Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Stress Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Stress and efficiency studies

Optical and electrical characterization of defects has been started in EFG ribbon grown in a system that will be used to test the stress model. Temperature and stress field modeling aimed at defining low stress growth configuration is also in progress, and results will be used to guide development of the experimental system. The baseline defect configuration for ribbon grown at speeds of approx. 1 cm/min consists of dislocation densities of the order of 10 to the 5th power to 10 to the 6th power/sq cm, as well as saucer type etch pits and line defects. All these defects are inhomogeneously distributed. EBIC measurements indicate that diffusion lengths are in the range 20 to 60 microns, and significant spatial inhomogeneities occur through the ribbon thickness. Growth speed changes in the range 0.7-1.0 cm/min do not produce significant variations in ribbon defect configurations.

Source record↗
DOE OSTI2022

Thermo-Mechanical Distortion of Tungsten-Coated Steel During High Heat Flux Testing Using Plasma Arc Lamps

An experimental setup and a test section were designed and fabricated for high heat flux testing (HHFT) of neutron-irradiated specimens using water-wall plasma arc lamps. Because of the radiological considerations and limitations of reactor irradiation, the size of the test articles was limited to disks less than 10 mm in diameter. The specimen was clamped onto an actively cooled block, and clamping allowed the insertion of several thermocouples on the back surface of the specimen through a copper (Cu) block. Five vacuum plasma sprayed tungsten (W)–coated F82H steel specimens were subjected to HHFT. Surface profilometry measurements, which were conducted after HHFT, revealed central bowing of the top W surface. This type of residual distortion occurred for all of the specimens, and the larger the specimens were, the larger was the distortion.In an attempt to understand specimen distortion and address the science questions related to the testing of subsize specimens during HHFT, a simplified thermo-mechanical model was developed. By using a measured temperature in the Cu as an isothermal boundary condition, the model eliminated the need for coupling cooling fluid flow models with stress models, greatly simplifying the analysis. The main variable in the proposed model is hC, i.e., the thermal contact conductance between the F82H and the Cu washer. Inelastic properties, including hardening properties, were considered for F82H steel and Cu. Numerical simulation results demonstrated a buildup of residual deformation during HHFT and a very complex state of stress and deformation during typical heat flux (HF) cycling. Additionally, hoop stress evolution during a high heat flux cycle reveals that F82H at an interface with W would be mainly in compression during HF application and experienced a transition to a tension state during cooldown. Also, specimen distortion evolves during each HF cycle, as the specimen bows downward during HF application and upward during the cooldown period between HF cycles. The final specimen distortion, i.e., upward bowing of the specimen center, was qualitatively predicted for hC values of 4000 to 5000 W/(m 2 ·K). This hC range of values, for which bulging is obtained, is at the lower spectrum of the range of values for hC, consistent with the low thermal contact conductance expected from the unpolished F82H surface.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1985

Simulation as an aid to phenomenological modeling

Certain difficulties arise in connection with the development of models for the prediction of turbulent flow characteristics. The present paper is mainly concerned with an approach which provides an aid in such development work by making it possible to test Reynolds average turbulence models. This approach is based on full and large eddy simulations of turbulent flows. Attention is given to details regarding Reynolds average turbulence models, mixing length models, two equation (k-epsilon) models, Reynolds stress models, and passive scalars. It is shown that a great deal about modeling can be learned from simulations of turbulent flows. There is reason to believe that these results will lead to improvements in the quality of predictions of turbulent flows.

Ferziger, J. H.↗
NASA NTRS1987

A review: Quantitative models for lava flows on Mars

The purpose of this abstract is to review and assess the application of quantitative models (Gratz numerical correlation model, radiative loss model, yield stress model, surface structure model, and kinematic wave model) of lava flows on Mars. These theoretical models were applied to Martian flow data to aid in establishing the composition of the lava or to determine other eruption conditions such as eruption rate or duration.

Baloga, S. M.↗
NASA NTRS1993

Investigation of high-speed free shear flows using improved pressure-strain correlated Reynolds stress turbulence model

A high-speed shear layer is studied using compressibility corrected Reynolds stress turbulence model which employs newly developed model for pressure-strain correlation. MacCormack explicit prediction-corrector method is used for solving the governing equations and the turbulence transport equations. The stiffness arising due to source terms in the turbulence equations is handled by a semi-implicit numerical technique. Results obtained using the new model show a sharper reduction in growth rate with increasing convective Mach number. Some improvements were also noted in the prediction of the normalized streamwise stress and Reynolds shear stress. The computed results are in good agreement with the experimental data.

Tiwari, S. N.↗
NASA NTRS1992

Systematic study of Reynolds stress closure models in the computations of plane channel flows

The roles of pressure-strain and turbulent diffusion models in the numerical calculation of turbulent plane channel flows with second-moment closure models are investigated. Three turbulent diffusion and five pressure-strain models are utilized in the computations. The main characteristics of the mean flow and the turbulent fields are compared against experimental data. All the features of the mean flow are correctly predicted by all but one of the Reynolds stress closure models. The Reynolds stress anisotropies in the log layer are predicted to varying degrees of accuracy (good to fair) by the models. None of the models could predict correctly the extent of relaxation towards isotropy in the wake region near the center of the channel. Results from the directional numerical simulation are used to further clarify this behavior of the models.

Demuren, A. O.↗
NASA NTRS1993

Perspective - Systematic study of Reynolds stress closure models in the computations of plane channel flows

The roles of pressure-strain and turbulent diffusion models in the numerical calculation of turbulent plane channel flows with second-moment closure models are investigated. Three turbulent diffusion and five pressure-strain models are utilized in the computations. The main characteristics of the mean flow and the turbulent fields are compared against experimental data. All the features of the mean flow are correctly predicted by all but one of the Reynolds stress closure models. The Reynolds stress anisotropies in the log layer are predicted to varying degrees of accuracy (good to fair) by the models. None of the models could predict correctly the extent of relaxation towards isotropy in the wake region near the center of the channel. Results from the directional numerical simulation are used to further clarify this behavior of the models.

Demuren, A. O.↗
DOE OSTI2022

Modeling of Cube Array Roughness: RANS, Large Eddy Simulation, and Direct Numerical Simulation

Abstract Flow over arrays of cubes is an extensively studied model problem for rough wall turbulent boundary layers. While considerable research has been performed in computationally investigating these topologies using direct numerical simulation (DNS) and large eddy simulation (LES), the ability of sublayer-resolved Reynolds-averaged Navier–Stokes (RANS) to predict the bulk flow phenomena of these systems is relatively unexplored, especially at low and high packing densities. Here, RANS simulations are conducted on six different packing densities of cubes in aligned and staggered configurations. The packing densities investigated span from what would classically be defined as isolated, up to those in the d-type roughness regime, filling in the gap in the present literature. Three different sublayer-resolved turbulence closure models were tested for each case: a low Reynolds number k–ϵ model, the Menter k–ω SST model, and a full Reynolds stress model. Comparisons of the velocity fields, secondary flow features, and drag coefficients are made between the RANS results and existing LES and DNS results. There is a significant degree of variability in the performance of the various RANS models across all comparison metrics. However, the Reynolds stress model demonstrated the best accuracy in terms of the mean velocity profile as well as drag partition across the range of packing densities.

Engineering↗
NASA NTRS1992

Uncertainties in obtaining high reliability from stress-strength models

There has been a recent interest in determining high statistical reliability in risk assessment of aircraft components. The potential consequences are identified of incorrectly assuming a particular statistical distribution for stress or strength data used in obtaining the high reliability values. The computation of the reliability is defined as the probability of the strength being greater than the stress over the range of stress values. This method is often referred to as the stress-strength model. A sensitivity analysis was performed involving a comparison of reliability results in order to evaluate the effects of assuming specific statistical distributions. Both known population distributions, and those that differed slightly from the known, were considered. Results showed substantial differences in reliability estimates even for almost nondetectable differences in the assumed distributions. These differences represent a potential problem in using the stress-strength model for high reliability computations, since in practice it is impossible to ever know the exact (population) distribution. An alternative reliability computation procedure is examined involving determination of a lower bound on the reliability values using extreme value distributions. This procedure reduces the possibility of obtaining nonconservative reliability estimates. Results indicated the method can provide conservative bounds when computing high reliability. An alternative reliability computation procedure is examined involving determination of a lower bound on the reliability values using extreme value distributions. This procedure reduces the possibility of obtaining nonconservative reliability estimates. Results indicated the method can provide conservative bounds when computing high reliability.

Neal, Donald M.↗
DOE OSTI2023

Two self-similar Reynolds-stress transport models with anisotropic eddy viscosity

Two Reynolds-averaged Navier-Stokes models with full Reynolds-stress transport (RST) and tensor eddy viscosity are presented. These new models represent RST extensions of the $k−2L−a−\mathscr{C}$ and $k−ϕ−L−a−\mathscr{C}$ models by Morgan. Self-similarity analysis is used to derive constraints on model coefficients required to reproduce expected growth parameters for a variety of canonical flows, including Rayleigh-Taylor (RT) and Kelvin-Helmholtz (KH) mixing layers. Both models are then applied in one-dimensional simulation of RT and KH mixing layers, and the expected self-similar growth rates and anisotropy are obtained. Next, models are applied in two-dimensional simulation of the so-called “tilted rocket rig” inclined RT experiment and in simulation of a shock-accelerated localized patch of turbulence. Here it is found that RST is required to capture the qualitative growth of the shock-accelerated patch, and an anisotropic eddy viscosity provides substantial improvement over a Boussinesq treatment for the tilted rocket rig problem.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1995

Reliability Stress-Strength Models for Dependent Observations with Applications in Clinical Trials

We consider the applications of stress-strength models in studies involving clinical trials. When studying the effects and side effects of certain procedures (treatments), it is often the case that observations are correlated due to subject effect, repeated measurements and observing many characteristics simultaneously. We develop maximum likelihood estimator (MLE) and uniform minimum variance unbiased estimator (UMVUE) of the reliability which in clinical trial studies could be considered as the chances of increased side effects due to a particular procedure compared to another. The results developed apply to both univariate and multivariate situations. Also, for the univariate situations we develop simple to use lower confidence bounds for the reliability. Further, we consider the cases when both stress and strength constitute time dependent processes. We define the future reliability and obtain methods of constructing lower confidence bounds for this reliability. Finally, we conduct simulation studies to evaluate all the procedures developed and also to compare the MLE and the UMVUE.

Kushary, Debashis↗
NASA NTRS1991

Application of a Reynolds Stress turbulence model to a supersonic hydrogen-air diffusion flame

A second-order differential Reynolds Stress turbulence model has been applied to the Favre-averaged Navier-Stokes equations for the study of supersonic flows undergoing hydrogen-air chemical reactions. An assumed Beta Probability Density Function is applied to account for the chemical source terms in the conservation equations. An algebraic Reynolds Flux model is used for the fluctuating density-velocity as well as the species mass fraction-velocity correlations. The variances of temperature and species fluctuations are also modelled using an algebraic flux technique. A seven-species, seven-reaction finite rate chemistry mechanism is used to simulate the combustion processes. The resulting formulation is validated by comparison with experimental data on reacting supersonic axisymmetric jets. Results obtained for specific conditions indicate that the effect of chemical reaction on the turbulence is significant.

Chandrasekhar, R.↗
DOE OSTI2022

Predicting variations of the least principal stress with depth: Application to unconventional oil and gas reservoirs using a log-based viscoelastic stress relaxation model

Knowledge of layer-to-layer variations of the least principal stress, S hmin , with depth is essential for optimization of multi-stage hydraulic fracturing in unconventional reservoirs. Utilizing a geomechanical model based on viscoelastic stress relaxation in relatively clay rich rocks, we present a new method for predicting continuous S hmin variations with depth. The method utilizes geophysical log data and S hmin measurements from routine diagnostic fracture injection tests (DFITs) at several depths for calibration. We consider a case study in the Wolfcamp formation in the Midland Basin, where both geophysical logs and values of S hmin from DFITs are available. We compute a continuous stress profile as a function of the well logs that fits all of the DFITs well. We utilized several machine learning technologies, such as bootstrap aggregation (or bagging), to improve the generalization of the model and demonstrate that the excellent fit between predicted and observed stress values is not the result of over-fitting the calibration points. The model is then validated by accurately predicting hold-out stress measurements from four wells within the study area and, without recalibration, accurately predicting stress as a function of depth in an offset pad about 6 miles away.

58 GEOSCIENCES↗
NASA NTRS1983

Effects of expansion ratio on the calculation of parallel-walled backward-facing step flows - Comparison of four models of turbulence

This paper presents a numerical study of the effects of expansion ratio on two-dimensional separating and reattaching flows in plane backward-facing step geometries with parallel walls. Closure of the Reynolds equations was achieved by four different turbulence models: k-epsilon, 'modified' k-epsilon, algebraic stress, and 'modified' algebraic stress models. The k-epsilon model relates the Reynolds stresses to the mean rate of strain through the definition of an isotropic turbulent viscosity. The more advanced algebraic stress model calculates the stresses from implicit algebraic relationships containing the stresses themselves, the mean rate of strain, and the turbulent kinetic energy and its dissipation rate. 'Modified' versions of the models employ a new dissipation rate equation whose production term was made more sensitive to streamwise curvature effects. A new nonequilibrium wall function treatment proposed by Chieng and Launder (1980) was also incorporated into each model.

Sindir, M. M.↗
NASA NTRS1993

Application of a Reynolds stress turbulence model to a supersonic radiating hydrogen-air diffusion flame

A second-order differential Reynolds Stress turbulence model has been applied to the Favre-averaged Navier-Stokes equations for the study of supersonic flows with finite-rate chemistry and radiation. An assumed Beta Probability Density Function is applied to account for the chemical source terms and the radiative flux terms in the conservation equations. A seven-species, seven-reaction finite rate chemistry mechanism is used to simulate the combustion process. The tangent slab approximation is used in radiative flux formulation. A pseudo-gray gas model is used to represent the absorption-emission characteristics of the participating species. The turbulence/radiation interaction is achieved via a new formulation. The resulting formulation is validated by comparison with experimental data on reacting supersonic axisymmetric jets. Results obtained for specific conditions indicate that the effect of chemical reaction on the turbulence is significant. Also, the radiative heat transfer is enhanced by the turbulence.

Chandrasekhar, R.↗