Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ultrathin materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

High temperature, low mass solar blanket development

This paper presents methods of incorporating ultrathin silicon solar cells into photovoltaic blankets for space applications. This type of cell has the highest power-to-mass ratio and best performance under space radiation of any silicon solar cell. Interconnect materials and designs, and the results of the investigation of the applicability of parallel-gap resistance welding for interconnecting ultrathin cells are discussed. Data relating contact pull strength and cell electrical degradation to welding parameters such as time, voltage, and pressure are presented. Methods for bonding ultrathin cells to flexible substrates and for bonding thin covers to these cells are described, and the results of vacuum thermal cycling and thermal soak tests on prototype ultrathin cell test coupons are included.

Mesch, H. G.↗
DOE OSTI2026

MnRhBi3: A Cleavable Antiferromagnetic Metal

This dataset contains DFT input and output files supporting the theoretical modeling in the associated publication (Chem. Mater. 2024, 36, 11306-11316). The calculations characterize MnRhBi3, an orthorhombic (Cmmm) van der Waals-layered intermetallic compound that cleaves easily between neighboring Bi layers. The dataset is organized into three calculation types: (i) Bulk: Structural relaxations of the periodic MnRhBi3 crystal in antiferromagnetic (AFM) and ferromagnetic (FM) configurations, using the vdW-DF-optB86b functional. These provide the equilibrium lattice constants, magnetic energy differences (AFM is 0.5 meV/f.u. lower than FM), and magnetic moments (4.4 µB/Mn, 0.17 µB/Rh, 0.18 µB/Bi) reported in Table 1 of the main text. (ii) Slab: Same magnetic configurations computed with an 18 Ang vacuum layer introduced between Bi layers, used to calculate the cleavage energy Ec = 0.56 J/m2 (AFM) and 0.57 J/m2 (FM), establishing MnRhBi3 as a van der Waals-layered material comparable to graphite, MoS2, and CrI3. (iii) ELF: Single-point calculation on the relaxed bulk AFM geometry with LELF=.TRUE., producing the ELFCAR file used to generate electron localization function isosurfaces and contour maps (Fig. 2, main text) showing Bi lone pairs directed into the van der Waals gaps. All folders contain CONTCAR, INCAR, KPOINTS, OUTCAR, and POSCAR. The ELF/ folder additionally contains ELFCAR. Calculations were performed using VASP 6.3.2 with PBE + vdW-DF-optB86b, PAW potentials, and an energy cutoff of 800 eV.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Synergistically Chemical and Thermal Coupling between Graphene Oxide and Graphene Fluoride for Enhancing Aluminum Combustion

Metal combustion reaction is highly exothermic and is used in energetic applications, such as propulsion, pyrotechnics, powering micro- and nano-devices, and nanomaterials synthesis. Aluminum (Al) is attracting great interest in those applications because of its high energy density, earth abundance, and low toxicity. Nevertheless, Al combustion is hard to initiate and progresses slowly and incompletely. On the other hand, ultrathin carbon nanomaterials, such as graphene, graphene oxide (GO), and graphene fluoride (GF), can also undergo exothermic reactions. Herein, we demonstrate that the mixture of GO and GF significantly improves the performance of Al combustion as interactions between GO and GF provide heat and radicals to accelerate Al oxidation. Overall, our experiments and reactive molecular dynamics simulation reveal that GO and GF have strong chemical and thermal couplings through radical reactions and heat released from their oxidation reactions. GO facilitates the dissociation of GF, and GF accelerates the disproportionation and oxidation of GO. When the mixture of GO and GF is added to micron-sized Al particles, their synergistic couplings generate reactive oxidative species, such as CF x and CF x O y , and heat, which greatly accelerates Al combustion. This work demonstrates a new area of using synergistic couplings between ultrathin carbon nanomaterials to accelerate metal combustion and potentially oxidation reactions of other materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tuning electronic properties in LaNiO 3 thin films by B-site Cu-substitution

Resistors are essential parts of futuristic all-oxide electronic architectures, yet easily overlooked due to their apparent simplicity. In this study, design of thin films with specific resistance spanning six orders of magnitude by partial substitution of Cu 2+ for Ni 3+ in the metallic conductor LaNiO 3 is shown. Substitution is attainable across the whole composition range using atomic layer deposition on LaAlO 3 (100) pc substrates, however with some inclusion of Ruddlesden–Popper RP1 phase (La 2 CuO 4 ) at high levels of Cu-incorporation. The thermal stability of the resistance is based on a metal–insulator transition that evolves from non-existent for LaNiO 3 to above room-temperature for high Cu 2+ substitution. This provides further insight in the metal–insulator transition found for correlated rare-earth nickelates, especially the type of transition seen for ultrathin films of LaNiO 3 that is usually attributed to oxygen vacancy formation. Materials with variable resistivity and metal–insulator-transition temperatures are key in the design of futuristic electronics such as metal–insulator-transition-driven neuromorphic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

A Versatile Method for Creating Ultrathin Films of Polyzwitterions with Antifouling Properties

Protein repellent (i.e., antifouling) properties of ultrathin polymeric films have been ascribed to the formation of a dense layer of adsorbed polymers, which causes steric hindrance to protein adsorption on underlying substrates. The antifouling properties of the films are hypothesized to be independent of polymer hydrophilicity based on previous studies involving uncharged polymers. Here, to test the hypothesis and extend it to the realm of charged polymers, we have developed a grafting method for creating ultrathin layers of polyzwitterions on solid surfaces. To demonstrate the efficacy of this method, poly[1-(3-sulfopropyl-1)-2-vinylpyridinium betaine] (P2VPPS) was synthesized via free-radical polymerization and immobilized onto surfaces by using a photoreactive benzophenone derivative as the cross-linker, which was covalently bonded to either quartz or Si/SiOx substrates through a silane anchor. We found that ultrathin films with thicknesses of less than 10 nm can be obtained in dry states using 365 nm ultraviolet (UV) cured/cross-linked surface coatings. These films were found to be hydrophilic and undergo structural rearrangements in the presence of water. The antifouling performance of the films was evaluated using Pseudomonas aeruginosa strain PAO1 bacterium as the fouling agent and exhibited antifouling properties with a kinetic control via the coating method (i.e., spin-coating and drop-casting). In particular, the surface area coverages due to the PAO1 cell attachment on the quartz substrates coated with P2VPPS were found to be ∼5% and ∼0% for the spin-coated and drop-casted films, respectively, after 4 h. These results show that the grafting method can be used to generate surfaces with antifouling properties based on ultrathin films of polyzwitterions.

Pseudomonas aeruginosa↗
DOE OSTI2024

Preparation of ultrathin sputtered gold films on palladium as efficient oxygen reduction electro-catalysts

Herein, we present the preparation of ultrathin gold (Au) films on different M (M = Pd, Pt, Rh, Ir, and Ru) electrodes (Au/M) using magnetron sputtering deposition for oxygen reduction reaction (ORR). The ORR electro-catalytic activities of prepared Au/M catalysts increase as follows: Au/Ru < Au/Ir < Au/Rh < Au/Pt < Au/Pd. Accordingly, the oxygen reduction catalytic behaviors of the Au-modified palladium (Au/Pd) thin films with various Au thicknesses (0.16, 0.24, 0.5, and 1 nm) are investigated in acidic environments. It is found that Au modifications can promote oxygen reduction performances due to the development of more catalytic active sites on the Pd catalyst through the existence of Au atoms. Noticeably, Au/Pd samples exhibit a connection in oxygen reduction ability as a function of Au thickness, with the ultrathin 0.16 nm Au/Pd being the most active ORR catalyst. Significantly, the 0.16 nm Au/Pd material demonstrates superior stability after 1000 potential cycles compared with the 0.16 nm Pt/Pd owing to the influence of Au coating and structurally stable surfaces. Therefore, surface modification with the deposition of Au films on Pd represents a favorable technique to boost both the ORR capability and stability of the electro-catalysts.

Magnetron sputtering↗
DOE OSTI2021

Free-standing ultrathin lithium metal–graphene oxide host foils with controllable thickness for lithium batteries

Thin (≤20 μm) and free-standing Li metal foils would enable precise prelithiation of anode materials and high-energy-density Li batteries. Existing Li metal foils are too thick (typically 50 to 750 μm) or too mechanically fragile for these applications. Here, we developed a facile and scalable process for the synthesis of an ultrathin (0.5 to 20 μm), free-standing and mechanically robust Li metal foil within a graphene oxide host. In addition to low areal capacities of ~0.1 to 3.7 mAh cm –2 , this Li foil also has a much-improved mechanical strength over conventional pure Li metal foil. Our Li foil can improve the initial Coulombic efficiency of graphite (93%) and silicon (79.4%) anodes to around 100% without generating excessive Li residue, and increases the capacity of Li-ion full cells by 8%. In conclusion, the cycle life of Li metal full cells is prolonged by nine times using this thin Li composite anode.

25 ENERGY STORAGE↗
NASA NTRS1974

Radiation damage and structure recorded at high resolution in grains from fine fractions of Luna 16 surface material

Samples returned to earth by Luna 16, were studied with a high voltage electron microscope for ultramicroscopic features. The following amazing features were noted in particles of surface material returned in all the lunar trips: A very high density of tracks of nuclear particles, ultrathin amorphous shells, highly rounded forms, and amazingly good ordering of crystal lattice. These features were used along with calibration experiments in solving the following problems: (1) determining the energy spectrum and chemical abundances of the very heavy nuclei in the solar wind and in the solar cosmic rays; (2) studying the past activity of the sun; (3) obtaining data on lunar dynamic processes affecting dust particles; (4) analyzing composite effects caused by penetration of solar wind into the lunar surface material; and (5) establishing the existence of the ancient lunar atmosphere and magnetic field.

Durrieu, L.↗
DOE OSTI2020

Grain boundary structure of two-dimensional tellurium revealed by 4D STEM

The recent realization of 2D tellurium (tellurene) has allowed scientists to demonstrate an air-stable monoelemental van der Waals material with remarkable potential for applications in electronics and optoelectronics. The chiral-chain structure of ultrathin Te allows controllable electronic and optical properties due to the non-monotonic carrier mobility and an increase in electronic band-gap as the thickness is reduced. Scalable and accurate production of 2D Te-based functional devices will require detailed knowledge of structural defects and strain field distributions that can be linked to transport properties.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Ultrathin VO 2 Films on Functional Substrates

The metal–insulator transition (MIT) in vanadium dioxide (VO 2 ) thin films is strongly affected by grain size, thickness, and interfacial properties. Typically, a minimum thickness around 50 nm is required for VO 2 to exhibit a significant MIT when functional substrates like sapphire and silicon are used. Several works have shown that thin films below 20 nm, with up to 2–3 decades of change in the resistance across the MIT, can be achieved but require complex pre- or postprocessing of the samples. We show that predeposition substrate condition control facilitates the direct growth of VO 2 ultrathin 15 nm films, exhibiting a resistance change between 3 and 4 decades across the MIT. Our findings indicate that the interface between the film and the substrate is crucial in determining the initial growth layers and the structural evolution. With appropriate substrate surface treatment, the desired VO 2 MIT can be enhanced regardless of the substrate crystallographic orientation. Moreover, we propose a novel approach to obtain large resistance changes across the MIT in ultrathin VO 2 films by incorporating a predeposited 1.5 nm vanadium oxide buffer layer, thereby eliminating the need to use different materials or complex pre- or postprocessing of the samples. Here we also demonstrate that this method improves the transition of 25–50 nm VO 2 thin films on silicon substrates. Our study reveals a simple approach for direct growth of ultrathin VO 2 films exhibiting a significant MIT, which is commonly accepted unattainable over substrates of technological importance, such as sapphire and silicon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Altermagnetic polar metallic phase in ultrathin epitaxially strained RuO 2 films

Altermagnetism refers to a wide class of magnetic orders featuring magnetic sublattices with opposite spins related by rotational symmetries, resulting in nontrivial spin splitting and magnetic multipoles. However, the direct observation of the altermagnetic transition remains elusive. Here, by combining theoretical analysis, electrical transport, X-ray, and optical spectroscopies, we establish a phase diagram in hybrid molecular beam epitaxy-grown RuO 2 /TiO 2 (110) films, mapping symmetries along with altermagnetic/electronic/structural phase transitions as functions of film thickness and temperature. This features an altermagnetic metallic polar phase in epitaxially strained 2 nm films, suggesting a potential link between polar metals and altermagnetic materials. Such a clear signature of a magnetic phase transition at ~500 K is observed exclusively in ultrathin strained films, unlike in bulk RuO 2 single crystals. These results highlight the power of epitaxial heterostructure engineering to induce altermagnetism in systems initially nonmagnetic, opening avenues for realizing emergent quantum phases with multifunctional properties.

RuO2 thin film↗
DOE OSTI2023

Emergent quasi-two-dimensional metallic state derived from the Mott-insulator framework

Recent quasi-two-dimensional (quasi-2D) systems with judicious exploitation of the atomic monolayer or few-layer architecture exhibit unprecedented physical properties that challenge the conventional wisdom on condensed matter physics. Here we show that the infinite layer SrCuO 2 (SCO), a topical cuprate Mott insulator in bulk form, can manifest an unexpected metallic state in the quasi-2D limit when SCO is grown on TiO 2 -terminated SrTiO 3 (STO) substrates. The sheet resistance does not conform to Landau's Fermi liquid paradigm. Hard x-ray core-level photoemission spectra demonstrate a definitive Fermi level that resembles the hole doped metal. Soft x-ray absorption spectroscopy also reveals features analogous to those of a hole doped Mott insulator. Based on these results, we conclude that the hole doping does not occur at the interfaces between SCO and STO; instead, it comes from the transient layers between the chain-type and the planar-type structures within the SCO slab. In conclusion, the present work reveals a metallic state in the infinite layer SCO and invites further examination to elucidate the spatial extent of this state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Mixed-dimensional stackable electronics enabled by freestanding 2D/3D materials

2D material-based devices have received great deal of attention as they can be easily stacked to obtain multifunctionality. With their ultrathin thicknesses, such multifunctioning devices become so flexible and conformal that they can be placed onto any 3D featured surfaces. However, 2D heterostructures are typically demonstrated as stacked flakes where single or few devices can be fabricated due to lack of strategies for layer-by-layer stacking of 2D materials at the wafer scale. In this talk, I will discuss about our unique strategy to isolate wafer-scale 2D materials into monolayers and stack them into a heterostructures by using a layer-resolved splitting (LRS) technique. This technique enables my group at MIT to explore unprecedented wafer-scale 2D heterodevices including integrated photonics, 3D neuromorphic computing, and microLEDs, which will be introduced in my talk. While 2D heterostructures promise interesting futuristic devices, the performance of 2D material-based devices is substantially inferior to that of conventional 3D semiconductor materials. However, 3D materials exist as their bulk form, thus it is challenging to stack them together for heterostructures. Obviously, conformal coating of such single-crystalline bulks on 3D features is impossible. My group at MIT has recently invented a 2D materials-based layer transfer (2DLT) technique that can produce single-crystalline freestanding membranes from any compound materials with their excellent semiconducting performance. This technique is based on remote epitaxy of single-crystalline films on graphene followed by peeling from graphene. Stacking of freestanding 3D material membranes will enable unprecedented 3D heterostructures whose performance is expected to be superior to that of 2D heterostructures. I will talk about our group’s effort to apply single-crystalline freestanding membranes for flexible, conformal electronics as well as for 3D heterostructures. Finally, I will conclude my talk by discussing perspectives of coupling 2D-3D freestanding membranes for 2D-3D mixed heterostructured devices that can be enabled by our LRS and 2DLT techniques.

Kim, Jeehwan↗
DOE OSTI2021

Dynamic and weak electric double layers in ultrathin nanopores

The unique properties of aqueous electrolytes in ultrathin nanopores have drawn a great deal of attention in a variety of applications, such as power generation, water desalination, and disease diagnosis. Inside the nanopore, at the interface, properties of ions differ from those predicted by the classical ionic layering models (e.g., Gouy–Chapman electric double layer) when the thickness of the nanopore approaches the size of a single atom (e.g., nanopores in a single-layer graphene membrane). Here, using extensive molecular dynamics simulations, the structure and dynamics of aqueous ions inside nanopores are studied for different thicknesses, diameters, and surface charge densities of carbon-based nanopores [ultrathin graphene and finite-thickness carbon nanotubes (CNTs)]. The ion concentration and diffusion coefficient in ultrathin nanopores show no indication of the formation of a Stern layer (an immobile counter-ionic layer) as the counter-ions and nanopore atoms are weakly correlated in time compared to the strong correlation observed in thick nanopores. The weak correlation observed in ultrathin nanopores is indicative of a weak adsorption of counter-ions onto the surface compared to that of thick pores. The vanishing counter-ion adsorption (ion–wall correlation) in ultrathin nanopores leads to several orders of magnitude shorter ionic residence times (picoseconds) compared to the residence times in thick CNTs (seconds). The results of this study will help better understand the structure and dynamics of aqueous ions in ultrathin nanopores.

2D materials↗
DOE OSTI2021

Cationic Ordering and Its Influence on the Magnetic Properties of Co-Rich Cobalt Ferrite Thin Films Prepared by Reactive Solid Phase Epitaxy on Nb-Doped SrTiO 3 (001)

Here, we present the (element-specific) magnetic properties and cation ordering for ultrathin Co-rich cobalt ferrite films. Two Co-rich Co x Fe 3-x O 4 films with different stoichiometry (x=1.1 and x=1.4) have been formed by reactive solid phase epitaxy due to post-deposition annealing from epitaxial CoO/Fe 3 O 4 bilayers deposited before on Nb-doped SrTiO 3 (001). The electronic structure, stoichiometry and homogeneity of the cation distribution of the resulting cobalt ferrite films were verified by angle-resolved hard X-ray photoelectron spectroscopy. From X-ray magnetic circular dichroism measurements, the occupancies of the different sublattices were determined using charge-transfer multiplet calculations. For both ferrite films, a partially inverse spinel structure is found with increased amount of Co 3+ cations in the low-spin state on octahedral sites for the Co 1.4 Fe 1.6 O 4 film. These findings concur with the results obtained by superconducting quantum interference device measurements. Further, the latter measurements revealed the presence of an additional soft magnetic phase probably due to cobalt ferrite islands emerging from the surface, as suggested by atomic force microscope measurements.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Ultrathin layer photocatalysts

A transparent ceramic substrate is covered by a photocatalyst layer, at least partially. The photocatalyst layer includes a semiconductor material that, upon exposure to electromagnetic radiation, forms a plurality of electrons and a plurality of holes that remain confined to the photocatalyst layer. The transparent ceramic substrate has a diameter that is larger than the wavelength of the electromagnetic radiation for light trapping.

Wang, Yifeng↗
DOE OSTI2023

Multi–Resonant Mie Resonator Arrays for Broadband Light Trapping in Ultrathin c–Si Solar Cells

Effective photon management is critical to realize high power conversion efficiencies for thin crystalline silicon (c–Si) solar cells. Standard few–100–µm–thick bulk cells achieve light trapping with macroscopic surface textures covered by thin, continuous antireflection coatings. Such sizeable textures are challenging to implement on ultrathin cells. Here, it is illustrated how nanoscale Mie–resonator–arrays with a bimodal size distribution support multiple resonances that can work in concert to achieve simultaneous antireflection and light–trapping across the broad solar spectrum. The effectiveness of these light–trapping antireflection coatings is experimentally demonstrated on a 2.8 µm–thick c–Si solar cell. The measured short–circuit current and corresponding power conversion efficiency are notably improved, achieving efficiencies as high as 11.2%. Measurements of the saturation current density on completed cells indicate that thermal oxides can effectively limit surface recombination. Finally, the presented design principles are applicable to a wide range of solar cells.

14 SOLAR ENERGY↗