Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “actinide separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Kinetics of Ion Exchange of Zr/Sn(IV) Phosphonate–Phosphate Hybrid Materials for Separation of Lanthanides from Oxidized Actinides

The kinetics of ion exchange of Zr/Sn(IV) phosphonate-phosphate hybrid ion exchange materials have been studied with several types of ions of specific interest to nuclear fuel recycling including Nd 3+ at 4.5 and 43 mM and NpO 2 + at 2.9 mM spanning multiple HNO 3 concentrations. In most cases the equilibrium was reached in less than 12 h. The ion exchange behavior followed that of pseudo first-order adsorption with rates ranging from 0.430–4.10 h -1 and 0.290–0.435 h -1 for Nd 3+ and NpO 2 + , respectively. A separation with both Nd 3+ and NpO 2 + present was performed, resulting in separation factors of 1.9–12, 1.7–6.6, and 2.0–5.7 at 1×10 -1 , 1×10 -2 , and 1×10 -3 M HNO 3 , respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gamma and pulsed electron radiolysis studies of CyMe 4 BTBP and CyMe 4 BTPhen: Identification of radiolysis products and effects on the hydrometallurgical separation of trivalent actinides and lanthanides

The radiolytic stability of the highly selective ligands CyMe 4 BTBP and CyMe 4 BTPhen against ionizing gamma radiation was studied in 1-octanol solution. CyMe 4 BTBP and CyMe 4 BTPhen are important extractants for a potential treatment of used nuclear fuel. They were studied under identical experimental conditions to directly compare the effects of gamma and pulsed electron radiolysis on the ligands and systematically study the influence of structural changes in the ligand backbone. Distribution ratios of Am 3+ , Cm 3+ and Eu 3+ , the residual concentration of CyMe 4 BTBP and CyMe 4 BTPhen in solution, and the formation of radiolysis products were studied as a function of absorbed gamma dose and presence of an acidic aqueous phase during irradiation. Quantitative and semi-quantitative analyses were used to elucidate the radiolysis mechanism for both ligands. Addition products of alpha-hydroxyoctyl radicals formed through radiolysis of the 1-octanol diluent to the ligand molecules were identified as the predominant radiolysis products. These addition products also extract trivalent metal ions, as distribution ratios remained high although the parent molecule concentrations decreased. Therefore, the utilization time of a solvent using these extractants under the harsh conditions of used nuclear fuel treatment could be considerably longer than expected. Understanding the radiolysis mechanism is crucial for designing more radiation resistant extractants.

99 GENERAL AND MISCELLANEOUS↗

An Advanced TALSPEAK Concept Using 2-Ethylhexylphosphonic Acid Mono-2-Ethylhexyl Ester as the Extractant

A method for separating the trivalent actinides and lanthanides is being developed using 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) as the extractant. The method is based on the preferential binding of the actinides in the aqueous phase by N-(2-hydroxyethyl)ethylenediamine-N,N',N'-triacetic acid (HEDTA), which serves to keep the actinides in the aqueous phase while the lanthanides are extracted into an organic phase containing HEH[EHP]. The process is very robust, showing little dependence upon the pH or the HEH[EHP], HEDTA, and citrate concentrations over the ranges that might be expected in a nuclear fuel recycling plant. Single-stage runs with a 2-cm centrifugal contactor indicate that modifications to the process chemistry may be needed to increase the extraction rate for Sm, Eu, and Gd. The hydraulic properties of the system are favorable to application in centrifugal contactors.

actinide separation↗

Experimental Findings on Minor Actinide and Lanthanide Separations using Ion Exchange

During FY14, experimental work focused in the following areas: (1) synthesis, characterization and testing of ion-exchange materials and (2) investigating methods to oxidize americium(III) in dilute nitric acid using peroxydisulfate. Ion-exchange materials tested at SRNL included antimony silicates. Inorganic and hybrid ion-exchange materials tested previously in this project are limited to a pH of about 2. In more concentrated acid solutions, the ion-exchange material is chemically unstable or exhibits poor ion-exchange performance for metal ions. FY14 research focused on testing antimony silicates, which had been reported to exhibit good ion-exchange in 0.2 – 1.0 M nitric acid and some ion-exchange capacity in as high as 3 M nitric acid. Performance testing of archived antimony silicate samples from Prof. R. Harjula (U. Helsinki) and freshly prepared samples showed very low affinity for lanthanide ions in 0.1, 1.0 and 3.0 M nitric acid. Tests carried out in FY14 continued work initiated the previous year to understand the effects that Pu(IV) and nitrite have on the oxidation of Am(III) by peroxydisulfate. Findings indicate that both Pu(IV) and nitrite are oxidized by peroxydisulfate. Consequently, an excess of peroxydisulfate is needed to maximize the conversion of Am(III) to Am(V).

Hobbs, D. T.↗

Summary of ALSEP Test Loop Solvent Irradiation Testing

Separating the minor actinide elements (americium and curium) from the fission product lanthanides is an important step in closing the nuclear fuel cycle. Isolating the minor actinides will allow transmuting them to short lived or stable isotopes in fast reactors, thereby reducing the long-term hazard associated with these elements. The Actinide Lanthanide Separation Process (ALSEP) is being developed by the DOE-NE Material Recovery and Waste Form Development Campaign to accomplish this separation with a single process. To develop a fundamental understanding of the solvent degradation mechanisms for the ALSEP Process, testing was performed in the INL Radiolysis/Hydrolysis Test Loop for the extraction section of the ALSEP flowsheet. This work culminated in the completion of the level two milestone (M2FT-16IN030102021) "Complete ALSEP test loop solvent irradiation test.” This report summarizes the testing performed and the impact of radiation on the ALSEP Process performance as a function of dose.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Selective Separation of Trivalent Actinides from Lanthanides by Aqueous Processing with Introduction of Soft Donor Atoms

With increased application of MOX fuels and longer burnup times for conventional fuels, higher concentrations of the transplutonium actinides Am and Cm (and even heavier species like Bk and Cf) will be produced. The half-lives of the Am isotopes are significantly longer than those of the most important long-lived, high specific activity lanthanides or the most common Cm, Bk and Cf isotopes, thus the greatest concern as regards long-term radiotoxicity. With the removal and transmutation of Am isotopes, radiation levels of high level wastes are reduced to near uranium mineral levels within less than 1000 years as opposed to the time-fram if they remain in the wastes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Trivalent actinide and lanthanide separations using tetraalkyldiglycolamides (TCnDGA) in molecular and ionic liquid diluents

The use of the diglycolamide, tetrabutyldiglycolamide was investigated for intergroup separations of the lanthanides, focusing especially on those lanthanides (Y, Ce, Eu, Tb, Dy, Er, and Yb) found in lighting phosphors. Tetrabutyldiglycolamide extraction efficiency for the lanthanides varied depending on whether the diluent was the conventional molecular diluent 1-octanol, the ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)-imide, or a mixture of the two. This was attributed to extraction of either neutral, cationic or anionic lanthanide metal complexes with nitrate ion. Based on the batch contact solvent extraction results measured here, a series of extractions providing product streams containing separated Y, Ce, Eu, Tb/Dy, and Er/Yb are proposed.

diglycolamides↗

Overview of reductants utilized in nuclear fuel reprocessing/recycling

Most of the aqueous processes developed, or under consideration worldwide for the recycling of used nuclear fuel (UNF) utilize the oxido-reduction properties of actinides to separate them from other radionuclides. Generally, after acid dissolution of the UNF, (essentially in nitric acid solution), actinides are separated from the raffinate by liquid-liquid extraction using specific solvents, associated along the process, with a particular reductant that will allow the separation to occur. For example, the industrial PUREX process utilizes hydroxylamine as a plutonium reductant. Hydroxylamine has numerous advantages: not only does it have the proper attributes to reduce Pu(IV) to Pu(III), but it is also a non-metallic chemical that is readily decomposed to innocuous products by heating. However, it has been observed that the presence of high nitric acid concentrations or impurities (such as metal ions) in hydroxylamine solutions increase the likelihood of the initiation of an autocatalytic reaction. Recently there has been some interest in the application of simple hydrophilic hydroxamic ligands such as acetohydroxamic acid (AHA) for the stripping of tetravalent actinides in the UREX process flowsheet. This approach is based on the high coordinating ability of hydroxamic acids with tetravalent actinides (Np and Pu) compared with hexavalent uranium. Thus, the use of AHA offers a route for controlling neptunium and plutonium in the UREX process by complexant based stripping of Np(IV) and Pu(IV) from the TBP solvent phase, while U(VI) ions are not affected by AHA and remain solvated in the TBP phase. In the European GANEX process, AHA is also used to form hydrophilic complexes with actinides and strip them from the organic phase into nitric acid. However, AHA does not decompose completely when treated with nitric acid and hampers nitric acid recycling. In lieu of using AHA in the UREX + process, formohydroxamic acid (FHA), although not commercially available, hold promises as a replacement for AHA. FHA undergoes hydrolysis to formic acid which is volatile, thus allowing the recycling of nitric acid. Unfortunately, FHA powder was not stable in the experiments we ran in our laboratory. In addition, AHA and FHA also decompose to hydroxylamine which may undergo an autocatalytic reaction. Other reductants are available and could be extremely useful for actinides separation. The review presents the current plutonium reductants used in used nuclear fuel reprocessing and will introduce innovative and novel reductants that could become reducers for future research on UNF separation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Supercritical Fluid Extraction and Separation of Uranium from Other Actinides

This paper investigates the feasibility of separating uranium from other actinides by using supercritical fluid carbon dioxide (sc-CO2) as a solvent modified with tri-n-butylphosphate (TBP) for the development of an extraction and counter current stripping technique, which would be a more efficient and environmentally benign technology for used nuclear fuel reprocessing compared to traditional solvent extraction. Several actinides (U(VI), Np(VI), Pu(IV), and Am(III)) were extracted in sc-CO2 modified with TBP over a range of nitric acid concentrations and then the actinides were exposed to reducing and complexing agents to suppress their extractability. According to this study, the separation of uranium from plutonium in sc-CO2 modified with TBP was successful at nitric acid concentrations of less than 3 M in the presence of acetohydroxamic acid or oxalic acid, and the separation of uranium from neptunium was successful at nitric acid concentrations of less than 1 M in the presence of acetohydroxamic acid, oxalic acid, or sodium nitrite.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Extraction and reductive stripping of pertechnetate from spent nuclear fuel waste streams.

An approach directed at rapid sequestration and disposal of technetium-99 from UREX (uranium extraction) liquid waste streams is presented. This stream is generated during reprocessing of light-water-reactor spent fuel to recycle the actinides and separate fission products for waste disposal. U and Tc are co-extracted from a nitric acid solution using tri-n-butylphosphate in dodecane, so that Tc(VII) is present in the strip solution after the actinide separations. The goal is to separate uranyl from the pertechnetate in this U-Tc stream and then sequester Tc in the metallic form. Our approach is based on reductive stripping of pertechnetate either from aqueous solution (for column extractions) or organic solvents (for liquid-liquid extractions). In both of these methods, metallic zinc in the presence of formic acid serves as a reducing agent, and {sup 99}Tc is recovered as a co-precipitate of Zn(II) hydroxide and hydrous Tc(IV) oxide, with a Zn:Tc ratio between 1:1 and 2:1 mol/mol. This solid residue can be reduced to a Zn-Tc alloy by high temperature (500-700 C) hydrogenation, and the resulting heterophase alloy can be added to a metallic Fe-Zr-Mo waste form that is processed at 1600 C, with subsequent loss of Zn by evaporation. Alternatively, Zn and Tc can be separated and {sup 99}Tc sequestered as NH{sub 4}TcO{sub 4} for further reduction to Tc(0) metal. The aqueous Zn reduction process removes {approx}90% of {sup 99}Tc per cycle. The nonaqueous Zn reduction in 1:1 methanol-formic acid removes 60-70% of {sup 99}Tc per cycle, depending on the extracting agent (such as a tetraalkylammonium nitrate). The extracting agent is recycled in the process. The pertechnetate is extracted from the aqueous phase into 1,2-dichloroethane, which is removed by evaporation and reused. The residue is either calcined and steam reformed to Tc(0) or processed by the nonaqueous Zn reduction method. These methods can be used not only to remove the pertechnetate from the U-Tc product stream, but also to sequester the pertechnetate from aqueous waste streams generated through the processes described in this paper, thereby closing the cycle. The same approaches can be used to close the {sup 99}Tc cycle for other methods that are currently being developed at Los Alamos and Argonne National Laboratories.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Mixed Metal Phosphonate- Phosphate Resins for Separation of Lanthanides from Actinides

As indicated in the previous annual report the goals of this project are to develop procedures for efficient separation of lanthanides from actinides and curium from americium. These processes are required for the nuclear fuel cycle to minimize the waste and recover the valuable actinides. The basis for our study is that we have prepared a group of compounds that are porous and favor the uptake of ions with charges 3+ and 4+ over ions of lesser charge. The general formula for these materials is M(O 3 PC 6 H 4 PO 3 ) 1-x/2 (APO 4 )x·nH 2 O: where M=Zr 4+ , Sn 4+ , A=H, Na, or K and X=O, 0.5, 0.8, 1.0, 1.33 and 1.61-3. One of our tasks is to determine which members of this group of compounds are effective in carrying out the required separations. A difficulty in obtaining this required information is that the compounds are amorphous. That is they are not crystalline, therefore we need to resort to synchrotron data to obtain structural data which will be presented in detail. This information will be provided as a separate section.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystalline Ceramic Waste Forms: Reference Formulation Report

The research conducted in this work package is aimed at taking advantage of the long term thermodynamic stability of crystalline ceramics to create more durable waste forms (as compared to high level waste glass) in order to reduce the reliance on engineered and natural barrier systems. Durable ceramic waste forms that incorporate a wide range of radionuclides have the potential to broaden the available disposal options and to lower the storage and disposal costs associated with advanced fuel cycles. Assemblages of several titanate phases have been successfully demonstrated to incorporate radioactive waste elements, and the multiphase nature of these materials allows them to accommodate variation in the waste composition. Recent work has shown that they can be successfully produced from a melting and crystallization process. The objective of this report is to explain the design of ceramic host systems culminating in a reference ceramic formulation for use in subsequent studies on process optimization and melt property data assessment in support of FY13 melter demonstration testing. The waste stream used as the basis for the development and testing is a combination of the projected Cs/Sr separated stream, the Trivalent Actinide - Lanthanide Separation by Phosphorous reagent Extraction from Aqueous Komplexes (TALSPEAK) waste stream consisting of lanthanide fission products, the transition metal fission product waste stream resulting from the transuranic extraction (TRUEX) process, and a high molybdenum concentration with relatively low noble metal concentrations. In addition to the combined CS/LN/TM High Mo waste stream, variants without Mo and without Mo and Zr were also evaluated. Based on the results of fabricating and characterizing several simulated ceramic waste forms, two reference ceramic waste form compositions are recommended in this report. The first composition targets the CS/LN/TM combined waste stream with and without Mo. The second composition targets with CS/LN/TM combined waste stream with Mo and Zr removed. Waste streams that contain Mo must be produced in reducing environments to avoid Cs-Mo oxide phase formation. Waste streams without Mo have the ability to be melt processed in air. A path forward for further optimizing the processing steps needed to form the targeted phase assemblages is outlined in this report. Processing modifications including melting in a reducing atmosphere, and controlled heat treatment schedules are anticipated to improve the targeted elemental partitioning.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Crystalline Ceramic Waste Forms: Report Detailing Data Collection In Support Of Potential FY13 Pilot Scale Melter Test

The research conducted in this work package is aimed at taking advantage of the long term thermodynamic stability of crystalline ceramics to create more durable waste forms (as compared to high level waste glass) in order to reduce the reliance on engineered and natural barrier systems. Durable ceramic waste forms that incorporate a wide range of radionuclides have the potential to broaden the available disposal options and to lower the storage and disposal costs associated with advanced fuel cycles. Assemblages of several titanate phases have been successfully demonstrated to incorporate radioactive waste elements, and the multiphase nature of these materials allows them to accommodate variation in the waste composition. Recent work has shown that they can be successfully produced from a melting and crystallization process. The objective of this report is to summarize the data collection in support of future melter demonstration testing for crystalline ceramic waste forms. The waste stream used as the basis for the development and testing is a combination of the projected Cs/Sr separated stream, the Trivalent Actinide - Lanthanide Separation by Phosphorous reagent Extraction from Aqueous Komplexes (TALSPEAK) waste stream consisting of lanthanide fission products, the transition metal fission product waste stream resulting from the transuranic extraction (TRUEX) process, and a high molybdenum concentration with relatively low noble metal concentrations. The principal difficulties encountered during processing of the “reference ceramic” waste form by a melt and crystallization process were the incomplete incorporation of Cs into the hollandite phase and the presence of secondary Cs-Mo non-durable phases. In the single phase hollandite system, these issues were addressed in this study by refining the compositions to include Cr as a transition metal element and the use of Ti/TiO 2 buffer to maintain reducing conditions. Initial viscosity studies of ceramic waste forms indicated that the pour spout must be maintained above 1400°C to avoid flow blockages due to crystallization. In-situ electron irradiations simulate radiolysis effects indicated hollandite undergoes a crystalline to amorphous transition after a radiation dose of 10 13 Gy which corresponds to approximately 1000 years at anticipated doses (2 10 10 -2 10 11 Gy). Dual-beam ion irradiations employing light ion beam (such as 5 MeV alpha) and heavy ion beam (such as 100 keV Kr) studies indicate that reference ceramic waste forms are radiation tolerant to the α-particles and β-particles, but are susceptible to a crystalline to amorphous transition under recoil nuclei effects. A path forward for refining the processing steps needed to form the targeted phase assemblages is outlined in this report. Processing modifications including melting in a reducing atmosphere with the use of Ti/TiO 2 buffers, and the addition of Cr to the transition metal additives to facilitate Cs-incorporation in the hollandite phase. In addition to melt processing, alternative fabrication routes are being considered including Spark Plasma Sintering (SPS) and Hot Isostatic Pressing (HIP).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗