Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Stability Margin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Using Lag Compensator in Orbit Feedback

Growing demand on the beam orbit stability requires higher loop gain inside the operational bandwidth. However, increasing the gain leads to the increase of the unity gain frequency and problems with systems stability due to the additional phase shifts caused by the trims (power supplies, eddy currents in vacuum chambers, etc.) and filtering of beam position data. Conventionally employed systems have 20 dB/decade slope near the unity gain providing 90 degrees phase shift which is sufficient for stability. Increase of the slope to 40 dB/decade by adding additional pole into the signal chain increases the phase shift to 180 degrees and makes system unstable. Utilizing one or more lag compensators allows to increase the gain while keeping phase margin acceptable. The paper provides more details on the proposed solution as well as simulations of how the transients will be modified.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

On the new universality class in structurally disordered n -vector model with long-range interactions

We study a stability boundary of a region where nontrivial critical behavior of an n-vector model with long-range power-law decaying interactions is induced by the presence of a structural disorder (e.g., weak quenched dilution). This boundary is given by the marginal dimension of the order parameter nc dependent on space dimension, d, and a control parameter of the interaction decay, σ, below which the model belongs to the new dilution-induced universality class. Exploiting the Harris criterion and recent field theoretical renormalization group results for the pure model with long-range interactions, we get nc as a three loop ɛ = 2σ – d-expansion. We provide numerical values for nc applying series resummation methods. Our results show that not only the Ising systems (n = 1) can belong to the new disorder-induced long-range universality class at d = 2 and 3.

Physics↗
DOE OSTI2024

Frozen Freedom: Unleashing Grocery Store Demand Flexibility: Preprint

Grocery stores consumed approximately 3% of total electricity used by commercial buildings in the U.S. in 2018 (EIA 2018), representing a unique end-use load profile characterized by the critical use of refrigerated display cases. Exploring demand response (DR) scenarios in grocery stores presents an opportunity to enhance the efficiency and sustainability of surrounding communities. In addition, recent studies demonstrate that implementing control algorithms considering demand flexibility strategies can lead to load and peak reductions in standalone refrigerated display cases. Because small business grocery stores operate on thin margins, the energy bill cost savings DR might provide could make a positive difference toward continued operations. Still, uncertainty remains about the extent of demand flexibility potential controls could provide when coupling refrigeration with whole building operation. To enhance economic viability and grid stability, it is essential to quantify the load flexibility capability of grocery stores. Advanced controls can optimize energy consumption by responding to load shedding, shifting, and DR events, as well as daily Time-of-Use (TOU) rates without compromising food safety. Using both quantitative data and interviews with community-based organizations, we developed a full-size store model and two small store models with controlled refrigerated cases, HVAC, and lighting systems based on actual grocery store properties. Through simulations, we have assessed load flexibility strategies with varied DR events. The results highlight potential for energy and peak reduction with advanced or basic controls. However, interviews and data indicate that more support is needed to make DR strategies consistently accessible to small grocery stores.

demand flexibility↗
DOE OSTI2021

Toward efficient polynomial preconditioning for GMRES

Here, we present a polynomial preconditioner for solving large systems of linear equations. The polynomial is derived from the minimum residual polynomial (the GMRES polynomial) and is more straightforward to compute and implement than many previous polynomial preconditioners. Our current implementation of this polynomial using its roots is naturally more stable than previous methods of computing the same polynomial. We implement further stability control using added roots, and this allows for high degree polynomials. We discuss the effectiveness and challenges of root-adding and give an additional check for stability. In this article, we study the polynomial preconditioner applied to GMRES; however it could be used with any Krylov solver. This polynomial preconditioning algorithm can dramatically improve convergence for some problems, especially for difficult problems, and can reduce dot products by an even greater margin.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Restoring Soil Fertility on Degraded Lands to Meet Food, Fuel, and Climate Security Needs via Perennialization

A continuously growing pressure to increase food, fiber, and fuel production to meet worldwide demand and achieve zero hunger has put severe pressure on soil resources. Abandoned, degraded, and marginal lands with significant agricultural constraints—many still used for agricultural production—result from inappropriately intensive management, insufficient attention to soil conservation, and climate change. Continued use for agricultural production will often require ever more external inputs such as fertilizers and herbicides, further exacerbating soil degradation and impeding nutrient recycling and retention. Growing evidence suggests that degraded lands have a large potential for restoration, perhaps most effectively via perennial cropping systems that can simultaneously provide additional ecosystem services. Here we synthesize the advantages of and potentials for using perennial vegetation to restore soil fertility on degraded croplands, by summarizing the principal mechanisms underpinning soil carbon stabilization and nitrogen and phosphorus availability and retention. We illustrate restoration potentials with example systems that deliver climate mitigation (cellulosic bioenergy), animal production (intensive rotational grazing), and biodiversity conservation (natural ecological succession). Perennialization has substantial promise for restoring fertility to degraded croplands, helping to meet future food security needs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Biomass Production and Nutrient Removal by Perennial Energy Grasses Produced on a Wet Marginal Land

Growing dedicated bioenergy crops on marginal land can provide beneficial outcomes including biomass production and energy, resource management, and ecosystem services. We investigated the effects of harvest timing (peak standing crop [PEAK] or after killing frost [KF]) and nitrogen (N) fertilizer rates (0, 56, and 112 kg N ha -1 ) on yield, nutrient concentrations, and nutrient removal rates of perennial grasses on a wet marginal land. We evaluated three monocultures, including switchgrass (Panicum virgatum L., SW), Miscanthus x giganteus (MG), prairie cordgrass (Spartina pectinata Link, PCG), and a polyculture mixture of big bluestem (Andropogon gerardii Vitman), Indiangrass (Sorghastrum nutans (L.) Nash), and sideoats grama (Bouteloua curtipendula Torr., MIX). Increasing the application of N did correlate with increased biomass, concentration, and subsequent removal of nutrients across almost all treatment combinations. In all grass treatments except MG, PEAK harvesting increased yield and nutrient removal. At PEAK harvest, switchgrass is ideal for optimizing both biomass production and nutrient removal. While our results also suggest short-term plasticity for farmers when selecting harvest timing for optimal nutrient removal, KF harvest is recommended to ensure long-term stand longevity and adequate nutrient removal. If the KF harvest is adopted, MG would be the ideal option for optimizing biomass yield potential. Additionally, we found that the yield of polyculture did not vary much with harvest timing, suggesting better yield stability. Future studies should give consideration for long-term evaluation of polyculture mixtures to assess their biomass yields and nutrient removal capacities.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Techno-Economic Analysis of Recycling Strategies for Catalyst and Acid During Catalytic Graphitization

With the aim of meeting the urgent demand for active anode materials (AAM) in energy storage systems, bio-based graphite (biographite) emerges as an affordable solution to de-risk the turbulent supply chain of critical minerals. Anode grade biographite requires high crystallinity and purity, which can be achieved by catalytic graphitization with iron, followed by acid washing. Therefore, a well-conceived process integration that recycles catalyst can be the starting point to commercialization. This study evaluates closed-loop catalyst recovery, and byproducts valorization scenarios through a technoeconomic framework to help understand the scale-up potential of biographite. For the acid washing, three reactors in series meet the required biographite purity at 99.95%. Iron and acid recovery can reduce material consumption and waste generation by ~95%, albeit at the expense of ~80% increase in capital costs. Recovery scenarios present similar capital and operational expenses, yielding minimum selling prices (MSP) near $6 kg-1 of biographite. Monte Carlo methodology reveals that feedstock price accounts for ~60% of MSP variance, followed by plant capacity ~20%. The likelihood of reaching a competitive profit margin of 30% in the U.S. AAM market sits at 85% average for recovery scenarios, and 103% when iron oxide is sold as byproduct. Additionally, an IRR >= 15% can be achieved for half of Monte Carlo simulations, representing promising early-stage results. Biographite production offers a strategic pathway to stabilize the anode market beyond China by integrating established technologies for a scalable, economically viable, and sustainable process. The role of catalyst recovery and byproducts utilization is critical for advancing the biomaterials industry.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Baseband Digital Network Analyzer Upgrade for LLRF Controllers

Digital Network Analyzers (DNA) have been implemented in many Low-Level Radio Frequency (LLRF) systems, notably NSLS-II and CERN, to help tune feedback loops. DNA characterizes feedback loops by measuring the frequency-dependent magnitude and phase transfer functions. It enables the measurement of open loop gains, gain/phase margins, and loop delays to help fine-tune feedback loops. An FPGA-based DNA has been developed and integrated into the current Relativistic Heavy Ion Collider (RHIC) LLRF infrastructure. Its performance has been tested with an implementation of one-turn delay feedback (OTFB) on the bench to maximize gain and stability. The DNA has been used to characterize a RHIC 28 MHz cavity in a RHIC Accelerator Physics Experiment (APEX) to test transient beam loading compensation strategies.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Entanglement and correlations in fast collective neutrino flavor oscillations

Collective neutrino oscillations play a crucial role in transporting lepton flavor in astrophysical settings like supernovae and neutron star binary merger remnants, which are characterized by large neutrino densities. In these settings, simulations in the mean-field approximation show that neutrino-neutrino interactions can overtake vacuum oscillations and give rise to fast collective flavor evolution on time-scales t ∝ μ –1 , with μ proportional to the local neutrino density. In this work, we study the full out-of-equilibrium flavor dynamics in simple multi-angle geometries displaying fast oscillations in the mean field linear stability analysis. Focusing on simple initial conditions, we analyze the production of pair correlations and entanglement in the complete many-body-dynamics as a function of the number N of neutrinos in the system, for up to thousands of neutrinos. Similarly to simpler geometries with only two neutrino beams, we identify three regimes: stable configurations with vanishing flavor oscillations, marginally unstable configurations with evolution occurring on long time scales τ ≈ µ –1 $\sqrt{N}$, and unstable configurations showing flavor evolution on short time scales τ ≈ μ –1 log(N). Here, we present evidence that these fast collective modes are generated by the same dynamical phase transition which leads to the slow bipolar oscillations, establishing a connection between these two phenomena and explaining the difference in their time scales. We conclude by discussing a semi-classical approximation which reproduces the entanglement entropy at short to medium time scales and can be potentially useful in situations with more complicated geometries where classical simulation methods starts to become inefficient.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Developing expert scientific consensus on the environmental and societal effects of marine artificial structures prior to decommissioning

Thousands of artificial (‘human-made’) structures are present in the marine environment, many at or approaching end-of-life and requiring urgent decisions regarding their decommissioning. No consensus has been reached on which decommissioning option(s) result in optimal environmental and societal outcomes, in part, owing to a paucity of evidence from real-world decommissioning case studies. To address this significant challenge, we asked a worldwide panel of scientists to provide their expert opinion. They were asked to identify and characterise the ecosystem effects of artificial structures in the sea, their causes and consequences, and to identify which, if any, should be retained following decommissioning. Experts considered that most of the pressures driving ecological and societal effects from marine artificial structures (MAS) were of medium severity, occur frequently, and are dependent on spatial scale with local-scale effects of greater magnitude than regional effects. The duration of many effects following decommissioning were considered to be relatively short, in the order of days. Overall, environmental effects of structures were considered marginally undesirable, while societal effects marginally desirable. Experts therefore indicated that any decision to leave MAS in place at end-of-life to be more beneficial to society than the natural environment. However, some individual environmental effects were considered desirable and worthy of retention, especially in certain geographic locations, where structures can support improved trophic linkages, increases in tourism, habitat provision, and population size, and provide stability in population dynamics. The expert analysis consensus that the effects of MAS are both negative and positive for the environment and society, gives no strong support for policy change whether removal or retention is favoured until further empirical evidence is available to justify change to the status quo. The combination of desirable and undesirable effects associated with MAS present a significant challenge for policy- and decision-makers in their justification to implement decommissioning options. Decisions may need to be decided on a case-by-case basis accounting for the trade-off in costs and benefits at a local level.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Opportunities for Industry to Provide Flexibility While Increasing Profitability

Supply and demand flexibility will both be needed to ensure the electricity system functions properly as the share from variable renewable generation continues to grow. Industrial manufacturing currently consumes about a third of primary energy worldwide, and electricity is projected to supply an increasing share of this demand as the global economy decarbonizes. Therefore, the ability for industry to flex demand poses an enticing opportunity to enable grid flexibility. However, large capital outlays prevent industry from voluntarily altering demand. Here we show that as battery costs continue to fall, industry will soon be able to profitably alter demand in accordance with electricity price variations. Focusing on two established industries– chlor-alkali and electric arc furnaces – and two industries with large future potential – methane pyrolysis and atmospheric CO 2 capture, we use a linear program (LP) optimization to assess the technoeconomic feasibility of flexible industrial demand across both historical and future-looking wholesale day-ahead marginal prices for the Electricity Reliability Council of Texas (ERCOT). We find positive net present values (NPV) from $\$$400K to $\$$50M using projected 2050 battery prices for industrial purchase of behind-the-meter batteries, using only arbitrage as a source of value. These results indicate that, with projected battery prices, profit-seeking industrial players could voluntarily play a future role in stabilizing a high-renewables grid where electricity prices act as accurate signals of grid needs.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

CMB-S4: Foreground-cleaning Pipeline Comparison for Measuring Primordial Gravitational Waves

We compare multiple foreground-cleaning pipelines for estimating the tensor-to-scalar ratio, r, using simulated maps of the planned CMB-S4 experiment within the context of the South Pole Deep Patch. To evaluate robustness, we analyze bias and uncertainty on r across various foreground suites using map-based simulations. The foreground-cleaning methods include: a parametric maximum likelihood approach applied to auto- and cross-power spectra between frequency maps; a map-based parametric maximum-likelihood method; and a harmonic-space internal linear combination using frequency maps. We summarize the conceptual basis of each method to highlight their similarities and differences. To better probe the impact of foreground residuals, we implement an iterative internal delensing step, leveraging a map-based pipeline to generate a lensing B-mode template from the large aperture telescope frequency maps. Our results show that the performance of the three approaches is comparable for simple and intermediate-complexity foregrounds, with σ(r) ranging from 3–5 ×10 −4 . However, biases at the 1σ–2σ level appear when analyzing more complex forms of foreground emission. By extending the baseline pipelines to marginalize over foreground residuals, we demonstrate that contamination can be reduced to within statistical uncertainties, albeit with a pipeline-dependent impact on σ(r), which translates to a detection significance between 2σ and 4σ for an input value of r = 0.003. These findings suggest varying levels of maturity among the tested pipelines, with the auto- and cross-spectra-based approach demonstrating the best stability and overall performance. Moreover, given the extremely low noise levels, mutual validation of independent foreground-cleaning pipelines is essential to ensure the robustness of any potential detection.

astronomy data analysis↗
DOE OSTI2026

Finite-range pairing in nuclear density functional theory

Pairing correlations are ubiquitous in low-energy states of atomic nuclei. To incorporate them within nuclear density functional theory, often used for global computations of nuclear properties, pairing functionals that generate nucleonic pair densities and pairing fields are introduced. Many pairing functionals currently used can be traced back to zero-range nucleon-nucleon interactions. Unfortunately, such functionals are plagued by deficiencies that become apparent in large model spaces that contain unbound single-particle (continuum) states. In particular, the underlying computational schemes diverge as the single-particle space increases, and the results depend on how marginally occupied states are incorporated. These problems become more pronounced for pairing functionals that contain gradient-density dependence, such as in the Fayans functional. To remedy this, finite-range pairing functionals are introduced. In this study, this is done by folding the pair density with Gaussians. Here, we show that a folding radius of about 1 fm offers the best compromise between quality and stability, and substantially reduces the pathological behavior in different numerical applications.

Nuclear density functional theory↗
DOE OSTI2021

A duality-based coupling of Cosserat crystal plasticity and phase field theories for modeling grain refinement

High-rate deformation processes of metals entail intense grain refinement and special attention needs to be paid to capture the evolution of microstructure. In this article, a new formulation for coupling Cosserat crystal plasticity and phase field is developed. A common approach is to penalize kinematic incompatibility between lattice orientation and displacement-based elastic rotation. However, this can lead to significant solution sensitivity to the penalty parameter, resulting in low accuracy and convergence rates. To address these issues, a duality-based formulation is developed which directly imposes the rotational kinematic compatibility. A weak inf-sup-based skew-symmetric stress projection is introduced to suppress instabilities present in the dual formulation. An additional least squares stabilization is introduced to suppress the spurious lattice rotation with a suitable parameter range derived analytically and validated numerically. The required high-order continuity is attained by the reproducing kernel approximation. It is observed that equal order displacement-rotation-phase field approximations are stable, which allows efficient employment of the same set of shape functions for all independent variables. The proposed formulation is shown to yield superior accuracy and convergence with marginal parameter sensitivity compared to the penalty-based approach and successfully captures the dominant rotational recrystallization mechanism including block dislocation structures and grain boundary migration.

42 ENGINEERING↗
DOE OSTI2024

The seventh blind test of crystal structure prediction: structure ranking methods

A seventh blind test of crystal structure prediction has been organized by the Cambridge Crystallographic Data Centre. The results are presented in two parts, with this second part focusing on methods for ranking crystal structures in order of stability. The exercise involved standardized sets of structures seeded from a range of structure generation methods. Participants from 22 groups applied several periodic DFT-D methods, machine learned potentials, force fields derived from empirical data or quantum chemical calculations, and various combinations of the above. In addition, one non-energy-based scoring function was used. Results showed that periodic DFT-D methods overall agreed with experimental data within expected error margins, while one machine learned model, applying system-specific AIMnet potentials, agreed with experiment in many cases demonstrating promise as an efficient alternative to DFT-based methods. For target XXXII, a consensus was reached across periodic DFT methods, with consistently high predicted energies of experimental forms relative to the global minimum (above 4 kJ mol −1 at both low and ambient temperatures) suggesting a more stable polymorph is likely not yet observed. The calculation of free energies at ambient temperatures offered improvement of predictions only in some cases (for targets XXVII and XXXI). Several avenues for future research have been suggested, highlighting the need for greater efficiency considering the vast amounts of resources utilized in many cases.

Chemistry↗
DOE OSTI2025

A review of Geological Thermal Energy Storage for seasonal, grid-scale dispatching

Energy storage is essential for the decarbonization of the U.S. energy grid, especially with the increasing deployment of variable renewable energy sources like solar and wind. Geological thermal energy storage (GeoTES) has emerged as a promising long duration, grid scale solution, providing stability and security through flexible operations and valuable grid services. GeoTES utilizes subsurface reservoirs to store thermal energy for power generation and direct-use heating and cooling. This approach significantly enhances the use of low-temperature reservoirs, which would otherwise be unsuitable for geothermal power plants. It also aligns well with depleted oil and gas reservoirs, concentrating solar power, non-flexible renewables (photovoltaic and wind), and geothermal-related power cycles. Given the favorable marginal costs of GeoTES as storage duration increases, it becomes particularly competitive for seasonal, grid-scale dispatch, where few technologies are viable. This paper provides a comprehensive review of GeoTES systems and the research underpinning itsr development. This analysis begins by defining and categorizing the unique characteristics of thermal energy storage techniques, setting GeoTES apart from other technologies. The various components, configurations, subsurface characteristics, and modeling efforts that guide GeoTES development are then explored. Finally, challenges in GeoTES research, development, and deployment are discussed, along with mitigation strategies and lessons from related technologies. Beyond their economic benefits, GeoTES systems support grid resilience and decarbonize industrial processes. Their scalability, broad distribution, seasonal storage potential, and flexible dispatch capacity make GeoTES a valuable tool for expanding renewable energy deployment and addressing climate change.

15 - GEOTHERMAL ENERGY↗
DOE OSTI2021

Solar mirrors and methods of making solar mirrors having improved properties

A solar reflective mirror includes a parting film between solar reflecting sublayers to improve optics and stability of the solar mirror. The coating stack of the solar reflector mirror is encapsulated to increase the useable life of the solar mirror, and to eliminate the need for a permanent protection overcoat. Omission of the PPO film which is electrically non-conductive makes the coating stack electrically conductive eliminating the need for a two layer encapsulant when the encapsulant is e-coated.Another feature of the invention is applying the base coat of the encapsulant over the marginal edges of the PPO film leaving a center section without coverage and adding the top coating of the encapsulant over the base coat and the uncoated area.

Medwick, Paul A.↗
DOE OSTI2021

Methane Hydrate Formation and Evolution During Sedimentation

We explored methane hydrate formation with sedimentation with a newly developed one-dimensional, multiphase flow, multicomponent transport numerical model. Our model couples methane hydrate formation from in situ microbial methane generation within the hydrate stability zone (HSZ), methane recycling, and microbial methane generation below the base of the hydrate stability zone (BHSZ). Both recycled methane and deeply generated methane are transported into the HSZ by buoyancy-driven free gas flow. Free gas flows through the HSZ by both the processes of capillary-dependent pore fillings and by salt exclusion during hydrate formation, with the former being the dominant mechanism. We quantitively illustrated the formation of enriched hydrate in muddy sediments above, and interconnected free gas below, the BHSZ, which are common features along the world's continental margin. In addition, we showed two ways to form concentrated methane hydrate above the BHSZ. The first mechanism is local free gas flow during methane recycling. This happens at sites with sufficient methane generation above the BHSZ. The second mechanism is deep microbial methane generation which is transported into the HSZ by free gas flow. This mechanism plays a more important role at sites with high sedimentation rates. This study provides new insights into methane hydrate formation and distribution below the seafloor. It is important for understanding the carbon cycle and carbon storage below the seafloor and for resource evaluation and exploitation.

58 GEOSCIENCES↗