Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THERMOPHYSICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Thermophysical Properties of Cold- and Vacuum Plasma-Sprayed Cu-Cr-X Alloys, NiAl and NiCrAlY Coatings I: Electrical and Thermal Conductivity, Thermal Diffusivity, and Total Hemispherical Emissivity

This two-part paper reports the thermophysical properties of several cold- and vacuum plasma-sprayed monolithic Cu- and Ni-based alloy coatings. Part I presents the electrical and thermal conductivity, thermal diffusivity, and total hemispherical emissivity data, while Part II reports the specific heat capacity data for these coatings. Metallic copper alloys and stoichiometric NiAl and NiCrAlY coatings were fabricated by either the cold spray or the vacuum plasma spray deposition processes for thermal property measurements between 77 and 1223 K. The temperature dependencies of the thermal conductivities, thermal diffusivities, electrical conductivities, and total hemispherical emissivities of these cold- and vacuum-sprayed monolithic coatings are reported in this paper. The electrical and thermal conductivity data correlate reasonably well for Cu-8%Cr-1%Al, Cu-23%Cr-5%Al, and NiAl in accordance with the Wiedemann–Franz (WF) law although a better fit is obtained using the Smith–Palmer relationship. The Lorentz numbers determined from the WF law are close to the theoretical value.

36 MATERIALS SCIENCE↗

Thermophysical Properties of High-Frequency Induction Heat Sintered Graphene Nanoplatelets/Alumina Ceramic Functional Nanocomposites

This paper concerns the thermophysical properties of high-frequency induction heat (HFIH) sintered alumina ceramic nanocomposites containing various graphene nanoplatelets (GNP) concentrations. The GNP/alumina nanocomposites demonstrated high densities, fine-grained microstructures, highest fracture toughness and hardness values of 5.7 MPa m{sup 1/2} and 18.4 GPa, which found 72 and 8%, superior to the benchmarked monolithic alumina, respectively. We determine the role of GNP in tuning the microstructure and inducing toughening mechanisms in the nanocomposites. The sintered monolithic alumina exhibited thermal conductivity value of 24.8 W/mK; however, steady drops of 2, 15 and 19% were recorded after adding respective GNP contents of 0.25, 0.5 and 1.0 wt.% in the nanocomposites. In addition, a dwindling trend in thermal conductions with increasing temperatures was recorded for all sintered samples. Simulation of experimental results with proven theoretical thermal models showed the dominant role of GNP dispersions, microstructural porosity, elastic modulus and grain size in controlling the thermal transport properties of the GNP/alumina nanocomposites. Thermogravimetric analysis showed that the nanocomposite with up to 0.5 mass% of GNP is thermally stable at the temperatures greater than 875 °C. The GNP/alumina nanocomposites owning a distinctive combination of mechanical and thermal properties are promising contenders for the specific components of the aerospace engine and electronic devices having contact with elevated temperatures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Approximation of refrigerant thermophysical properties using neural networks to speed up transient thermofluid simulations

Accurate and efficient evaluations of refrigerant thermophysical properties and their partial derivatives are essential for transient simulations of thermofluid systems, where several computations need to be executed at each integration time step. Since the utilization of an Equation of State for retrieving properties based on a pair of independent inputs typically involves numerical iterations in solution procedures, when the input variables differ from the refrigerant state variables employed in dynamic models, a variety of approaches including lookup table interpolation and curve fitting have been developed to explicitly approximate these properties based on the state variables, and consequently eliminate internal iterations. This paper presents an alternative method that exploits derivative-informed neural networks to model refrigerant properties explicitly from inputs of pressure and enthalpy, while ensuring consistent partial derivatives generated by differentiating the neural networks. Computational speed and accuracy of the proposed approach are demonstrated via transient simulations of a discretized heat exchanger model in Modelica, and comparisons against other property evaluation routines. Simulation results indicate that the proposed approach can realize a significant speedup with negligible discrepancies in predicted transients. The method is implemented in an open-source Modelica library.

Ma, Jiacheng↗

Thermophysical properties of sintered aluminum-silicon

The effect of silicon addition to aluminum on the thermophysical properties of Al was experimentally investigated. Thermal diffusivity, heat capacity, density, and thermal expansion of sintered Al-Si samples with Si content ranging 0-8 wt% were measured. For U-Mo/Al dispersion fuel for research reactors, an addition of Si (up to 8 wt% Si) to the Al matrix has been adopted as a method to reduce the formation of interaction layer between the U-Mo and the Al. In this study, the Si-added Al matrix was simulated by using a powder metallurgical method, in which an Al powder and a Si powder were mixed and sintered. All measured properties decreased with the addition of Si. The effect was most pronounced in thermal diffusivity while the decreases in heat capacity and density were relatively insignificant. The measured thermal conductivity from the present study was higher than those measured data for alloy samples available in the literature to the differences in the fabrication method. All measured data including this study, however, were lower than the prediction by the Bruggeman model. It is because the model assumes an ideal heat-transfer conditions such as spherical particles, homogeneous particle distribution, perfect bonding between Al and Si. (C) 2018 Elsevier B.V. All rights reserved.

Cho, Tae Won↗

Thermophysical and mechanical property assessment of UB 2 and UB 4 sintered via spark plasma sintering

Uranium diboride (UB 2 ) and uranium tetraboride (UB 4 ) are candidate constituents for multi-phase accident tolerant fuel due to their anticipated high thermal conductivity. These fuels have high uranium density that contributes to fission, and by tailoring the ratio of 10 B/ 11 B, can also act as an integrated burnable poison. Understanding the thermophysical and mechanical properties of uranium borides, for which only limited data are available in the literature, is of importance to determine their accident tolerance. In this work UB 2 and UB 4 have been synthesized via arc melting and sintered to high densities via spark plasma sintering (SPS). High density samples, >90% theoretical density, were used to measure the thermal diffusivity and thermal expansion of UB 2 and UB 4 and, in conjunction with specific heat literature data, their thermal conductivities were calculated from 298 to 1773 K. Additionally, resonance ultrasound spectroscopy (RUS) and nanoindentation were performed to investigate the mechanical properties of the uranium borides. Our results are discussed in the context of available literature. Both UB 2 and UB 4 exhibit thermal conductivities higher than that of UO 2 , with UB 2 having the highest. The thermal conductivity of UB 2 increases with temperature above 874 K, while for UB 4 there is a linear increase over the entire measured range. X-ray diffraction (XRD) results indicate that impurity phases were present in the fabricated materials, which could explain why literature density functional theory (DFT) results predict higher values. As a result, this suggests that if impurity phases or any microstructural defects can be eliminated then the thermal conductivity can be further increased.

36 MATERIALS SCIENCE↗

Thermophysical properties of high-density, sintered monoliths of yttrium dihydride in the range 373–773 K

Yttrium dihydride is a promising nuclear reactor moderator for high-temperature, thermal micro-reactors due to its ability to retain hydrogen to high temperatures while having a relatively low impact on neutron economy. However, it is difficult to fabricate yttrium dihydride in high-density, near net-shape monoliths for moderator applications due to challenges associated with the hydrogen absorption process. Here, high-density monoliths of yttrium dihydride were prepared by powder metallurgical methods. The lattice strain and thermal expansion coefficient were measured using neutron diffraction of powders of directly-hydrided yttrium, while the molar heat capacity and thermal diffusivity of sintered yttrium dihydride were measured using differential scanning calorimetry (DSC) and laser flash analysis (LFA), respectively. The molar heat capacity of yttrium dihydride was also calculated using density functional theory (DFT) for comparison. These parameters were used to then calculate the thermal conductivity and resistivity of yttrium dihydride as a function of temperature. The thermophysical properties of materials produced by both methods were observed to be consistent with the values from literature for yttrium dihydride. Due to the novelty of producing yttrium dihydride by powder metallurgical methods, this result indicated that the sintered monoliths were of high quality and that powder metallurgy is a viable method for large-scale production of yttrium dihydride monoliths for nuclear reactor moderator applications.

36 MATERIALS SCIENCE↗

Thermophysical properties of U 3 Si 5 to 1773 K

Possible use of U 3 Si 5 as a nuclear reactor fuel requires knowledge of its thermophysical properties as a function of temperature. While limited data is available for U–Si compounds containing higher uranium densities, no investigations of U 3 Si 5 have been presented in the literature to date. Here, high purity U 3 Si 5 was fabricated to facilitate a set of experiments to determine the coefficient of thermal expansion, heat capacity, thermal diffusivity, and thermal conductivity from room temperature to 1773 K. Each measurement on nearly stoichiometric U 3 Si 5 showed the existence of a phase transformation at 723 K, which is not consistent with the most recently published phase diagram.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermophysical properties of U 3 Si 2 to 1773K

Use of U 3 Si 2 in nuclear reactors requires accurate thermophysical property data to capture heat transfer within the core. Compilation of the limited previous research efforts focused on the most critical property, thermal conductivity, reveals extensive disagreement. Assessment of this data is challenged by the fact that the critical structural and chemical details of the material used to provide historic data is either absent or confirms the presence of significant impurity phases. This study was initiated to fabricate high purity U 3 Si 2 to quantify the coefficient of thermal expansion, heat capacity, thermal diffusivity, and thermal conductivity from room temperature to 1773 K. Here, the datasets provided in this manuscript will facilitate more detailed fuel performance modeling to assess both current and proposed reactor designs that incorporate U 3 Si 2 .

36 MATERIALS SCIENCE↗

Corrigendum to “Thermophysical properties of U 3 Si 2 to 1773 K”

An error was discovered by the authors in the calculation of thermal diffusivity in “Thermophysical properties of U 3 Si 2 to 1773 K”. The error was caused by operator error in entry of parameters used to fit the temperature rise versus time model necessary to calculate the thermal diffusivity. Lastly, this error propagated to the calculation of thermal conductivity, leading to values that were 18%–28% larger along with the corresponding calculated Lorenz values.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermophysical properties of heat-treated U-7Mo/Al dispersion fuel

In this study, the effects of interaction layer (IL) on thermophysical properties of U-7Mo/Al dispersion fuel were examined. Microstructural analyses revealed that ILs were formed uniformly on U-Mo particles during heating of U-7Mo/Al samples. The IL volume fraction was measured by applying image analysis methods. The uranium loadings of the samples were calculated based on the measured meat densities at 298 K. The density of the IL was estimated by using the measured density and IL volume fraction. Thermal diffusivity and heat capacity of the samples after the heat treatment were measured as a function of temperature and volume fractions of U-Mo and IL. The thermal conductivity of IL-formed U-7Mo/Al was derived by using the measured thermal diffusivity, heat capacity, and density. The thermal conductivity obtained in the present study was lower than that predicted by the modified Hashin–Shtrikman model due to the theoretical model’s inability to consider the thermal resistance at interfaces between the meat constituents.

density↗

Thermophysical properties of urania-zirconia (U,Zr)O 2 mixed oxides by molecular dynamics

Molecular dynamics simulations were used to investigate the thermophysical properties of (U,Zr)O 2 between 300 K and 3500 K. For compositions with <25% UO 2 the tetragonal phase is stable but beyond 25% the cubic fluorite phase becomes stable for all temperatures. Thermal expansion, heat capacity and thermal conductivity have been predicted. The addition of ZrO 2 to UO 2 causes a reduction in thermal conductivity however this effect decreases with increased temperature and, beyond 1000 K, becomes insignificant. Thermal expansion of (U,Zr)O 2 mixtures with >25% UO 2 , which are in the cubic fluorite phase, is similar to that of the pure UO 2 end member. A superionic transition is observed in cubic (U,Zr)O 2 at temperatures between 1500 K and 3000 K, occurring at progressively lower temperatures with increasing ZrO 2 content. Here, the heat capacity of these mixed oxides increases from 80 J/mol.K up to 130 J/mol.K at temperatures relevant to accident conditions, possibly retarding heating in fuels with a significant pellet-clad bonding layer.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Mechanical and Thermophysical properties of low enriched uranium-10wt% molybdenum rolled foils

In this study, low-enriched (~19.75% 235 U) U-10Mo(wt%) foils were evaluated for both mechanical and thermophysical properties to establish baseline characteristics prior to irradiation testing. Cast U-10Mo ingots were sequentially hot and cold rolled to two different final foil thicknesses, resulting in different levels of cold work being present in the finished foils. The mechanical response of the U-10Mo foils was evaluated in the temperature range of 293–623 K. Increasing test temperatures resulted in decreases of both yield and ultimate tensile strength. Comparison of results to earlier work performed on depleted U-10Mo rolled foils indicates that the material in this study has lower strength and increased ductility. However, a comparison of the two different foil thicknesses in this study found that they were nearly identical in yield and ultimate tensile strength, differing by only 10–20 MPa (<2%). Thermal conductivity was calculated from the measurements of specific heat, linear thermal expansion, and thermal diffusivity from 323 to 1273 K on both thicknesses of the foils. These data were approximately 5–10% lower than previously published data above 573 K and were similar to data for temperature ranges below 573 K. Differences are likely related to differences in grain size and/or impurity content and variation in fabrication history.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Molecular Simulations of the Thermophysical Properties of Polyethylene Glycol Siloxane (PEGS) Solvent for Precombustion CO 2 Capture

Here, the thermophysical properties for neat polyethylene glycol siloxane solvent (PEGS) along with CO 2 , H 2 , H 2 O, and H 2 S gas absorption in PEGS at 298–373 K were investigated via molecular simulations. The predicted neat PEGS density, heat capacity, surface tension, and CO 2 and H 2 solubilities in PEGS solvent agree reasonably well with the experimental data, with typical differences of 0.8–20%, while the predicted PEGS solvent viscosity is 1.7–2.5 times larger than the experimental data. Gas solubility in PEGS at 298 K decreases in the following order, H 2 O (31000) > H 2 S (230) > CO 2 (33) > H 2 (1), which follows the same order as the gas–PEGS interaction. In contrast, gas diffusivity in PEGS at 298 K decreases in an opposite way, H 2 (1) > CO 2 (0.22) ≈ H 2 S (0.12) > H 2 O (0.018). The numbers in parentheses are the corresponding values relative to H 2 . Compared to the widely studied poly(dimethylsiloxane) (PDMS) solvent, PEGS is more hydrophilic due to its stronger interaction with H 2 O and fewer branched –CH 3 groups, which in turn leads to fewer hydrophobic pockets. The CO 2 /H 2 solubility selectivity in PEGS is larger than that in PDMS due to a stronger interaction with CO 2 in PEGS. Finally, it was found that CO 2 absorption in PEGS could significantly improve the CO 2 –PEGS solution dynamics by 5–6 times, resulting in a decrease in solution viscosity and increase in diffusivity. These CO 2 absorption effects are due to solution volume expansion upon CO 2 absorption compared to the neat PEGS solvent volume and the possibility that CO 2 acts as a “lubricant” to decrease the solvent–solvent interaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interface and Thermophysical Properties of R 32 Refrigerant

Driven by the urgent demand for efficient cooling in microelectronics and advanced thermal management systems, difluoromethane (R32/CH 2 F 2 ) has emerged as a promising candidate owing to its favorable thermophysical properties, including high heat transfer efficiency and low viscosity. While bulk properties such as density, viscosity, and thermal conductivity have been widely studied, interfacial properties, including surface tension and interfacial thickness, remain comparatively underexplored, despite their importance in phase-transition dynamics. Here, we perform molecular dynamics (MD) simulations from 180 to 300 K using an optimized transferable force field for fluoropropenes with enhanced electrostatics to assess both bulk and interfacial behavior of R32. Simulations reproduced density within ±2.1%, viscosity within 3.05%, and thermal conductivity within 7.41% of NIST reference data. Heat capacities (C p and C v ) were predicted within 5%. For interfacial properties, surface tension trends were reproduced within 13.58% deviation, and the vapor–liquid coexistence curve closely matched reference data, yielding a critical temperature of 345.7 K (1.6% deviation) and a critical density of 0.397 g/cm 3 (6.4% deviation). Importantly, the vapor–liquid interface exhibited pronounced temperature-dependent broadening across the 180–290 K range. This behavior correlates with increasing molecular kinetic energy, reduction in intermolecular cohesive interactions, and a progressive loss of preferential dipole alignment, which collectively enhance thermal fluctuation amplitudes at elevated temperatures. These validated results provide predictive molecular-level insights, particularly for interfacial properties that remain less characterized. By reducing property prediction errors in key parameters such as critical temperature, this work provides reliable inputs for heat-exchanger and system models. Such correlations can support optimized component sizing, improved performance, and reduced refrigerant charge. Beyond R32, the methodology offers a transferable framework for blended and next-generation low-GWP refrigerants, contributing to sustainable thermal management aligned with the 2027 EU F-Gas regulation and 2030 Kigali Amendment.

Fluids↗

Thermophysical Properties of Nanoparticle-Enhanced Ionic Liquids (NEILs) Heat-Transfer Fluids

An experimental investigation was completed on nanoparticle enhanced ionic liquid heat transfer fluids as an alternative to conventional organic based heat transfer fluids (HTFs). These nanoparticle-based HTFs have the potential to deliver higher thermal conductivity than the base fluid without a significant increase in viscosity at elevated temperatures. The effect of nanoparticle morphology and chemistry on thermophysical properties was examined. Whisker shaped nanomaterials were found to have the largest thermal conductivity temperature dependence and were also less likely to agglomerate in the base fluid than spherical shaped nanomaterials.

42 ENGINEERING↗

Thermophysical properties and oxygen transport in (Th x ,Pu 1-x )O 2

Using Molecular Dynamics, this paper investigates the thermophysical properties and oxygen transport of (Th x ,Pu 1–x )O 2 (0 ≤ x ≤ 1) between 300–3500 K. Specifically, the superionic transition is investigated and viewed via the thermal dependence of lattice parameter, linear thermal expansion coefficient, enthalpy and specific heat at constant pressure. Oxygen diffusivity and activation enthalpy are also investigated. Below the superionic temperature an increase of oxygen diffusivity for certain compositions of (Th x ,Pu 1–x )O 2 compared to the pure end members is predicted. Oxygen defect formation enthalpies are also examined, as they underpin the superionic transition temperature and the increase in oxygen diffusivity. The increase in oxygen diffusivity for (Th x ,Pu 1–x )O 2 is explained in terms of lower oxygen defect formation enthalpies for (Th x ,Pu 1–x )O 2 than PuO 2 and ThO 2 , while links are drawn between the superionic transition temperature and oxygen Frenkel disorder.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theoretical investigation of thermophysical properties in two-temperature argon-helium thermal plasma

The thermophysical properties of argon-helium thermal plasma have been studied in the temperature range from 5000 to 40 000 K at atmospheric pressure in local thermodynamic equilibrium and non-local thermodynamic equilibrium conditions. Two cases of thermal plasma considered are (i) ground state plasma in which all the atoms and ions are assumed to be in the ground state and (ii) excited state plasma in which atoms and ions are distributed over various possible excited states. The influence of electronic excitation and non-equilibrium parameter {theta} = T{sub e}/T{sub h} on thermodynamic properties (composition, degree of ionization, Debye length, enthalpy, and total specific heat) and transport properties (electrical conductivity, electron thermal conductivity, and thermal diffusion ratio) have been studied. Within the framework of Chapman-Enskog method, the higher-order contributions to transport coefficient and their convergence are studied. The influence of different molar compositions of argon-helium plasma mixture on convergence of higher-orders is investigated. Furthermore, the effect of different definitions of Debye length has also been examined for electrical conductivity and it is observed that electrical conductivity with the definition of Debye length (in which only electrons participate in screening) is less than that of the another definition (in which both the electrons and ions participate in screening) and this deviation increases with electron temperature. Finally, the effect of lowering of ionization energy is examined on electron number density, Debye length, and higher-order contribution to electrical conductivity. It is observed that the lowering of the ionization energy affects the electron transport-properties and consequently their higher-order contributions depending upon the value of the non-equilibrium parameter {theta}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermophysical properties of nitrogen plasmas under thermal equilibrium and non-equilibrium conditions

Calculated thermophysical properties of nitrogen plasmas in and out of thermal equilibrium are presented. The cut-off of the partition functions due to the lowering of the ionization potential has been taken into account, together with the contributions from different core excited electronic states. The species composition and thermodynamic properties are determined numerically using the Newton-Raphson iterative method, taking into account the corrections due to Coulomb interactions. The transport properties including diffusion coefficient, viscosity, thermal conductivity, and electrical conductivity are calculated using the most recent collision interaction potentials by adopting Devoto's electron and heavy particle decoupling approach, expanded to the third-order approximation (second-order for viscosity) in the framework of Chapman-Enskog method. Results are presented in the pressure range of 0.1 atm-10 atm and in electron temperature range from 300 to 40 000 K, with the ratio of electron temperature to heavy-particle temperature varied from 1 to 20. Results are compared with those from previous works, and the influences of different definitions of the Debye length are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗