Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Substitution reactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Imide Oligomers Endcapped with Phenylethynl Phthalic Anhydrides and Polymers Therefrom

Controlled molecular weight phenylethynyl terminated imide oligomers (PETIs) have been prepared by the cyclodehydration of precursor phenylethynyl terminated amic acid oligomers. Amino terminated amic acid oligomers are prepared from the reaction of dianhydride(s) with an excess of diamine(s) and subsequently endcapped with phenylethynyl phthalic anhydride(s) (PEPA). The polymerizations are carried out in polar aprotic solvents such as N-methyl-2-pyrrolidinone or N.N-dimethylacetamide under nitrogen at room temperature. The amic acid oligomers are subsequently cyclodehydrated either thermally or cheznicauy to the corresponding imide oligomers. Direct preparation of PETIs from the reaction of dianhydxide(s) with an excess of diamine(s) and endcapped with phenylethynyl phthalic anhydride(s) has been performed in m-cresol. Phenylethynyl phthalic anhydrides are synthesized by the palladium catalyzed reaction of phenylacetylene with bromo substituted phthalic anhydrides in triethylamine. These new materials exhibit excellent properties and are potentially useful as adhesives, coatings, films, moldings and composite matrices.

Hergenrother, Paul M.↗
NASA NTRS1996

Imide oligomers endcapped with phenylethynyl phthalic anhydrides and polymers therefrom

Controlled molecular weight phenylethynyl terminated imide oligomers (PETIs) have been prepared by the cyclodehydration of precursor phenylethynyl terminated amic acid oligomers. Amino terminated amic acid oligomers are prepared from the reaction of dianhydride(s) with an excess of diamine(s) and subsequently endcapped with phenylethynyl phthalic anhydride(s) (PEPA). The polymerizations are carried out in polar aprotic solvents such as N-methyl-2-pyrrolidinone or N,N-dimethylacetamide under nitrogen at room temperature. The amic acid oligomers are subsequently cyclodehydrated either thermally or chemically to the corresponding imide oligomers. Direct preparation of PETIs from the reaction of dianhydride(s) with an excess of diamine(s) and endcapped with phenylethynyl phthalic anhydride(s) has been performed in m-cresol. Phenylethynyl phthalic anhydrides are synthesized by the palladium catalyzed reaction of phenylacetylene with bromo substituted phthalic anhydrides in triethylamine. These new materials exhibit excellent properties and are potentially useful as adhesives, coatings, films, moldings and composite matrices.

Hergenrother, Paul M.↗
NASA NTRS1999

Nonenzymatic oligomerization reactions on templates containing inosinic acid or diaminopurine nucleotide residues

The template-directed oligomerization of nucleoside-5'-phosphoro-2-methyl imidazolides on standard oligonucleotide templates has been studied extensively. Here, we describe experiments with templates in which inosinic acid (I) is substituted for guanylic acid, or 2,6-diaminopurine nucleotide (D) for adenylic acid. We find that the substitution of I for G in a template is strongly inhibitory and prevents any incorporation of C into internal positions in the oligomeric products of the reaction. The substitution of D for A, on the contrary, leads to increased incorporation of U into the products. We found no evidence for the template-directed facilitation of oligomerization of A or I through A-I base pairing. The significance of these results for prebiotic chemistry is discussed.

NASA Discipline Exobiology↗
DOE OSTI2023

Deciphering the evolution of flavin-dependent monooxygenase stereoselectivity using ancestral sequence reconstruction

Controlling the selectivity of a reaction is critical for target-oriented synthesis. Accessing complementary selectivity profiles enables divergent synthetic strategies, but is challenging to achieve in biocatalytic reactions given enzymes’ innate preferences of a single selectivity. Thus, it is critical to understand the structural features that control selectivity in biocatalytic reactions to achieve tunable selectivity. Here, we investigate the structural features that control the stereoselectivity in an oxidative dearomatization reaction that is key to making azaphilone natural products. Crystal structures of enantiocomplementary biocatalysts guided the development of multiple hypotheses centered on the structural features that control the stereochemical outcome of the reaction; however, in many cases, direct substitutions of active site residues in natural proteins led to inactive enzymes. Ancestral sequence reconstruction (ASR) and resurrection were employed as an alternative strategy to probe the impact of each residue on the stereochemical outcome of the dearomatization reaction. These studies suggest that two mechanisms are active in controlling the stereochemical outcome of the oxidative dearomatization reaction: one involving multiple active site residues in AzaH and the other dominated by a single Phe to Tyr switch in TropB and AfoD. Moreover, this study suggests that the flavin-dependent monooxygenases (FDMOs) adopt simple and flexible strategies to control stereoselectivity, which has led to stereocomplementary azaphilone natural products produced by fungi. This paradigm of combining ASR and resurrection with mutational and computational studies showcases sets of tools for understanding enzyme mechanisms and provides a solid foundation for future protein engineering efforts.

Science & Technology - Other Topics↗
DOE OSTI2021

Size-Dependent Janus-Ligand Shell Formation on PbS Quantum Dots

We studied the size-dependent Janus ligand shell formation on PbS QDs employing an X-type ligand exchange reaction between native oleate ligands and two substituted cinnamic acid ligands, trifluoromethyl- and dimethyl amino-cinnamic acid, representing electron donating and electron withdrawing ligands. The exchange reactions become significantly more favorable for both electron donating and withdrawing ligands (..delta..G becomes more negative) in the smaller QDs compared to the larger QDs likely because the ligand density is smaller on the larger QDs reducing the strength of the ligand-ligand interactions. We found that Janus-ligand shells form more readily on smaller QDs than on bigger QDs with electron donating ligands. We also observed a dependence on the QD concentration that should be considered when forming Janus-ligand shells. Two-dimensional solution nuclear magnetic resonance spectroscopy (2D-NMR) shows evidence of pronounced phase segregation between oleate and electron donating ligands on the smaller QDs consistent with the enhanced ligand-ligand interactions. This study broadens our understanding of how to construct Janus and patchy ligand shell morphologies on small QDs.

14 SOLAR ENERGY↗
DOE OSTI2020

Multimodal Analysis of Reaction Pathways of Cathode Materials for Lithium Ion Batteries

Conversion mechanism in lithium ion batteries provides higher capacity than intercalation mechanism since multiple numbers of electrons and lithium ions are associated. However, poor cycling stability, large voltage hysteresis, and low energy efficiency have been great challenges of conversion reaction. To address those issues, conversion-type electrode materials have been reformed via doping or substituting other elements. For example, iron fluorides (FeF 2 , FeF 3 ) have modified as iron oxyfluorides (FeF 1-x O x ), showing enhanced long-term stability. Furthermore, co-substituted (both anion and cation substituted) Fe 0.9 Co 0.1 OF (FeCoOF) was demonstrated excellent cycling stability. (capacity of 350 mAh g -1 at a current of 500 mA g -1 for 1000 cycles). Substituting anion and cation in iron fluoride has been suggested as an effective method to achieve better reversibility but understanding of lithiation reactions in co-substituted FeCoOF is not clear. This work takes advantage of ex-situ/ in-situ synchrotron X-ray based techniques and transmission electron microscopy to elucidate structural changes with lithium ion, which may provide fundamental insights into modifying conversion-type materials. Figure 1 presents discharge-charge curves and pair distribution function patterns acquired at each potential. As lithium ions were inserted, structural changes were noticed both at short-range and long-range. However, long-range ordering was nearly maintained even at 1 V, indicating absence of conversion reaction. Figure 2 shows lithiation induced structural evolution of a single FeCoOF nanorod observed in real time. As lithiation proceeds, the width of nanorods shows a stepwise increase, particularly A in figure 2d, which may indicate multiple steps of lithiation occur. Considering that conversion reaction takes place around 2 V in FeF 3 , co-substitution Co and O into iron fluoride may change thermodynamic features of lithiation reactions by lowering the initiation potential for conversion reaction. Instead, phase transformations occur at long-range order, which may help maintaining structural integrity during operation, eventually, achieving cycling stability.

25 ENERGY STORAGE↗
DOE OSTI2021

Towards ternary binders involving limestone additions — A review

The review summarises literature to examine the transition from portland limestone cement system to composite ternary binder systems involving limestone. Interest in limestone addition as an ideal component in multicomponent binder systems has surged as evident from the large volume of literature published in the recent past. A ternary blended system, with co-substitution of limestone, has the potential to complement the reaction of the supplementary cementitious materials (SCMs). The direct addition of limestone powder helps to attain higher substitution levels of portland cement clinker, improve early age properties, and supplement SCM's reactivity. However, the dilution of hydrates could hamper the long-term benefits. In this review, the interaction of fine limestone is classified and elaborated under two broad umbrellas: physical and chemical interactions. The physical interactions can manifest in three ways, namely, filler action, shearing action and improved packing, which alters reaction rate and extent at early ages. The chemical interactions also modify the reaction kinetics and phase assemblage due to nucleation of C-S-H on calcite surfaces, preservation of the ettringite phase and formation of carboaluminates. Two different forms of carboaluminate hydrates — hemicarboaluminate and mono-carboaluminate can be present in the hydrate matrix depending on the balance between carbonate ions and aluminates in the pore solution. Several factors such as replacement level, particle size, choice of SCM, its reactivity and reactive aluminates content, sulphate levels, curing temperature, and duration of curing can control the carboaluminate formation, reaction degree of SCMs and chemical interaction from limestone additions. A combination of physical and chemical effects makes fine limestone a potential material for co-substitution with aluminosilicate based SCMs, mainly fly ash, slag, and calcined clay. In this review, the factors affecting limestone-SCM composites are summarised based on a detailed literature survey. The effects of SCM-limestone cement composites on hydration kinetics, reaction chemistry, the reactivity of SCMs, the stability of hydrated phases, and contribution to the physical structure development and macroscopic properties by evaluating hydration and mechanical properties are discussed. The importance of AFm (Al{sub 2}O{sub 3}–Fe{sub 2}O{sub 3}-mono) phases in various deterioration mechanisms in concrete and their influence on performance characteristics in different exposure environment is critically appraised.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Co-precipitation induces changes to iron and carbon chemistry and spatial distribution at the nanometer scale

Association of organic matter (OM) with mineral phases via co-precipitation is expected to be a widespread process in environments with high OM input and frequent mineral dissolution and re-precipitation. In contrast to surface area-limited adsorption processes, co-precipitation may allow for greater carbon (C) accumulation. However, the potential sub-micrometer scale structural and compositional differences that affect the bioavailability of co-precipitated C are largely unknown. In this work, we used a combination of high-resolution analytical electron microscopy and bulk spectroscopy to probe interactions between a mineral phase (ferrihydrite, nominally Fe 2 O 3 •0.5H 2 O) and organic soil-derived water-extractable OM (WEOM). In co-precipitated WEOM-Fe, nanometer-scale scanning transmission electron microscopy with electron energy loss spectroscopy (STEM-EELS) revealed increased Fe(II) and less Fe aggregation relative to adsorbed WEOM-Fe. Spatially distinct lower- and higher-energy C regions were detected in both adsorbed and co-precipitated WEOM-Fe. In co-precipitates, lower-energy aromatic and/or substituted aromatic C was spatially associated with reduced Fe(II), but higher-energy oxidized C was enriched at the oxidized Fe(III) interface. Therefore, we show that co-precipitation does not constitute a non-specific physical encapsulation of C that only affects Fe chemistry and spatial distribution, but may cause a bi-directional set of reactions that lead to spatial separation and transformation of both Fe and C forms. In particular, we propose that abiotic redox reactions between Fe and C via substituted aromatic groups (e.g., hydroquinones) play a role in creating distinct co-precipitate composition, with potential implications for its mineralization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A molecular beam and computational study on the barrierless gas phase formation of (iso)quinoline in low temperature extraterrestrial environments

Despite remarkable progress toward the understanding of the formation pathways leading to polycyclic aromatic hydrocarbons (PAHs) in combustion systems and in deep space, the complex reaction pathways leading to nitrogen-substituted PAHs (NPAHs) at low temperatures of molecular clouds and hydrocarbon-rich, nitrogen-containing atmospheres of planets and their moons like Titan have remained largely obscure. Here, we demonstrate through laboratory experiments and computations that the simplest prototype of NPAHs – quinoline and isoquinoline (C 9 H 7 N) – can be synthesized via rapid and de-facto barrier-less reactions involving o-, m- and p-pyridinyl radicals (C 5 H 4 N˙) with vinylacetylene (C 4 H 4 ) under low-temperature conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Vacuum-ultraviolet absorption cross-sections of functionalized cyclic hydrocarbons: Five-membered rings

Cross-sections were measured at 50 °C and 800 Torr using differential absorption spectroscopy in the vacuum-ultraviolet from 5.17 – 9.92 eV for a series of five-membered cyclic hydrocarbons: cyclopentane, cyclopentene, methylcyclopentane, tetrahydrofuran, furan, 2-methyltetrahydrofuran, 2,3-dihydro-5-methylfuran, tetrahydrofuran-3-one, 2-methyl-1,3-dioxolane, cyclopentanol, 2-hydroxytetrahydrofuran, cyclopentanone, 2-cyclopenten-1-one, 3-cyclopenten-1-one, 2-methylcyclopentan-1-one, 2-methylcyclopent-2-en-1-one, 1,2-epoxycyclopentane, 2,3-epoxycyclopentanone, and 3,4-epoxycyclopentanone. The majority of the species are functionalized and are directly related to chain-reactions relevant to combustion, such as substituted cyclic ethers and cycloalkenes. Uncertainty calculations were conducted as a function of photon energy to quantify errors associated with experimental repeatability, signal-to-noise ratio, and gas-phase concentration, yielding an upper limit of 5% in spectral regions where absorption is >2%. Here, the primary objective of the present work is to provide quantitative absorption cross-sections of species commonly produced in combustion reactions. Comparing qualitative differences among the five-membered cyclic species, in order to analyze the effect of functional groups on absorption, is a secondary objective. The majority of the spectra are reported for the first time and enable quantitative isomer-resolved speciation measurements in combustion chemistry.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Directed gas phase preparation of ethynylallene (H 2 CCCHCCH; X 1 A') via the crossed molecular beam reaction of the methylidyne radical (CH; X 2 Π) with vinylacetylene (H 2 CCHCCH; X 1 A')

The gas-phase bimolecular reaction of the methylidyne (CH; X 2 Π) radical with vinylacetylene (H 2 CCHCCH; X 1 A') was conducted at a collision energy of 20.3 kJ mol –1 under single collision conditions exploiting the crossed molecular beam experimental results merged with ab initio electronic structure calculations and ab initio molecular dynamics (AIMD) simulations. The laboratory data reveal that the bimolecular reaction proceeds barrierlessly via indirect scattering dynamics through long-lived C 5 H 5 reaction intermediate(s) ultimately dissociating to C 5 H 4 isomers along with atomic hydrogen with the latter predominantly originating from the vinylacetylene reactant as confirmed by the isotopic substitution experiments in the D1-methylidyne–vinylacetylene reaction. Combined with ab initio calculations of the potential energy surface (PES) and statistical Rice–Ramsperger–Kassel–Marcus (RRKM) calculations, the experimental determined reaction energy of –146 ± 26 kJ mol –1 along with the distribution minimum of T(θ) at 90° and isotopic substitution experiments suggest ethynylallene (p1; ΔrG = –230 ± 4 kJ mol –1 ) as the dominant product. The ethynylallene (p1) may be formed with extensive rovibrational excitation, which would result in a lower maximum translational energy. Further, AIMD simulations reveal that the reaction dynamics leads to p1 (ethynylallene, 75%) plus atomic hydrogen with the dominant initial complex being i1 formed by methylidyne radical addition to the double C[double bond, length as m-dash]C bond in vinylacetylene. Altogether, combining the crossed molecular beam experimental results with ab initio electronic structure calculations and ab initio molecular dynamics (AIMD) simulations, ethynylallene (p1) is expected to represent the dominant product in the reaction of the methylidyne (CH; X 2 Π) radical with vinylacetylene (H 2 CCHCCH; X 1 A').

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Understanding the Electronic Structure Evolution of Epitaxial LaNi1-xFexO3 Thin Films for Water Oxidation

Rare earth nickelates including LaNiO3 are promising catalysts for water electrolysis to produce oxygen gas. Recent studies report that Fe substitution for Ni can significantly enhance the oxygen evolution reaction (OER) activity of LaNiO3. However, the role of Fe in increasing activity remains ambiguous, with potential origins both structural and electronic in nature. Here, by utilizing a series of epitaxial LaNi1-xFexO3 thin films synthesized by oxygen-assisted molecular beam epitaxy, we report that Fe substitution tunes the oxidation state of Ni in LaNi1-xFexO3 and a volcano-like OER trend is observed with x = 0.375 being the most active. Spectroscopy and ab initio modeling reveal that the high-valent Fe3+? B-site cationic species strongly increases the transition metal (TM) 3d bandwidth via Ni-O-Fe bridges and enhances the TM 3d-O 2p hybridization, boosting the OER activity. Furthermore, pH-dependent electrochemical measurements suggest that the OER on LaNi1-xFexO3 involves a lattice oxygen-mediated mechanism.

LaNiO3, Fe substitution, charge transfer, lattice ↗
DOE OSTI2026

Effects of Synthesis Conditions on the Structure and Conductivity of Hydrogen-Substituted Graphdiyne

This study investigates how synthesis conditions influence the structure and conductivity of hydrogen-substituted graphdiyne (HsGDY). By varying the reaction temperature and solvent, we find that small changes in conditions markedly affect triple-bond retention and electronic continuity. Solid-state 13 C NMR and Raman spectroscopy reveal that elevated temperatures drive alkyne loss and partial graphitization, with N,N-dimethylformamide (DMF) promoting faster degradation than pyridine. The resulting decline in alkyne content directly correlates with reduced conductivity, indicating that preserving conjugation is essential for charge transport. These findings clarify how the synthetic environment governs the structural and electronic evolution of graphdiyne frameworks, providing insight into the controlled preparation of conjugated carbon networks.

alkyne retention↗
DOE OSTI2020

Stabilizing Single-Atom Iron Electrocatalysts for Oxygen Reduction via Ceria Confining and Trapping

Atomically dispersed Fe-N-C materials recently hold great interest in costly Pt substitution for the cathodic oxygen reduction reaction of fuel cells. However, the heat treatment involved in the materials preparation excites Fe aggregating into low activity of nanosized species rather than high activity of single-atom Fe sites. Herein we proposed a new "ceria-assisted" strategy to preferentially generate the active single-atom Fe sites in Fe-N-C materials, which involves oxidative polymerization of pyrrole, Ce 3+ and Fe 3+ adsorption, and subsequent heat treatment. Owing to its spatial confinement and strong trapping for Fe atoms, ceria can effectively suppress agglomeration of isolated Fe atoms and stabilize the Fe atoms by bonding to O in the lattice during the heat treatment, leading to a high content of atomically dispersed Fe (4.6 wt.%). Accordingly, the final catalyst showed ultrahigh ORR activity with a half-wave potential of 0.915 V and kinetic current density of 7.15 mA cm -2 at 0.9 V. When it was as assembled an anion exchange membrane fuel cell, a large maximum power density of 496 mW cm -2 was achieved.

25 ENERGY STORAGE↗
DOE OSTI2026

Vapor-Phase Heteroatom Incorporation into Semiconductive Molecular-Scale Magic-Size Clusters

Magic-size metal chalcogenide clusters of molecular size exhibit well-defined structure and unique properties that might be further expanded with the incorporation or substitution of a second metal. Here, we report the postmodification of magic-size clusters synthesized in polymer thin films via exposure to volatile metal organic precursors commonly utilized for atomic layer deposition. Exposure of In 6 S 6 (CH 3 ) 6 clusters to dimethylcadmium results in exposure-dependent incorporation of Cd 2+ , which extends the optical absorbance of the clusters into the visible spectrum. The mechanism for Cd 2+ incorporation is consistent with Cd 2+ replacement of In 3+ that includes methyl ligand removal to maintain charge neutrality. Even for clusters embedded in a polymer matrix, ligand loss leads to sintering and transformation into larger nanoscale aggregates with zinc blende-type structure. The extent of Cd incorporation can be modulated by varying the process temperature and volatile metal organic exposure as well as the choice of volatile metal organic precursor. A computational thermodynamic analysis of heteroatom incorporation for several metals and chemistries reveals that both the stability of the substituted cluster and the favorability of reaction byproducts jointly determine the favorability of cation incorporation.

atomic layer deposition↗