 aluminium alloy after deformation was characterized by an average grain size of about 0.4 {mu}m. The results show that the precipitates strongly affect the degree of refinement and the mechanism of microstructural transformations. During the SPD, the second phase particles break apart and homogenize. The HE method generates the largest increase of the volume fraction of the small primary particles. Moreover, the HE process is most effective in reducing the primary particle size. During HE and ECAE processes the second phase precipitates dissolve partially and change their shape. - Research Highlights: {yields} SPD results in a significant increase in the density of the small primary particles. {yields} SPD homogenizes the particle size distribution. {yields} HE and ECAE processes bring nano-grains in the vicinity of the primary particles. {yields} HE and ECAE processing results in the {beta}' precipitates partial dissolutions. {yields} During HE and ECAE processes the {beta}' particles change their shape.

36 MATERIALS SCIENCE↗

Self-Organization of Multiscale Structural Groups in a Low-Carbon Wire Subjected to Severe Drawing

The peculiarities of the mechanical parameters and atomic structure of wires made of 08G2S steel subjected to severe drawing with a combination of shear and classical circular drawing of different diameters. The split form of interference maximums (211) in X-ray diagrams of samples is evidence for delamination in families of the mentioned planes into contracted and extended groups, which is accompanied by the partial order–disorder phase transition with formation of the amorphized fraction from fragments of nanosized atomic groups of these planes (clusters). The dependence on steel deformation revealed the nature of the change in the symmetry of the distribution of structural groups relative to the angular position of the diffraction maximum from the planes (211). It is established that with increased deformation (ε > 30%) the intensities of coherent and incoherent X-ray CrK{sub α}-emissions vary quantitatively, which proves the development of self-organizing processes contributing to the increase in the volume fraction of the order relative to the disorder in 08G2S steel, even subject to severe mechanical loading.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Angular dependence of Raman scattering selection rules for long-wavelength optical phonons in short-period GaAs/AlAs superlattices

The angular dependence of Raman scattering selection rules for optical phonons in short-period (001) GaAs/AlAs superlattices is calculated and experimentally studied. Experiments are performed using a micro-Raman setup, in the scattering geometry with the wavevectors of the incident and scattered light lying in the plane of superlattices (so-called in-plane geometry). Phonon frequencies are calculated using the Born model taking the Coulomb interaction into account in the rigid-ion approximation. Raman scattering spectra are calculated in the framework of the deformation potential and electro-optical mechanisms. Calculations show an angular dependence of the selection rules for optical phonons with different directions of the wavevectors. Drastic differences in the selection rules are found for experimental and calculated spectra. Presumably, these differences are due to the Fröhlich mechanism in Raman scattering for short-period superlattices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Selection rules for electromagnetic transitions in triaxially deformed odd-A nuclei

The approximate selection rules for the interband and intraband electromagnetic transitions are predicted referring to two quantum numbers, which are derived from an algebraic solution for the particle-rotor model with one high-j nucleon coupled to a triaxially deformed core. It is shown that the inclusion of angular momentum dependence for moments of inertia reproduces the experimental excitation energies relative to a reference quite well both for positive and negative parity TSD bands in {sup 161,163,165,167}Lu.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Seamless Nb tubes for SRF cavities

A. Executive Summary Understanding Developed Relationships between level of work, plastic strain orientation, level of annealing, grain size, strength, ductility, and texture were developed for heavily worked bulk RRR grade cast pure niobium (Nb). Technical Effectiveness of Approach Part A: The approach used for plastic deformation of bulk Nb was room temperature equal channel angular extrusion (ECAE). This approach is very effective for microstructural breakdown of worked and post-strain recrystallized Nb. A major problem with breaking down the microstructure of cast Nb is development of a consistent (repeatable) and uniform microstructure. This is most effectively accomplished by a series of orthogonal working steps (multipass ECAE (mECAE)) separated by full recrystallization. Forming tube from such material leads to a uniform microstructure in the tube. Part B: The approach developed to produce a microstructure in thin-walled tube that is very favorable for hydroforming into a superconducting radio frequency (SRF) cavity is tube-ECAE (tECAE). Tube-ECAE results in an axisymmetric circumferentially uniform microstructure with a texture more favorable for expansion hydroforming than tube formed by conventional methods such as extrusion, drawing, and ironing. Economic Feasibility of Methods Investigated and Demonstrated Although this was not demonstrated because of funding limitations, it is strongly believed that mECAE combined with intermediate recrystallization heat treatments and tECAE are economically viable approaches for producing a consistent, uniform, fine- or coarse-grained microstructure in RRR grade Nb tube starting from a large-grained and highly textured cast ingot. These methods are relatively easy to apply; the challenge is development of equipment and tooling that works well and is operator friendly. Commercially viable ECAE tooling for bulk Nb microstructure breakdown was developed; significant progress was made on the design of scaled-up equipment for tECAE. Patents on tECAE have been granted in Europe, Japan, and the United States. Public Benefit The approaches developed for fabricating RRR grade Nb tubing suitable for hydroforming into multi-cell SRF cavities have substantial public benefit because they will enable the manufacture of lower cost multicell SRF cavities for advanced linear particle accelerators. In addition, the approach developed for fabricating uniform and consistent axisymmetric microstructures in metal tubing can be applied to tubes made of metal alloys other than Nb. Applications exist in Ta tubing for superconductor wire applications, Mg alloy tubing for bio-implants, and aerospace tubing for structural hollow section components. The idea of tECAE can be applied to heal the heat affected zone (HAZ) in seam-welded tubing, thus erasing or healing the low-strength properties in the weld zone.

36 MATERIALS SCIENCE↗