Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WEAR RESISTANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Strategies for control and mitigation of efflorescence in metakaolin-based geopolymers

Efflorescence can be harmful to material performance as a consequence of microstructural changes due to leaching and carbonation of alkalis. This article identifies mechanisms of efflorescence in metakaolin-based geopolymers, and approaches to reduce free/mobile alkali cations and pore network connectivity, and hence reduce efflorescence. Mechanical, mass transport and microstructural properties are assessed in metakaolin-based geopolymer cements produced using different alkali concentrations in the alkali activator and substitution/addition of blast furnace slag, silica fume, calcium aluminate cement, silicone oil and a dispersive admixture. The most effective strategy to reduce efflorescence results from increasing Si/Al in the geopolymer gel by addition of soluble silicate, silica fume or silicone oil. Addition of calcium aluminate cement or a dispersive admixture also reduce efflorescence, but are less effective. These results confirm that efflorescence may be reduced by controlling the amount of soluble silicates and reducing free alkali cations in geopolymers, providing enhanced performance and durability.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A closer look at corrosion of steel reinforcement bars in concrete using 3D neutron and X-ray computed tomography

Corrosion of reinforcing bars constitutes the largest threat to the durability of concrete structures. Thus, several studies have investigated the nature of the corrosion products, most using post-mortem analyses. However, corrosion products evolve when in contact with oxygen, hindering result interpretation. This work presents instead a state-of-the-art, non-destructive 3D method for the assessment of corrosion of embedded reinforcements. Multimodal neutron and X-ray tomography was used to observe, non-destructively, the characteristics of the corrosion products in two concrete samples, with the aim of investigating possible benefits of the use of this technique for reinforced concrete structures. One sample was naturally corroded, extracted from an 81-year-old bridge, the other was corroded via the galvanostatic method, resulting in corrosion-induced cracks. Quantitative and qualitative data was acquired, including the iron-to-rust volumetric ratio in macroscopic interfacial voids and the thickness of the corrosion layer at the steel concrete interface. The iron-to-rust volumetric ratio corresponded to large, soluble, corrosion products, forming in environments with low availability of oxygen for both samples.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Predicting concrete compressive strength using hybrid ensembling of surrogate machine learning models

This study aims to implement a hybrid ensemble surrogate machine learning technique in predicting the compressive strength (CS) of concrete, an important parameter used for durability design and service life prediction of concrete structures in civil engineering projects. For this purpose, an experimental database consisting of 1030 records has been compiled from the machine learning repository of the University of California, Irvine. The database was used to train and validate four conventional machine learning (CML) models, namely Artificial Neural Network (ANN), Linear and Non-Linear Multivariate Adaptive Regression Splines (MARS-L and MARS-C), Gaussian Process Regression (GPR), and Minimax Probability Machine Regression (MPMR). Subsequently, the predicted outputs of CML models were combined and trained using ANN to construct the Hybrid Ensemble Model (HENSM). It is observed that the proposed HENSM produces higher predictive accuracy compared to the CML models used in the present study. The predictive performance of all models for CS prediction was compared using the testing dataset and it is found that the HENSM model attained the highest predictive accuracy in both phases. Based on the experimental results, the newly constructed HENSM model is very potential to be a new alternative in handling the overfitting issues of CML models and hence, can be used to predict the concrete CS, including the design of less polluting and more sustainable concrete constructions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Unraveling disadhesion mechanism of epoxy/CSH interface under aggressive conditions

Almost all FRP-reinforced concrete exposed to the marine environment are susceptible to durability deficiencies due to failure of the FRP/epoxy/concrete interface, especially the vulnerable epoxy/concrete interface, which is frequently attacked by water and ions. Herein, molecular dynamics simulations of epoxy/CSH interface under different environmental exposures are utilized to specifically elucidate the degradation principles of water and ions on the bonding properties and mechanical responses of the epoxy/concrete interface. The environmental sequences associated with the interfacial bonding degradation are arranged as Na{sub 2}SO{sub 4} + NaCl>NaCl>Na{sub 2}SO{sub 4} > Water>Dry. Remarkably, water molecules weaken the interaction between the epoxy and CSH by robbing interfacial H- and Ca-O bonds, thereby reducing the energy barrier to interfacial peel and shear failure. The weakening effects are exacerbated by the presence of aggressive ions, as Na{sup +} ions attracted to the CSH surface accumulate more water molecules in the interfacial region by forming hydrated ions clusters, which ultimately accelerates the epoxy/CSH interfacial degradation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Sorption and electrokinetic properties of ASR product and C-S-H: A comparative modelling study

Alkali-silica reaction (ASR) is one of the most important concrete durability issues worldwide. ASR products formed at high temperature have a structure similar to the natural mineral shlykovite. Reactive Grand Canonical Simulations were used to investigate sorption of K{sup +}, Cl{sup −} and Ca{sup 2+} on C-S-H and ASR products at different pH (10.0 to 13.0) and pore water chemistry. Divalent ions can overcompensate for the negative surface charge, in particular for C-S-H, which leads to a co-adsorption of negative species such as Cl{sup −}. At high K/Ca in solution, monovalent K{sup +} can desorb calcium from C-S-H and shlykovite surface. The calculated Ca/K partition coefficient shows a higher affinity of ASR product for K{sup +}, while C-S-H favours Ca{sup 2+}. The uptake of K{sup +} by ASR products lowers the alkali concentration in the solution and could thus slow down the rate of ASR.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Simultaneous x-ray and neutron 4D tomographic study of drying-driven hydro-mechanical behavior of cement-based materials at moderate temperatures

The drying of cement-based materials is intimately related to their durability, which has significant economic, social and environmental repercussions. The evolution of the saturation of the pore network and the associated drying shrinkage are in fact leading causes of cracking and of the ensuing penetration of aggressive chemicals. This process is highly heterogeneous, due to the thermo-hydric spatial gradients developing in the material from the exposed surfaces to its core and because of local effects, driven by the intrinsically heterogeneous micro-structure (e.g., by the distribution of pores and aggregates). It follows that macroscopic, sample-scale measurements cannot fully disclose the complexity of the underlying processes. In the last few decades, significant advances in full-field techniques have allowed an unprecedented insight into these local processes. For cement-based materials, x-ray and neutron tomography lend themselves as ideal, and highly complementary, tools for the study of their thermo-hydro-mechanical behavior. Notably, the high sensitivity to density variations of x-ray imaging gives access to the developments of fractures, in 4D (3D + time). On the other hand, neutron tomography allows the study of the evolution of the moisture field in 4D, thanks to its high hydrogen sensitivity. The combination of these two techniques provides a unique insight in thermo-hydro-mechanical couplings, e.g., the effect of cracks on the water content field. This contribution presents novel 5D datasets (3D tomographies along time, plus truly simultaneous x-ray and Neutron rapid acquisitions) in-operando of a cement paste and of a concrete sample heated at moderate temperatures (up to 140{sup ∘}C). The analysis of this 5D data-set (once aligned in time and across modalities) allows for example a quantification of the 4D moisture profiles which were found to predict an overall water loss at hydric equilibrium coherent with the corresponding analytical analysis. In the cement paste sample, the x-ray dataset captures the evolution of an extensive cracking network, opening and propagation toward the core of the sample. A novel analysis procedure is here proposed which allows the extraction of these fractures and the analysis of their interplay with local drying as captured through neutron imaging. This for example reveals the depth of penetration of drying in the vicinity of the fractures along time, which is essential for the assessment and calibration of hydro-mechanical coupled models.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Internal curing of cement pastes by means of superabsorbent polymers visualized by neutron tomography

Highlights: • The kinetics of water release from SAPs were studied by neutron tomography. • The time window for internal curing was linked to the water release from SAPs. • The water release links to the SAP effectiveness to mitigate autogenous shrinkage. • One SAP type was effective while another prematurely released its stored water. Superabsorbent polymers (SAPs) are used to counteract self-desiccation in order to mitigate autogenous shrinkage, a problem in cementitious systems with a low water-to-cement ratio. The release kinetics during internal curing are of importance as not all SAP types are able to efficiently mitigate autogenous shrinkage. In this study, neutron tomography is used to study and visualize the water release kinetics over time. Per-voxel analysis of the time-attenuation curve was performed using piecewise-constant functions. Two different SAP types were studied, one being able to mitigate autogenous shrinkage and one quickly releasing its stored water after final setting. The tomography results correspond to autogenous shrinkage measurements and nuclear magnetic resonance tests. The visualization provides information on the time of water release by the SAPs after setting and the time window of internal curing. This opens additional insights towards the application of SAPs in the construction sector and provides information on the mechanism of internal curing.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Synthesis, characterization, and thermodynamic study of selected K-based zeolites

Potassium-rich zeolites often occur in cementitious systems, as K{sup +} is widespread in various cementitious materials, such as Portland, blended and alkali-activated cements. The knowledge of their stability and of thermodynamic models for solid solutions with Na{sup +} and Ca{sup 2+} are critical to understand long-term development and durability in such cements. Completing previous studies on Na- and Ca-based zeolites, the current work aims to determine the thermodynamic data of 14 types of K-based zeolites, which could possibly form in cementitious systems. The zeolites were synthesized hydrothermally, exchanged with K{sup +}, and characterized thoroughly with respect to framework structures, elemental compositions, water contents, and bond variations. Their thermodynamic properties were derived from the experimental solubility data, which allowed establishing predominance diagrams in the K{sub 2}O-SiO{sub 2}-Al{sub 2}O{sub 3}-H{sub 2}O system. The K-based zeolites typically showed the lowest solubility between 0 and 100 °C, with the notable exception of Ca-gismondine and two Na-based zeolites: natrolite and Na-mordenite.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Cu- and Zn-doped alkali activated mortar – Properties and durability in (bio)chemically aggressive wastewater environments

Metakaolin-based alkali activated mortars (AAM) - with and without CuSO{sub 4}·5H{sub 2}O and ZnO addition (mass ratio M{sup n+}/solid binder 0.08% to 1.7%) - were casted and exposed within an extensive long-term field campaign over the period of 20 months to a sewer basin, strongly affected by biogenic acid corrosion. (Un-)exposed AAM were tested regarding their physicochemical and microstructural properties, bioreceptivity and overall durability. Metal addition led to a retarding effect during alkali-activation reaction, as well as to an increase in open porosity of up to 3.0% and corresponding lower compressive strength of up to 10.9%. Reduced microbial colonization and diversity were observed on AAM with Cu, while Zn addition led to increased biodiversity. We propose that the observed higher durability of Cu-doped AAM is due to antibacterial effects and associated reduction of biogenic acid production, superseding overall negative effects of metal-dosage on physical material properties. Observed lower durability of Zn-doped AAM was related to combined negative physicochemical and microbial effects.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Limestone calcined clay cement and concrete: A state-of-the-art review

This article reviews the rapidly developing state-of-the-art literature available on the subject of the recently developed limestone calcined clay cement (LC{sup 3}). An introduction to the background leading to the development of LC{sup 3} is first discussed. The chemistry of LC{sup 3} hydration and its production are detailed. The influence of the properties of the raw materials and production conditions are discussed. The mixture design of concrete using LC{sup 3} and the mechanical and durability properties of LC{sup 3} cement and concrete are then compared with other cements. At the end the economic and environmental aspects of the production and use of LC{sup 3} are discussed. The paper ends with suggestions on subjects on which further research is required.

36 MATERIALS SCIENCE↗
DOE OSTI2021

DEM analysis of the effect of interface transition zone on dynamic splitting tensile behavior of high-strength concrete based on multi-phase model

Highlights: • Crushable aggregates with the real geometry shape are generated by using clump-cluster method. • Flat-Joint Model is adopted as the constitutive law. • The tensile strength is almost not affected by ITZ strength when its strength exceeds 0.8 times that of mortar. • A modified formula that can reflect the functional relationship between the ITZ strength and the TDIF is proposed. The tensile strength is one of the main parameters in the design of concrete structures and has an important influence on the cracking performance and durability of concrete materials. As the weak region in concrete, the strength of the interface transition zone (ITZ) directly affects the dynamic mechanical response of concrete. Meanwhile, considering that the tensile performance of concrete is far weaker than its compressive performance, the study of the strength of ITZ is of great significance to the dynamic tensile fracture characteristics and mechanical properties of concrete. In this paper, a method combining 3D scanning technology and Clump-Cluster was proposed to generate a real geometry shape model of crushable aggregate. On this basis, the 3D discrete element model (DEM) of high-strength concrete was constructed using the Flat-Joint Model (FJM). The effects of the ITZ strength on the failure mode, number of microcracks, tensile strength and strain rate effect of high-strength concrete under strain rates from 0.01/s to 100/s were studied by splitting tensile test. The simulation results indicate that the number of microcracks generated decreases with the increase of ITZ strength, and the proportion of ITZ cracks decreases obviously. When the ITZ strength exceeds the critical value of 0.8 times that of mortar, the tensile strength is almost not affected by ITZ strength. In addition, based on the numerical simulation results, a modified formula that can reflect the functional relationship between the ITZ strength and the dynamic increasing factor of the concrete tensile strength (TDIF) is proposed, and the rationality of the TDIF modified formula is verified.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Intrinsic self-stressing and low carbon Engineered Cementitious Composites (ECC) for improved sustainability

Highlights: • A self-stressing criterion for ECC was established and experimentally verified. • An intrinsic self-stressing ECC was developed by utilizing LC3 and CSA cement. • Initial maximum expansion and later expansion loss were successfully tailored. • Expansion mechanism was identified by XRD patterns. • Self-stressing ECC has 64% of the carbon footprint of conventional concrete. Engineered Cementitious Composites (ECC) is an emerging cementitious composite material with ultra-high ductility. However, its higher cement dosage limits its material greenness and leads to concerns with drying shrinkage. In this research, an ECC utilizing limestone calcined clay cement (LC3) and calcium sulphoaluminate cement (CSA) is investigated, focusing on minimizing the material's embodied carbon while enhancing its durability with intrinsic self-stressing functionality. A self-stressing criterion is theoretically established and experimentally verified. X-ray diffraction patterns reveal an ettringite quantity that modulates the initial expansion and later expansion-reversal of LC3-CSA-ECC to support a persistent self-stressing mechanism. LC3-CSA-ECC has a lower (64%) carbon footprint and similar embodied energy compared to conventional concrete. When combined with the durability advantage (tiny crack, high ductility of 5.5%, and self-stressing function), this low carbon self-stressing ECC holds promise as a sustainable repair material that lowers the embodied and operational carbon in civil infrastructure.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Ettringite hysteresis under sorption from molecular simulations

Highlights: • Hybrid Grand Canonical Monte Carlo (GCMC) and Molecular Dynamics (MD) simulations are performed. • Anisotropic large strain coefficient of crystal shrinkage of ettringite is provided. • Entropy increases when ettringite converts into metaettringite. • Sorption-induced stress may lead to columns collapse upon drying. • H-bonds involving OH groups in columns play a role in hysteresis. The response of ettringite under sorption is critical for the utilization of this mineral as an energy storage material and to understand the concrete durability problems associated with ettringite formation. We report molecular simulations directly sampling the osmotic ensemble to understand the sorption processes and structural changes in ettringite-metaettringite transition. Desorption branch and sorption-induced volume changes from simulations agree with the experiments. The structural changes at low relative humidity are analyzed, revealing for the first time details of metaettringite structure. The reversibility under sorption observed experimentally is captured by simulation in the ettringite domain. The reversibility in the conversion of metaettringite into ettringite is not captured by the direct simulations in the osmotic ensemble due to the large volume changes associated with ettringite desorption. Finally, we discuss the role of hydrogen bonds on the hysteresis in ettringite.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Formulation of low clinker blended cements and concrete with enhanced fresh and hardened properties

Blended cements appear as the most promising way to massively produce cements with reduced environmental footprints. However, considering the generally lower early mechanical performance of highly blended cements, chemical admixtures are increasingly relied upon to increase early strength. However, in many cases this can negatively impact other properties as rheology and durability. This paper proposes an approach to formulate low clinker cements and concrete using moderate alkali activation or gypsum to enhance early and long-term compressive strength, without inducing excessive alkali-silica reaction (ASR) expansion. It examines blended cements containing burnt oil shale along with limestone and fly ash or slag as supplementary cementitious materials. It optimizes the combination of polycarboxylate ether (PCE) superplasticizers with the strength enhancers. Along with the use of Ca(NO{sub 3}){sub 2} to drive PCE adsorption, this provides good rheology control, increased early and long-term compressive strength, as well as acceptable ASR expansion in cements with only 50% clinker.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of autogenous shrinkage on microcracking and mass transport properties of concrete containing supplementary cementitious materials

It is well-known that supplementary cementitious materials (SCMs) and low water-to-binder (w/b) ratio increase autogenous shrinkage, but the impact on microcracking and long-term transport properties is less understood. This paper examines the effect of microcracking induced by autogenous shrinkage on transport properties of concretes cured up to ~3.6 years. Variables include SCM type (9% SF, 70% GGBS), w/b ratio (0.20–0.45), maximum-aggregate-size (MSA: 5–20 mm) and shrinkage reducing admixture (SRA). Oxygen diffusivity, permeability and water sorptivity were correlated with microcracks characterised using laser scanning confocal microscopy and 3D X-ray microtomography. Results show greater microcracking in mixes containing SCMs, low w/b ratio and large MSA. At the same w/b ratio and binder type, strong positive correlations are observed between transport and microcracking with increasing MSA, confirming the negative impact of autogenous shrinkage. SRA was effective in reducing these effects. The significance is compared with drying shrinkage and implications for durability are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Tribological studies of a novel high-performance aromatic thermosetting copolyester containing carbon nanotubes for artificial hip joints

A high-performance aromatic thermosetting copolyester containing multi-walled carbon nanotubes (ATSP-MWNTs) was synthesized, characterized, and tribologically tested against cobalt-chromium-molybdenum (CoCrMo) alloy) as a potential replacement for ultra-high molecular weight polyethylene (UHMWPE) in artificial joints. By investigating the tribological properties of ATSP-MWNTs, crosslinked UHMWPE vs CoCrMo alloy, it was found that ATSP-MWNTs exhibited a lower and more stable friction coefficient and negligible wear. Further, unlike the case of ATSP-MWNTs, an obvious wear was present for UHMWPE. It is believed that transfer films in ATSP-MWNTs help to stabilize and decrease friction and wear. In addition, large and aggregated particles of UHMWPE seem to contribute to an increase in friction and wear.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Collaborative Research: Polymer Macrocycles: A novel topology to control dynamics of rubbery materials

Understanding the dynamics of polymers of different topologies is an important field of study and one of the most important unanswered questions in this field is "how do circular polymers move," particularly in the melt state. New information suggests that molecular topology, specifically circular rings, impacts the response of materials in nanometer- scale confinement. The work performed here tackles these subjects through a collaboration in which specialists in polymer synthesis, polymer rheology and scattering methods, and in the physics of nanoconfinement work together to investigate the thermophysical behavior of circular macromolecules. The project goals are to use a novel synthesis method of "green" oxidative polymerization to produce high purity macrocycles and to investigate their linear viscoelastic behavior in order to fully characterize the dynamics of circular macromolecules to sizes that correspond to linear molecule entanglement densities higher than previously obtainable with synthetic polymers. Chemical chain end characterization and critical edge fractionation coupled with direct visualization of the prepared polymers through the use of polymer amplification methods are proposed in order to quantify the numbers of circular and linear molecules in each sample. The study of the linear viscoelastic response of blends of linear and circular molecules is also to be undertaken in the project. Nonlinear viscoelastic measurements, including extensional viscosity, are to be made. Strong differences in behavior between linear chains and circular ones also provides an important opportunity for new technology to break the "magic triangle" for tires: it is believed that improving one of the three key attributes - traction, wear, rolling resistance - necessarily sacrifices at least one of the others. Rubber made from cyclic polymers has the potential to break out of this triangle by reducing the so-called Payne effect in reinforced rubbers because circular macromolecules are less sensitive to nanoconfinement than their linear counterparts. The work has as one objective to characterize the impact of nanoconfinement on the behavior of large circular macromolecules. In addition, the dynamics of carbon black filled circular macromolecules are to be studied to test the hypothesis that the resulting rubbery materials will exhibit a reduced Payne effect.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗