Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Structural phase transition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Negative linear compressibility in Se at ultra-high pressure above 120 GPa

A series of in situ synchrotron X-ray diffraction (XRD) measurements were carried out, combined with first-principles calculations, to study structural phase transitions of selenium at high pressures and room temperature. Several phase transitions were observed, among which an isostructural phase transition was found at around 120 GPa for the first time. Evolved from the rhombohedral (space group R$\bar{3}$m) structure (Se-V), the new phase (Se-V') exhibited an interesting increase of lattice parameter a at pressures from 120 to 148 GPa, known as negative linear compressibility (NLC). The discovery of NLC behavior observed in this work is mainly attributed to the accuracy and fine steps controlled by the membrane system for in situ XRD data collected with an exposure time of 0.5 s. After 140 GPa, a body-centered cubic (b.c.c.) structure Se-VI (space group Im$\bar{3}$m) was formed, which remains stable up to 210 GPa, the highest pressure achieved in this study. The bulk moduli of phases Se-V, Se-V' and Se-VI were estimated to be 83 ± 2, 321 ± 2 and 266 ± 7 GPa, respectively, according to the P–V curve fit by the third-order Birch–Murnaghan equation of state. The Se-V' phase shows a bulk modulus almost 4 times larger than that of the Se-V phase, which is mainly due to the effect of its NLC. NLC in a higher pressure range is always more significant in terms of fundamental mechanism and new materials discovery, yet it has barely been reported at pressures above 100 GPa. This will hopefully inspire future studies on potential NLC behaviors in other materials at ultra-high pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Kinetic Understanding of Field-Induced Phase Transition from Tetragonal to Ferroelectric Orthorhombic Phase in Ferroelectric CeO 2 –HfO 2 –ZrO 2 Films

The ferroelectric properties and structural phase transition behaviors of fluorite-type CeO 2 −HfO 2 −ZrO 2 films were investigated. The epitaxial films on indium tin oxide (ITO) (111)/yttria-stabilized zirconia (YSZ) (111) substrates were grown through pulsed laser deposition at room temperature and subsequently heat-treated at 1000 °C under a N 2 gas flow. The crystalline phases and Curie temperatures of the films were investigated by X-ray diffraction. An increase in the Ce or Zr content in the films led to a higher crystallographic symmetry, such as orthorhombic or tetragonal. In addition, electrical characterization revealed that the orthorhombic films and some of the tetragonal films displayed ferroelectricity. This was due to the field-induced phase transition from the tetragonal to ferroelectric orthorhombic phase in the films, where the Curie temperatures were relatively low. The tetragonal metastable phase was kinetically frozen and could not change into the stable orthorhombic phase at such a low temperature. The critical electric field where the field-induced phase transition occurred was below 0.8 MV/cm, which was sufficiently small compared to the coercive field. These results evidence the kinetic driving force that causes a field-induced phase transition from the paraelectric tetragonal phase to the ferroelectric orthorhombic phase in HfO 2 -based ferroelectrics. They also enhance our understanding of the thermodynamic phase stabilities of HfO 2 -based material polymorphs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Structural transition and possible pressure-induced superconductivity in a suboxide La 5 Pb 3 O

Here, in this study, we report a structural phase transition and its interplay with superconductivity in the suboxide La 5⁢ Pb 3 ⁢O. Upon cooling through 𝑇 𝑡 = 225K, La 5⁢ Pb 3⁢ O transforms from a high-temperature 𝐼⁢4/mcm to a low-temperature 𝑃⁢4/ncc structure in which La-Pb dimerization along the 𝑐 axis occurs. This transition is accompanied by anomalies in the temperature dependence of electrical resistivity and specific heat. High-pressure electrical transport measurements reveal that hydrostatic pressure suppresses the structural transition and possibly induces superconductivity with a maximum superconducting temperature of 10 K. Density functional theory calculations show minimal changes in the electronic density of states and no gap opening at 𝐸 𝐹 across 𝑇 𝑡 , suggesting that the transition is driven by bonding effects rather than Fermi surface instability. These findings establish La 5⁢ Pb 3 ⁢O as a promising platform for exploring the interplay between weak structural transitions and superconductivity.

Yan, Jiaqiang [Oak Ridge National Laboratory (ORNL↗
DOE OSTI2026

Giant Magnetostriction in Ferrimagnetic SmFe 5 As 3

Magnetostrictive materials are of interest not only from a fundamental perspective but also for their potential applications, spanning spintronics to energy harvesting. A new magnetostrictive material—SmFe 5 As 3 —reveals a complex interplay between magnetostriction, magnetic properties, and the crystal structure behavior. The ground state of SmFe 5 As 3 is ferrimagnetic, as evidenced by magnetic susceptibility data, band-structure calculations, and XANES measurements. At T m1 = 28 ± 4 K, part of the Fe sublattice reorients, transitioning into a ferromagnetic state. This is followed by an entrance into the paramagnetic state at T m2 = 76 ± 4 K. The effects observed in the magnetic measurements are accompanied by structural phase transitions. All three phases—below T m1 , between T m1 and T m2 , and above T m2 —are described by the same structural motif of the UCr 5 P 3 type (monoclinic space group P2 1 /m), differing only in the degree of deformation of the Fe–As framework. The new material exhibits giant magnetostriction of 2500 x 10 -6 . Dilatometry measurements on a SmFe 5 As 3 single crystal indicate strongly diverse behavior, exhibiting not only negative, but also zero, as well as positive thermo-elastic effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Probing the lattice structure of dynamically compressed and released single crystal iron through the alpha to epsilon phase transition

In this work, experiments using broadband Laue x-ray diffraction (XRD) were used to examine the lattice structure of dynamically compressed [100]-oriented single crystal iron samples at the Dynamic Compression Sector at the Advanced Photon Source. These experiments used 1 μm thick iron single crystal samples sandwiched between a polyimide ablator and a polycarbonate window. A 100 J, 10 ns duration laser pulse incident on the polyimide ablator was used to shock compress the iron samples to initial stresses greater than 25 GPa, exceeding the ~13 GPa alpha (body-centered-cubic or bcc structure) to epsilon (hexagonal-close-packed or hcp structure) phase transition stress. XRD measurements were performed at various times relative to the shock wave entering the iron sample: early times, <~150 ps while the initial shock waves propagated through the iron; intermediate times, after the iron equilibrated with the ablator and window reaching a plateau stress state (12 or 17 GPa) lasting several nanoseconds; and late times, during uniaxial strain release. The early time measurements show that in <~150 ps, the high-pressure hcp phase is relaxed with a c/a ratio of 1.61, contrary to previous laser shock experiments where a c/a ratio of 1.7 was inferred. In the plateau stress state and partially released states, XRD measurements showed that the hcp structure retained a c/a ratio of 1.61 with no observable changes in the microstructure. Upon stress release at ~1 GPa/ns release rate, the reverse phase transition (hcp to bcc) to the original single crystal orientation (implying a transformation memory effect) was observed to reach completion somewhere between 13 and 11 GPa, indicating little stress hysteresis under rapid uniaxial strain release. A similar memory effect for the reverse hcp to bcc transformation has been previously observed under hydrostatic compression. However, the bcc/hcp orientation relationships differ somewhat between dynamic and static compression experiments, implying that the transformation pathway under uniaxial dynamic strain differs from the Burgers mechanism.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Water-Stable 1D Hybrid Tin(II) Iodide Emits Broad Light with 36% Photoluminescence Quantum Efficiency

The optical and light emission properties of tin and lead halide perovskites are remarkable because of the robust room-temperature (RT) performance, broad wavelength tunability, high efficiency, and good quenching resistance to defects. These highly desirable attributes promise to transform current light-emitting devices, phosphors, and lasers. One disadvantage in most of these materials is the sensitivity to moisture. Here, we report a new air-stable one-dimensional (1D) hybrid lead-free halide material (DAO)Sn 2 I 6 (DAO, 1,8-octyldiammonium) that is resistant to water for more than 15 h. The material exhibits a sharp optical absorption edge at 2.70 eV and a strong broad orange light emission centered at 634 nm, with a full width at half-maximum (fwhm) of 142 nm (0.44 eV). The emission has a long photoluminescence (PL) lifetime of 582 ns, while the intensity is constant over a very broad temperature range (145–415 K) with a photoluminescence quantum yield (PLQY) of at least 20.3% at RT. Above 415 K the material undergoes a structural phase transition from monoclinic (C2/c) to orthorhombic (Ibam) accompanied by a red shift in the band gap and a quench in the photoluminescence emission. Density functional theory calculations support the trend in the optical properties and the 1D electronic nature of the structure, where the calculated carrier effective masses along the inorganic chain are significantly lower than those perpendicular to the chain. As a result, thin films of the compound readily fabricated from solutions exhibit the same optical properties, but with improved PLQY of 36%, for a 60 nm thick film, among the highest reported for lead-free low-dimensional 2D and 1D perovskites and metal halides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Intercalation as a versatile tool for fabrication, property tuning, and phase transitions in 2D materials

Recent advances in two-dimensional (2D) materials have led to the renewed interest in intercalation as a powerful fabrication and processing tool. Intercalation is an effective method of modifying the interlayer interactions, doping 2D materials, modifying their electronic structure or even converting them into starkly different new structures or phases. Herein, we discuss different methods of intercalation and provide a comprehensive review of various roles and applications of intercalation in next-generation energy storage, optoelectronics, thermoelectrics, catalysis, etc. The recent progress in intercalation effects on crystal structure and structural phase transitions, including the emergence of quantum phases are also reviewed.

2D materials↗
DOE OSTI2026

Effects of heteroatom doping on hydrogen uptake in tungsten oxide

Redox-active transition metal oxides (TMOs) that can undergo proton-insertion coupled electron transfer (PICET) are promising candidates for catalyzing molecular conversion reactions which require the transfer of hydrogen atoms (or the thermochemical equivalent, H + , e − ). Herein, we studied the effects of isovalent (Mo 6+ ) and aliovalent (V 5+ and Nb 5+ ) heteroatom doping on the electrochemical PICET behavior of monoclinic tungsten oxide (WO 3 ). Cyclic voltammetry in aqueous acidic electrolytes shows that the addition of redox-active heteroatoms (Mo 6+ and V 5+ ) leads to systematic shifts in redox couple half-wave potentials (E 1/2 ), broadening, and an overall decrease in the current response. Conversely, the non-redox active heteroatom (Nb 5+ ) only reduces the current response with no observable peak-current broadening. This broadening is attributed to changes in the proton binding affinities of oxygen in different chemical environments, i.e., bridging different pairs of redox-active transition metal cations. We determined the hydrogen bond dissociation free energy (H BDFE) values to elucidate the thermodynamic effect of heteroatom substitution. Density functional theory calculations reveal a differentiation in the hydrogen binding and oxygen vacancy formation energies between heteroatom doped structures. The PICET-induced structural phase transitions of the pristine and doped samples were further probed with operando electrochemical X-ray diffraction (EC-XRD) and with ex situ chemical reduction. The broadening of the potential-dependent current response with increased heteroatom doping manifests in the operando EC-XRD results as prolonged structural regions where multiple hydrogen bronze phases exist and the appearance of cubic bronze phases at lower degrees of reduction compared to pristine WO 3 .

Holzapfel, Noah P. [North Carolina State Universit↗
DOE OSTI2021

Revealing pressure-driven structural transitions in the hybrid improper ferroelectric Sr 3 Sn 2 O 7

In this work, we combine diamond anvil cell techniques and synchrotron-based infrared spectroscopy with a detailed symmetry analysis and lattice dynamics calculations to uncover a series of pressure induced structural phase transitions in the hybrid improper ferroelectric Sr 3 Sn 2 O 7 . The microscopic character of each high pressure phase is determined by comparing the measured spectrum with the predicted vibrational patterns of several related but distinct candidate space groups. Our analysis reveals a sequence of compression-induced transitions from A2 1 am ↔ Pnab ↔ Acaa ↔ I4/mmm at room temperature. Remarkably, this space group progression matches the sequence of temperature-dependent structural transitions observed in Sr 3 Sn 2 O 7 between 77 and 1000 K. Other hybrid improper ferroelectrics display a similar set of transitions, suggesting that pressure and probably strain will be very effective tuning parameters for this entire class of materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Complex structure due to As bonding and interplay with electronic structure in superconducting BaNi 2 As 2

BaNi 2 As 2 is a superconductor chemically related to the Fe-based superconductors, with a complex and poorly understood structural phase transition. We show, based on first-principles calculations, that, in fact, there are two distinct competing structures. These structures are different from the electronic, transport, and bonding points of view but are close in energy. These arise due to complex As bonding patterns and drive distortions of the Ni layers. This is supported by photoemission experiments. This is very distinct from views of the distortion as being primarily driven by electrons at the Fermi surface as in a classical charge density wave, or by correlated electron physics associated with the Ni d electrons and the Ni d orbitals. The structural distortion, although connected with As does lead to an interplay of electronic and structural behavior including induced anisotropic electronic transport. Here, the local bonding nature of the instabilities and the competition between distortions is discussed in the context of the complex behavior observed in BaNi 2 As 2 samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Structural Distortions and Uniaxial Negative Thermal Expansion in the Polar Dion–Jacobson Oxide RbNdTa 2 O 7

We provide deeper insight into the crystal structures, sequential structural phase transitions (I2cm → Cmce → I4/mcm → P4/mmm), thermal expansion, and electronic properties of the n = 2 Dion–Jacobson polar oxide RbNdTa 2 O 7 , through X-ray powder diffraction, neutron powder diffraction, Raman studies, and density functional theory calculations. We observed a uniaxial negative thermal expansion (NTE) across the first-order transition, I2cm → Cmce, where the unit cell contracts along the c-axis, which is driven by a contraction of the NdTa 2 O 6 layer. Here, this NTE occurs within the temperature range of the first-order phase transition and contrasts with the corkscrew mechanism typically observed in Ruddlesden–Popper phases. In RbNdTa 2 O 7 , the I2cm (hybrid improper ferroelectric) → Cmce (antipolar) transition involves crucial changes in the bond lengths of Nd and Ta polyhedra, coupled with polar to antipolar displacement of the Nd ions, leading to a net contraction in the NdTa 2 O 6 layer along the c-axis, while preserving the overall octahedral tilting magnitude. This transition highlights the intricate interplay between the Nd and Ta coordination and the associated TaO 6 distortions. Temperature-dependent Raman spectra analysis further confirms the first-order structural transition and associated NTE, providing evidence for increased bond stiffness across this transition. Additionally, using neutron powder diffraction, we have determined that the transition I4/mcm → P4/mmm occurs at approximately 1150 K. Finally, we have calculated from DFT + U, the partial density of states, the energy bandgaps, and effective masses of the charge carriers of the polar ground structure.

Chemical structure↗
DOE OSTI2020

Structure and Negative Thermal Expansion in Zr 0.3 Sc 1.7 Mo 2.7 V 0.3 O 12

A 2 M 3 O 12 -based materials have received considerable attention owing to their wide range of negative thermal expansion (NTE) and chemical flexibility toward novel materials design. However, the structure and NTE mechanism remain challenging. In this paper, Zr 4+ and V 5+ are used as a unit to compensatorily replace Sc 3+ and Mo 6+ in Sc 2 Mo 3 O 12 to tune its thermal expansion. Its crystal structure, phase transition, NTE property, and corresponding mechanisms are studied by high-resolution synchrotron X-ray diffraction, powder X-ray diffraction, ultralow-frequency Raman spectroscopy, and density functional theory calculations. The results show that Zr 0.3 Sc 1.7 Mo 2.7 V 0.3 O 12 adopts an orthorhombic (Pbcn) structure at room temperature, with V atoms occupying the position of Mo1 atoms and Zr atoms occupying the position of Sc atoms, and transforms to monoclinic (P2 1 /a) structure at similar to ~133 K (45 K lower than that of Sc 2 Mo 3 O 12 ). It exhibits excellent NTE in a broader range. Most of the phonon modes below 350 cm -1 have negative Grüneisen parameters, of which the lowest and next-lowest frequency (38.5 and 45.8 cm -1 ) optical phonon modes arising from the translational vibrations of the Sc/Zr and Mo/V atoms in the plane of the nonlinear linkage Sc/Zr-O-Mo/V have the largest and next-largest negative Grüneisen parameters and positive total anharmonicity, and contribute most to the NTE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Domain nucleation across the metal-insulator transition of self-strained V 2 O 3 films

Bulk V 2 O 3 features concomitant metal-insulator (MIT) and structural (SPT) phase transitions at T C ~ 160 K. In thin films, where the substrate clamping can impose geometrical restrictions on the SPT, the epitaxial relation between the V 2 O 3 film and substrate can have a profound effect on the MIT. Here we present a detailed characterization of domain nucleation and growth across the MIT in (001)-oriented V 2 O 3 films grown on sapphire. By combining scanning electron transmission microscopy (STEM) and photoelectron emission microscopy (PEEM), we imaged the MIT with planar and vertical resolution. We observed that upon cooling, insulating domains nucleate at the top of the film, where strain is lowest, and expand downwards and laterally. This growth is arrested at a critical thickness of 50 nm from the substrate interface, leaving a persistent bottom metallic layer. As a result, the MIT cannot take place in the interior of films below this critical thickness. However, PEEM measurements revealed that insulating domains can still form on a very thin superficial layer at the top interface. Our results demonstrate the intricate spatial complexity of the MIT in clamped V 2 O 3 , especially the strain-induced large variations along the c axis. Finally, engineering the thickness-dependent MIT can provide an unconventional way to build out-of-plane geometry devices by using the persistent bottom metal layer as a native electrode.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Suppression of metal-to-insulator transition and stabilization of superconductivity by pressure in Re 3 Ge 7

The effect of pressure on the low-temperature states of the Re 3 ⁡Ge 7 is investigated by both electrical and Hall resistance and magnetization measurements. At ambient pressure, the temperature-dependent resistance of Re 3 ⁡Ge 7 behaves quasilinearly from room temperature down to 60 K, then undergoes a two-step metal-to-insulator transition (MIT) at temperatures T 1 =59.4K and T 2 =58.7K, which may be related to a structural phase transition or occurrence of charge-density wave ordering. Upon applying pressure, the two-step (T 1 ,T 2 ) MIT splits into three steps (T 1 ,T 2 . and T 3 ) above 1 GPa, and all traces of MITs are fully suppressed by ~8 GPa. Subsequently, the onset of bulk superconductivity (SC) occurs between 10.8 and 12.2 GPa and persists to our highest pressure of 26.8 GPa. At 12.2 GPa the superconducting transition temperature, T c , and upper critical field, H c ⁢2 reach the maximum of T c (onset) ~5.9 K and H c ⁢2 (1.8 K) ~14 kOe. Finally, our results not only present the observation of SC under high pressure in Re 3 ⁡Ge 7 but also delineate the interplay between SC and other competing electronic states by creating a T-p phase diagram for this potentially topologically nontrivial system Re 3 ⁡Ge 7 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Li interaction-induced phase transition from black to blue phosphorene

A comprehensive first-principle calculation has been carried out and revealed that at sufficiently high Li concentration and certain well-defined configurations a phase transition from black to blue phosphorene can take place. Blue phosphorene, a newly predicted allotrope of phosphorus, possesses unique crystalline and electronic structure and is a promising candidate, not only for fundamental research but also for electronic and optoelectronic applications. Methods to growth high quality blue phosphorene layers are highly desirable but challenging. Here, a novel kinetic pathway to grow blue phosphorene layers from black phosphorene layers via Li intercalation is proposed based on first principle study. This study pointed out that Li atoms intercalated in black phosphorene could act as ‘catalyst’ in the ‘reactive region’ of the lone pair of P atoms, leading to a P-P bond breaking and subsequently, a local structural transformation from orthorhombic lattice to an assembly of parallel narrow nanoribbons with rhombohedra-like symmetry. During Li deintercalation, these nanoribbons are self-mended and form blue phosphorene layers. The interlayer distance was found 4.60 Å for double layer with AA stacking and 4.13 Å for multilayer with ABC stacking, respectively, indicating a monolayer blue phosphorene can be mechanically exfoliated. Furthermore, this study also points out the possibility of new phases in other systems, where intercalation can lead to an unexpected structural phase transition and even a discovery of novel materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Memory effect and phase transition in a hierarchical trap model for spin glasses

Here, we introduce an efficient dynamical tree method that enables us to explicitly demonstrate the thermoremanent magnetization memory effect in a hierarchical energy landscape. Our simulation nicely reproduces the nontrivial waiting-time and waiting-temperature dependences in this nonequilibrium phenomenon. We further investigate the condensation effect, in which a small set of microstates dominates the thermodynamic behavior in the multilayer trap model. Importantly, a structural phase transition of the multilayer tree model is shown to coincide with the onset of the condensation phenomenon. Our results underscore the importance of hierarchical structure and demonstrate the intimate relation between the glassy behavior and structure of barrier trees.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

A compact x-ray diffraction system for dynamic compression experiments on pulsed-power generators

Pulsed-power generators can produce well-controlled continuous ramp compression of condensed matter for high-pressure equation-of-state studies using the magnetic loading technique. X-ray diffraction (XRD) data from dynamically compressed samples provide direct measurements of the elastic compression of the crystal lattice, onset of plastic flow, strength–strain rate dependence, structural phase transitions, and density of crystal defects, such as dislocations. Here, we present a cost-effective, compact, pulsed x-ray source for XRD measurements on pulsed-power-driven ramp-loaded samples. This combination of magnetically driven ramp compression of materials with a single, short-pulse XRD diagnostic will be a powerful capability for the dynamic materials’ community to investigate in situ dynamic phase transitions critical to equation of states. Finally, we present results using this new diagnostic to evaluate lattice compression in Zr and Al and to capture signatures of phase transitions in CdS.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Structural origin of recovered ferroelectricity in BaTi O 3 nanoparticles

Nanoscale BaTiO 3 particles (≈10 nm) prepared by ball-milling a mixture of oleic acid and heptane have been reported to have an electric polarization several times larger than that for bulk BaTiO 3 . In this work, detailed local, intermediate, and long-range structural studies are combined with spectroscopic measurements to develop a model structure of these materials. The X-ray spectroscopic measurements reveal large Ti off-centering as the key factor producing the large spontaneous polarization in the nanoparticles. Temperature-dependent lattice parameter changes reveal the sharpening of the structural phase transitions in these BaTiO 3 nanoparticles compared to the pure nanoparticle systems. In conclusion, sharp crystalline-type peaks in the barium oleate Raman spectra suggest that this component in the composite core-shell matrix, a product of mechanochemical synthesis, stabilizes an enhanced polar structural phase of the BaTiO 3 core nanoparticles.

36 MATERIALS SCIENCE↗