Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SUPERCONDUCTING MAGNET”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Modulating Oxide‐Based Quantum Materials by Ion Implantation

Ion implantation has emerged as a powerful tool for manipulating and investigating oxide quantum materials, where strong electron correlations give rise to exotic phases and functionalities. This Review examines how controlled ion bombardment enables targeted modulation of structural, electronic, and magnetic properties in complex oxides. Recent advances in ion beam techniques is analyzed that provide unprecedented control over defect profiles, from point defects to extended damage cascades. In application, ion irradiation has demonstrated the ability to tune quantum phenomena including metal‐insulator transitions, magnetism, and superconductivity through selective doping, defect creation, and lattice strain. The ability to write quantum states with nanoscale precision using focused ion beams is opening new paths for quantum device fabrication. Challenges in understanding radiation damage mechanisms in strongly correlated systems is discussed, and identify opportunities for designing quantum functionality through defect‐engineering approaches. The technique's demonstrated capability to write quantum states with nanoscale precision, combined with its compatibility with existing semiconductor processing infrastructure, suggests a clear pathway for translating fundamental discoveries in quantum materials into practical technological applications.

defect engineering↗
DOE OSTI2024

Development of a strip-shaped X-ray mapping system for 9-cell superconducting cavities

Electrons emitted via field emission during superconducting (SC) radio-frequency (RF) cavity tests at vertical test stands often collide with the iris region inside the cavity, generating X-rays at these locations. In 1.3 GHz 9-cell SC RF cavities designed for the International Linear Collider (ILC), stiffener rings located outside the iris region between cells can interfere with X-ray detection, complicating the precise identification of field emission sites. Hence, in this study, we developed a high-density strip X-ray mapping systems (sX-map) that can be inserted into the iris region of ILC-type 9-cell SC RF cavities. This sX-map facilitates efficient and accurate detection of X-rays generated near the irises, unaffected by the presence of stiffener rings. The sX-map consisted of 32 sensors per strip, with sensors spaced approximately 10 mm apart. It was deployed in every iris of the 9-cell cavity, using a total of 320 sensors. A multiplexer was employed to facilitate the readout of a large number of detectors using a minimal number of signal lines, connecting the strips inside within the vertical test cryostat. In a vertical test conducted at Jefferson Lab (JLab), we demonstrated the capability of sX-map to detect X-rays despite the presence of a stiffener ring. This paper presents the detailed design of the sX-map and the results from the vertical test at JLab.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Fermi-surface driven frustrations in charge ordered kagome metal LuNb 6 ⁢Sn 6

The charge density wave (CDW), a translational symmetry breaking electronic liquid, plays a pivotal role in correlated quantum materials, such as high-𝑇 𝑐 superconductors and topological semimetals. Recently, CDWs that possibly intertwine with superconductivity and magnetism are observed in various kagome metals. However, the nature of CDWs and the role of the Fermi-surface (FS) topology in these materials remain an unresolved challenge. In this paper, we reveal the formation of CDWs in the newly discovered kagome metal LuNb 6 ⁢Sn 6 . Here, we observe a ‘‘yield sign’’-like hollow triangular diffuse scattering pattern and nearly complete softening of a flat optical phonon band near 𝐐 𝐻 = (1/3,1/3,1/2). The scattering intensity of the diffuse scattering displays divergent behavior as decreasing temperature until 𝑇 CDW = 70 K, where a competing CDW at 𝑄 CDW = (1/3,1/3,1/3) emerges. Combined with scanning tunneling microscopy/spectroscopy and first-principles calculations, our observations support a Fermi-surface driven frustration that suppresses the leading CDW instability at 𝐐 𝐻 . This frustration is relieved by the emergence of a subleading CDW at 𝑄 CDW . These results provide insights into the interplay between the Fermi surface, strong electron-phonon coupling, and charge density wave formation in quantum materials.

Yang, F. Z. [Oak Ridge National Laboratory (ORNL),↗
DOE OSTI2024

Collimator challenges at SuperKEKB and their countermeasures using nonlinear collimator

In SuperKEKB, movable collimators reduce the beam background noise in the Belle II particle detector and protect crucial machine components, such as final focusing superconducting quadrupole magnets (QCS), from abnormal beam losses. The challenges related to the collimator, which were not properly considered at the time of SuperKEKB design, have surfaced through experience with its operation. In this paper, we report the collimator operation strategy in SuperKEKB. In addition, a significant challenge of beam collimation due to the future increase in the beam background is highlighted. We also discuss another issue caused by unexpected and sudden beam losses in the machine that damage collimators, leading to weaker beam collimation performance and an increase in transverse impedance. Furthermore, we introduce a novel collimation approach called the nonlinear collimator (NLC) to address these challenges. We detail the concept of NLC and evaluate their effectiveness by assessing the collimator impedance, beam background reduction, and impact on the dynamic aperture. The possibility of using NLCs as absorber collimators to counteract events that damage the collimator is also shown to be helpful.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Realignment and suppression of charge density waves in the rare-earth tritellurides 𝑅⁢Te 3 (𝑅 = La, Gd, Er)

The rare-earth tritellurides have a rich phase diagram that includes charge density waves (CDWs), superconductivity, and magnetic order, offering a platform to study the interplay between these phases on a square-net system. Prior studies have shown that defects can affect the CDW characteristics in these materials, yet coupling between the CDW order and the underlying microstructure has not been studied at the nanoscale. Here we use scanning transmission electron microscopy at cryogenic temperatures to directly visualize the effects of defects on the CDW order and provide a spatially resolved microscopic correlation between the CDW transition and structural defects. Here, we show that in the presence of extended defects, such as dislocations and stacking faults, the weak orthorhombicity of the rare-earth tritellurides is lost and the material becomes pseudotetragonal. Since the orthorhombicity acts as a symmetry breaking field for the CDW transitions in rare-earth tritellurides, the presence of these extended defects modulates the energetics of the CDWs and suppresses the ground-state CDW phase at low temperature.

Charge density waves↗
DOE OSTI2025

Atomic-Scale Tracking of Topological Defect Motion and Incommensurate Charge Order Melting

Charge order pervades the phase diagrams of quantum materials where it competes with superconducting and magnetic phases, hosts electronic phase transitions and topological defects, and couples to the lattice generating intricate structural distortions. Incommensurate charge order is readily stabilized in manganese oxides, where it is associated with anomalous electronic and magnetic properties, but its nanoscale structural inhomogeneity complicates precise characterization and understanding of its relationship with competing phases. Leveraging atomic-resolution variable-temperature cryogenic scanning transmission electron microscopy, we characterize the thermal evolution of charge order as it transforms from its ground state in a model manganite system. We find that mobile networks of discommensurations and dislocations generate phase inhomogeneity and induce global incommensurability in an otherwise lattice-locked modulation. Driving the order to melt at high temperatures, the discommensuration density grows, and regions of order locally decouple from the lattice periodicity. Published by the American Physical Society 2025

Schnitzer, Noah (ORCID:0000000210421146)↗
DOE OSTI2024

Final Technical Report

TOPOLOGY-DRIVEN QUANTUM AND THERMAL DYNAMICS OF LOW-DIMENSIONAL MAGNETIC AND SUPERCONDUCTING SYSTEMS

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Machine Protection Studies of Fast Instability-Driven Beam Losses in the EIC Electron Storage Ring

Fast transverse beam instabilities represent one of the most challenging protection scenarios for the Electron-Ion Collider (EIC) electron storage ring (ESR). Coherent betatron oscillations driven by collective effects can grow rapidly and lead to substantial beam losses within only a few tens of turns, posing a threat to collimators, superconducting (SC) magnets, cryogenic systems, and detector components. A dedicated simulation framework based on distributed transverse excitations was developed to evaluate instability-driven beam losses in the ESR. A conservative instability rise time on the order of 10 turns was used to define a bounding protection scenario. Simulations show that the original two-collimator configuration is insufficient to localize losses under all operating conditions, whereas an optimized four-collimator configuration reduces loss leakage into protected regions by more than two orders of magnitude. Nevertheless, the most severe instability scenarios produce catastrophic beam impacts, with nearly half of the stored beam being intercepted by the collimators within a single turn, exceeding the preliminary estimated survivability limits of the baseline collimator design. The results demonstrate that collimation alone is insufficient to guarantee safe ESR operation and must be complemented by a fast machine-protection system. Dedicated turn-by-turn beam-position monitors and fast beam-loss monitors provide sufficient advance warning to detect instability growth and initiate a beam abort before equipment-damaging loss levels are reached. These findings establish quantitative requirements for the ESR machine-protection architecture and support the implementation of a multilayer protection strategy for both accelerator and detector systems.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

High-field superconducting halo in UTe 2

The heavy fermion material UTe 2 is a candidate topological superconductor that exhibits multiple magnetic field–induced superconducting phases. One such phase exists only at fields greater than 40 tesla, a considerable scale given its critical temperature of only 2 K. Here, in this work, we extend measurements of this state with fields outside of the bc crystallographic plane and reveal its core structure: The superconducting phase wraps around the b axis in a halo-like fashion and appears to be stabilized by a field component perpendicular to the magnetic easy axis. This angle dependence points to a multicomponent spin-triplet order parameter with a finite angular momentum of the Cooper pairs. The pairing mechanism remains enigmatic, and UTe 2 ’s specific magnetophilic superconducting tendencies seem incompatible with existing models for field-enhanced superconductivity.

Lewin, Sylvia K. [National Inst. of Standards and ↗
DOE OSTI2024

Superconducting (Ba,K)Fe 2 As 2 epitaxial films on single and bicrystal SrTiO 3 substrates

The realization of single crystal and bicrystal films of superconducting materials is of great interest because they allow the investigation of the intragrain performance as well as the understanding of potential limitations in the grain boundary transparency. For many years, the realization of a high-quality (Ba,K)Fe 2 As 2 film has been challenging. Here, the realization of (Ba,K)Fe 2 As 2 epitaxial thin films on single crystal SrTiO 3 (001) and [001]-tilt-type SrTiO 3 bicrystal substrates with high superconducting properties is demonstrated. The epitaxial growth of (Ba,K)Fe 2 As 2 was enabled by implementing an undoped BaFe 2 As 2 buffer layer between the SrTiO 3 substrate and (Ba,K)Fe 2 As 2 film. The film exhibits a high T c of 38.0 K and an extremely high J c of 14.3 MA/cm 2 at 4.2 K. Artificial grain boundaries of (Ba,K)Fe 2 As 2 were also successfully achieved on bicrystals with misorientation angles up to 36.8° by the same preparation methods. The artificial grain boundaries exhibited an identical T c of 38.0 K and an excellent transfer of the grain orientation from the bicrystal substrates with high crystallinity comparable to that of the high-quality Ba(Fe,Co) 2 As 2 films. Furthermore, this enables the investigation of the intrinsic (Ba,K)Fe 2 As 2 grain boundary nature, which will clarify its potential for superconducting applications, like Josephson junctions, wires, and magnets.

(Ba,K)Fe2As2↗
DOE OSTI2025

Higher Dimensionality in the Mg–Co–B System: Synthesis and Structure of Incommensurate Composite Mg 1+ε Co 4 B 4

Guided by high-temperature in situ X-ray diffraction, the discovery and synthesis of Mg 1+ε Co 4 B 4 (ε ≈ 0.272) using a MgH 2 hydride precursor is reported, along with a detailed crystal structure description and measurement of magnetic properties. The mismatch in lattice periodicities between Mg and Co–B substructures places Mg 1+ε Co 4 B 4 in the family of incommensurate composite crystals and prompted structural refinement in a (3 + 1)-dimensional model. The structure of Mg 1+ε Co 4 B 4 (P4 2 /ncm(00γ)s00s, a = 6.75847(7) Å, c = 3.94007(8) Å, q = (0, 0, 1.2721(3))) was refined from neutron powder diffraction and high-resolution powder X-ray diffraction data and confirmed by scanning transmission electron microscopy and electron diffraction. Mg 1+ε Co 4 B 4 is isostructural to Nd 1+ε Fe 4 B 4 and several related ternary borides with 0.07 ≤ ε ≤ 0.17, with Mg occupying the rare-earth site. Satellite reflections in the electron diffraction patterns hinted at positional modulation of the transition metal–boron substructure by Mg atoms, but this could not be refined from the neutron or X-ray diffraction data. Low-temperature magnetic measurements show no indications of long-range magnetic ordering or superconductivity down to 5 K. DFT calculations confirmed the absence of a magnetically ordered ground state and the stability of a 5:4 supercell (ε = 0.25) relative to the fully commensurate structure. Neutron diffraction and synthesis from elemental Mg demonstrated that Mg 1+ε Co 4 B 4 is not a hydrogen-stabilized phase. Mg 1+ε Co 4 B 4 represents the second compound reported in the Mg–Co–B system and the first superspace symmetry model of a Nd 1+ε Fe 4 B 4 -type incommensurate composite compound refined from powder diffraction data.

chemical structure↗
DOE OSTI2024

Quasi-Two-Dimensional Antiferromagnetic Spin Fluctuations in the Spin-Triplet Superconductor Candidate CeRh 2 As 2

The tetragonal heavy-fermion superconductor CeRh 2 ⁢As 2 (T c = 0.3 K) exhibits an exceptionally high critical field of 14 T for B ∥ c. It undergoes a field-driven first-order phase transition between superconducting states, potentially transitioning from spin-singlet to spin-triplet superconductivity. To further understand these superconducting states and the role of magnetism, we probe spin fluctuations in CeRh 2 ⁢As 2 using neutron scattering. Here, we find dynamic (π, π) antiferromagnetic (AFM) spin correlations with an anisotropic quasi-two-dimensional correlation volume. Our data place an upper limit of 0.31 μ B on the staggered magnetization of corresponding Néel orders at T = 0.08 K. Density functional theory calculations, treating Ce 4⁢ƒ electrons as core states, show that the AFM wave vector connects significant areas of the Fermi surface. Our findings indicate that the dominant excitations in CeRh 2 ⁢As 2 for ℏω⁢ < 1.2 meV are magnetic and suggest that superconductivity in CeRh 2⁢ As 2 is mediated by AFM spin fluctuations associated with a proximate quantum critical point.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

The Noncollinear Path to Two-Dimensional Topological Superconductivity

Two-dimensional magnet-superconductor hybrids (2D-MSH) are promising candidates to realize devices for topology-based quantum technologies and superconducting spintronics. So far, studies have focused on 2D-MSH systems with collinear ferro- or antiferromagnetic layers. Here, we present the discovery of topological superconductivity in a noncollinear MSH system where a magnetic spiral is realized in an Fe monolayer proximity coupled to a superconducting Ta(110) substrate. By combining low-temperature spin-polarized scanning tunneling spectroscopy with an in-depth theoretical study, we can conclude that the system is in a topological nodal-point superconducting phase with low-energy edge modes. Furthermore, we reveal that for this noncollinear spin texture, these edge modes exhibit a magnetization direction-dependent dispersion. This means that a spatial shift of the magnetic spiral could be used to reverse the chirality of an edge mode in future MSH-based devices.

chiral edge modes↗
DOE OSTI2025

Final Report: Performance-structure characterization to improve REBCO Fusion conductor production at SuperPower

Several companies have used ReBCO tapes to make magnets operating at 20 K, at magnetic fields up to 20T suitable for plasma confining for controlled fusion applications. The transport properties of ReBCO conductors should be optimized for such conditions. NHMFL is one of the few laboratories where such tests can be accomplished. Recently, SuperPower Inc. came up with a new product, REBCO MOCVD HM tape, optimized for plasma confining applications. These HM tapes are designed to have increased critical currents at intermediate temperatures of 4.2K

36 MATERIALS SCIENCE↗
DOE OSTI2025

Elastocaloric evidence for a multicomponent superconductor stabilized within the nematic state in Ba(Fe 1− x Co x ) 2 As 2

The iron-based high-$T_c$ superconductors (SCs) exhibit rich phase diagrams with intertwined phases, including magnetism, nematicity, and superconductivity. The superconducting $T_c$ in many of these materials is maximized in the regime of strong nematic fluctuations, making the role of nematicity in influencing the superconductivity a topic of intense research. Here, in this study, we use the AC elastocaloric effect (ECE) to map out the phase diagram of Ba(Fe 1− x Co x ) 2 As 2 near optimal doping. The ECE signature at $T_c$ on the overdoped side, where superconductivity condenses without any nematic order, is quantitatively consistent with other thermodynamic probes that indicate a single-component superconducting state. In contrast, on the slightly underdoped side, where superconductivity condenses within the nematic phase, ECE reveals a second thermodynamic transition proximate to and below $T_c$. We rule out magnetism and reentrant tetragonality as the origin of this transition and find that our observations strongly suggest a phase transition into a multicomponent superconducting state. This implies the existence of a subdominant pairing instability that competes strongly with the dominant $s^±$ instability. Our results highlight the significant role of nematic order in determining the pairing symmetry close to optimal doping in this extensively studied iron-based SC, while also demonstrating the power of ECE in uncovering strain-tuned phase diagrams of quantum materials.

Ghosh, Sayak [Stanford University, CA (United Stat↗