Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TiO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Highly Active Rutile TiO 2 Nanocrystalline Photocatalysts

The controllable synthesis of rutile TiO 2 single crystal particles with the preferential orientation of {111} facets still remains a scientific and technological challenge. Here, we developed a facile route for fabrication of rutile TiO 2 nanorod crystals (RTiO 2 NRs) having high ratios of oxidative {111} to reductive {110} surfaces. RTiO 2 NRs were synthesized using a peroxo-titanium complex (PTC) approach, which was controlled by changing the Ti/H 2 O 2 ratio. The thus obtained RTiO 2 NRs revealed a high tendency to agglomerate through orientation-dependent attachment along the {110} facets. This resulted in an increased {111}/{110} surface ratio and led to a markedly improved photocatalytic activity of RTiO 2 NR aggregates. The reported findings illustrate the rich potential of the herein proposed facile and energy-efficient synthesis of nanostructured rutile TiO 2 -based photocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Single-Facet Dominant Anatase TiO 2 (101) and (001) Model Catalysts to Elucidate the Active Sites for Alkanol Dehydration

Alkanol dehydration on Lewis acid-base pairs of transition metal oxide catalysts is a reaction of importance in oxygen removal from biomass-derived feedstocks and their conversion to chemicals in general. However, catalysts with a high degree of structural heterogeneity, such as commercial TiO 2 powders, are not well-suited to establish rigorous structure-function relationships at an atomic level. Here, we provide compelling evidence for the effects of surface orientation of TiO 2 catalyst on elimination reactions of alcohols. Two anatase titania model catalysts, with preferential exposure of (101) and (001) facets, were synthesized and studied for 2-propanol dehydration using kinetic, isotopic, microscopic, and spectroscopic measurements, coupled with DFT calculations. Surface Lewis acid sites were found to be active for 2-propanol dehydration and (101) facets are more reactive than (001) facets under the reaction conditions studied. On both anatase surfaces, 2-propanol was found to dehydrate via concerted E2 elimination pathways, but with different initial states and thus also different intrinsic activation barriers. Molecular 2-propanol dehydration dominates on TiO2 (101) while on TiO 2 (001), 2-propanol simultaneously converts to more stable 2-propoxide before dehydration, which then requires higher activation energies for E2 elimination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

TiO 2 /TiN Interface Enables Integration of Ni 5 P 4 Electrocatalyst with a III–V Tandem Photoabsorber for Stable Unassisted Solar-Driven Water Splitting

H 2 production by direct photoelectrochemical (PEC) water splitting has remained unachievable commercially, mainly due to rapid failure at the interface between the photoabsorber(s) and catalyst(s). PEC devices made from multijunction III-V semiconductors with platinum group metal (PGM) catalysts have yielded impressive initial solar-to-H 2 (STH) efficiency >19%, which rapidly corrodes in aqueous electrolytes. Here, TiO 2 /TiN layers were fused to create a bifunctional interface between a GaInP 2 /GaAs III-V tandem photoabsorber and a polycrystalline Ni 5 P 4 HER catalyst. Here, the TiO 2 serves as a conducting corrosion barrier, while a thin layer of much denser TiN (1 nm) blocks interlayer diffusion during fabrication. This strategy allows the elevated temperatures needed to crystallize the Ni 5 P 4 nanoparticles and fuse to the TiO 2 /TiN junction to achieve minimal optical loss without damaging the sensitive photoasbsorber. The resulting photocathode exhibits an initial STH efficiency of 11.4%-13.2% in sodium phosphate electrolyte at neutral pH 7. It operated continuously for over 200 h without failure above 10% STH efficiency, exceeding all previous benchmarks. The earth-abundant Ni 5 P 4 catalyst replaces costly PGM catalysts at comparable HER activity in neutral, acidic, or basic pH electrolytes.

08 HYDROGEN↗
DOE OSTI2023

Revolutionizing Lithium Storage Capabilities in TiO 2 by Expanding the Redox Range

TiO 2 is a widely recognized intercalation anode material for lithium-ion batteries (LIBs), yet its practical capacity is kinetically constrained due to sluggish lithium-ion diffusion, leading to a lithiation number of less than 1.0 Li + (336 mAh g -1 ). Here, the growth of TiO 2 crystallites is restrained by integrating Si into the TiO 2 framework, thereby enhancing the charge transfer and creating additional active sites potentially residing at grain boundaries for Li + storage. This strategy is corroborated by the expanded redox range of Ti, as thoroughly demonstrated via synchrotron radiation-based X-ray spectroscopy and Cs-corrected electron microscopy. Consequently, when deployed for lithium storage, the tailored material achieves an extraordinarily high reversible capacity of 559 mAh g -1 , 116% of the theoretical maximum of 483 mAh g -1 calculated based on all active species, while simultaneously retaining superior rate capability and robust cycling stability. Further, this work offers fresh perspectives on the revitalization of traditional electrode materials to achieve enhanced capacities.

25 ENERGY STORAGE↗
DOE OSTI2021

Flexible and high-performance electrochromic devices enabled by self-assembled 2D TiO 2 /MXene heterostructures

Transition metal oxides (TMOs) are promising electrochromic (EC) materials for applications such as smart windows and displays, yet the challenge still exists to achieve good flexibility, high coloration efficiency and fast response simultaneously. MXenes (e.g. Ti 3 C 2 T x ) and their derived TMOs (e.g. 2D TiO 2 ) are good candidates for high-performance and flexible EC devices because of their 2D nature and the possibility of assembling them into loosely networked structures. Here we demonstrate flexible, fast, and high-coloration-efficiency EC devices based on self-assembled 2D TiO 2 /Ti 3 C 2 T x heterostructures, with the Ti 3 C 2 T x layer as the transparent electrode, and the 2D TiO 2 layer as the EC layer. Benefiting from the well-balanced porosity and connectivity of these assembled nanometer-thick heterostructures, they present fast and efficient ion and electron transport, as well as superior mechanical and electrochemical stability. We further demonstrate large-area flexible devices which could potentially be integrated onto curved and flexible surfaces for future ubiquitous electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Oxygen evolution reaction over catalytic single-site Co in a well-defined brookite TiO 2 nanorod surface

Efficient electrocatalysts for the oxygen evolution reaction (OER) are paramount to the development of electrochemical devices for clean energy and fuel conversion. However, the structural complexity of heterogeneous electrocatalysts makes it a great challenge to elucidate the surface catalytic sites and OER mechanisms. Here, we report that catalytic single-site Co in a well-defined brookite TiO 2 nanorod (210) surface (Co-TiO 2 ) presents turnover frequencies that are among the highest for Co-based heterogeneous catalysts reported to date, reaching 6.6 ± 1.2 and 181.4 ± 28 s -1 at 300 and 400 mV overpotentials, respectively. Based on grand canonical quantum mechanics calculations and the single-site Co atomic structure validated by in situ and ex situ spectroscopic probes, we have established a full description of the catalytic reaction kinetics for Co-TiO 2 as a function of applied potential, revealing an adsorbate evolution mechanism for the OER. The computationally predicted Tafel slope and turnover frequencies exhibit exceedingly good agreement with experiment.

25 ENERGY STORAGE↗
DOE OSTI2021

Electron shuttle in the MOF derived TiO 2 /CuO heterojunction boosts light driven hydrogen evolution

Metal organic frameworks (MOFs) have emerged as a novel template to develop porous photocatalytic materials for solar fuel conversion. In this work, we report the synthesis, charge separation dynamics, and photocatalytic performance of the TiO 2 /CuO heterostructure derived from mixed-phase MOFs based on Ti and Cu metal nodes, which demonstrates significantly enhanced catalytic activity for the hydrogen evolution reaction (HER) compared to metal oxides derived from single node MOFs. More importantly, using transient absorption spectroscopy, we identified the specific role each component in the heterostructure plays and unravelled the key intermediate species that is responsible for the exceptional photocatalytic activity of the heterostructure. We found that the HER is initiated with ultrafast electron transfer (<150 fs) from the molecular photosensitizer to the conduction band of TiO 2 , where TiO 2 acts as an electron mediator and shuttles the electron to the CuO cocatalyst, facilitating charge separation and ultimately boosting the HER efficiency. Overall, these results not only demonstrate the great potential of using mixed-phase MOFs as templates to synthesize mesoporous heterostructure photocatalysts but also provide important insight into the HER mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

BODIPY and dipyrrin as unexpected robust anchoring groups on TiO 2 nanoparticles

Covalent attachment of molecules to metal oxide surfaces typically demands the presence of an anchoring group that in turn requires synthetic steps to introduce. BODIPY (4,4-difluoro-4-bora-3a,4a-diaza-s-indacene) chromophores have long been used in dye-sensitized solar cells, but carboxylic acid groups typically had to be installed to act as surface anchors. We now find that even without the introduction of such anchors, the unmodified BODIPY can bind to TiO 2 surfaces via its BF 2 group through boron–oxygen surface bonds. Dipyrrin, the parent molecule of BODIPY, is also capable of binding directly to TiO 2 surfaces, likely through its chelating nitrogen atoms. These binding modes prove to be even more robust than that of an installed carboxylate and offer a new way to attach molecular complexes to surfaces for (photo)catalytic applications since, once bound, we show that surface bound BODIPY and dipyrrin derivatives exhibit ultrafast photoinjection of electrons into the conduction band of TiO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Binding and stability of MgO monomers on anatase TiO 2 (101)

In catalysis, MgO is often used to modify the acid-base properties of support oxides and to stabilize supported metal atoms and particles on oxides. In this study, we show how the sublimation of MgO powder can be used to deposit MgO monomers, hither on anatase TiO 2 (101). A combination of X-ray electron spectroscopy, high-resolution scanning tunneling microscopy, and density functional theory is employed to gain insight into the MgO monomer binding, electronic and vibrational properties, and thermal stability. In the most stable configuration, the Mg and O of the MgO monomer bind to two surface oxygens and one undercoordinated surface titanium, respectively. The additional binding weakens the Mg-O monomer bond and makes the Mg more ionic. The monomers are thermally stable up to 650 K, where the onset of diffusion into the TiO 2 bulk is observed. Finally, the monomeric MgO species on TiO 2 (101) represent an ideal, atomically precise system with modified acid-base properties and will be employed in our future catalytic studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Quasi-deterministic localization of Er emitters in thin film TiO 2 through submicron-scale crystalline phase control

With their shielded 4f orbitals, rare-earth ions (REIs) offer optical and electron spin transitions with good coherence properties even when embedded in a host crystal matrix, highlighting their utility as promising quantum emitters and memories for quantum information processing. Among REIs, trivalent erbium (Er 3+ ) uniquely has an optical transition in the telecom C-band, ideal for transmission over optical fibers, making it well suited for applications in quantum communication. The deployment of Er 3+ emitters into a thin film TiO 2 platform has been a promising step toward scalable integration; however, like many solid-state systems, the deterministic spatial placement of quantum emitters remains an open challenge. Here, we investigate laser annealing as a means to locally tune the optical resonance of Er 3+ emitters in TiO 2 thin films on Si. Using both nanoscale x-ray diffraction measurements and cryogenic photoluminescence spectroscopy, we show that tightly focused below-gap laser annealing can induce anatase to rutile phase transitions in a nearly diffraction-limited area of the films and improve local crystallinity through grain growth. As a percentage of Er:TiO 2 is converted to rutile, the Er 3+ optical transition blueshifts by 13 nm. We explore the effects of changing laser annealing time and show that the amount of optically active Er:rutile increases linearly with laser power. We additionally demonstrate local phase conversion on microfabricated Si structures, which holds significance for quantum photonics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Synthesis of TiO{sub 2} nanoparticles decorated with gold nanoclusters using pulsed laser ablation in liquid

Amorphous spherical titanium dioxide (TiO{sub 2}) nanoparticles, decorated gold nanoparticles, are shown to be formed under irradiation of commercial TiO{sub 2} nanopowders dispersed in aqueous solution of hydrogen tetrachloroaurate (HAuCl{sub 4}) by second-harmonic nanosecond pulses of an Nd : YAG laser. It is found that these hybrid nanostructures are formed during laser-induced remelting of the initial nanoparticles, stimulated by gold nanoclusters (providing more efficient absorption of visible laser radiation by titanium dioxide) recovered on their surface. The morphology and chemical composition of the newly formed hybrid nanomaterials are investigated in detail by electron microscopy, Raman spectroscopy, and energy-dispersive analysis. It is shown that the average size and number of gold nanoparticles recovered on the TiO{sub 2} surface can be controlled by varying the concentration ratio of the initial nanomaterial and HAuCl{sub 4}. A spectroscopic analysis of light scattering by single hybrid nanoparticles and the results of numerical calculation of the structure of electromagnetic fields near their surface indicate good prospects of these hybrid nanomaterials for various applications in modern optics, optoelectronics, and nanophotonics; for example, for designing chemo- and biosensor platforms and new-generation solar cells. (nanoparticles)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Operando pair distribution function analysis of nanocrystalline functional materials: the case of TiO 2 -bronze nanocrystals in Li-ion battery electrodes

Structural modelling of operando pair distribution function (PDF) data of complex functional materials can be highly challenging. To aid the understanding of complex operando PDF data, this article demonstrates a toolbox for PDF analysis. The tools include denoising using principal component analysis together with the structureMining , similarityMapping and nmfMapping apps available through the online service `PDF in the cloud' ( PDFitc , https://pdfitc.org/). The toolbox is used for both ex situ and operando PDF data for 3 nm TiO 2 -bronze nanocrystals, which function as the active electrode material in a Li-ion battery. The tools enable structural modelling of the ex situ and operando PDF data, revealing two pristine TiO 2 phases (bronze and anatase) and two lithiated Li x TiO 2 phases (lithiated versions of bronze and anatase), and the phase evolution during galvanostatic cycling is characterized.

Chemistry↗
DOE OSTI2020

Novel complex ceramic oxides, Ln 2 TiO 5 (Ln = La, Sm, Gd, Tb, Dy, Ho, Er, and Yb), for polyphase nuclear waste‐forms

Abstract As part of a broader study of ceramic nuclear waste‐forms, four different lanthanide titanates were fabricated; La 0.1 Sm 0.1 Gd 0.1 Tb 0.1 Dy 0.3 Ho 0.1 Er 0.2 YbTiO 5 , Sm 0.3 Gd 0.3 Dy 0.3 Yb 1.1 TiO 5 , Sm 0.1 Gd 0.4 Dy 0.4 Yb 1.1 TiO 5 , and Sm 0.2 Gd 0.2 Dy 0.2 Yb 1.4 TiO 5 . The aim was to produce single‐phase novel materials with cubic symmetry, capable of incorporating a wide variety of cations and with acceptable radiation tolerance. The chemistry flexibility and radiation tolerance are some of the major desirable properties for nuclear waste‐form materials. By using multiple lanthanides the average lanthanide radius can be controlled and consequently the structure, along with properties such as radiation tolerance. The radiation tolerance was assessed using in situ 1 MeV krypton irradiation and transmission electron microscopy characterization. Those materials for which cubic symmetry was achieved displayed better radiation tolerance; a greater critical fluence of ions ( F c ) was required for the crystalline to amorphous transition, and a lower temperature was required to maintain crystallinity ( T c ) during irradiation.

Aughterson, Robert D.↗
DOE OSTI2022

Mass Transport in Binary TiO 2 :SiO 2 and GeO 2 :SiO 2 Direct Ink Write Glasses

The mass transport mechanisms of Ti in TiO 2 :SiO 2 and Ge in GeO 2 :SiO 2 direct ink write, additively manufactured glasses were studied. Due to the low solubility of Ti in SiO2 and high melting point of TiO 2 relative to SiO 2 , Ti transport was found to occur via solid state interdiffusion between adjoining SiO 2 and TiO 2 precursor particles. The diffusivity of titanium in SiO 2 measured over typical sintering temperatures (1000-1300 °C) using Rutherford backscattering spectrometry was D = 9.1 × 10 -7 [m2/sec] exp ($\frac{378[\frac{kJ}{mol}]}{RT}$. This provides an estimate of ~30 nm for the diffusion length under typical sintering conditions (2 hrs. at 1200 °C). Although Ti and Ge have similar diffusivities in SiO 2 glass at low concentrations, GeO 2 was found to be much more mobile during the sintering of printed GeO 2 :SiO 2 green bodies. This was evident in glasses with phase separated GeO 2 regions over length scales of ~10 μm and in experiments involving binary xerogels in which GeO 2 migrated over ~10 μm through cracked, porous SiO 2 layers. Large phase separated regions and long transport lengths in GeO 2 :SiO 2 suggest that the transport of GeO 2 occurs prior to the densification of the SiO 2 matrix via an alternative mechanism such as capillary flow. These results inform important considerations in the design of index modifying inks for the direct ink write process, namely initial precursor phase, mutual solubility with the base SiO 2 glass, and mass transport throughout the sintering process.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Development of Fe 3 O 4 core–TiO 2 shell nanocomposites and nanoconjugates as a foundation for neuroblastoma radiosensitization

Neuroblastoma is the most common extracranial solid malignancy in childhood which, despite the current progress in radiotherapy and chemotherapy protocols, still has a high mortality rate in high risk tumors. Nanomedicine offers exciting and unexploited opportunities to overcome the shortcomings of conventional medicine. The photocatalytic properties of Fe 3 O 4 core-TiO 2 shell nanocomposites and their potential for cell specific targeting suggest that nanoconstructs produced using Fe 3 O 4 core-TiO 2 shell nanocomposites could be used to enhance radiation effects in neuroblastoma. In this study, we evaluated bare, metaiodobenzylguanidine (MIBG) and 3,4-Dihydroxyphenylacetic acid (DOPAC) coated Fe 3 O4@TiO 2 as potential radiosensitizers for neuroblastoma in vitro. The uptake of bare and MIBG coated nanocomposites modestly sensitized neuroblastoma cells to ionizing radiation. Conversely, cells exposed to DOPAC coated nanocomposites exhibited a five-fold enhanced sensitivity to radiation, increased numbers of radiation induced DNA double-strand breaks, and apoptotic cell death. The addition of a peptide mimic of the epidermal growth factor (EGF) to nanoconjugates coated with MIBG altered their intracellular distribution. Cryo X-ray fluorescence microscopy tomography of frozen hydrated cells treated with these nanoconjugates revealed cytoplasmic as well as nuclear distribution of the nanoconstructs. The intracellular distribution pattern of different nanoconjugates used in this study was different for different nanoconjugate surface molecules. Cells exposed to DOPAC covered nanoconjugates showed the smallest nanoconjugate uptake, with the most prominent pattern of large intracellular aggregates. Interestingly, cells treated with this nanoconjugate also showed the most pronounced radiosensitization effect in combination with the external beam x-ray irradiation. Further studies are necessary to evaluate mechanistic basis for this increased radiosensitization effect. Preliminary studies with the nanoparticles carrying an EGF mimicking peptide showed that this approach to targeting could perhaps be combined with a different approach to radiosensitization – use of nanoconjugates in combination with the radioactive iodine. Much additional work will be necessary in order to evaluate possible benefits of targeted nanoconjugates carrying radionuclides.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

High pressure induced atomic and mesoscale phase behaviors of one-dimensional TiO 2 anatase nanocrystals

Here, we report the high pressure phase and morphology behavior of ordered anatase titanium dioxide (TiO 2 ) nanocrystal arrays. One-dimensional TiO 2 nanorods and nanorices were synthesized and self-assembled into ordered mesostructures. Their phase and morphological transitions at both atomic scale and mesoscale under pressure were studied using in situ synchrotron wide- and small-angle x-ray scattering (WAXS and SAXS) techniques. At the atomic scale, synchrotron WAXS reveals a pressure-induced irreversible amorphization up to 35 GPa in both samples but with different onset pressures. On the mesoscale, no clear phase transformations were observed up to 20 GPa by synchrotron SAXS. Intriguingly, sintering of TiO 2 nanorods at mesoscale into nano-squares or nano-rectangles, as well as nanorices into nanowires, were observed for the first time by transmission electron microscopy. Such pressure-induced nanoparticle phase-amorphization and morphological changes provide valuable insights for design and engineering structurally stable nanomaterials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Creating self-assembled arrays of mono-oxo (MoO 3 ) 1 species on TiO 2 (101) via deposition and decomposition of (MoO 3 ) n oligomers

Significance The design and synthesis of hierarchically ordered oxides remains a critical challenge in material science and catalysis. Here, we demonstrate that well-ordered homotopic arrays of mono-oxo (MoO 3 ) 1 can be easily prepared on anatase TiO 2 (101) via the deposition of (MoO 3 ) n oligomers. As revealed by our combined experiential and theoretical studies, the oligomers spontaneously decompose and self-assemble into chemically identical and thermally stable monomers. The oligomer decomposition is permitted at room temperature due to the dynamic coupling of decomposition steps to the lattice phonons of TiO 2 . We identify transient mobility of the oligomers as key to the self-assembly of the complete overlayer. The ease of preparation and thermal stability of this atomically precise system makes it highly suitable for a broad range of applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Scalable Al 2 O 3 –TiO 2 Conductive Oxide Interfaces as Defect Reservoirs for Resistive Switching Devices

Abstract Resistive switching devices herald a transformative technology for memory and computation, offering considerable advantages in performance and energy efficiency. Here, a simple and scalable material system of conductive oxide interfaces is employed, and their unique properties are leveraged for a new type of resistive switching device. An Al 2 O 3 –TiO 2 ‐based valence‐change resistive switching device, where the conductive oxide interface serves both as the bottom electrode and as a reservoir of defects for switching, is demonstrated. The amorphous–polycrystalline Al 2 O 3 –TiO 2 conductive interface is obtained following the technological path of simplifying the fabrication of the 2D electron gases (2DEGs), making them scalable for practical mass integration. Physical analysis of the device chemistry and microstructure with comprehensive electrical analysis of its switching behavior and performance is combined. The origin of the resistive switching is pinpointed to the conductive oxide interface, which serves both as the bottom electrode and as a reservoir of oxygen vacancies. The latter plays a key role in valence‐change resistive switching devices. The new device, based on scalable and complementary metal–oxide–semiconductor (CMOS)‐technology‐compatible fabrication processes, opens new design spaces toward increased tunability and simplification of the device selection challenge.

36 MATERIALS SCIENCE↗