Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shell Solar”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Monolithic III-V Nanowire Solar Cells on Graphene via Direct van der Waals Epitaxy

Novel solar cells, based on dense arrays of InGaAs nanowires, are grown directly on graphene. Furthermore, graphene serves as the conductive back contact and growth template for van der Waals epitaxial assembly of vertical nanowires. Although far from being the optimum material, core-shell p–n junction In0.25Ga0.75As nanowire arrays demonstrate a conversion efficiency of 2.51%, representing a new record for substrate-free, III-V nanowire-based solar cells.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Ambient energy for buildings: Beyond energy efficiency

The following Key Messages comprise the salient findings of this study: 1. Ambient energy (from sun, air, ground, and sky) can heat and cool buildings; provide hot water, ventilation and daylighting; dry clothes; and cook food. These services account for about three-quarters of building energy consumption and a third of total US demand. Biophilic design (direct and indirect connections with nature) is an intrinsic adjunct to ambient energy systems, and improves wellness and human performance. 2. The current strategy of electrification and energy efficiency for buildings will not meet our climate goals, because the transition to an all-renewable electric grid is too slow. Widespread adoption of ambient energy is needed. Solar-heated buildings also flatten the seasonal demand for electricity compared to all-electric buildings, reducing required production capacity and long-term energy storage. In addition, ambient-conditioned buildings improve resilience by remaining livable during power outages. 3. National policies, incentives, and marketing should be enacted to promote ambient energy use. Federal administrative priorities should reflect the importance of ambient energy for buildings. Use of ambient energy should be encouraged through existing and new building codes and standards. 4. Ambient energy system design tools are needed for architects, engineers, builders, building scientists, realtors, appraisers, and consumers. PVWatts is used over 100 million times per year for photovoltaic system design. A similar, simple, and accessible tool for ambient design is crucial. 5. Training on ambient energy is needed throughout secondary, post-secondary, and continuing education for workforce development. Currently, only about 10% of colleges teach courses on passive heating and cooling systems. 6. Ambient-conditioned buildings should be demonstrated in all US climate zones. Performance should be monitored and reported, with quantitative case studies made widely available. 7. While current technology is sufficient to build high-performance ambient buildings now, research is needed to develop new technologies to harness ambient energy more effectively and more economically. Such advancements will facilitate adoption of ambient energy technologies in a wider range of buildings, including retrofits. Examples include windows with much lower thermal losses, use of the building shell as thermal storage, alternative light-weight thermal storage systems, sky radiation cooling systems, automated controls for solar gains and passive cooling, and ground coupling.

14 SOLAR ENERGY↗
DOE OSTI2019

Prototype Testing of Encapsulated Phase Change Material Thermal Energy Storage (EPCM-TES) for Concentrated Solar Power

In the present study, experimental investigations were conducted on encapsulated phase-change material (EPCM) capsules from Terrafore Technologies. Several aspects of the EPCM capsules were evaluated, including shell fracture stress under compression and melting/solidification performance. The stress testing was conducted with the Instron universal test system, and the melting/solidification testing was conducted in Argonne National Laboratory’s high-temperature thermal energy storage test system. Results on the EPCM fracture stress, the melting/solidification characteristics of the EPCM capsules, the temperature repeatability under similar test conditions, and the heat balance for melting/solidification processes are presented in this report.

14 SOLAR ENERGY↗
DOE OSTI2016

COUPLING OF CORONAL AND HELIOSPHERIC MAGNETOHYDRODYNAMIC MODELS: SOLUTION COMPARISONS AND VERIFICATION

Two well-established magnetohydrodynamic (MHD) codes are coupled to model the solar corona and the inner heliosphere. The corona is simulated using the MHD algorithm outside a sphere (MAS) model. The Lyon–Fedder–Mobarry (LFM) model is used in the heliosphere. The interface between the models is placed in a spherical shell above the critical point and allows both models to work in either a rotating or an inertial frame. Numerical tests are presented examining the coupled model solutions from 20 to 50 solar radii. The heliospheric simulations are run with both LFM and the MAS extension into the heliosphere, and use the same polytropic coronal MAS solutions as the inner boundary condition. The coronal simulations are performed for idealized magnetic configurations, with an out-of-equilibrium flux rope inserted into an axisymmetric background, with and without including the solar rotation. The temporal evolution at the inner boundary of the LFM and MAS solutions is shown to be nearly identical, as are the steady-state background solutions, prior to the insertion of the flux rope. However, after the coronal mass ejection has propagated through the significant portion of the simulation domain, the heliospheric solutions diverge. Additional simulations with different resolution are then performed and show that the MAS heliospheric solutions approach those of LFM when run with progressively higher resolution. Following these detailed tests, a more realistic simulation driven by the thermodynamic coronal MAS is presented, which includes solar rotation and an azimuthally asymmetric background and extends to the Earth’s orbit.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

Mathematical model of testing of pipeline integrity by thermal fields

Thermal fields testing at the ground surface above a pipeline are considered. One method to obtain and investigate an ideal thermal field in different environments is a direct numerical simulation of heat transfer processes taking into account the most important physical factors. In the paper a mathematical model of heat propagation from an underground source is described with accounting of physical factors such as filtration of water in soil and solar radiation. Thermal processes are considered in 3D origin where the heat source is a pipeline with constant temperature and non-uniform isolated shell (with 'damages'). This problem leads to solution of heat diffusivity equation with nonlinear boundary conditions. Approaches to analysis of thermal fields are considered to detect damages.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2019

Cu-Catalyzed Synthesis of CdZnSe–CdZnS Alloy Quantum Dots with Highly Tunable Emission

Fabrication of quantum dots (QDs) with emission covering a wide spectral region has been persistently intriguing because of their potentials in a range of practical applications such as biological labeling and imaging, solar cells, light-emitting diodes, and next-generation displays. We report the synthesis of CdZnSe–CdZnS core–shell alloy QDs through a Cu-catalyzed solid solution alloying strategy starting from CdSe–CdS core–shell QDs. The resulting CdZnSe–CdZnS alloy QDs exhibit emission profiles covering a wide wavelength range of 470–650 nm while maintaining high photoluminescence quantum yields. In addition, high morphological uniformity of the starting CdSe–CdS QDs can be largely retained in the final alloy QDs. We attribute this alloying process to the high mobility nature of Cu cations in Cd-chalcogenide crystals at elevated reaction temperatures, which allows Cu cations to act as transporting agents to transfer a Zn component into the CdSe–CdS QDs while maintaining the particle integrity. We show that this unique alloying strategy is independent of the shape of the starting QDs and can also be applied to the synthesis of CdZnSe–CdZnS nanorods. We anticipate that our study will instigate the synthesis of various high-quality alloy QDs and other alloy nanocrystals beyond what can be achieved currently.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Design of Heterogeneous Chalcogenide Nanostructures with Pressure-Tunable Gaps and without Electronic Trap States

Heterogeneous nanostructures, such as quantum dots (QDs) embedded in solid matrices or core–shell nanoparticles, are promising platforms for a wide variety of applications, including phosphors with increased quantum yield, photocatalysis, and solar energy conversion. However, characterizing and controlling their interfacial morphology and defects, which greatly influence their electronic properties, have proven difficult in numerous cases. Here we carried out atomistic calculations on chalcogenide nanostructured materials, i.e., PbSe QDs in CdSe matrices and CdSe embedded in PbSe, and we established how interfacial and core structures affect their electronic properties. In particular, we showed that defects present at interfaces of PbSe nanoparticles and CdSe matrices give rise to detrimental intragap states, degrading the performance of photovoltaic devices. Instead, the electronic gaps of the inverted system (CdSe dots in PbSe) are clean, indicating that this material has superior electronic properties for solar applications. In addition, our calculations predicted that the core structure of CdSe and in turn its band gap may be tuned by applying pressure to the PbSe matrix, providing a means to engineering the properties of new functional materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2012

SPECTRAL PROPERTIES OF {approx}0.5-6 keV ENERGETIC NEUTRAL ATOMS MEASURED BY THE INTERSTELLAR BOUNDARY EXPLORER (IBEX) ALONG THE LINES OF SIGHT OF VOYAGER

Energetic neutral atoms (ENAs) observed by the Interstellar Boundary Explorer (IBEX) provide powerful diagnostics about the origin of the progenitor ion populations and the physical mechanisms responsible for their production. Here we survey the fluxes, energy spectra, and energy dependence of the spectral indices of {approx}0.5-6 keV ENAs measured by IBEX-Hi along the lines of sight of Voyager 1 and 2. We compare the ENA spectra observed at IBEX with predictions of Zank et al. who modeled the microphysics of the heliospheric termination shock to predict the shape and relative contributions of three distinct heliosheath ion populations. We show that (1) the ENA spectral indices exhibit similar energy dependence along V1 and V2 directions-the spectrum hardens to {gamma} {approx} 1 between {approx}1 and 2 keV and softens to {gamma} {approx} 2 below {approx}1 keV and above {approx}2 keV, (2) the observed ENA fluxes agree to within {approx}50% of the Zank et al. predictions and are unlikely to be produced by core solar wind (SW) ions, and (3) the ENA spectra do not exhibit sharp cutoffs at {approx}twice the SW speed as is typically observed for shell-like pickup ion (PUI) distributions in the heliosphere. We conclude that ENAs at IBEX are generated by at least two types of ion populations whose relative contributions depend on the ENA energy: transmitted PUIs in the {approx}0.5-5 keV energy range and reflected PUIs above {approx}5 keV energy. The {approx}0.5-5 keV PUI distribution is probably a superposition of Maxwellian or kappa distributions and partially filled shell distributions in velocity space.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2012

DETECTION OF THE SECOND r-PROCESS PEAK ELEMENT TELLURIUM IN METAL-POOR STARS ,

Using near-ultraviolet spectra obtained with the Space Telescope Imaging Spectrograph on board the Hubble Space Telescope, we detect neutral tellurium in three metal-poor stars enriched by products of r-process nucleosynthesis, BD +17 3248, HD 108317, and HD 128279. Tellurium (Te, Z = 52) is found at the second r-process peak (A Almost-Equal-To 130) associated with the N = 82 neutron shell closure, and it has not been detected previously in Galactic halo stars. The derived tellurium abundances match the scaled solar system r-process distribution within the uncertainties, confirming the predicted second peak r-process residuals. These results suggest that tellurium is predominantly produced in the main component of the r-process, along with the rare earth elements.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Colloidal Quantum Shells: An Emerging 2D Semiconductor for Energy Applications

Low-dimensional semiconductors hold strong promise for future energy applications. These nanomaterials are inexpensive to process and offer a broad spectrum of attractive quantum-mechanical properties. The notorious problem of low-dimensional nanostructures, however, lies in their limited performance under high energetic loads, when more than one exciton per particle is created. Multiple excitons undergo fast annihilation, causing efficiently roll-off in energy-intensive applications, including high-brightness LEDs, X-ray scintillators, and solar cells. In this prospective, we will highlight an emerging type of low-dimensional semiconductors that allows avoiding such multi-exciton (MX) energy losses. Recently demonstrated colloidal quantum shells benefit from the spatial separation of multiple excitons, which leads to extraordinary improvements to MX lifetimes and MX quantum yield. This makes quantum shell morphology an attractive candidate for solution-processed optical and electrical devices. In this Focus Review, we compare the optoelectronic properties of quantum shells against other low-dimensional semiconductors and discuss their emerging opportunities in solid-state lighting and energy-harvesting applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

INTERACTION BETWEEN TWO CORONAL MASS EJECTIONS IN THE 2013 MAY 22 LARGE SOLAR ENERGETIC PARTICLE EVENT

We investigate the eruption and interaction of two coronal mass ejections (CMEs) during the large 2013 May 22 solar energetic particle event using multiple spacecraft observations. Two CMEs, having similar propagation directions, were found to erupt from two nearby active regions (ARs), AR11748 and AR11745, at ∼08:48 UT and ∼13:25 UT, respectively. The second CME was faster than the first CME. Using the graduated cylindrical shell model, we reconstructed the propagation of these two CMEs and found that the leading edge of the second CME caught up with the trailing edge of the first CME at a height of ∼6 solar radii. After about two hours, the leading edges of the two CMEs merged at a height of ∼20 solar radii. Type II solar radio bursts showed strong enhancement during this two hour period. Using the velocity dispersion method, we obtained the solar particle release (SPR) time and the path length for energetic electrons. Further assuming that energetic protons propagated along the same interplanetary magnetic field, we also obtained the SPR time for energetic protons, which were close to that of electrons. These release times agreed with the time when the second CME caught up with the trailing edge of the first CME, indicating that the CME-CME interaction (and shock-CME interaction) plays an important role in the process of particle acceleration in this event.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Iron and nickel isotope compositions of presolar silicon carbide grains from supernovae

Here we report the carbon, silicon, iron, and nickel isotope compositions of twenty-five presolar SiC grains of mostly supernova (SN) origin. The iron and nickel isotope compositions were measured with the new Chicago Instrument for Laser Ionization, CHILI, which allows the analysis of all iron and nickel isotopes without the isobaric interferences that plagued previous measurements with the NanoSIMS. Despite terrestrial iron and nickel contamination, significant isotopic anomalies in 54 Fe/ 56 Fe, 57 Fe/ 56 Fe, 60 Ni/ 58 Ni, 61 Ni/ 58 Ni, 62 Ni/ 58 Ni, and 64 Ni/ 58 Ni were detected in nine SN grains (of type X). Combined multi-isotope data of three grains with the largest nickel isotope anomalies (>100% or <-100% in at least one isotope ratio, when expressed as deviation from the solar value) are compared with the predictions of two SN models, one with and one without hydrogen ingestion in the He shell prior to SN explosion. One grain's carbon-silicon-iron-nickel isotope composition is consistent with the prediction of the model without hydrogen ingestion, whereas the other two grains' isotope anomalies could not be reproduced using either SN models. The discrepancies between the measured isotope compositions and model predictions may indicate element fractionation in the SN ejecta prior to or during grain condensation, and reiterate the need for three-dimensional SN models.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2013

THE VELOCITY ANISOTROPY OF DISTANT MILKY WAY HALO STARS FROM HUBBLE SPACE TELESCOPE PROPER MOTIONS

Based on long baseline (5-7 years) multi-epoch HST/ACS photometry, used previously to measure the proper motion of M31, we present the proper motions (PMs) of 13 main-sequence Milky Way halo stars. The sample lies at an average distance of r {approx_equal} 24 kpc from the Galactic center, with a root-mean-square spread of 6 kpc. At this distance, the median PM accuracy is 5 km s{sup -1}. We devise a maximum likelihood routine to determine the tangential velocity ellipsoid of the stellar halo. The velocity second moments in the directions of the Galactic (l, b) system are {sup 1/2}= 123{sup +29}{sub -23} km s{sup -1}, and {sup 1/2}= 83{sup +24}{sub -16} km s{sup -1}. We combine these results with the known line-of-sight second moment, {sup 1/2}= 105{+-}5 km s{sup -1}, at this (r) to study the velocity anisotropy of the halo. We find approximate isotropy between the radial and tangential velocity distributions, with anisotropy parameter {beta}= 0.0{sup +0.2}{sub -0.4}. Our results suggest that the stellar halo velocity anisotropy out to r {approx} 30 kpc is less radially biased than solar neighborhood measurements. This is opposite to what is expected from violent relaxation, and may indicate the presence of a shell-type structure at r {approx} 24 kpc. With additional multi-epoch HST data, the method presented here has the ability to measure the transverse kinematics of the halo for more stars, and to larger distances. This can yield new improved constraints on the stellar halo formation mechanism, and the mass of the Milky Way.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2012

HEAVY ION HEATING DUE TO INTERACTIONS WITH OUTWARD AND INWARD ALFVEN WAVE PACKETS

The study of simultaneous cyclotron interactions of heavy ions with outward- and inward-propagating Alfven wave packets in the solar wind was self-consistently conducted with wave-packet dynamics. It was shown that, even when the ratio of intensities of the Alfven waves propagating from the Sun and the inward propagating waves are rather large (a factor of 10 or more), the distribution function of the ions simultaneously interacting with both of the wave packets drastically differs from the distribution function formed by the interaction of ions with waves only propagating from the Sun. In the latter case, the ions acquire a shell-like distribution; in the former case, a new non-shell-type distribution with much larger effective temperatures is formed. The temporal dynamics of the ion-distribution function and the self-consistent modification of the wave-power spectral density for both the outward and inward waves were also investigated. The results refute claims by Isenberg and Hollweg that the outward-propagating waves generate the inward waves through the instability of their resonant particle shell distribution.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2018

Solar water splitting in a molecular photoelectrochemical cell

A Dye Sensitized Photoelectrosynthesis Cell (DSPEC) splits water with visible light using a derivatized, core/shell nanostructured photoanode with the core having a high surface area conductive metal oxide film--such as nanoITO (indium tin oxide) or nanoATO (antimony tin oxide)--coated with a thin outer shell of, for example, TiO 2 formed by Atomic Layer Deposition (ALD). A "chromophore-catalyst assembly" 1, [(PO 3 H 2 ) 2 bpy) 2 Ru(4-Mebpy-4-bimpy)Ru(tpy)(OH 2 )].s- up.4+, which combines both light absorber and water oxidation catalyst in a single molecule, is attached to the TiO 2 shell. Visible photolysis of the resulting core/shell/assembly structure with a Pt cathode results in water splitting into hydrogen and oxygen.

14 SOLAR ENERGY↗