Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solid dissolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Mathematical models as tools for probing long-term safety of CO2 storage

Subsurface reservoirs being considered for storing CO{sub 2} include saline aquifers, oil and gas reservoirs, and unmineable coal seams (Baines and Worden, 2004; IPCC, 2005). By far the greatest storage capacity is in saline aquifers (Dooley et al., 2004), and our discussion will focus primarily on CO{sub 2} storage in saline formations. Most issues for safety and security of CO{sub 2} storage arise from the fact that, at typical temperature and pressure conditions encountered in terrestrial crust, CO{sub 2} is less dense than aqueous fluids. Accordingly, CO{sub 2} will experience an upward buoyancy force in most subsurface environments, and will tend to migrate upwards whenever (sub-)vertical permeable pathways are available, such as fracture zones, faults, or improperly abandoned wells (Bachu, 2008; Pruess, 2008a, b; Tsang et al., 2008). CO{sub 2} injection will increase fluid pressures in the target formation, thereby altering effective stress distributions, and potentially triggering movement along fractures and faults that could increase their permeability and reduce the effectiveness of a caprock in containing CO{sub 2} (Rutqvist et al., 2008; Chiaramonte et al., 2008). Induced seismicity as a consequence of fluid injection is also a concern (Healy et al., 1968; Raleigh et al., 1976; Majer et al., 2007). Dissolution of CO{sub 2} in the aqueous phase generates carbonic acid, which may induce chemical corrosion (dissolution) of minerals with associated increase in formation porosity and permeability, and may also mediate sequestration of CO{sub 2} as solid carbonate (Gaus et al., 2008). Chemical dissolution of caprock minerals could promote leakage of CO{sub 2} from a storage reservoir (Gherardi et al., 2007). Chemical dissolution and geomechanical effects could reinforce one another in compromising CO{sub 2} containment. Additional issues arise from the potential of CO{sub 2} to mobilize hazardous chemical species (Kharaka et al., 2006), and from migration of the large amounts of brine that would be mobilized by industrial-scale CO{sub 2} injection (Nicot et al., 2008; Birkholzer et al., 2008a, b).

54 ENVIRONMENTAL SCIENCES↗

Simple Kinetic Monte Carlo Models for Dissolution Pitting Induced by Crystal Defects

The solid-on-solid kinetic Monte Carlo model of Lasaga and Blum for dislocation- controlled etch pit growth has been extended to the growth of etch pits under the control of multiple dislocations and point defects. This has required the development of algorithms that are 0(103) – O(104) times faster than primitive kinetic Monte Carlo models for surfaces with areas in the range 1024x1024 – 4096x4096 lattice sites. Simulations with multiple line defects indicate that the surface morphology coarsens with increasing time and that the coarsening is more pronounced for large bond-breaking activation energies. For small bond breaking activation energies dissolution enhanced by line defects perpendicular the dissolving surface results in pits with steep sides terminated by deep narrow hollow tubes (nanopipes). Larger bond breaking activation energies lead to shallow pits without deep nanopipes, and if the bond breaking activation energy is large enough, step flow is the primary dissolution mechanism, and pit formation is suppressed. Simplified models that neglect the far field strain energy density but include either a rapidly dissolving core or an empty core lead to results that are qualitatively similar to those obtained using models that include the effects of the far field stress and strain. Simulations with a regular array of line defects show that microscopic random thermal fluctuations play an important role in the coarsening process.

36 MATERIALS SCIENCE↗

Dissolution and Separation of Aluminum and Aluminosilicates

The selection of an aluminum alloy for target irradiation affects post-irradiation target dissolution and separations. Recent tests with aluminum alloy 6061 yielded greater than expected precipitation in the dissolver, forming up to 10 wt.% solids of aluminum hydroxides and aluminosilicates. Aluminosilicate dissolution presents challenges in a number of different areas, metals extraction from minerals, flyash treatment, and separations from aluminum alloys. We present experimental work that attempts to maximize dissolution of aluminum metal, along with silicon, magnesium, and copper impurities, through control of temperature, the rate of reagent addition, and incubation time. Aluminum phase transformations have been identified as a function of time and temperature, using X-ray diffraction. Solutions have been analyzed using wet chemical methods and X-ray fluorescence. Our data have been compared with published calculations of aluminum phase diagrams. Approaches are given to enhance the dissolution of aluminum and aluminosilicate phases in caustic solution.

36 MATERIALS SCIENCE↗

Results of Characterization and Retrieval Testing on Tank 241-C-110 Heel Solids

Nine samples of heel solids from tank 241-C-110 were delivered to the 222-S Laboratory for characterization and dissolution testing. After being drained thoroughly, the sample solids were primarily white to light-brown with minor dark-colored inclusions. The maximum dimension of the majority of the solids was <2 mm; however, numerous pieces of aggregate, microcrystalline, and crystalline solids with maximum dimensions ranging from 5-70 mm were observed. In general, the larger pieces of aggregate solids were strongly cemented.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Lithium-ion battery physics and statistics-based state of health model

A pseudo-2d model using COMSOL Multiphysics® software is developed to simulate performance and performance degradation of Li-ion batteries consisting of layered and olivine cathodes with graphite anode when subjected to peak shaving grid service. Multiple degradation pathways are considered, including solid electrolyte interphase (SEI) formation and breakdown at the anode, cathode dissolution and its synergistic effect on SEI formation at the anode. The model is validated by simulating commercial cylindrical cell performance. A global model is developed to simulate performance across all chemistries, along with individual chemistry models using global model parameters as initial values. There is good agreement between these models for various optimization parameters such as SEI equilibrium potential, cathode dissolution exchange current density, solvent diffusivity in the SEI and SEI ionic conductivity. To circumvent time constraints related to the COMSOL model, a 0d global model is developed which fits data well and provides more clarity on differences in cathode dissolution exchange current density. Again, good agreement for various optimization parameters is obtained among the COMSOL global & individual chemistry models and the 0-d model. The lessons learned from the physics-based model is used to develop a top down statistics-based model using current, voltage and anode volumetric change per mole lithium intercalated, along with their interactions as degradation predictors. This model predicts out of sample degradation for multiple grid services and electric vehicle drive cycle with high accuracy and provides the pathway to develop an efficient battery management system combining machine learning and findings from physics-based computationally intensive algorithms.

Crawford, Aladsair J.↗

Treatment of Magnesium-Thorium Alloy Used in Military Defence Equipment by Separation of Thorium and/or Thermal Oxidation - 17009

Magnesium-alloys doped with thorium (Th, 3% by weight and with a total activity content in the alloy of 120 Bq/g) to improve mechanical properties has been used in, among other applications, military equipment such as in the jet-engines in military aircraft. The material cannot, due to the presence of the radioactive Th, be handled as an ordinary scrap metal. It needs to be treated to render a more stable waste form prior to final disposal in which the amount of disposed metallic magnesium is limited due to the pyrophoric properties of such type of materials. By thermally treating the material it is possible to transform the alloy into oxide form (MgO and ThO{sub 2}) which is a much more stable form than metallic. This itself enables a form suitable for final disposal of the material. The oxidation step does however lead to an increase in volume and is therefore not an optimal treatment method. It is possible to treat the metal oxide powder in order to get a better volume reduction such as by super compaction but a better result can be obtained by separating the Th from the alloy, leaving a much smaller volume for final disposal. One way of separating the Th from the metal is by dissolution of metallic material in acid followed by directed precipitation of Th as Th-oxalate. Several parameters such as the choice of acid, metal concentration in the acid solution, pH prior to precipitation and amount of added oxalic acid have been investigated. Another method to separate Th from Mg is to perform a selective dissolution of MgO from an MgO/ThO{sub 2} mixture with HNO{sub 3} leaving only ThO{sub 2} as a residue. These tests had to be preceded with an oxidation of the alloy. The tests show that it is possible to separate Th from the metal alloy by either dissolution followed by precipitation or selective dissolution of MgO from an MgO/ThO{sub 2} mixture. This leads to very effective volume reduction of the waste. For the direct dissolution and precipitation tests typically > 95% of the magnesium can be found in the acid solution while 99.5 % of the Th is found as a solid in the filters. For the oxide dissolution tests typically 98% of the Th can be separated from the bulk material, leaving the acid solution possible to free release and dispose of in the same way as for the previous method. (authors)

36 MATERIALS SCIENCE↗

Dissolution and initial hydration behavior of tricalcium aluminate in low activity sulfate solutions

Influences of alkali or alkaline earth sulfates on the hydration of cubic tricalcium aluminate (C 3 A) were evaluated by in situ dissolution rate measurements, by ex situ near-surface composition measurements with secondary ion mass spectrometry, and by in situ synchrotron X-ray diffraction to monitor precipitation of hydration products. Both slight reductions in dissolution rate and cation-specific interactions with the solid were observed. The near-surface Ca/Al ratio is significantly lower after some dissolution and the electrolyte cations are incorporated within the surface with different affinities (Mg 2+ > K + > Na + ). An interfacial dissolution-reprecipitation mechanism may explain the observations as well as, or better than, a simple cation exchange. The sulfate concentration in solution affects the rates of both C 3 A dissolution and precipitation of hydration products. Aditionally, sulfate ions likely adsorb at the hydrous Al-rich surface layer, thereby reducing the dissolution rate of aluminates and delaying the precipitation of aluminate hydration products.

36 MATERIALS SCIENCE↗

On the dissolution of iridium by aluminum.

The potential for liquid aluminum to dissolve an iridium solid is examined. Substantial uncertainties exist in material properties, and the available data for the iridium solubility and iridium diffusivity are discussed. The dissolution rate is expressed in terms of the regression velocity of the solid iridium when exposed to the solvent (aluminum). The temperature has the strongest influence in the dissolution rate. This dependence comes primarily from the solubility of iridium in aluminum and secondarily from the temperature dependence of the diffusion coefficient. This dissolution mass flux is geometry dependent and results are provided for simplified geometries at constant temperatures. For situations where there is negligible convective flow, simple time-dependent diffusion solutions are provided. Correlations for mass transfer are also given for natural convection and forced convection. These estimates suggest that dissolution of iridium can be significant for temperatures well below the melting temperature of iridium, but the uncertainties in actual rates are large because of uncertainties in the physical parameters and in the details of the relevant geometries.

Hewson, John C.↗

Hot-melt extrudability of amorphous solid dispersions of flubendazole-copovidone: An exploratory study of the effect of drug loading and the balance of adjuvants on extrudability and dissolution

The FDA-approved anthelmintic flubendazole has shown potential to be repositioned to treat cancer and dry macular degeneration; however, its poor water solubility limits its use. Amorphous solid dispersions may overcome this challenge, but the balance of excipients may impact the preparation method and drug release. Here, we evaluate the influence of adjuvants and drug loading on the development of an amorphous solid dispersion of flubendazole-copovidone by hot-melt extrusion. The drug, copovidone, and adjuvants (magnesium stearate and hydroxypropyl cellulose) mixtures were statistically designed, and the process was performed in a twin-screw extruder. The study showed that flubendazole and copovidone mixtures were highly extrudable, except when drug loading was high (>40%). Furthermore, magnesium stearate positively impacted the extrusion and was more effective than hydroxypropyl cellulose. The extruded materials were evaluated by modulated differential scanning calorimetry and X-ray powder diffraction, obtaining positive amorphization and physical stability results. Pair distribution function analysis indicated the presence of drug rich domains with medium-range order structure and no evidence of polymer-drug interaction. All extrudates presented faster dissolution (HCl, pH 1.2) than pure flubendazole, and both adjuvants had a notable influence on the dissolution rate. In conclusion, hot-melt extrusion may be a viable option to obtain stable flubendazole: copovidone amorphous dispersions.

60 APPLIED LIFE SCIENCES↗

Replacement of Calcite (CaCO 3 ) by Cerussite (PbCO 3 )

The mobility of toxic elements, such as lead (Pb) can be attenuated by adsorption, incorporation, and precipitation on carbonate minerals in subsurface environments. Here in this paper, we report a study of the bulk transformation of single-crystal calcite (CaCO 3 ) into polycrystalline cerussite (PbCO 3 ) through reaction with acidic Pb-bearing solutions. This reaction began with the growth of a cerussite shell on top of calcite surfaces followed by the replacement of the remaining calcite core. The external shape of the original calcite was preserved by a balance between calcite dissolution and cerussite growth controlled by adjusting the Pb 2+ concentration and pH. The relation between the rounded calcite core and the surrounding lath-shaped cerussite aggregates was imaged by transmission X-ray microscopy, which revealed preferentially elongated cerussite crystals parallel to the surface and edge directions of calcite. The replacement reaction involved concurrent development ~100 nm wide pores parallel to calcite c-glide or (1$\overline{20}$) planes, which may have provided permeability for chemical exchange during the reaction. X-ray reflectivity measurements showed no clear epitaxial relation of cerussite to the calcite (104) surface. These results demonstrate Pb sequestration through mineral replacement reactions and the critical role of nanoporosity (3% by volume) on the solid phase transformation through a dissolution-recrystallization mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Situ Study of Atomic Structure Transformations of Pt-Ni Nanoparticle Catalysts during Electrochemical Potential Cycling

When exposed to corrosive anodic electrochemical environments, Pt alloy nanoparticles (NPs) undergo selective dissolution of the less noble component, resulting in catalytically active bimetallic Pt-rich core–shell structures. Structural evolution of PtNi 6 and PtNi 3 NP catalysts during their electrochemical activation and catalysis was studied by in situ anomalous small-angle X-ray scattering to obtain insight in element-specific particle size evolution and time-resolved insight in the intraparticle structure evolution. Ex situ high-energy X-ray diffraction coupled with pair distribution function analysis was employed to obtain detailed information on the atomic-scale ordering, particle phases, structural coherence lengths, and particle segregation. Our studies reveal a spontaneous electrochemically induced formation of PtNi particles of ordered Au 3 Cu-type alloy structures from disordered alloy phases (solid solutions) concomitant with surface Ni dissolution, which is coupled to spontaneous residual Ni metal segregation during the activation of PtNi 6 . Pt-enriched core–shell structures were not formed using the studied Ni-rich nanoparticle precursors. In contrast, disordered PtNi 3 alloy nanoparticles lose Ni more rapidly, forming Pt-enriched core–shell structures with superior catalytic activity. Our X-ray scattering results are confirmed by STEM/EELS results on similar nanoparticles.

Tuaev, Xenia↗

Effect of Bicarbonate, Calcium, and pH on the Reactivity of As(V) and U(VI) Mixtures

Natural or anthropogenic processes can increase the concentration of uranium (U) and arsenic (As) above the maximum contaminant levels in water sources. Bicarbonate and calcium (Ca) can have major impacts on U speciation and can affect the reactivity between U and As. We therefore investigated the reactivity of aqueous U and As mixtures with bicarbonate and Ca for acidic and neutral pH conditions. In experiments performed with 1 mM U and As mixtures, 10 mM Ca, and without added bicarbonate (pCO 2 = 3.5), aqueous U decreased to <0.25 mM at pH 3 and 7. Aqueous As decreased the most at pH 3 (~0.125 mM). Experiments initiated with 0.005 mM As and U showed similar trends. X-ray spectroscopy (i.e., XAS and EDX) and diffraction indicated that U-As-Ca- and U-Ca-bearing solids resemble uranospinite [Ca(UO 2 ) 2 (AsO 4 ) 2 ·10H 2 O] and becquerelite [Ca(UO 2 ) 6 O 4 (OH) 6 ·8(H 2 O)]. These findings suggest that U-As-Ca-bearing solids formed in mixed solutions are stable at pH 3. However, the dissolution of U-As-Ca and U-Ca-bearing solids at pH 7 was observed in reactors containing 10 mM bicarbonate and Ca, suggesting a kinetic reaction of aqueous uranyl-calcium-carbonate complexation. Our study provides new insights regarding U and As mobilization for risk assessment and remediation strategies.

54 ENVIRONMENTAL SCIENCES↗

Some Fundamental Experiments on Apparent Dissolution Rate of Gas Phase in the Groundwater Recovery Processes of the Geological Disposal System - 12146

The apparent dissolution rates of gas phase in the co-presence of solid phase were examined by in-room experiments in this study. The apparent dissolution rate of gas phase q (mol/m{sup 3}.s) was generally defined by q=aK{sub L}(γP{sub g}-c), where a (1/m) is specific surface area of the interface between gas and liquid phases, K{sub L} (m/s) is overall mass transfer coefficient, γ (mol/(Pa.m{sup 3})) is reciprocal number of Henry constant, P{sub g} (Pa) is partial pressure of gas phase, and c (mol/m{sup 3}) is the concentration of gas component in liquid phase. As a model gas, CO{sub 2} gas was used. For evaluating the values of K{sub L}, this study monitored pH or the migration rate of the interface between water/gas phases, using some experiments such as the packed beds and the micro channel consisting of granite chip and rubber sheet including a slit. In the results, the values of K{sub L} were distributed in the range from 5.0x10{sup -6} m/s to 5.0x10{sup -7} m/s. These values were small, in comparison with that (7.8x10{sup -4} m/s) obtained from the bubbling test where gas phase was continually injected into deionized water without solid phase. This means that the solid phase limits the local mixing of water phase near gas-liquid interfaces. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effects of Anion Mobility on Electrochemical Behaviors of Lithium–Sulfur Batteries

The electrolyte is a crucial component of lithium-sulfur (Li-S) batteries, as it controls polysulfide dissolution, charge shuttling processes, and solid-electrolyte interphase (SEI) layer formation. Experimentally, the overall performance of Li-S batteries varies with choice of solvent system and Li-salt used in the electrolyte, and a lack of predictive understanding about the effects of individual electrolyte components inhibits the rational design of electrolytes for Li-S batteries. Here we analyze the role of the counter anions of common Li salts (such as TfO-, FSI-, TFSI-, and TDI-) when dissolved in DOL/DME (1:1 vol.) for use in Li-S batteries. The evolution of ion-ion and ion-solvent interactions due to vari-ous anions was analyzed using 17O NMR and pulsed-field gradient (PFG) NMR and then correlated with electrochemi-cal performance in Li-S cells. These data reveal that the for-mation of the passivation layer on the anode and the loss of active materials from the cathode (evidenced by polysulfide dissolution) are related to anion mobility and affinity with lithium polysulfide, respectively. For future electrolyte de-sign, anions with lower mobility and weaker interactions with lithium polysulfides may be superior candidates for increasing the long-term stability of Li-S batteries.

25 ENERGY STORAGE↗

FLOWSHEET FOR ALUMINUM REMOVAL FROM SLUDGE BATCH 6

Samples of Tank 12 sludge slurry show a substantially larger fraction of aluminum than originally identified in sludge batch planning. The Liquid Waste Organization (LWO) plans to formulate Sludge Batch 6 (SB6) with about one half of the sludge slurry in Tank 12 and one half of the sludge slurry in Tank 4. LWO identified aluminum dissolution as a method to mitigate the effect of having about 50% more solids in High Level Waste (HLW) sludge than previously planned. Previous aluminum dissolution performed in a HLW tank in 1982 was performed at approximately 85 C for 5 days and dissolved nearly 80% of the aluminum in the sludge slurry. In 2008, LWO successfully dissolved 64% of the aluminum at approximately 60 C in 46 days with minimal tank modifications and using only slurry pumps as a heat source. This report establishes the technical basis and flowsheet for performing an aluminum removal process in Tank 51 for SB6 that incorporates the lessons learned from previous aluminum dissolution evolutions. For SB6, aluminum dissolution process temperature will be held at a minimum of 65 C for at least 24 days, but as long as practical or until as much as 80% of the aluminum is dissolved. As planned, an aluminum removal process can reduce the aluminum in SB6 from about 84,500 kg to as little as 17,900 kg with a corresponding reduction of total insoluble solids in the batch from 246,000 kg to 131,000 kg. The extent of the reduction may be limited by the time available to maintain Tank 51 at dissolution temperature. The range of dissolution in four weeks based on the known variability in dissolution kinetics can range from 44 to more than 80%. At 44% of the aluminum dissolved, the mass reduction is approximately 1/2 of the mass noted above, i.e., 33,300 kg of aluminum instead of 66,600 kg. Planning to reach 80% of the aluminum dissolved should allow a maximum of 81 days for dissolution and reduce the allowance if test data shows faster kinetics. 47,800 kg of the dissolved aluminum will be stored in Tank 8 and 21,000 kg will be stored in saltcake via evaporation. Up to 77% of the total aluminum planned for SB6 may be removed via aluminum dissolution. Storage of the aluminum-laden supernate in Tank 8 will require routine evaluation of the free hydroxide concentration in order to maintain aluminum in solution. Periodic evaluation will be established on concurrent frequency with corrosion program samples as previously established for aluminum-laden supernate from SB5 that is stored in Tank 11.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A Kinetic Model for Dissolution of Zinc Oxide Powder Obtained from Waste Alkaline Batteries in Sodium Hydroxide Solutions

The determination of individual dissolution behaviors of zinc and manganese in waste alkaline battery powders is an important subject from the points of the leaching yield, design of leaching reactor, and separation and recovery steps of hydrometallurgical process. In the current study, we investigated the dissolution kinetics of zinc oxide powder. Zinc oxide was obtained from waste alkaline batteries, and sodium hydroxide solutions were used as solvent. In the experiments, the effects of solution concentration, reaction temperature, stirring speed, solid-to-liquid ratio, and particle size on the dissolution of zinc oxide were investigated. It was demonstrated that the dissolution increased with the increasing concentration, reaction temperature, and stirring speed, and with the decreasing solid-to-liquid ratio and particle size. In consequence of the kinetic analysis performed, it was found that the dissolution kinetics of zinc powder obeyed the Avrami model. Activation energy for the process was determined to be 19.42 kJ/mol. Zinc ions in the resulting solution after dissolution process was recovered in the form of hydroxy-carbonate product by precipitation method. Zinc oxide was produced by isothermal decomposition of hydroxy-carbonate product.

36 MATERIALS SCIENCE↗

Insights into the Mechanism of Neptunium Oxidation to the Heptavalent State

Abstract Neptunium can exist in multiple oxidation states, including the rare and poorly understood heptavalent form. In this work, we monitored the formation of heptavalent neptunium [Np(VII)O 4 (OH) 2 ] 3− during ozonolysis of aqueous M OH ( M =Li, Na, K) solutions using a combined experimental and theoretical approach. All experimental reactions were closely monitored via absorption and vibrational spectroscopy to follow both the oxidation state and the speciation of neptunium guided by the calculated vibrational frequencies for various neptunium species. The mechanism of the reaction partly involves oxidative dissolution of transient Np(VI) oxide/hydroxide solid phases, the identity of which are dependent on the co‐precipitating counter‐cation Li + /Na + /K + . Additional calculations suggest that the most favorable energetic pathway occurs through the reaction of a [Np(V)O 2 (OH) 4 ] 3− with the hydroxide radical to form [Np(VI)O 2 (OH) 4 ] 2− , followed by an additional oxidation with HO⋅ to create [Np(VII)O 4 (OH) 2 ] 3− .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anion Exchange in Cationic Frameworks: Structures of Channel-Forming Triarylpyrylium Tetrafluoroborate Salts

The crystal structure of a co-crystal of 2,4,6-tris(4-methylphenyl)pyridine and 2,4,6-tris(4-methylphenyl)pyrylium revealed a pseudohexagonal motif assembled from π-stacked helices that enclose 1-D channels containing disordered tetrafluoroborate counterions and solvent molecules. Though convoluted by disorder, aperiodicity, and complex twinning patterns, further investigation was motivated by the unique packing arrangement of this material, which enables solid-state anion diffusion, while resisting dissolution in water. Such properties are ideal for the development of anion exchange materials that can be employed for the remediation of agricultural and nuclear waste. Here, to develop a more complete understanding of the intermolecular interactions that give rise to this helical motif, we have compiled and analyzed the local interactions and extended structural motifs of 19 pore- and channel-forming 2,4,6-triarylpyrylium crystal structures. Here, three conserved local interactions were identified, including C–H···X– interactions, the rhombic binding pocket, and four-ring antiparallel dimerization. Development of this library of interaction motifs rationalizes the packing arrangement of the co-crystal and contributes to the informed design of anion exchange materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗