SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The Alliance for Green Heat hosted the 2018 Wood Stove Design Challenge on the National Mall in Washington DC from Friday, Nov. 9 – Tuesday, November 13. The Design Challenge is a technology competition designed to foster R&D of innovative, next generation wood and pellet stove designs. In 2018, the Challenge focused on two technology goals: automating the wood stove and making electricity from wood or pellet stoves.
Wood pallets are ubiquitous products that can be recovered and reused to enhance their service life and environmental performance. Repair/remanufacturing has an important role in extending the service life of the wood pallet. To quantify environmental performances of wood pallet reuse, this study developed representative life cycle inventory data for pallet repair/remanufacturing in the United States based on comprehensive industry-wide production data for 2018. A gate-to-gate life cycle assessment covering raw material supply, raw material transportation and pallet repair/remanufacturing showed that repair/remanufacturing often had the highest impacts, including primary energy consumption at 5.09 MJ and global warming impact at 0.355 kg CO 2 eq per repaired/remanufactured pallet. Electricity consumed onsite followed by nail input and the fuel used by forklifts during the manufacturing drove much of the impacts on the environment. Finally, the results of this study provide valuable information on the repair/remanufacturing impacts, allowing quantification and evaluation of the recovery stage on the overall environmental performance of wood pallets.
Following life-cycle assessment (LCA) methodology, this study presents a state-level estimation of embodied carbon of wood products harvested in 2019 from California and subsequently processed, manufactured, transported, used, and disposed at the end-of-life (EoL). In a conventional static approach to LCA, all GHG emissions were aggregated and considered to occur at year 0 of the given time horizon (500 years in this study) and used a static characterization factor (CF). In dynamic LCA, GHG emissions occurring in different years were considered, and their global warming impact (GWI) was determined using a time-dependent CF over the selected time horizon of 500 years. Four scenarios were developed to examine the impact of EoL choices on GWI. It was found that dynamic GWI for all scenarios ranged from 0.27 to 0.93 million tonne CO₂e, which were 45–73 % lower than those estimated with static LCA approach, indicating that the static LCA approach could lead to an underestimation of the benefits of substituting wood for non-wood products, compared to those based on dynamic LCA approach. This analysis also demonstrated that the choice of EoL treatment option is a key factor affecting the estimated GWI as it directly determines the annual emission of GHGs released into atmosphere and subsequently their warming effect depending on the time harvested wood products (HWPs) spend in the horizon of assessment. Altogether, the dynamic LCA performed in this study enabled more robust interpretations of embodied carbon by including temporal boundaries associated with the HWPs life cycle.
The utilization of sustainable lignin to synthesize wood adhesives has attracted increasing attention in recent years. However, the facile fabrication of strong and environmentally friendly lignin-based adhesives with a high lignin content remains a significant challenge. In this study, we developed a formaldehyde-free wood adhesive system by combining alkali lignin and poly(propylene glycol) bis(2-aminopropyl ether). The process of producing lignin-based adhesives involves a simple mixing of wood flour, lignin, and a commercially available crosslinker (polyetherimide), followed by direct hot-pressing into particleboards. The lignin-based adhesive showed a high biomass content of 75 wt% (crosslinker accounting for 25 wt%) and the internal bonding strength of the formaldehyde-free and non-toxic particleboards was 1.42 MPa, outperforming many other bio-based adhesives. In conclusion, the study demonstrates a new and facile strategy to synthesize a lignin-based thermoset that is readily and practically applicable as an adhesive to fabricate high-performance, high lignin content, and formaldehyde-free wood products.
This study analyzes the potential resource distribution in global competitive feedstock markets for industrial grade wood pellets. Based on historic trade patterns and expected future production and demand structures, a set of potential buyers and sellers of industrial grade wood pellets are simulated for 2022, 2030, and 2040. In contrast to previous trade modeling efforts, this study assumes a fully competitive market, i.e., excluding long-term contract arrangements, to show resource distributions under a potential future commodity market. This is done via a non-cooperative bi-level Stackelberg leader-follower game model. Of particular interest is the potential impact of international feedstock competition on the availability of US feedstock resources. The model results show that the main destinations for US wood pellet exports typically pay 10-20% more per tonne than the domestic market. The results show that domestic wood pellets are available to US industry at prices higher than the expected $88 per tonne delivered.
Branch samples were collected in July 2023 to measure wood anatomical traits on two dominant conifer species, Picea mariana and Larix laricina, in a bog forest at the SPRUCE (Spruce and Peatland Responses Under Changing Environments) experiment in northern Minnesota. Anatomical measurements were made on the annual rings of those branches with dates ranging from 2011-2023. Wood anatomical measurements include annual tracheid diameter, tracheid density, cell wall thickness, thickness-to-span-ratio, and conduit lumen fraction in both earlywood and latewood. Wood anatomical samples were prepared using a portable sliding microtome (G.S.L.-1 lightweight microtome, WSL) and a light microscope (Leica DM2500). This dataset spans 2011–2023, with full branch-level coverage for 2020–2023, whereas some thinner branches formed only in recent years and therefore do not contain rings from earlier years. By providing annual, treatment-specific anatomical measurements, this dataset can help quantify structural acclimation to global change, clarify links among phenology, wood formation, and hydraulic traits, and improve predictions of forest growth response under future climates. This dataset contains one data file in comma separate (.csv) format. Additional metadata are provided: one data dictionary and a file-level metadata file in comma separate (.csv) format and a user guide in PDF (*.pdf) format.
Low-molecular-weight (LMW) aromatics are crucial in meditating fungal processes for plant biomass decomposition. Some LMW compounds are employed as electron donors for oxidative degradation in brown rot (BR), an efficient wood-degrading strategy in fungi that selectively degrades carbohydrates but leaves modified lignins. Previous understandings of LMW aromatics were primarily based on “bulk extraction”, an approach that cannot fully reflect their real-time functions during BR. Here, we applied an optimized molecular imaging method that combines matrix-assisted laser desorption ionization (MALDI) with Fourier-transform ion cyclotron resonance mass spectrometry (FTICR-MS) to directly measure the temporal profiles of BR aromatics as Rhodonia placenta decayed a wood wafer. We found that some phenolics were pre-existing in wood, while some (e.g., catechin-methyl ether and dihydroxy-dimethoxyflavan) were generated immediately after fungal activity. These pinpointed aromatics might be recruited to drive early BR oxidative mechanisms by generating Fenton reagents, Fe2+ and H2O2. As BR progressed, ligninolytic products were accumulated and then modified into various aromatic derivatives, confirming that R. placenta depolymerizes lignin. Together, this work confirms aromatic patterns that have been implicated in BR fungi, and it demonstrates the use of MALDI-FTICR-MS imaging as a new approach to monitor the temporal changes of LMW aromatics during wood degradation.
European demand for renewable energy resources has led to rapidly increasing transatlantic exports of wood pellets from the southeastern United States (SE US) since 2009. Disagreements have arisen over the global greenhouse gas reductions associated with replacing coal with wood, and groups on both sides of the Atlantic Ocean have raised concerns that increasing biomass exports might negatively affect SE US forests and the ecosystem services they provide. We use the telecoupling framework to test assertions that the intended benefits of the wood pellet trade for Europe might be offset by negative consequences in the SE US. Through a review of current literature and available data sets, we characterize the observed and potential changes in the environmental, social, and economic components of the sending and receiving regions to assess the overall sustainability of this renewable energy system. We conclude that the observed transatlantic wood pellet trade is an example of a mutually beneficial telecoupled system with the potential to provide environmental and socioeconomic benefits in both the SE US and Europe despite some negative effects on the coal industry. We recommend continued monitoring of this telecoupled system to quantify the environmental, social, and economic interactions and effects in the sending, receiving, and spillover systems over time so that evidence-based policy decisions can be made with regard to the sustainability of this renewable energy pathway.
?There are many existing buildings with load-bearing mass masonry walls, whose energy performance could be improved with the retrofit of insulation. However, adding insulation to the interior side of walls of such masonry buildings in cold (and wet) climates may cause performance and durability problems. Some concerns, such as condensation and freeze-thaw have known solutions. But wood members embedded in the masonry structure will be colder (and potentially wetter) after an interior insulation retrofit. Moisture content and relative humidity were monitored at joist ends in historic mass brick masonry walls retrofitted with interior insulation in a cold climate (Zone 5A); data were collected from 2012-2015. Eleven joist ends were monitored in all four orientations. One limitation of these results is that the renovation is still ongoing, with limited wintertime construction heating and no permanent occupancy to date. Measurements show that many joists ends remain at high moisture contents, especially at north- and east-facing orientations, with constant 100 percent RH conditions at the worst cases. These high moisture levels are not conducive for wood durability, but no evidence for actual structural damage has been observed. Insulated vs. non-insulated joist pockets do not show large differences. South facing joists have safe (10-15 percent) moisture contents. Given the uncertainty pointed out by research, definitive guidance on the vulnerability of embedded wood members is difficult to formulate. In high-risk situations, or when a very conservative approach is warranted, the embedded wood member condition can be eliminated entirely, supporting the joist ends outside of the masonry pocket.
Disturbances from insect pests threaten ecologically and economically important goods and services supplied by forests, including wood production and carbon sequestration. We highlight the factors that influence these services’ resistance, a term quantifying the initial response to disturbance. Insects inflict damage through a range of mechanisms, prompting distinct plant physiological responses that scale to influence ecosystem processes and, with time, goods and services. The degree and timing of tree mortality and defoliation affect the amount of residual vegetation available to support compensatory wood production and influence carbon sequestration by changing rates of detritus-fueled decomposition. Compounding, or sequential, insect attacks may prime a forest for additional disturbance, further eroding wood production and carbon sequestration. Forest management practices that promote biological and structural diversity, and augment or retain limiting biological and nutrient resources, may buffer against the effects of insect pests on wood production and carbon sequestration.
This work demonstrates that the integration of supercritical carbon dioxide extraction with slow pyrolysis is an effective method for the production of value-added chemicals and charcoal that is an attractive alternative to coke for industry. Integration of technologies is key for the development of holistic biorefineries that exploit all parts of the biomass feedstock and generate little or ideally no waste. In fact, the use of waste or low valued wood fractions is attractive due to their plentiful abundance and lack of exploitation. Supercritical carbon dioxide has been demonstrated to be effective at the removal of over half of extractives from low quality wood and forestry wastes, which can account for up to 11 wt %, of the dried biomass in waste needles. High extractive yields by supercritical carbon dioxide extraction illustrates the potential of utilizing low quality wood as an alternative feedstock for the sustainable production of value-added chemicals. We report high yields of steroids and derivatives, terpenes and other plant metabolites were obtained in the extracts of needles, branches and bark. Importantly, supercritical carbon dioxide extraction had little impact neither on the physical properties of original wood nor on the yield of solid charcoal. This indicates that extraction by supercritical carbon dioxide can be used as a method for adding further value to the process by removal of bio-based chemicals, whilst still maintaining the yield of the solid fuel product. Moreover, the heat treatment temperature and supercritical carbon dioxide extraction had a significant impact on the tar yields during pyrolysis, leading to an increase in naphthalene, polycyclic aromatic hydrocarbons, aromatic and phenolic fractions with greater temperature. These results are promising as they show that the charcoal obtained from this renewable feedstock could be used as an alternative to fossil-based coke in applications including ferroalloy industries.
Heterologous production of fungal ligninolytic cocktails is challenging due to the low yields of catalytically active lignin modifying peroxidases. Production using a natural system, such as a wood-rotting fungus, is a promising alternative if specific or preferential induction of the ligninolytic activities could be achieved. Using transcriptomics, gene expression of the white-rot Dichomitus squalens during growth on mixtures of aromatic compounds, with ring structures representing the two major lignin sub-units, was compared to a wood substrate. Most of the genes encoding lignin modifying enzymes (laccases and peroxidases) categorised as highly or moderately expressed on wood were expressed similarly on aromatic compounds. Higher expression levels of a subset of manganese and versatile peroxidases was observed on di- compared to mono-methoxylated aromatics. The expression of polysaccharide degrading enzymes was lower on aromatic compounds compared to wood, demonstrating that the induction of lignin modifying enzymes became more specific. Finally, this study suggests potential for aromatic waste streams, e.g. from lignocellulose pretreatment, to produce a lignin-specific enzyme cocktail from D. squalens or other white-rot fungi.
Hydrogen release during pyrolysis of woody biomass is studied considering anisotropicity and inhomogeneity of wood structure. A new anisotropic shrinkage model is proposed based on the decomposition of main wood constituents, i.e., cellulose, hemicellulose, and lignin. The new shrinkage model can predict the temporal evolution of the wood structure, and the differences between axial and radial shrinkage during pyrolysis. The model agrees very well with several experimental data from the literature. Based on particle temperature during conversion, the pyrolysis is partitioned into four stages, and the hydrogen release and H 2 formation from each stage are investigated. Stage (IV) of pyrolysis, from 1000 to 1273 K, is found to be efficient for H 2 production owing to the production of considerable mass of H with a minimal amount of tar species. Furthermore, the char quality is found to be different at the end of stages (II), (III), and (IV), where around 67.7, 80.5, and 93.4% wt. of solid residue is made of carbon, respectively. The model is also used to explain how the heating rate affects the temperature distribution inside the particle and how it shifts the peak of hydrogen release. Finally, the pyrolysis of two inhomogeneous wood samples — a beech twig with bark and a beech dowel with growth rings — are investigated. The bark can affect the pyrolysis rate, products, and flow pattern inside the particle. The growth rings do not have a considerable effect on the pyrolysis rate and products, but they have a significant impact on the flow pattern. This has an important implication for char conversion studies where the internal surface area and porosity field distribution have a significant effect on the gasification and oxidation rates.
Syringyl (S) lignin content and the syringyl-to-guaiacyl (S/G) lignin ratio are important characteristics of wood and lignocellulosic biomass. While numerous methods are available for estimating S lignin units and the S/G ratio, in this work, a new method based on Raman spectroscopy that uses the 370 cm –1 Raman band-area intensity (370-area) was developed. The reliability of the Raman method for determining S content was first tested by the quantitative analysis of three syringyl lignin models by sampling them, separately, in dioxane and in Avicel. Good linear correlations between the 370 cm –1 intensity and model concentrations were obtained. Next, the percent syringyl (%S) lignin units in various woods were measured by correlating the 370 cm –1 Raman intensity data with values of S units in lignin determined by three regularly used methods, namely, thioacidolysis, DFRC, and 2D-HSQC NMR. The former two methods take into account only the monomers cleaved from β–O–4-linked lignin units, whereas the NMR method reports S content on the whole cell wall lignin. When the 370-area intensities and %S values from the regularly used methods were correlated, good linear correlations were obtained (R 2 = 0.767, 0.731, and 0.804, respectively, for the three methods). The correlation with the highest R 2 , i.e., with the 2D NMR approach, is introduced for estimating S units in wood lignins by Raman spectroscopy as, in principle, both represent the whole cell wall lignin and not just the portion of lignin that gets cleaved to release monomers. The Raman analysis method is quick, uses minimal harmful chemicals, is carried out nondestructively, and is insensitive to the wet or dry state of the sample. The only limitations are that the sample of wood contains at least 30% S and not be significantly fluorescent, although the latter can be mitigated in some cases.
This paper reports a new method of applying Deep Eutectic Solvents (DES) for extracting lignin from woody biomass with high yield and high purity. DES mixtures prepared from Choline Chloride (ChCl) and four hydrogen-bond donors–acetic acid, lactic acid, levulinic acid and glycerol–were evaluated for treatment of hardwood (poplar) and softwood (D. fir). It was found that these DES treatments can selectively extract a significant amount of lignin from wood with high yields: 78% from poplar and 58% from D. fir. The extracted lignin has high purity (95%) with unique structural properties. We discover that DES can selectively cleave ether linkages in wood lignin and facilitate lignin removal from wood. The mechanism of DES cleavage of ether bonds between phenylpropane units was investigated. The results from this study demonstrate that DES is a promising solvent for wood delignification and the production of a new source of lignin with promising potential applications.
In animals, gut microbes are essential for digestion. Here in this paper, we show that bacteria outside the gut can also play a critical role in digestion. In shipworms, wood-eating marine bivalves, endosymbiotic bacteria are found within specialized cells in the gills. We show that these endosymbionts produce wood-degrading enzymes that are selectively transported to the shipworm’s bacteria-free gut, where wood digestion occurs. Because only selected wood-degrading enzymes are transported, the shipworm system naturally identifies those endosymbiont enzymes most relevant to lignocellulose deconstruction without interference from other microbial proteins. Furthermore, this work expands the known biological repertoire of bacterial endosymbionts to include digestion of food and identifies previously undescribed enzymes and enzyme combinations of potential value to biomass-based industries, such as cellulosic biofuel production.
Abstract Forests provide multiple benefits that include sequestering carbon, supporting biodiversity, and providing wood products. Managing temperate forests to achieve these benefits sustainably is challenging given the legacy of past human impacts, the complexity of forest development, and increasing but unpredictable disturbances. These intricacies prompted debate about the most effective management of temperate forests to achieve climate mitigation while sustaining forest productivity, regeneration, and diversity. Most research focused on management impacts under relatively stable environmental conditions, whereas forests are facing increasingly frequent and more severe climatic and biotic disturbances. Here, we used a regionally calibrated forest growth model to simulate the effects of forest management on carbon, biodiversity, and wood production under prevalent natural disturbances in the northeastern US. We developed scenarios combining forest management and disturbance regimes based on assumptions of species-specific tree regeneration and mortality rates. We compared passive management with no cutting that prioritizes maintaining existing forest trees with two common regional harvest practices: exploitative timber harvest that prioritizes short-term wood production and regenerative timber harvest that prioritizes regenerating biodiverse native forest tree seedlings. In the absence of natural disturbance, no cutting provides 41% higher forest carbon storage and 50% higher tree structural diversity after 100 years than exploitative or regenerative practices. The presence of drought, windstorm, pest, and disease disturbances altered these outcomes. Regenerative forest management provides 25% higher forest carbon storage and 26% higher tree structural diversity after 100 years than no cutting. Our results demonstrate that wood products and their carbon storage and fossil emission avoidance are important for determining the total climate benefits of forest management under natural disturbances. Our findings highlight that natural disturbance regimes should be considered when selecting management to promote multiple forest benefits, suggesting the need for tailored as opposed to one-size-fits-all policies to sustainably manage temperate forests worldwide.
Abstract A limitation to understanding drivers of long-term trends in terrestrial nitrogen (N) availability in forests and its subsequent influence on stream nitrate export is a general lack of integrated analyses using long-term data on terrestrial and aquatic N cycling at comparable spatial scales. Here we analyze relationships between stream nitrate concentrations and wood δ 15 N records (n = 96 trees) across five neighboring headwater catchments in the Blue Ridge physiographic province and within a single catchment in the Appalachian Plateau physiographic province in the eastern United States. Climatic, acidic deposition, and forest disturbance datasets were developed to elucidate the influence of these factors on terrestrial N availability through time. We hypothesized that spatial and temporal variation of terrestrial N availability, for which tree-ring δ 15 N records serve as a proxy, affects the variation of stream nitrate concentration across space and time. Across space at the Blue Ridge study sites, stream nitrate concentration increased linearly with increasing catchment mean wood δ 15 N. Over time, stream nitrate concentrations decreased with decreasing wood δ 15 N in five of the six catchments. Wood δ 15 N showed a significant negative relationship with disturbance and acidic deposition. Disturbance likely exacerbated N limitation by inducing nitrate leaching and ultimately enhancing vegetative uptake. As observed elsewhere, lower rates of acidic deposition and subsequent deacidification of soils may increase terrestrial N availability. Despite the ephemeral modifications of terrestrial N availability by these two drivers and climate, long-term declines in terrestrial N availability were robust and have likely driven much of the declines in stream nitrate concentration throughout the central Appalachians.