Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STANDING WAVES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Evidence of Standing Waves in Arc Jet Nozzle Flow

Waves spawned by the nozzle in the NASA Ames 60 MW Interaction Heating Facility arc jet were experimentally observed in pressure surveys at the exit of the nozzle. The waves have been seen in past CFD simulations, but were away from the region where models were tested (for the existing nozzles). However, a recent test series with a new nozzle extension (229 mm exit diameter) revealed that these waves intersect the centerline of the jet in a region where it is desirable to put test articles, and that the waves may be contributing to non-uniform recession behavior seen in Teflon (trademark) sublimation test articles tested in this new nozzle. It is reasonable to assume the ablation recession of thermal protection models will also be nonuniform due to exposure to these waves. This work shows that ablation response is sensitive to the location of test samples in the free jet relative to the location of the wave interaction, and that the issues with these waves can be avoided by choosing an optimum position for a test article in the free jet. This work describes the experimental observations along with the CFD simulations that have identified the waves emanating from the nozzle, as well as the instrumentation used to detect them. The work describes a recommended solution, derived by CFD analysis, which if implemented, should significantly reduce these flow disturbance and pressure anomalies in future nozzles.

Waves↗
DOE OSTI2015

Nonlinear Trivelpiece-Gould waves: Frequency, functional form, and stability

Here, this paper considers the frequency, spatial form, and stability of nonlinear Trivelpiece-Gould (TG) waves on a cylindrical plasma column of length L and radius r p , treating both traveling waves and standing waves, and focussing on the regime of experimental interest in which L/r p >> 1. In this regime, TG waves are weakly dispersive, allowing strong mode-coupling between Fourier harmonics. The mode coupling implies that linear theory for such waves is a poor approximation even at fairly small amplitude, and nonlinear theories that include a small number of harmonics, such as three-wave parametric resonance theory, also fail to fully capture the stability properties of the system. It is found that nonlinear standing waves suffer jumps in their functional form as their amplitude is varied continuously. The jumps are caused by nonlinear resonances between the standing wave and nearly linear waves whose frequencies and wave numbers are harmonics of the standing wave. Also, the standing waves are found to be unstable to a multi-wave version of three-wave parametric resonance, with an amplitude required for instability onset that is much larger than expected from three wave theory. It is found that traveling waves are linearly stable for all amplitudes that could be studied, in contradiction to three-wave theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1991

Square patterns and secondary instabilities in driven capillary waves

Amplitude equations (including nonlinear damping terms) are derived which describe the evolution of patterns in large-aspect-ratio driven capillary wave experiments. For drive strength just above threshold, a reduction of the number of marginal modes (from traveling capillary waves to standing waves) leads to simpler amplitude equations, which have a Lyapunov functional. This functional determines the wavenumber and symmetry (square) of the most stable uniform state. The original amplitude equations, however, have a secondary instability to transverse amplitude modulation (TAM), which is not present in the standing-wave equations. The TAM instability announces the restoration of the full set of marginal modes.

Milner, S. T.↗
NASA NTRS1982

Standing hydromagnetic waves observed by ISEE 1 and 2 - Radial extent and harmonic

Direct measurements of the spatial extent of the resonant hydromagnetic waves associated with Pc 4 and 5 magnetic pulsations made by the closely spaced ISEE 1 and 2 satellites are presented together with ISEE 1 determinations of the harmonic of the resonant waves. The use of two satellites in similar orbits, which makes it possible to distinguish between spatial and temporal features, has shown the resonant region widths to extend over about 0.2 to 1.6 L shells for three events detected on the dayside between L = 4 and L = 7. The two events for which plasma density data was available occurred at plasma density gradients in the vicinity of the plasmapause. The standing wave harmonic was determined by the combination of two techniques: the comparison of the observed wave period with that predicted by standing wave theory, and the comparison of the phases of the observed wave electric and magnetic field. The two events analyzed are found to be second harmonic oscillations, suggesting internal generation in the magnetosphere by a bounce resonant mechanism.

Singer, H. J.↗
DOE OSTI2015

Interferometric properties of standing spin waves and the application to a phase comparator

We numerically studied the material and structural parameter dependence of interferometric properties of the standing spin wave resonance (SSWR) by micromagnetic simulations and demonstrate the feasibility of practical application to an integrated phase comparator. The micromagnetic configuration of the synthesized SSWR emitted from the two microwave currents flowing through the parallel strip lines depends on the phase difference Δϕ between them. Resultantly, the Δϕ is converted to the related output voltage with an overlaid phase detector, inductively coupled to the magnetic strip. Among the investigated various material systems, low damping (α ∼ 0.001) metallic ferromagnets are found to exhibit superior device performance due to the reduced viscous dissipation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

First Imaging Observation of Standing Slow Wave in Coronal Fan Loops

We observe intensity oscillations along coronal fan loops associated with the active region AR 11428. The intensity oscillations were triggered by blast waves that were generated due to X-class flares in the distant active region AR 11429. To characterize the nature of oscillations, we created time–distance maps along the fan loops and noted that the intensity oscillations at two ends of the loops were out of phase. As we move along the fan loop, the amplitude of the oscillations first decreased and then increased. The out-of-phase nature together with the amplitude variation along the loop implies that these oscillations are very likely to be standing waves. The period of the oscillations is estimated to be ∼27 minutes, damping time to be ∼45 minutes, and phase velocity projected in the plane of sky to be ∼65–83 km s{sup −1}. The projected phase speeds were in the range of the acoustic speed of coronal plasma at about 0.6 MK, which further indicates that these are slow waves. To the best of our knowledge, this is the first report on the existence of the standing slow waves in non-flaring fan loops.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

Automated laser-based barely visible impact damage detection in honeycomb sandwich composite structures

Nondestructive evaluation (NDE) for detection and quantification of damage in composite materials is fundamental in the assessment of the overall structural integrity of modern aerospace systems. Conventional NDE systems have been extensively used to detect the location and size of damages by propagating ultrasonic waves normal to the surface. However they usually require physical contact with the structure and are time consuming and labor intensive. An automated, contactless laser ultrasonic imaging system for barely visible impact damage (BVID) detection in advanced composite structures has been developed to overcome these limitations. Lamb waves are generated by a Q-switched Nd:YAG laser, raster scanned by a set of galvano-mirrors over the damaged area. The out-of-plane vibrations are measured through a laser Doppler Vibrometer (LDV) that is stationary at a point on the corner of the grid. The ultrasonic wave field of the scanned area is reconstructed in polar coordinates and analyzed for high resolution characterization of impact damage in the composite honeycomb panel. Two methodologies are used for ultrasonic wave-field analysis: scattered wave field analysis (SWA) and standing wave energy analysis (SWEA) in the frequency domain. The SWA is employed for processing the wave field and estimate spatially dependent wavenumber values, related to discontinuities in the structural domain. The SWEA algorithm extracts standing waves trapped within damaged areas and, by studying the spectrum of the standing wave field, returns high fidelity damage imaging. While the SWA can be used to locate the impact damage in the honeycomb panel, the SWEA produces damage images in good agreement with X-ray computed tomographic (X-ray CT) scans. The results obtained prove that the laser-based nondestructive system is an effective alternative to overcome limitations of conventional NDI technologies.

36 MATERIALS SCIENCE↗
NASA NTRS1980

On the pressure field of nonlinear standing water waves

The pressure field produced by two dimensional nonlinear time and space periodic standing waves was calculated as a series expansion in the wave height. The high order series was summed by the use of Pade approximants. Calculations included the pressure variation at great depth, which was considered to be a likely cause of microseismic activity, and the pressure distribution on a vertical barrier or breakwater.

Schwartz, L. W.↗