Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TRITIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Evaluation of High Vacuum Pump for Tritium Service

In tritium process systems, vacuum pumps are typically used to evacuate volumes and piping, as well as transfer gas to other parts of the process. This was done using the combination of an all-metal scroll pump with a metal bellows backing pump. The all-metal scroll pump, manufactured by Normetex, has been unavailable since 2012, and efforts continue to find a suitable replacement. The main obstacle is finding a pump that has no oils or polymer components, which degrade when exposed to tritium and introduce corrosive and/or hazardous impurities into the process. Since turbomolecular pumps are used in tritium processing, it is thought that pumps similar to the turbomolecular pumps would be of interest. A newer model turbomolecular pump with a variable rotation speed has been identified for use in tritium processing. The turbomolecular pump, backed by a Metal Bellows MB-601 pump with the pump heads in series, was characterized for static and gas flow conditions to determine the suction pressure at various discharge pressures or flow rates for various gases.

42 ENGINEERING↗
DOE OSTI2024

Logical Approach to Tritium Vacuum Pump Selection

Introduction Vacuum pumps are essential to the operation of tritium purification and recovery processes. However, not all vacuum pumps sold meet the requirements for tritium service. Manufacturers routinely do not fully appreciate the hazards associated with tritium, or the complex materials interactions. Therefore, a decision tree was established detailing which pump types, and certain manufacturers, are either fully compatible, limited use, or to avoid at all costs to establish a more structured and uniform approach to tritium vacuum pumps.

ANGELETTE, LUCAS↗
DOE OSTI2025

ALARA Review for Venting of Flanged Tritium Waste Containers (FTWCs) at TA-54

This project will vent headspace hydrogen and oxygen from specialized high-pressure storage vessels called flanged tritium waste containers (FTWCs). There are four of these containers located in Los Alamos National Laboratory’s (LANL’s) Technical Area 54 (TA-54), Building 1028. This building is in the southwest corner of LANL’s Material Disposal Area G. The vented headspace gas is expected to contain tritium in the form of water vapor, elemental hydrogen or a combination of both. The venting operation is expected to take place in 2025. There will be a series of operational readiness reviews prior to venting activities commencing. The FTWCs at TA-54 contain tritium-contaminated metal parts and molecular sieve media, which is a pebble-like material used to absorb water vapor from the air. This molecular sieve media inside the FTWCs is contained in metal canisters, along with some loose media material in bags. Over time, tritiated water vapor that had been adsorbed onto the media can become liberated into the FTWC headspace gas. Radiolysis can cause separation of the water vapor into its hydrogen and oxygen components, resulting in the potentially hazardous gas mixture within the FTWC. LANL has determined that continued tritium storage in these containers can pose an unsafe condition due to possible hydrogen and oxygen gas buildup within the FTWCs with a potential for explosion if sparks are generated within the FTWCs. To mitigate this hazard, the FTWCs will be stabilized by venting them in-place to remove hazardous gases.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Density Functional Theory Analysis of Candidate Tritium Permeation Barriers for Vanadium Alloys as a Fusion Structural Material

Vanadium alloys are being considered as a candidate structural material for the breeder blanket component of future fusion reactors due to their good thermal conductivity, low activation, and chemical compatibility with FLiBe. However, vanadium has a high hydrogen solubility, resulting in hydrogen diffusion and trapping in the vanadium structural alloy and lower than expected tritium breeding ratios. To mitigate the permeation of hydrogen into the structural alloy, a tritium permeation barrier will be coated onto the vanadium alloy. Multiple materials have been proposed as candidate tritium permeation barriers, but the extent to which each of these materials impacts hydrogen diffusion and trapping is still unknown. In this project, we perform atomic-scale calculations to narrow down the list of potential tritium permeation barrier candidates and to understand the mechanisms through which hydrogen diffusion is affected in these materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Project 8: Measuring the tritium beta-decay spectrum using Cyclotron Radiation Emission Spectroscopy

Abstract. The goal of the Project 8 experiment is to measure the absolute neutrino mass using tritium beta decays and a new spectroscopic technique, Cyclotron Radiation Emission Spectroscopy (CRES). The first phase of Project 8 demonstrated that CRES could be used to detect single-electron cyclotron radiation and perform precision electron spectroscopy. We are in Phase II of the experiment, performing a 100-day measurement of the endpoint of the tritium spectrum. We will demonstrate the ability to measure the last ~2 keV of the beta-decay spectrum and explore the background rate at energies just above the endpoint; CRES has the potential for extremely low backgrounds. In Phase III we will demonstrate the ability to scale up the volume of the experiment. In Phase IV we will switch the source from molecular tritium to atomic tritium, which will avoid systematic uncertainties from the final states of the molecule. I will present the current status of Project 8 Phase II and the plans for Phases III and IV.

Oblath, Noah↗
DOE OSTI2020

Measurement of the Ratio of the Neutron to Proton Structure Functions, and the Three-Nucleon EMC Effect in Deep Inelastic Electron Scattering Off Tritium and Helium-3 Mirror Nuclei

The proton and neutron structure functions Fp 2 and Fn 2, respectively are fundamental to understanding many studies in nuclear physics. They provide important information about quark distributions. For example, the ratio Fn 2/Fp 2 is one of the best measurements to find the ratio of d quark over u quark distribution inside the proton. While the calculations of structure functions and quark distributions are non-perturbative, they can be determined by the parameterization of experimental data. The understanding of Fn 2/Fp 2 and d/u as x -> 1 has a large influence on global fits and parameterization, and can be used to distinguish the non-perturbative models which give different predictions. However, Fn 2/Fp 2 measured using deuteron and hydrogen targets has large nuclear uncertainties at large x, because the nuclear effects in the deuteron become significant at large x. The MARATHON experiment, which ran in spring 2018 using the upgraded 11 GeV Jefferson Lab electron beam, employs a novel method. It performed deep inelastic scattering off tritium and helium-3 mirror nuclei to measure Fn 2/Fp 2 over the range x = 0.17 to x = 0.82. Since tritium and helium-3 are mirror nuclei, theoretical uncertainties largely cancel out in the ratio. The extracted Fn 2/Fp 2 has much smaller uncertainties compared with previous experiments at large x. The MARATHON experiment also provided results on the EMC effect for tritium and helium-3 nuclei. The results are considered essential for understanding the EMC effect. This thesis describes the MARATHON experiment, and presents results for Fn 2/Fp 2, and the EMC effect for tritium and helium-3.

Liu, Hanjie↗
DOE OSTI2025

Tritium adsorption and absorption on (100) and (001) surfaces of pure and tin defective zirconium

Zirconium alloys such as zircaloy-4 are used as tritium (T) getter materials in tritium-producing burnable absorber rods (TPBARs) due to their ability to capture T, thereby forming metal hydrides. Developing an understanding of T adsorption onto zircaloy prior to diffusion into the subsurface is relevant for rational tritium getter and TPBAR design, to improve material properties for nuclear applications. Herein, density functional theory calculations revealed the preferred binding sites for T adsorption on Zr(001) and Zr(100). The energy barriers of T transfer, along the surface and from the surface to the subsurface were computed. The adsorption properties of Zr(001) were found to be superior to those of Zr(100). Surface tin impurities were found to strongly repel T. The presence of subsurface and surface tin resulted in higher absorption energy barriers for both the forward and reverse processes. Based on the calculated energy barriers, a surface to surface T diffusion coefficient of 9.53 × 10 -10 m 2 s -1 is expected for pristine Zr(001). Finally, a surface to subsurface T diffusion coefficient on the order of 10 -13 m 2 s -1 is predicted in pristine Zr, decreasing to 10 -19 m 2 s -1 for the transfer with a subsurface tin impurity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Cluster dynamics simulations of tritium and helium diffusion in lithium ceramics

Tritium (T) and He diffusion in LiAlO 2 and LiAl 5 O 8 phases influences the performance of tritium producing burnable absorber rods (TPBARs) by affecting the gas release, swelling and thermal conductivity of Li-bearing ceramic pellets. Frenkel pair defects and clusters created by irradiation can attract T and He interstitials and form clusters of the type He i x Li, He i x Al, He i x O, T i x Li, T i x Al, and T i x O, 1 ≤ x ≤ 4 in a Li, Al or O vacancy site (notation denotes x He or T atoms in a 1 Li, 1 Al or 1 O vacant site). The concentration and mobility of each of these clusters collectively contribute to the diffusion of the He and T gases in LiAlO 2 and LiAl 5 O 8 . Here, in this work, free energy cluster dynamics simulations implemented in the Centipede code, are used to obtain the concentration and diffusivities of these clusters which are then used to calculate the total diffusivity of T and He gases in LiAlO 2 and LiAl 5 O 8 . The results show that diffusivity of T is at least one order of magnitude higher in LiAlO 2 as compared to that in LiAl 5 O 8 whereas He diffusion is 2–13 orders of magnitude higher in LiAlO 2 as compared to that in LiAl 5 O 8 . There is a higher concentration of highly diffusive species (T interstitials and T i 03 Li for the case of tritium and He i 01 Li, He i 02 Li, and He i 03 Li for the case of He) in LiAlO 2 than in LiAl 5 O 8 which increase the total diffusion of T and He in LiAlO 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2021

Asymmetry between deuterium and tritium turbulent particle flows

The asymmetry between deuterium (D) and tritium (T) turbulent particle fluxes in mixed D–T plasmas is studied with numerical simulations of nonlinear gyrokinetic turbulence in ion temperature gradient-dominated and trapped electron mode-dominated regimes. At 50–50 D–T concentration, the asymmetry, or flow separation, between D and T fluxes is such that the tritium is better confined than the deuterium in both regimes. To supplement the nonlinear simulations, an analytic quasilinear theory of the particle flux symmetry breaking is developed and is valid for general electron dynamics. Furthermore, this theory correctly predicts the numerically computed deviation in the ion density fraction (from 50–50), or ion density gradient (from the electron gradient), required to restore equal deuterium and tritium fluxes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Isotopic mass effects of tritium-fueled high-performance TFTR supershots

An increase in total stored energy correlated with the addition of tritium fuel was observed in supershots during the TFTR DT campaign. This supershot regime had strikingly high, centrally peaked ion and electron temperatures, and the largest neutron emission rates observed in TFTR. This paper presents a study of the causes of this increase in stored energy in supershots. Twenty-six supershots have been recently reanalyzed with the TRANSP plasma analysis code. Early TRANSP simulations did not accurately match the measured magnitude and time evolutions of the neutron emission rates. This mismatch is attributed to neglecting apparent increases of trace amounts of heavy impurities during neutral beam injection. The new TRANSP runs were tuned to accommodate this and match the measured global neutron emission rates. These new runs also had improved fidelity in predicting the time histories and radial dependencies of measured DT neutron emission rates. That in turn adds confidence in the simulated thermal deuterium and tritium density profiles that are needed for calculating the average hydrogenic atomic mass profiles. Six subsets of these supershots had well matched toroidal field B tor , plasma current I p , flux geometry, and total injected neutral beam power. The mix of D and T beam ions was varied for different discharges. The magnitude of the increase of the thermal ion energy W i with added tritium was relatively small, and the total W tot increase is dominated by the increase in fast beam ions with T. Analyses at times before the occurrences of deleterious MHD instabilities yielded scaling of W tot with the volume-average isotopic mass consistent with previous publications. The relative fraction of fast energy ions is expected to be small in practical tokamak reactors. Thus the increase in stored energy W tot observed in TFTR supershots does not appear likely to be significantly helpful for producing useful fusion energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Low Activity Tritium Detection in CCDs Using Deep Learning Techniques

Here, this study explores the use of charge-coupled devices (CCDs) for detecting low-energy beta particles from tritium decay - a critical signal for nuclear safety, nuclear nonproliferation, and environmental monitoring. We employ a dual approach utilizing both measured CCD data and detailed Geant4 simulations. Our analysis compares classical techniques with advanced deep learning methods, including convolutional neural networks (CNNs), autoencoders trained exclusively on tritium data, and preliminary studies on boosted decision trees (BDTs). The CNN, trained on mixed signal/background datasets, demonstrates superior classification performance, while the autoencoder shows the potential of unsupervised, background-agnostic strategies when background characteristics are poorly defined. These results highlight the excellent sensitivity achievable thanks to the background rejection made possible by information-rich CCD data, paving the way for improved portable tritium monitoring.

Autoencoder↗
DOE OSTI2024

Use of tritium-rich fuel to improve the yield of layered deuterium/tritium inertial fusion capsules

In deuterium–tritium (DT) ice layered implosions, nearly all hot spot mass at peak burn comes from the dense fuel. Accurate prediction of the fuel mass ablation, including the enthalpy associated with mass inflow into the hot spot from the dense fuel, is essential to understanding the energetics and ignition of the hot spot in layered implosions. A recently published boundary layer analysis (Daughton et al., 2023) indicates a faster mass ablation rate than in previous analyses of layered implosions. Inclusion of this effect provides a better match to simulations and leads to a new ignition threshold where the temperature of the dense fuel plays a critical role. This analysis motivates possible new directions for improved capsule performance. Here, the authors present evidence in support of one such approach: the use of tritium-rich ice to decrease 14 MeV neutron scattering and heating of the dense fuel, resulting in less mass ablation and more robust burn of the hot spot. It is found from numerical simulations that despite a less favorable D:T ratio in the ice, the use of a 40:60 D:T ratio leads to an increase in capsule yield of 17% percent compared with that of a 50:50 D:T ratio fuel for capsules resembling those of the recent N210808 ignition experiment on the NIF (Abu-Shawareb et al., 2022) and an increase of 74% compared with that of a 60:40 D:T ratio fuel capsule. Finally, these results are potentially important for modeling all layered implosions, since some degree of DT fractionization may arise naturally during the beta layering process. In addition, this physics is important for the feasibility of high-gain capsule designs that seek to minimize tritium usage, as in some inertial fusion energy concepts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Machine Learning Prediction of Tritium‐Helium Groundwater Ages in the Central Valley, California, USA

Abstract Groundwater ages provides insight into recharge rates, flow velocities, and vulnerability to contaminants. The ability to predict groundwater ages based on more accessible parameters via Machine Learning (ML) would advance our ability to guide sustainable management of groundwater resources. In this study, ML models were trained and tested on a large data set of tritium concentrations and tritium‐helium groundwater ages from the California Central Valley, a large groundwater basin with complex land use, irrigation, and water management practices. The ML models were trained on 63 features, including location, well construction information, landscape characteristics, and climate variables, water chemistry, and stable isotopes. The Bagging regressor method can accurately classify (F1‐score = 0.91) groundwater samples as either modern or pre‐modern whereas the accuracy of the ML prediction of continuous tritium‐helium groundwater ages is limited and explains only of the variability in this data set. In general, ML groundwater age prediction relies mostly on features related to (a) the source of groundwater recharge, (b) contaminant history, (c) aquifer materials, (d) well construction, and (e) geochemical reactions along flow paths.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Recent progress in L-H transition studies at JET: Tritium, Helium, Hydrogen and Deuterium

In this report we present an overview of results from a series of L-H transition experiments undertaken at JET since the installation of the ITER-like-wall (JET-ILW), with Beryllium wall tiles and a Tungsten divertor. Tritium, Helium and Deuterium plasmas have been investigated. Initial results in Tritium show ohmic L-H transitions at low density and the power threshold for the L-H transition (P LH ) is lower in Tritium plasmas than in Deuterium ones at low densities, while we still lack contrasted data to provide a scaling at high densities. In Helium plasmas there is a notable shift of the density at which the power threshold is minimum (n e,min ) to higher values relative to Deuterium and Hydrogen references. Above n e,min (He) the L-H power threshold at high densities is similar for D and He plasmas. Transport modelling in slab geometry shows that in Helium neoclassical transport competes with interchange-driven transport, unlike in Hydrogen isotopes. Measurements of the radial electric field in Deuterium plasmas show that E r shear is not a good indicator of proximity to the L-H transition. Transport analysis of ion heat flux in Deuterium plasmas show a non-linearity as density is decreased below n e,min . Lastly, a regression of the JET-ILW Deuterium data is compared to the 2008 ITPA scaling law.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Vapor phase deposition of alumina on interior surfaces of tritium storage containers

Efficient tritium management and containment are critical challenges for nuclear fusion. To mitigate issues related to permeation into structural materials and isotopic exchange with protium, permeation barriers must be applied to the nonplanar internal surfaces of tritium handling components. In this study, we developed an atomic layer deposition (ALD) system to deposit films on canisters used to store and transport tritium. Growth conditions for deposition of Al 2 O 3 were mapped spatially along the length of a canister using silicon witness samples characterized by ellipsometry, atomic force microscopy, and x-ray reflectivity (XRR). We identified ALD process windows for growth at temperatures between 100 and 140 °C. Furthermore, we compared films grown on our Si witness samples to those grown on polished stainless steel 316 (SS316). X-ray photoelectron spectroscopy indicates two distinct chemical states for the alumina, while XRR confirms that the overall growth rate is similar to the 1.1 Å/cycle that we observed on the Si witness samples.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

First operation of the KATRIN experiment with tritium

The determination of the neutrino mass is one of the major challenges in astroparticle physics today. Direct neutrino mass experiments, based solely on the kinematics of β -decay, provide a largely model-independent probe to the neutrino mass scale. The Karlsruhe Tritium Neutrino (KATRIN) experiment is designed to directly measure the effective electron antineutrino mass with a sensitivity of 0.2 eV (90 % CL). In this work we report on the first operation of KATRIN with tritium which took place in 2018. During this commissioning phase of the tritium circulation system, excellent agreement of the theoretical prediction with the recorded spectra was found and stable conditions over a time period of 13 days could be established. These results are an essential prerequisite for the subsequent neutrino mass measurements with KATRIN in 2019.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Effect of surface oxides on tritium entrance and permeation in FeCrAl alloys for nuclear fuel cladding: a review

Abstract Iron-chromium-aluminum (FeCrAl) alloys are being considered for the cladding of uranium dioxide fuel in light water reactors (LWRs). FeCrAl alloys have good mechanical properties at temperatures of 300 °C and higher, and have superlative resistance to attack by steam at temperatures of up to 1000 °C and higher. A concern has been raised that the use of FeCrAl for cladding would result in a higher content of tritium in the reactor coolant as compared with the current system where the cladding is a zirconium based alloy. This review shows that the flux of tritium from the fuel rod cavities to the coolant across the fuel cladding wall will be greatly reduced by the presence of oxides on the surface of the cladding. The review of current literature and permeation data show that (a) protective oxides are expected to be present on both sides of the FeCrAl cladding, and (b) depending on the characteristics of these oxide layers it is reasonable to expect about two–three orders of magnitude reduction in tritium permeation, relative to the permeation response in clean, unoxidized condition for FeCrAl steels of interest, around 277 °C–377 °C temperatures.

Electrochemistry↗
DOE OSTI2020

SR19039 - All Metal Vacuum Scroll Pump Development for Tritium

Currently the Savannah River Site tritium gas processing mission relies on a pumping train combination of a Normetex scroll pump backed by a Metal Bellows MB-601 diaphragm pump. Both of these pumps have wetted components that are "all-metal" so that no polymers or elastomers that can degrade due to tritium gas exposure are exposed to the process fluid. Normetex, the original all-metal vacuum scroll pump manufacturer, has gone out of business. Another French based company, Eumeca, has "spun off" from the Normetex company and is now producing the original, 9 cfm all metal Normetex vacuum scroll pump. It should be noted that Normetex, now Eumeca, is currently the only supplier of a functional all metal vacuum scroll pump to meet the SRS tritium gas processing requirement.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗