Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Superconductive tunneling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Spectroscopic evidence for the direct involvement of local moments in the pairing process of the heavy-fermion superconductor CeCoIn 5

The microscopic mechanism for electron pairing in heavy-fermion superconductors remains a major challenge in quantum materials. Some form of magnetic mediation is widely accepted with spin fluctuations as a prime candidate. A novel mechanism, “composite pairing” based on the cooperative two-channel Kondo effect directly involving the f -electron moments, has also been proposed for some heavy-fermion compounds including CeCoIn 5 . The origin of the spin-resonance peak observed in neutron-scattering measurements on CeCoIn 5 is still controversial and the corresponding hump-dip structure in the tunneling conductance is missing. This is in contrast to the cuprate and Fe-based high-temperature superconductors, where both characteristic signatures are observed, indicating spin fluctuations are likely involved in the pairing process. In this study, we report results from planar tunneling spectroscopy along three major crystallographic orientations of CeCoIn 5 over wide ranges of temperature and magnetic field. The pairing gap opens at T p ~ 5 K , well above the bulk T c = 2.3 K , and its directional dependence is consistent with d x 2 – y 2 symmetry. With increasing magnetic field, this pairing gap is suppressed as expected but, intriguingly, a gaplike structure emerges smoothly, increasing linearly up to the highest field applied. This field-induced gaplike feature is only observed below T p . The concomitant appearance of the pairing gap and the field-induced gaplike feature, along with its linear increase with field, indicates that the f -electron local moments are directly involved in the pairing process in CeCoIn 5 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Band structure, superconductivity, and polytypism in AuSn 4

The orthorhombic compound AuSn 4 is compositionally similar to the Dirac node arc semimetal PtSn 4 . AuSn 4 is, contrary to PtSn 4 , superconducting with a critical temperature of T c = 2.35 K. Recent measurements present indications for quasi-two-dimensional superconducting behavior in AuSn 4 . Here we present measurements of the superconducting density of states and the band structure of AuSn 4 through scanning tunneling microscopy and angular resolved photoemission spectroscopy (ARPES). The superconducting gap values in different portions of the Fermi surface are spread around Δ 0 = 0.4 meV, which is close to but somewhat larger than Δ = 1.76k B T c expected from BCS theory. We observe superconducting features in the tunneling conductance at the surface up to temperatures about 20% larger than bulk T c . The band structure calculated with density functional theory follows well the results of ARPES. The crystal structure presents two possible stackings of Sn layers, giving two nearly degenerate polytypes. This makes AuSn 4 a rather unique case with a three-dimensional electronic band structure but properties ressembling those of low-dimensional layered compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Junctions and Superconducting Symmetry in Twisted Bilayer Graphene

Junctions provide a wealth of information on the symmetry of the order parameter of superconductors. Here, we analyze junctions between a scanning tunneling microscope (STM) tip and superconducting twisted bilayer graphene (TBG) and TBG Josephson junctions (JJs). We compare superconducting phases that are even or odd under valley exchange (s- or ƒ-wave). The critical current in mixed (s and ƒ) JJs strongly depends on the angle between the junction and the lattice. In STM-TBG junctions, due to Andreev reflection, the ƒ-wave leads to a prominent peak in subgap conductance, as seen in experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1992

International Symposium on Magnetic Suspension Technology, Part 1

The goal of the symposium was to examine the state of technology of all areas of magnetic suspension and to review related recent developments in sensors and controls approaches, superconducting magnet technology, and design/implementation practices. The symposium included 17 technical sessions in which 55 papers were presented. The technical session covered the areas of bearings, sensors and controls, microgravity and vibration isolation, superconductivity, manufacturing applications, wind tunnel magnetic suspension systems, magnetically levitated trains (MAGLEV), space applications, and large gap magnetic suspension systems.

Nelson J Groom↗
NASA NTRS1992

International Symposium on Magnetic Suspension Technology, Part 2

In order to examine the state of technology of all areas of magnetic suspension and to review related recent developments in sensors and controls approaches, superconducting magnet technology, and design/implementation practices, a symposium was held. The proceedings are presented. The sessions covered the areas of bearings, sensors and controls, microgravity and vibration isolation, superconductivity, manufacturing applications, wind tunnel magnetic suspension systems, magnetically levitated trains (MAGLEV), space applications, and large gap magnetic suspension systems.

Groom, Nelson J.↗
NASA NTRS1996

Submillimeter-Wave Receiver Containing An SIS Mixer

Submillimeter-wave heterodyne receiver designed to operate at input frequencies in range of 480 to 650 GHz. Intended for use in radio astronomy at frequency of 547 or 626 GHz. Heart of receiver is waveguide mixer that includes adjustable backshort and electric-field-plane tuner. Mixing element high-current-density superconductor/insulator/superconductor (SIS) tunnel junction integrated with superconductive microstrip radio-frequency circuit that tunes out capacitance of junction; matching complex impedance of junction to available tuning range of waveguide mount.

Febvre, Pascal↗
DOE OSTI2024

The Design of B1APF Dipole for the EIC

Brookhaven National Laboratory has been chosen to host the Electron-Ion Collider (EIC). Part of this is to install an additional electron ring to the existing RHIC tunnel. The electron hadron Interaction Region (IR) will host nine superconducting magnets on the forward side and six superconducting magnets on the rear side of the Interaction Point (IP). B1APF dipole is the last magnet of the near IR in the outgoing hadron direction. Further, the magnet has a physical aperture of 370 mm diameter and is 1.5 m long. This large aspect ratio makes this magnet particularly challenging. It is a collared magnet and uses a NbTi Rutherford cable with 15.1 mm X 1.9 mm. It is expected to operate at a maximum current of 13400 A at 2 K. The required integrated dipole field is 4.05 Tm. This paper discusses the current design status of the B1ApF dipole and presents the electromagnetic analysis and thermal quench propagation analysis.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Unraveling Enhanced Superconductivity in Single-Layer FeSe through Substrate Surface Terminations

Single-layer FeSe on SrTiO 3 (001) substrates shows a superconducting transition temperature much higher than that of bulk FeSe, which has been attributed to factors such as electron doping, interfacial electron–phonon coupling, and electron correlations. To pinpoint the primary driver, we grew single-layer FeSe films on SrTiO 3 (001) substrates with coexisting TiO 2 and SrO surface terminations. Scanning tunneling spectroscopy revealed a larger superconducting gap (17.0 meV) on the TiO 2 -termination than on the SrO-termination (10.5 meV). Tunneling spectroscopy also showed a larger work function on the SrO surface, resulting in reduced charge transfer to FeSe, as confirmed by angle-resolved photoemission spectroscopy. Scanning transmission electron microscopy further revealed distinctive interfacial atomic-scale structures, with the Se–Fe–Se tetrahedral angle changing from 109.5° on the SrO-termination to 104.9° on the TiO 2 -termination. Compared to dynamical mean field theory calculations, our results indicate that enhanced superconductivity in single-layer FeSe/TiO 2 arises from optimal electron correlations, in addition to sufficient charge transfer from the substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Superconducting Density of States of PtPb 4

PtPb 4 is a type II superconductor with a bulk critical temperature T c ≈ 3 K and an upper critical field of H c2 = 0.36 T. PtPb 4 is related to non-superconducting PtSn 4 , which presents nodal arc states at the surface. Here, we measure the superconducting density of states of PtPb 4 using millikelvin Scanning Tunneling Microscopy (STM). We observe a fully opened superconducting gap of Δ = 0.48 meV similar to expectations from Bardeen, Cooper and Schrieffer (BCS) theory (Δ 0 = 1.76k B T c = 0.49 meV). Measurements under magnetic fields applied perpendicular to the surface show a spatially inhomogeneous gap structure, presenting superconducting signatures at fields as high as 1.5 T, significantly above H c2 = 0.36 T. On some locations, we find that the superconducting density of states does not vanish above T c . We can find signatures of a superconducting gap up to 5 K. We discuss possible reasons for the observation of superconducting properties above T c and H c2 , emphasizing the role played by structural defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Possible unconventional surface superconductivity in the half-Heusler compound YPtBi

Here, we report an extensive study of the noncentrosymmetric half-Heusler superconductor YPtBi, revealing an unusual relation between bulk superconductivity and the possible appearance of surface superconductivity on the (111) oriented surface, at temperatures up to three times the bulk transition temperature. Transport measurements confirmed the low carrier density of the material and its bulk superconducting transition, which was also observed in ac susceptibility through mutual inductance (MI) measurements. However, a weak signature of superconductivity in the MI measurements appeared much above the bulk transition temperature, which was further observed in scanning tunneling spectroscopy, pointing to a possible surface superconducting state. Polar Kerr effect measurements suggest that while the bulk superconductor may exhibit an unusual nodal superconducting state, only the surface state breaks time reversal symmetry. Complementary tunneling measurements on LuPtBi are used to establish the observations on YPtBi, while density-functional theory calculations may shed light on the origin of this unusual surface state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1973

Electromagnetic position sensor for a magnetically supported model in a wind tunnel

An investigation was undertaken to determine the feasibility of using superconducting force-producing coils for positioning a model in a wind tunnel. The cryostat containing the forcing coils surrounded the test section of the tunnel, thus favoring an electromagnetic position sensor. Another reason favoring this choice was the fact that the performance of an electromagnetic sensor is essentially unaffected by the shape of the model.

Towler, W. R.↗
DOE OSTI2021

Evidence for unconventional superconductivity in twisted bilayer graphene

The emergence of superconductivity and correlated insulators in magic-angle twisted bilayer graphene (MATBG) has raised the intriguing possibility that its pairing mechanism is distinct from that of conventional superconductors, as described by the Bardeen–Cooper–Schrieffer (BCS) theory. However, recent studies have shown that superconductivity persists even when Coulomb interactions are partially screened5. This suggests that pairing in MATBG might be conventional in nature and a consequence of the large density of states of its flat bands. In this work, we combine tunnelling and Andreev reflection spectroscopy with a scanning tunnelling microscope to observe several key experimental signatures of unconventional superconductivity in MATBG. We show that the tunnelling spectra below the transition temperature T c are inconsistent with those of a conventional s-wave superconductor, but rather resemble those of a nodal superconductor with an anisotropic pairing mechanism. We observe a large discrepancy between the tunnelling gap Δ T , which far exceeds the mean-field BCS ratio (with 2Δ T /k B T c ~ 25), and the gap Δ AR extracted from Andreev reflection spectroscopy (2Δ AR /k B T c ~ 6). The tunnelling gap persists even when superconductivity is suppressed, indicating its emergence from a pseudogap phase. Moreover, the pseudogap and superconductivity are both absent when MATBG is aligned with hexagonal boron nitride. These findings and other observations reported here provide a preponderance of evidence for a non-BCS mechanism for superconductivity in MATBG.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Evidence for chiral superconductivity on a silicon surface

Tin adatoms on a Si(111) substrate with a one-third monolayer coverage form a two-dimensional triangular lattice with one unpaired electron per site. These electrons order into an antiferromagnetic Mott-insulating state, but doping the Sn layer with holes creates a two-dimensional conductor that becomes superconducting at low temperatures. Although the pairing symmetry of the superconducting state is currently unknown, the combination of repulsive interactions and frustration inherent in the triangular adatom lattice opens up the possibility of a chiral order parameter. Here we study the superconducting state of Sn/Si(111) using scanning tunneling microscopy, scanning tunneling spectroscopy and quasiparticle interference imaging. Here we find evidence for a doping-dependent superconducting critical temperature with a fully gapped order parameter, the presence of time-reversal symmetry breaking and a strong enhancement in zero-bias conductance near the edges of the superconducting domains. Although each individual piece of evidence could have a more mundane interpretation, our combined results suggest the possibility that Sn/Si(111) is an unconventional chiral d-wave superconductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

How magnetic field can transform a superconductor into a Bose metal

Abstract We discuss whether a simple theory of superconducting stripes coupled by Josephson tunneling can describe a metallic transport, once the coherent tunneling of pairs is suppressed by the magnetic field. For a clean system, the conclusion we reached is negative: the excitation spectrum of preformed pairs consists of Landau levels, and once the magnetic field exceeds a critical value, the transport becomes insulating. As a speculation, we suggest that a Bose metal can exist in disordered systems provided that the disorder is strong enough to localize some pairs. Then the coupling between propagating and localized pairs broadens the Landau levels, resulting in a metallic conductivity. Our model respects the particle–hole symmetry, which leads to a zero Hall response. And intriguingly, the resulting anomalous metallic state has no Drude peak and the spectral weight of the cyclotron resonance vanishes at low temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Noncontact Andreev Reflection as a Direct Probe of Superconductivity on the Atomic Scale

Direct detection of superconductivity has long been a key strength of point-contact Andreev reflection. However, its applicability to atomic-scale imaging is limited by the mechanical contact of the Andreev probe. To this end, we present a new method to probe Andreev reflection in a tunnel junction, leveraging tunneling spectroscopy and junction tunability to achieve quantitative detection of Andreev scattering. This method enables unambiguous assignment of superconducting origins of current-carrying excitations, as well as detection of higher order Andreev processes in atomic-scale junctions. Herein, we furthermore revealed distinct sensitivity of Andreev reflection to natural defects, such as step edges, even in classical superconductors. The methodology opens a new path to nano- and atomic-scale imaging of superconducting properties, including disordered superconductors and proximity to phase transitions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Design of the Fermilab Pre-Series Cold Mass for the HL-LHC Accelerator Upgrade Project

Here as part of the U.S. contribution to the HL-LHC Accelerator Upgrade Project (AUP), Fermilab is designing and building cold masses suitable for use in the LHC interaction regions. The cold mass provides a vacuum-tight helium enclosure for the magnets. Two magnets are aligned both axially and in cross section at Fermilab based on survey and warm magnetic measurements. Bus work and instrumentation is added. A welded stainless steel vacuum-tight shell surrounds the two magnets, and the structure is prepared for insertion into the cryostat. This paper summarizes the design of the cold mass including alignment, bus work, weld details, and instrumentation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Atomic-scale frustrated Josephson coupling and multicondensate visualization in FeSe

In a Josephson junction involving multiband superconductors, competition between interband and interjunction Josephson couplings gives rise to frustration and spatial disjunction of superfluid densities among superconducting condensates. Such frustrated coupling manifests as the quantum interference of Josephson currents from different tunnelling channels and becomes tunable if channel transparency can be varied. To explore these unconventional effects in the prototypical s ± -wave superconductor FeSe, we use atomic-resolution scanned Josephson tunnelling microscopy for condensate-resolved imaging and junction tuning—capabilities unattainable in macroscopic Josephson devices with fixed characteristics. We quantitatively demonstrate frustrated Josephson tunnelling by examining two tunnelling inequalities. The relative transparency of two parallel tunnelling pathways is found tunable, revealing a tendency towards a 0–π transition with decreasing scanned Josephson tunnelling microscopy junction resistance. Here, the simultaneous visualization of both superconducting condensates reveals anticorrelated superfluid modulations, highlighting the role of interband scattering. Our study establishes scanned Josephson tunnelling microscopy as a powerful tool enabling new research frontiers of multicondensate superconductivity.

Scanning probe microscopy↗