Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TOVS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Comparison of the PLTEMP code flow instability predictions with measurements made with electrically heated channels for the advanced test reactor.

When the University of Missouri Research Reactor (MURR) was designed in the 1960s the potential for fuel element burnout by a phenomenon referred to at that time as 'autocatalytic vapor binding' was of serious concern. This type of burnout was observed to occur at power levels considerably lower than those that were known to cause critical heat flux. The conversion of the MURR from HEU fuel to LEU fuel will probably require significant design changes, such as changes in coolant channel thicknesses, that could affect the thermal-hydraulic behavior of the reactor core. Therefore, the redesign of the MURR to accommodate an LEU core must address the same issues of fuel element burnout that were of concern in the 1960s. The Advanced Test Reactor (ATR) was designed at about the same time as the MURR and had similar concerns with regard to fuel element burnout. These concerns were addressed in the ATR by two groups of thermal-hydraulic tests that employed electrically heated simulated fuel channels. The Croft (1964), Reference 1, tests were performed at ANL. The Waters (1966), Reference 2, tests were performed at Hanford Laboratories in Richland Washington. Since fuel element surface temperatures rise rapidly as burnout conditions are approached, channel surface temperatures were carefully monitored in these experiments. For self-protection, the experimental facilities were designed to cut off the electric power when rapidly increasing surface temperatures were detected. In both the ATR reactor and in the tests with electrically heated channels, the heated length of the fuel plate was 48 inches, which is about twice that of the MURR. Whittle and Forgan (1967) independently conducted tests with electrically heated rectangular channels that were similar to the tests by Croft and by Walters. In the Whittle and Forgan tests the heated length of the channel varied among the tests and was between 16 and 24 inches. Both Waters and Whittle and Forgan show that the cause of the fuel element burnout is due to a form of flow instability. Whittle and Forgan provide a formula that predicts when this flow instability will occur. This formula is included in the PLTEMP/ANL code.Error! Reference source not found. Olson has shown that the PLTEMP/ANL code accurately predicts the powers at which flow instability occurs in the Whittle and Forgan experiments. He also considered the electrically heated tests performed in the ANS Thermal-Hydraulic Test Loop at ORNL and report by M. Siman-Tov et al. The purpose of this memorandum is to demonstrate that the PLTEMP/ANL code accurately predicts the Croft and the Waters tests. This demonstration should provide sufficient confidence that the PLTEMP/ANL code can adequately predict the onset of flow instability for the converted MURR. The MURR core uses light water as a coolant, has a 24-inch active fuel length, downward flow in the core, and an average core velocity of about 7 m/s. The inlet temperature is about 50 C and the peak outlet is about 20 C higher than the inlet for reactor operation at 10 MW. The core pressures range from about 4 to about 5 bar. The peak heat flux is about 110 W/cm{sup 2}. Section 2 describes the mechanism that causes flow instability. Section 3 describes the Whittle and Forgan formula for flow instability. Section 4 briefly describes both the Croft and the Waters experiments. Section 5 describes the PLTEMP/ANL models. Section 6 compares the PLTEMP/ANL predictions based on the Whittle and Forgan formula with the Croft measurements. Section 7 does the same for the Waters measurements. Section 8 provides the range of parameters for the Whittle and Forgan tests. Section 9 discusses the results and provides conclusions. In conclusion, although there is no single test that by itself closely matches the limiting conditions in the MURR, the preponderance of measured data and the ability of the Whittle and Forgan correlation, as implemented in PLTEMP/ANL, to predict the onset of flow instability for these tests leads one to the conclusion that the same method should be able to predict the onset of flow instability in the MURR reasonably well.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

New insights into supradense matter from dissecting scaled stellar structure equations

The strong-field gravity in general relativity (GR) realized in neutron stars (NSs) renders the equation of state (EOS) P(ε) of supradense neutron star matter to be essentially nonlinear and refines the upper bound for Φ ≡ P/ε to be much smaller than the special relativity (SR) requirement with linear EOSs, where P and ε are respectively the pressure and energy density of the system considered. Specifically, a tight bound Φ ≲ 0.374 is obtained by perturbatively anatomizing the intrinsic structures of the scaled Tolman–Oppenheimer–Volkoff (TOV) equations without using any input nuclear EOS. New insights gained from this novel analysis provide EOS-model-independent constraints on the properties (e.g., density profiles of the sound speed squared s 2 = dP/dε and trace anomaly Δ = 1/3 – Φ) of cold supradense matter in NS cores. Using the gravity-matter duality in theories describing NSs, we investigate the impact of gravity on supradense matter EOS in NSs. In particular, we show that the NS mass M NS , radius R, and compactness ξ ≡ M NS /R scale with certain combinations of its central pressure and energy density (encapsulating its central EOS). Thus, observational data on these properties of NSs can straightforwardly constrain NS central EOSs without relying on any specific nuclear EOS model.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Magnetar Central Engine and Possible Gravitational Wave Emission of Nearby Short GRB 160821B

GRB 160821B is a short gamma-ray burst (SGRB) at redshift z = 0.16, with a duration less than 1 s and without any “extended emission” detected up to more than 100 s in both Swift /BAT and Fermi /GBM bands. An X-ray plateau with a sharp drop 180 s after the BAT trigger was observed with Swift /XRT. No supernova or kilo-nova signature was detected. Assuming the central engine of this SGRB is a recently born supra-massive magnetar, we can explain the SGRB as jet radiation and its X-ray plateau as the internal energy dissipation of the pulsar wind as it spins down. We constrain its surface magnetic field to B {sub p} < 3.12 × 10{sup 16} G and initial spin period to P{sub 0} < 8.5 × 10{sup −3} s. Its equation of state is consistent with the GM1 model with M{sub TOV} ∼ 2.37 M {sub ⊙} and ellipticity ϵ < 0.07. Its gravitational wave (GW) radiation may be detectable with the future Einstein Telescope, but is much weaker than the current detectability limit of Advanced LIGO. The GW radiation of such an event would be detectable by Advanced LIGO if it occurred at a distance of 100 Mpc ( z = 0.023).

79 ASTRONOMY AND ASTROPHYSICS↗

Kilonova Emissions from Neutron Star Merger Remnants: Implications for the Nuclear Equation of State

Multimessenger observations of binary neutron star mergers can provide valuable information on the nuclear equation of state (EOS). Here, we investigate the extent to which electromagnetic observations of the associated kilonovae allow us to place constraints on the EOS. For this, we use state-of-the-art three-dimensional general-relativistic magnetohydrodynamics simulations and detailed nucleosynthesis modeling to connect properties of observed light curves to properties of the accretion disk, and hence, the EOS. Using our general approach, we use multimessenger observations of GW170817/AT2017gfo to study the impact of various sources of uncertainty on inferences of the EOS. We constrain the radius of a 1.4M ⊙ neutron star to lie within 10.30 ≤ R 1.4 ≤ 13.0 km and the maximum mass to be M TOV ≤ 3.06M ⊙ .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Intercomparisons of temperature, density and wind measurements from in situ and satellite techniques

Atmospheric temperature, density, and wind data retrieved by various means are intercompared, covering the 1980-1984 period. The study encompasses such data sources as radiosonde, rocketsonde, in situ measurements, remote measurements, satellites, and NOAA-6 and 7 TOVS data. Larger temperature differences (up to 7-8 K) are noted for the rocketsonde/satellite comparison than for the radiosonde/satellite comparison (less than 1 K). The rocketsonde measurements were found to be internally consistent to less than 1 K up to 50 km and to less than 3 K up to 60 km. A general agreement of the density data obtained from small rocketsondes and large sounding rocket systems is suggested to be within 15 percent up to 85 km of altitude. The usefulness of intermixing the measurements of the various atmospheric parameters obtained from different instruments is emphasized, and some suggestions are made concerning the approaches to such intermixing.

Schmidlin, F. J.↗

A parameterization for downward longwave radiation from satellite meteorological data

An accurate and efficient parameterization is developed which computes clear-atmosphere downward longwave flux in terms of the water vapor burden and water-vapor-weighted average temperature of the surface-700 mb region. The parameterization is based on detailed radiative transfer calculations performed for a wide meteorological data base, consisting of 180 atmospheric models generated from climatological data and 106 radiosonde-measured models. The standard error of the computed fluxes was found to be about 4 percent of the mean value. It is also pointed out that strong heating or cooling of the surface, as shown by many TOVS data sets, caused larger errors in the computed fluxes.

Gupta, S. K.↗

A variational assimilation method for satellite and conventional data: Development of basic model for diagnosis of cyclone systems

A three-dimensional diagnostic model for the assimilation of satellite and conventional meteorological data is developed with the variational method of undetermined multipliers. Gridded fields of data from different type, quality, location, and measurement source are weighted according to measurement accuracy and merged using least squares criteria so that the two nonlinear horizontal momentum equations, the hydrostatic equation, and an integrated continuity equation are satisfied. The model is used to compare multivariate variational objective analyses with and without satellite data with initial analyses and the observations through criteria that were determined by the dynamical constraints, the observations, and pattern recognition. It is also shown that the diagnoses of local tendencies of the horizontal velocity components are in good comparison with the observed patterns and tendencies calculated with unadjusted data. In addition, it is found that the day-night difference in TOVS biases are statistically different (95% confidence) at most levels. Also developed is a hybrid nonlinear sigma vertical coordinate that eliminates hydrostatic truncation error in the middle and upper troposphere and reduces truncation error in the lower troposphere. Finally, it is found that the technique used to grid the initial data causes boundary effects to intrude into the interior of the analysis a distance equal to the average separation between observations.

Achtemeier, G. L.↗

Preparation of satellite soundings for insertion in a variational objective analysis model

The performance of a variational analysis model being developed at the Illinois State Water Survey, which allows blending of satellite and conventional soundings in a way which preserves the information content of both data sources, requires preparation of the input data before insertion into the model. Using operationally retrieved Tiros-N TOVS soundings and rawinsonde data, four procedures to prepare satellite soundings for model insertion are demonstrated: (1) determination and removal of biases, (2) determination of standard errors of the satellite temperatures to assist in the assignment of weights in the model, (3) conversion of layer mean temperatures to level temperatures, and (4) determination of the action necessary for correcting for the nonsynoptic nature of the satellite data.

Kidder, Stanley Q.↗

Pattern recognition analysis of satellite data for tropical cyclone motion and intensity forecasts

An objective empirical analysis technique is employed to investigate the extent to which satellite-obtained measurements (GOES IR and TOVS data) of a tropical cyclone and its environment can be used to predict cyclone motion. The paper describes the procedure used to process the satellite derived data in order to optimize their possible predictive value, the technique used in developing the regression algorithms, and the results of testing these algorithms using the Lachenbrach and Mickey (1968) procedure. The data were examined alone and in conjunction with available nonsatellite climatological and persistence variables for each storm. These predictors are similar to those used in the National Hurricane Center (NHC) CLIPPER model. The performances obtained using the Nichols Research Corporation CLIPPER model and the NHC CLIPPER model are compared, using homogeneous data sets for the comparisons. Major differences in results were found to be related to differences in the models.

Hunter, Herbert↗

GOES Satellite Observations for the FIRE/SRB Wisconsin Experiment Region from October 11 Through November 2, 1986

A map, concise tables, and satellite images are presented which show ground-site locations, GOES visible/infrared instrument counts above each site, and cloud spatial distribution for the experiment region from 11 October through 2 November 1986. The cloud images are presented near times of the afternoon NOAA-9 satellite overpasses in order to provide a qualitative aid in the interpretation of TOVS, AVHRR, and heat budget data during the FIRE/SRB experiment.

Whitlock, Charles H.↗

NASA follow-on to the Bangladesh Agro-Climatic Environmental Monitoring Project

The NASA responsibility and activities for the follow-on to the original Agro-Climatic Environmental Monitoring Project (ACEMP) which was completed during 1987 is described. Five training sessions which comprise the NASA ACEMP follow-on are: Agrometeorology, Meteorology of Severe Storms Using GEMPAK, Satellite Oceanography, Hydrology, and Meteorology with TOVS. The objective of the follow-on is to train Bangladesh Government staff in the use of satellite data for remote sensing applications. This activity also encourages the scientific connection between NASA/Goddard Space Flight Center and The Bangladesh Space and Remote Sensing Organization (SPARRSO).

Vermillion, C.↗

Low cost, microcomputer-based interactive analysis system for direct-reception and archived remote sensing data

A hardware/software system has been developed for use in meteorological field experiments and by developing countries which need low-cost remote sensing data analysis capabilities. The system can directly receive satellite transmissions of the AVHRR, TOVS, Argos, GOES, GMS, and Meteosat systems. Also, the system can process computer tapes from Landsat. Received data are ingested directly into the computer's disk storage, eliminating the need for a wide-band analog tape drive. Data may be interpreted in terms of cloud imagery, cloudtop temperature, sea surface temperature, vegetation index, and temperature/humidity profiles with overlays of geographic boundaries and latitude/longitude grids. The image processing, enhancement functions, and modeling capabilities of the system are discussed.

Vermillion, Charles H.↗

The wet tropospheric range correction - Product intercomparisons and the simulated effect for tropical Pacific altimeter retrievals

Four data sets used to correct satellite altimetry for the effects of tropospheric water vapor over the tropical Pacific Ocean are evaluated statistically, with a focus on the period 1979-1983. Satellite altimeter measurements are simulated by degrading model sea-level solutions with selected water-vapor data, and seasonal and interannual variations are investigated. The results are presented in extensive contour maps and characterized in detail. The standard deviation between two satellite-based data sets (Nimbus-7 SMMR and TOVS) was found to be 2-4 cm, while both the rms difference between seasonal cycles of the two sets and the difference between the mean fields were 1-2 cm. Larger differences (4-8 cm) were found between these data sets and those based on operational analyses (ECMWF and Fleet Numerical Oceanography Center). The maximum interannual anomaly in the water-vapor correction was 12 cm, for the eastern Pacific at the peak of the 1982-1983 ENSO event.

Zimbelman, Darrell F.↗

Comparison of NOAA-9 ERBE measurements with Cirrus IFO satellite and aircraft measurements

Earth Radiation Budget Experiment (ERBE) measurements onboard the NOAA-9 are compared for consistency with satellite and aircraft measurements made during the Cirrus Intensive Field Observation (IFO) of October 1986. ERBE scene identification is compared with NOAA-9 TIROS Operational Vertical Sounder (TOVS) cloud retrievals; results from the ERBE spectral inversion algorithms are compared with High resolution Interferometer Sounder (HIS) measurements; and ERBE radiant existance measurements are compared with aircraft radiative flux measurements.

Ackerman, Steven A.↗

Cloud altitude determination from infrared spectral radiances

The CO2 slicing method is generally recognized as the most accurate means of inferring cloud altitude from passive infrared radiance observations. The method is applicable to semi-transparent and broken clouds. During the cirrus FIRE and COHMEX field experiments, CO2 channel radiance data suitable for cloud altitude specification were achieved from moderate spectral resolution satellite sounders (NOAA-TOVS and GOES-VAS) and from a High spectral resolution Interferometer Spectrometer (HIS) flown on the NASA U2/ER2 aircraft. Also aboard the ER2 was a down-looking active lidar unit capable of providing cloud top pressure verifications with high accuracy. A third instrument, the Multispectral Atmospheric Mapping Sensor (MAMS) provided 50 meter resolution infrared window data which is used wtih radiosonde data to verify the heights of middle and low level clouds. Comparisons of lidar and MAMS/radiosonde ground truth cloud heights are made with those determined from: high resolution (0.5/cm) HIS spectra, HIS spectra degraded to the moderate resolution (15/cm) of the VAS/TOVS instruments, and spectrally averaged HIS radiances for individual pairs of VAS spectral channels. The results show that the best results are achieved from high resolution spectra; the RMS difference with the ground truth is 23 mb. The RMS differences between the infrared radiance determination and ground truth increase by 35 percent when the spectral resolution is degraded to the moderate spectral resolution of the VAS/TOVS instruments and by 52 to 183 percent, depending upon channel combinations, when only two spectral channels at VAS/TOVS spectral resolution are used.

Smith, William L.↗

Tropical Pacific moisture variability: Its detection, synoptic structure and consequences in the general circulation

Satellite data analysis tools are developed and implemented for the diagnosis of atmospheric circulation systems over the tropical Pacific Ocean. The tools include statistical multi-variate procedures, a multi-spectral radiative transfer model, and the global spectral forecast model at NMC. Data include in-situ observations; satellite observations from VAS (moisture, infrared and visible) NOAA polar orbiters (including Tiros Operational Satellite System (TOVS) multi-channel sounding data and OLR grids) and scanning multichannel microwave radiometer (SMMR); and European Centre for Medium Weather Forecasts (ECHMWF) analyses. A primary goal is a better understanding of the relation between synoptic structures of the area, particularly tropical plumes, and the general circulation, especially the Hadley circulation. A second goal is the definition of the quantitative structure and behavior of all Pacific tropical synoptic systems. Finally, strategies are examined for extracting new and additional information from existing satellite observations. Although moisture structure is emphasized, thermal patterns are also analyzed. Both horizontal and vertical structures are studied and objective quantitative results are emphasized.

Mcguirk, James P.↗

The role of global cloud climatologies in validating numerical models

Global maps of the monthly mean net upward longwave radiation flux at the ocean surface were obtained for April, July, October 1985 and January 1986. These maps were produced by blending information obtained from a combination of general circulation model cloud radiative forcing fields, the top of the atmosphere cloud radiative forcing from ERBE and TOVS profiles and sea surface temperature on ISCCP C1 tapes. The fields are compatible with known meteorological regimes of atmospheric water vapor content and cloudiness. There is a vast area of high net upward longwave radiation flux (greater than 80/sq Wm) in the eastern Pacific Ocean throughout most of the year. Areas of low net upward longwave radiation flux ((less than 40/sq Wm) are the tropical convective regions and extra tropical regions that tend to have persistent low cloud cover.The technique used relies on General Circulation Model simulations and so is subject to some of the uncertainties associated with the model. However, all input information regarding temperature, moisture, and cloud cover is from satellite data having near global coverage. This feature of the procedure alone warrants its consideration for further use in compiling global maps of longwave radiation.

HARSHVARDHAN↗

Longwave cloud radiative forcing at the surface from ISCCP-C1 data

A method for deriving one component of the total cloud forcing picture, namely, the LW cloud forcing at the surface, is presented. The method is based on a validated radiative transfer technique and utilizes meteorological data available from the International Satellite Cloud Climatology Project. The radiative transfer model used was validated earlier and the TOVS-derived temperature and water vapor data used were generally reasonable. On a monthly-average basis, random error was estimated to be in the 5-10 W/sq m range, but biases as large as 10-20 W/sq m can occur in some regions. The lack of information on cloud-base heights were found to be the largest source of errors in the models and the meteorological data.

Gupta, Shashi K.↗