Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Zoom”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Soil Water Retention and Hydraulic Conductivity Data and Model at Snodgrass Mountain in East River Watershed, Colorado 2020-2025

This data package includes soil water retention and hydraulic conductivity data and model fitting results from measurements of ex-situ soil samples and in-situ soil sensors at Snodgrass Mountain. Soil water retention curves (SWRC) characterize soil water content as a function of soil water potential. SWRC depends on soil texture and pore structure and can be used to describe the constraints on biogeochemical processes in terms of soil water availability. In this data package, the sample identification follows the format SG-X-Y, where SG refers to Snodgrass Mountain, X is the location identifier, and Y is the depth identifier at the same X (shallow Y=1). Specifically, SG-EHS is associated with ecohydrology sites under the East-Taylor Watershed Community Observatory Sites directory, and SG-ERTn (upslope n=1) are points along the Snodgrass electrical resistivity tomography transect not associated with the existing site names in the directory. The sample and location information can be found in metadata.csv. Sampling and Measurements Each sample falls into one of the three sampling methods – (1) intact cores, (2) repacked samples, or (3) soil sensors – and one of the two measurement methods – (a) laboratory or (b) in-situ. Both intact cores and repacked samples were measured using the laboratory methods, which include measurements of soil water potential (HYPROP & WP4C, METER), saturated (KSAT, METER) and unsaturated hydraulic conductivity (HYPROP). The in-situ method uses a pair of co-located soil sensors to measure volumetric water content (TEROS12, METER) and soil water potential (TEROS21, METER), and the hydraulic conductivity was not measured. In comparison, the laboratory methods progress from full saturation to dry conditions, and the in-situ method includes both dry-to-wet and wet-to-dry cycles. The sampling and measurement methods for each sample can be found in metadata.csv, and more information about the measurements is detailed in the Methods section below. Models Retention and hydraulic conductivity data were fitted with four van-Genuchten-type models (specified by “model_name” column in the files): (1) traditional constrained van Genuchten model (“vG_constrained”), (2) traditional unconstrained van Genuchten model (“vG_unconstrained”), (3) PDI-variant of the constrained van Genuchten model (“vG_constrained_PDI”), and (4) PDI-variant of the unconstrained van Genuchten model (“vG_unconstrained_PDI”). The difference between the constrained (1: n) and the unconstrained (2: n, m) van Genuchten models is the number of pore-size distribution parameters in the model equations, giving the unconstrained model more degrees of freedom when fitting the data. Between the traditional and the PDI-variant models, model fitting differs the most at the dry end of the measurements. The traditional models allow infinite suction at the residual water content (water content does not drop below residual water content), and the PDI-variant models enforce a soil water potential value of pF=6.8 (~ -630 MPa) at oven-dryness (water content reaches 0). The inclusion of the van-Genuchten-type models is due to their common application. If other retention models are required, users can access the data in data.csv for further data fitting. More information about the models can be found in the Methods section below. Fitting Tasks The model fitting can be categorized into three levels of tasks (specified by “fitting_task” column in the files). Level 1 (“fit_retention”) only includes retention data fitting (the only level available for the in-situ method). Level 2 (“fit_retention_conductivity”) includes both retention and hydraulic conductivity data fitting, and the saturated hydraulic conductivity (Ks, a parameter of the hydraulic conductivity functions) is fixed by the measurements from KSAT. Level 3 (“fit_retention_conductivity_Ks”) also includes both retention and hydraulic conductivity data fitting, but Ks is a fitted parameter without the constraints from KSAT measurements. Among the same retention models (e.g. vG_constrained models of the same sample), level 1 should produce the best retention data fitting. Level 2 should have the highest misfit of the retention and hydraulic conductivity data, because the retention and hydraulic conductivity functions share common model parameters, and the unsaturated hydraulic conductivity (HYPROP) data fitting is subject to Ks measured independently by KSAT. Level 3 should have mid-level misfits of the retention and hydraulic conductivity data. While level 3 fits the hydraulic conductivity data better than level 2, the fitted Ks value might be unreasonable due to the lack of constraints at the wet end of the measurements. General recommendation when using this data package: (1) Choice of sampling methods: Intact cores and in-situ soil sensors could be prioritized because these sampling methods are less destructive. While the repacked samples were packed to the target bulk density (estimated post-sampling, when sample volume was known), these samples had altered pore structures. Nevertheless, intact cores might suffer from sample gaps that would lead to overestimation of Ks (sample gaps can be inferred from the “soil_sample_volume” column in metadata.csv when the value is < 249). In-situ method also has higher uncertainty in characterizing the wet end of the SWRC because of sensor limitations and the difficulty in reaching full saturation under natural conditions. (2) Choice of fitting tasks: When only retention data is needed, level 1 (“fit_retention”) should be prioritized. When both retention and hydraulic conductivity data are needed, level 2 (“fit_retention_conductivity”) could be prioritized. (3) Choice of models: This could depend on what the downstream models call for. If no specific model is required, model misfit could be used as a ranking criterion. Model misfit values in terms of RMSE can be found in model_parameters.csv. The following files are included in this data package: (1) metadata.csv – This file includes the general information of each sample, including location (description, geocoordinates, elevation), sampling and measurements details (method, depth, time or period, volume, instruments), and soil physical properties (bulk density, saturated hydraulic conductivity, only applicable to physical soil samples). (2) data.csv – This file includes soil water potential, volumetric water content, and unsaturated hydraulic conductivity data of each sample. Column “instrument” specifies the instrument (HYPROP, WP4C, or TEROS) used to perform the measurements. (3) model_fit.csv – This file includes soil water potential, volumetric water content, and unsaturated hydraulic conductivity fitted from the four models and three fitting tasks. Column “model_name” specifies the retention model used, and “fitting_task” specifies the level of data fitting. Missing values indicate that the variable does not apply to that fitting task. (4) model_parameters.csv – This file includes the fitted model parameters, model misfits, and conventional water content thresholds (field capacity and wilting point) from the four models and three fitting tasks. Column “model_name” specifies the retention model used, and “fitting_task” specifies the level of data fitting. Missing values indicate that the parameter does not apply to that model and/or that fitting task. (5) data_Ks.csv – This file includes the saturated hydraulic conductivity measurements from KSAT. (6) /figure/*.png – This folder includes three quick visualizations of the data, retention model fitting results and misfits, and hydraulic conductivity model fitting results, misfits, and parameters. The model fitting results are separated by samples and fitting tasks and colored by models. Zoom-in required. (7) /hyprop/*.bdhx – This folder includes proprietary hyprop files that require the free Labros SoilView-Analysis (METER) to open. Users can explore data fitting using other retention models (i.e. Brooks-Corey, Fredlund-Xing, Kosugi, bimodal models). Be aware that Ks value is pre-entered under “Fitting tab, Conductivity functions parameters” for level 2 fitting. If the value is lost, please refer to metadata.csv under “Ks” column. (8) Six file-level metadata that summarize file, header, column, and variable information of all files. This work was supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231.

EARTH SCIENCE > LAND SURFACE > SOILS↗
DOE OSTI2024

2024 Water Splitting Technologies Benchmarking and Protocols Workshop

The sixth annual Advanced Water Splitting Pathways Benchmarking meeting was held on June 11-12, 2024 at the Arizona State University California Center- Los Angeles, CA. A total of 117 people participated (102 in person and 15 via Zoom). Attendance at most breakout sessions ranged from 10 - 25 attendees. The focus of many of the sessions was on developing plans to validate protocols written to date, defining future protocols to be written and aligning with international efforts. The plenary session provided perspectives on international activities in each technology area, as well as an overview of the ARCHES Hydrogen Hub.

08 HYDROGEN↗
DOE OSTI2022

Light-Level Geolocation of the LANL Population of Western Bluebirds

Options for tracking and reconstructing animal movement are increasingly accessible due to rapidly decreasing costs, smaller sizes, and a proliferation of analytical inference techniques (Rutz and Hays, 2009; Wikelski et al., 2007). A wide variety of options exists for determining movement patterns of animals—from high-resolution pinpoint ARGOS satellite tags to time-consuming and logistically challenging radio telemetry. One option, light-level geolocation, offers small, affordable devices with long battery lives known as global location sensors (GLS), making them ideal for gathering preliminary migratory data. Geolocation works by inferring patterns of animal movement from light-level transitions between day and night (Hill and Braun, 2001). The recent advances in tracking technologies allow biologists to zoom in on migratory behavior, delineating heretofore-unidentified intraspecific migratory behavior (Delmore et al., 2012). The ubiquity of migratory divides (populations within a species that exhibit different migratory patterns) remains largely unknown, but their existence can lead to favorable demographic metrics (e.g., genetic diversity) in conservation contexts (Møller et al., 2011) and necessitate the development of population-specific conservation plans (Delmore et al., 2012). Delimiting the populations within a species that migrate and the extent of their migrations relative to individuals that remain resident across a species’ range has important evolutionary, ecological, and conservation implications. Within this context, Los Alamos National Laboratory (LANL) biologists have leveraged the local Avian Nestbox Network (ANN; Fair and Myers, 2002) to evaluate the migratory behaviors of a common local bird species, the Western Bluebird (Sialia mexicana).

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Safeguards by Design Projects (Final Report-FY-22)

This University Engagement project challenged engineering students at universities, that do not have Bachelor degree programs in nuclear engineering but do have research reactors and some nuclear engineering coursework, to incorporate Safeguards by Design concepts into their Senior Capstone Design Project. This University Engagement project was part of the U. S. Department of Energy’s (DOE) National Nuclear Security Administration (NNSA), Office of Defense Nuclear Nonproliferation, Office of International Nuclear Safeguards, Next Generation Safeguards Initiative (NGSI), Human Capital Development (HCD): University Engagement Program. This program exposed university students with Mechanical Engineering majors and Nuclear Engineering minors to the concepts of international nuclear safeguards. In FY22, three teams at the University of Rhode Island and two teams at the University of Texas - Austin participated in researching, designing, building, and testing projects to support international nuclear safeguards measurements or verification. The projects involved engaging in activities at the university’s research reactors. All the projects engaged students with prototyping a design and/or tool for application at the Universities’ reactor. At the end of the course, most of the students expressed the experience was positive and they learned more about international nuclear safeguards and applying requirements than they had previously encountered. This school year the projects were further complicated by the COVID-19 pandemic. Both universities had limited in classes on campus, still relying on Zoom classes, and limited direct student/professor interactions. Furthermore, Los Alamos National Laboratory (LANL) greatly restricted travel, therefore making it impossible to visit the students at the end of the semester for the review of their design projects. The final design and review meeting for the projects happened via meetings over the internet. Additionally, the teams did build and test some prototypes but could only do so in a limited capacity.

42 ENGINEERING↗
DOE OSTI2020

Automated, Unmanned Detection and Quantification of Fugitive Methane Emissions

Compressor stations used to move natural gas are one of the largest sources of fugitive methane emissions in the midstream sector, accounting for approximately 50% of all fugitive emissions (Zimmerle et al., 2015). This problem is most widespread at reciprocating compressors (Subramanian et al., 2015) where faulty seals are a key contributor to methane emissions (Johnson et al., 2015). As such, there is a significant need for a robust technology that could provide an early indication of an unexpected emission. Equally important, the technology needs to be able to account for biogenic versus anthropogenic sources of methane. One means of indirectly making this determination, is to leverage optical technologies that can autonomously pinpoint the source of such leaks. This presentation discusses recent work funded by the U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL), focused on the development of an innovative remote sensing technology that can reliably and autonomously detect fugitive methane emissions in near real-time, using computer vision and deep learning. The technology called the Smart Methane Leak Detection (SLED/M) system was initially developed to monitor facilities such as compressor stations in a stationary, pan-tilt-zoom configuration. The system has recently been adapted to monitor facilities from an unmanned aerial system (UAS). The speed and maneuverability of UAS platforms are attractive to leak detection and repair program operators, but introduce several challenges. Many existing methane detection algorithms rely on mostly static backgrounds becoming unusable with motion. In addition, top-down views of fugitive methane emissions present differently in Optical Gas Imagers (OGI) compared to looking across the plume. Our work has focused on overcoming these challenges, enhancing the operators ability to detect methane emissions, and pinpoint their sources. Another recent adaptation to SLED/M is the ability to quantify methane emissions using passive sensors (OGI, thermal camera), environmental conditions, plume modeling, and deep learning. SLED/M advances the state-of-the-art for methane emission detection and quantification by focusing on three key critical criteria for effective methane emission mitigation: (1) autonomy (no need for a human to be in the loop), (2) high reliability (low false alarm rates), and (3) real-time performance. Results from this work will be presented.

03 NATURAL GAS↗
DOE OSTI2023

Synthesis and Observation of Emergent Phenomena in Epitaxial Heusler Compound Heterostructures

The proposal was on the synthesis and observation of emergent phenomena in epitaxial Heusler compound heterostructures. The large range of properties and number of Heusler compounds opens up a wide number of potential compounds that will exhibit emergent phenomena. The similarity, large range of relatively inexpensive, large area, high crystal quality, III-V bulk substrates, lattice parameters and the ability to tune the lattice parameters through ternary or quaternary III-V compound semiconductor epitaxial growth, makes III-V semiconductors an ideal choice for substrates for epitaxial growth of Heusler compounds. A number of half Heusler compounds have been predicted to exhibit band inversion, making them topological and are therefore expected to exhibit spin-momentum locked topological surface states with linear dispersion. Others are predicted to be semimetals with Weyl points and others semiconducting and magnetic. During the course of this grant, emphasis has been on investigating Heusler compounds with emergent phenomena and demonstrating the ability to tune their properties through alloying and strain. We have grown toplogical semimetal (PtLuSb, PtMnBi), Weyl (Co 2 MnAl, Co 2 TiGe), half metal (PtMnSb, Co 2 MnSi, Co 2 MnAl x Si 1-x , Co2FeAl), and semiconducting (CoTiSb, NiTiSn) and tuned their properties through alloying and epitaxial strain. We also investigated the closely related materials of rare-earth monopnictide, some of which have also been predicted to be topological. During the attempts to grow the PtMnBi, it was discovered that Bi, another predicted topological material when ultrathin, could be grown epitaxially on InSb, results for which are also reported here. The main focus for this effort has been on using variable photon energy and spin-dependent angle resolved photoemission (ARPES) to determine bulk band structure and surface states of pristine epitaxial films grown on III-V semiconductor and MgO substrates and correlate results with theory and transport measurements. Theory has been critical to interpretation of experimental results and has been essential in guiding experiments. The research benefited from several strong collaborations between the PIs and the beamline scientists at the Advanced Light Source at Lawrence Berkeley Laboratory, the Stanford Linear Accelerator Center (SLAC) at Stanford and at the Max Lab at Lund University in Sweden. The strong experiment - theory collaboration between the PI’s groups, the Palmstrøm group at UCSB and the Janotti group at the University of Delaware, has been critical for interpreting the experimental ARPES and magnetotransport measurements results and making predictions to guide experiments. Weekly interactive Zoom meetings made this work well. A collaboration between the Palmstrøm group and Dr. Alexei Fedorov at the Advanced Light Source (ALS) resulted in significant modifications to his end chamber to accommodate the vacuum suitcase that was designed and constructed in the Palmstrøm group at UCSB. In collaboration with beamline scientists, Drs. Makoto Hashimoto and Donghui Lu at SLAC, Palmstrøm made modifications to the vacuum suitcase and developed special sample holders that allowed samples to be grown in the Palmstrøm MBE systems at UCSB and transported in the UHV vacuum suitcase to SLAC for ARPES measurements. The development of the vacuum suitcase was essential for this grant as it has allowed variable photon energies to be used to identify surface versus bulk states on samples that could not be capped and decapped using As- or Sb-capping layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

A Novel Spatio-Temporal Regime Tracking Method for Impact Simulations

In this proposal, we present a novel method of tracking the rheological regimes activated during impact cratering events that will allow researchers to gain new insights into cratering mechanics. Rheology describes the stress-strain response of rocks to different conditions. Planetary impact cratering events often occur on too large of a scale to be feasibly captured in controlled experiments. Instead, these dynamic events are primarily studied using multi-physics codes equipped with complex material models that enable calculations of the impact event at scale. However, determining which physical processes are required for the problem of interest is challenging. Because the dominant rheological regimes change with space and time during crater formation, it is difficult to link numerical simulations with observable features of craters at the end of the event. The basis of this work is the implementation of numerical flags that track the activation of each rheological regime throughout impact simulations. We demonstrate this with the ‘Rock Model’ implemented in the CTH shock-physics code. We will use this rheology tracking method to ’zoom in’ on a specific region within an event and track the conditions the rock experiences over time. This work will develop community benchmarks to validate and distribute our implemented rheological models. We will focus on improving the melt models used by the planetary impact modeling community by developing an EOS-aware rheological transition from solid to melt. Through analysis of cell and tracer-particle based tracking data, we will study the effects of different rheologies on modeled outcomes, particularly on the volume and distributions of impacts melts. We will also use this method to link observable features with the rheological mechanisms responsible for them. The deliverables (peer-reviewed papers) from the proposed work are (i) tests of the implemented rheologic processes and demonstrations of the tracking flags; (ii) the first calculations of the spatio-temporal evolution of the dominant rheologies during impact cratering events; and (iii) application to delivery of impactor iron during basin-scale impacts.

58 GEOSCIENCES↗
DOE OSTI2022

APS-DPP Distinguished Lecturer in Plasma Physics (DLPP) Program (Final Technical Report)

The final WVU-DLPP-project year has been a transition year on multiple fronts for the DLPP program. The first is a transition from the mode of operations adopted during the COVID-19 pandemic and the second is leadership for the program. During the pandemic, the lecture series went to a virtual format to maintain interactions between our distinguished lecturers and the community of small college and University plasma physics programs with an emphasis on underrepresented groups. Prof. John Foster was especially active with his invited lectures in the remote modality of the DLPPseries. While efforts included zoom calls for speakers to interact with students in addition to the seminar, this approach is much less impactful than face-to-face interactions. As we refresh the group of speakers, the lectures will move back to in person visits. We still retain the virtual option for our lecturers to cope with circumstances and remaining health concerns for individual. We have selected a new cohort of distinguished lecturers. A flyer was sent to a list of college and universities to advertise the DLPP speaker-visit opportunity. We have also drafted a thank you letter to the previous cohort who sustained the program through the pandemic. The other transition is the change in leadership, after the selection of the 2023 DLPPcohort, from Dr. Koepke who has been a staunch champion for the program and done a great job growing its presence, to Dr. Kline the co-chair. Dr. Koepke has been transferring his knowledge and providing excellent guidance in this transition. Over the past year, a best practices document was written as a means to capture not only the core program values, but create a living document that can maintain a continual transfer of information to subsequent leader for the program.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Decision and Control of Complex Systems – A Data-Drive Framework

During the project period, we have collaborated with other team members and developed novel algorithms for novelty detection, continual learning, and graph learning algorithms for dynamic systems. The results are documented in publications and meeting notes. Moreover, we leverage virtual collaboration tools (such as Basecamp, Microsoft Teams and Zoom) for technical exchanges. Our research on novelty detection was published at AAAI 2022 and Lecture Notes in Artificial Intelligence, Springer Nature. The newly developed algorithms were successfully applied to realistic cases, including thermal data from buildings at Pacific Northwest National Lab and microelectronic data provided by GlobalFoundries. Multiple publications have been produced from this project, in collaboration with other team members. Three PhD students were supported in this project to conduct their research.

42 ENGINEERING↗
DOE OSTI2025

Bowtie Manufacturing Images, Round 1&2

This dataset contains over 3,600 image files of images of a semiconductor manufactured part called 'Bowtie'. The data is grouped into 'accept' and 'reject' but does not contain masks for why the inspector rejected a part. There are further groupings such as different zoom magnifications, types of rejection (e.g. gouge, debris, etc.). Some of the parts have been laminated and are organized as such. For the 2nd round of data also included are Excel spreadsheets which can be used to identify position on the wafer where the images came from. The included PDF has example images and explains this in more detail.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Development of Multi-Scale X-ray Fluorescence Tomography for Examination of Nanocomposite-Treated Biological Samples

Research in cancer nanotechnology is entering its third decade, and the need to study interactions between nanomaterials and cells remains urgent. Heterogeneity of nanoparticle uptake by different cells and subcellular compartments represent the greatest obstacles to a full understanding of the entire spectrum of nanomaterials’ effects. In this work, we used flow cytometry to evaluate changes in cell cycle associated with non-targeted nanocomposite uptake by individual cells and cell populations. Analogous single cell and cell population changes in nanocomposite uptake were explored by X-ray fluorescence microscopy (XFM). Very few nanoparticles are visible by optical imaging without labeling, but labeling increases nanoparticle complexity and the risk of modified cellular uptake. XFM can be used to evaluate heterogeneity of nanocomposite uptake by directly imaging the metal atoms present in the metal-oxide nanocomposites under investigation. While XFM mapping has been performed iteratively in 2D with the same sample at different resolutions, this study is the first example of serial tomographic imaging at two different resolutions. A cluster of cells exposed to non-targeted nanocomposites was imaged with a micron-sized beam in 3D. Next, the sample was sectioned for immunohistochemistry as well as a high resolution “zoomed in” X-ray fluorescence (XRF) tomography with 80 nm beam spot size. Multiscale XRF tomography will revolutionize our ability to explore cell-to-cell differences in nanomaterial uptake.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

A Study of the Properties and Dynamics of the Disk of Satellites in a Milky-Way-like Galaxy System

The dynamics of the satellite systems of Milky-Way-like galaxies offer a useful means by which to study the galaxy formation process in the cosmological context. It has been suggested that the currently observed anisotropic distribution of the satellites in such galaxy systems is inconsistent with the concordance ΛCDM cosmology model on the galactic scale if the observed satellites are random samples of the dark matter (DM) sub-halos that are nearly isotropically distributed around the central galaxy. In this study, we present original high-resolution zoom-in studies of central galaxies and satellite systems based upon initial conditions for the DM distribution from the Aquarius simulations but with substantial high-resolution baryon physics added. We find that the galaxy most like the Milky Way in this study does indeed contain a disk of satellites (DOS). Although one galaxy DOS system does not answer the question of how common such disks are, it does allow the opportunity to explore the properties and dynamics of the DOS system. Our investigation centers on the spatial arrangement (distances, angles, etc.) of satellites in this Milky-Way-like galaxy system with a specific emphasis on identifying and analyzing the disk-like structure along with its dynamical and morphological properties. Among the conclusions from this study, we find that the satellites and DM sub-halos in the galaxy simulations are anisotropically distributed. The dynamical properties of the satellites, however, indicate that the direction of the angular momentum vector of the whole satellite system is different from the normal direction of the fitted DOS and from the normal direction of the velocity dispersion of the system. Hence, the fitted DOS appears to be comprised of infalling sub-halos and is not a rotationally supported system.

Zhao, Xinghai↗
DOE OSTI2020

Signatures of Velocity-dependent Dark Matter Self-interactions in Milky Way-mass Halos

In this work, we explore the impact of elastic, anisotropic, velocity-dependent dark matter (DM) self-interactions on the host halo and subhalos of Milky Way (MW)--mass systems. We consider a generic self-interacting dark matter (SIDM) model parameterized by the masses of a light mediator and the DM particle. The ratio of these masses, w, sets the velocity scale above which momentum transfer due to DM self-interactions becomes inefficient. We perform high-resolution zoom-in simulations of an MW-mass halo for values of w that span scenarios in which self-interactions either between the host and its subhalos or only within subhalos efficiently transfer momentum, and we study the effects of self-interactions on the host halo and on the abundance, radial distribution, orbital dynamics, and density profiles of subhalos in each case. The abundance and properties of surviving subhalos are consistent with being determined primarily by subhalo--host halo interactions. In particular, subhalos on radial orbits in models with larger values of the cross section at the host halo velocity scale are more susceptible to tidal disruption owing to mass loss from ram pressure stripping caused by self-interactions with the host. This mechanism suppresses the abundance of surviving subhalos relative to collisionless DM simulations, with stronger suppression for larger values of w. Thus, probes of subhalo abundance around MW-mass hosts can be used to place upper limits on the self-interaction cross section at velocity scales of ~200 km s-1, and combining these measurements with the orbital properties and internal dynamics of subhalos may break degeneracies among velocity-dependent SIDM models.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

The Signatures of Self-interacting Dark Matter and Subhalo Disruption on Cluster Substructure

The abundance, distribution, and inner structure of satellites of galaxy clusters can be sensitive probes of the properties of dark matter. We run 30 cosmological zoom-in simulations with self-interacting dark matter (SIDM), with a velocity-dependent cross section, to study the properties of subhalos within cluster-mass hosts. We find that the abundance of subhalos that survive in the SIDM simulations are suppressed relative to their cold dark matter (CDM) counterparts. Once the population of disrupted subhalos—which may host orphan galaxies—is taken into account, satellite galaxy populations in CDM and SIDM models can be reconciled. However, even in this case, the inner structures of subhalos are significantly different in the two dark matter models. We study the feasibility of using the weak-lensing signal from the subhalo density profiles to distinguish between the cold and self-interacting dark matter while accounting for the potential contribution of orphan galaxies. We find that the effects of self-interactions on the density profile of subhalos can appear degenerate with subhalo disruption in CDM, when orphans are accounted for. With current error bars from the Subaru Hyper Suprime-Cam Strategic Program, we find that subhalos in the outskirts of clusters (where disruption is less prevalent) can be used to constrain dark matter physics. In the future, the Vera C. Rubin Observatory Legacy Survey of Space and Time will give precise measurements of the weak-lensing profile and can be used to constrain σ $_{T}$/m at the ∼1 cm$^{2}$ g$^{−1}$ level at v ∼ 2000 km s$^{−1}$.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Milky Way Satellite Census. IV. Constraints on Decaying Dark Matter from Observations of Milky Way Satellite Galaxies

Abstract We use a recent census of the Milky Way (MW) satellite galaxy population to constrain the lifetime of particle dark matter (DM). We consider two-body decaying dark matter (DDM) in which a heavy DM particle decays with lifetime τ comparable to the age of the universe to a lighter DM particle (with mass splitting ϵ ) and to a dark radiation species. These decays impart a characteristic “kick velocity,” V kick = ϵ c , on the DM daughter particles, significantly depleting the DM content of low-mass subhalos and making them more susceptible to tidal disruption. We fit the suppression of the present-day DDM subhalo mass function (SHMF) as a function of τ and V kick using a suite of high-resolution zoom-in simulations of MW-mass halos, and we validate this model on new DDM simulations of systems specifically chosen to resemble the MW. We implement our DDM SHMF predictions in a forward model that incorporates inhomogeneities in the spatial distribution and detectability of MW satellites and uncertainties in the mapping between galaxies and DM halos, the properties of the MW system, and the disruption of subhalos by the MW disk using an empirical model for the galaxy–halo connection. By comparing to the observed MW satellite population, we conservatively exclude DDM models with τ < 18 Gyr (29 Gyr) for V kick = 20 kms −1 (40 kms −1 ) at 95% confidence. These constraints are among the most stringent and robust small-scale structure limits on the DM particle lifetime and strongly disfavor DDM models that have been proposed to alleviate the Hubble and S 8 tensions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

The Relationship between Age, Metallicity, and Abundances for Disk Stars in a Simulated Milky Way

Observations of the Milky Way's low-α disk show that several element abundances correlate with age at fixed metallicity, with unique slopes and small scatters around the age–[X/Fe] relations. In this study, we turn to simulations to explore the age–[X/Fe] relations for the elements C, N, O, Mg, Si, S, and Ca that are traced in a FIRE-2 cosmological zoom-in simulation of a Milky Way–like galaxy, m12i, and understand what physical conditions give rise to the observed age–[X/Fe] trends. We first explore the distributions of mono-age populations in their birth and current locations, [Fe/H], and [X/Fe], and find evidence for inside-out radial growth for stars with ages <7 Gyr. We then examine the age–[X/Fe] relations across m12i's disk and find that the direction of the trends agrees with observations, apart from C, O, and Ca, with remarkably small intrinsic scatters, σ int (0.01 - 0.04 dex). This σ int measured in the simulations is also metallicity dependent, with σ int ≈ 0.025 dex at [Fe/H] = -0.25 dex versus σ int ≈ 0.015 dex at [Fe/H] = 0 dex, and a similar metallicity dependence is seen in the GALAH survey for the elements in common. Additionally, we find that σ int is higher in the inner galaxy, where stars are older and formed in less chemically homogeneous environments. The age–[X/Fe] relations and the small scatter around them indicate that simulations capture similar chemical enrichment variance as observed in the Milky Way, arising from stars sharing similar element abundances at a given birth place and time.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Strong Dark Matter Self-interactions Diversify Halo Populations within and surrounding the Milky Way

Abstract We perform a high-resolution cosmological zoom-in simulation of a Milky Way (MW)–like system, which includes a realistic Large Magellanic Cloud analog, using a large differential elastic dark matter self-interaction cross section that reaches ≈100 cm 2 g −1 at relative velocities of ≈10 km s −1 , motivated by the diverse and orbitally dependent central densities of dwarf galaxies within and surrounding the MW. We explore the effects of dark matter self-interactions on satellite, splashback, and isolated halos through their abundance, central densities, maximum circular velocities, orbital parameters, and correlations between these variables. We use an effective constant cross section model to analytically predict the stages of our simulated halos’ gravothermal evolution, demonstrating that deviations from the collisionless R max – V max relation can be used to select deeply core-collapsed halos, where V max is a halo’s maximum circular velocity, and R max is the radius at which it occurs. We predict that a sizable fraction (≈20%) of subhalos with masses down to ≈10 8 M ⊙ is deeply core collapsed in our SIDM model. Core-collapsed systems form ≈10% of the isolated halo population down to the same mass; these isolated, core-collapsed halos would host faint dwarf field galaxies with extremely steep central density profiles. Finally, most halos with masses above ≈10 9 M ⊙ are core-forming in our simulation. Our study thus demonstrates how self-interactions diversify halo populations in an environmentally dependent fashion within and surrounding MW-mass hosts, providing a compelling avenue to address the diverse dark matter distributions of observed dwarf galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Dissipative Dark Substructure: The Consequences of Atomic Dark Matter on Milky Way Analog Subhalos

Using cosmological hydrodynamical zoom-in simulations, we explore the properties of subhalos in Milky Way analogs that contain a subcomponent of atomic dark matter (ADM). ADM differs from cold dark matter (CDM) due to the presence of self-interactions that lead to energy dissipation, analogous to standard model baryons. This model can arise in dark sectors that are natural and theoretically motivated extensions to the standard model. The simulations used in this work were carried out using GIZMO and utilize the FIRE-2 galaxy formation physics in the standard model baryonic sector. For the parameter points we consider, the ADM gas cools efficiently, allowing it to collapse to the center of subhalos. This increases a subhalo's central density and affects its orbit, with more subhalos surviving small pericentric passages. The subset of subhalos that host satellite galaxies have cuspier density profiles and smaller stellar half-mass radii relative to CDM. The entire population of dwarf galaxies produced in the ADM simulations is more compact than those seen in CDM simulations, unable to reproduce the entire diversity of observed dwarf galaxy structures. Additionally, we also identify a population of highly compact subhalos that consist nearly entirely of ADM and form in the central region of the host, where they can leave distinctive imprints in the baryonic disk. This work presents the first detailed exploration of subhalo properties in a strongly dissipative dark matter scenario, providing intuition for how other regions of ADM parameter space, as well as other dark sector models, would impact galactic-scale observables.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗