Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SLABS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

On the compensation of geoid anomalies due to subducting slabs

Candidate models of the forces which oppose the sinking of slabs are all constrained to produce results consistent with the following observation: relative geoid highs, which one assumes are due to slabs, characteristically occur over subduction zones. Certain models which are otherwise plausible, such as those based on a Newtonian half-space mantle, yield geoid lows instead of highs. This study has extended a published model of viscous corner flow in subduction zones in order to demonstrate that it can, in certain cases, produce the requisite geoid highs. Specifically the relative geoid highs are produced if mantle flow is distinctly non-Newtonian (stress exponent n 2). Results in the form of deflection on vertical (or geoid slope) profiles are computed for typical values of the slab parameters; they are compared with a representative profile of geoid slopes derived from Seasat altimeter data in order to show qualitative similarities. It is concluded that the effect of non-Newtonian flow as opposed to Newtonian, is to spread out the induced surface deformation, thereby stretching out the regional compensation to wavelengths, (transverse to the trench) of several thousand kilometers.

Mcadoo, D. C.↗

The distribution of earthquakes with depth and stress in subducting slabs

The global variation of Benioff zone seismicity with depth and the orientation of stress axes of deep and intermediate earthquakes is explained using numerical models of subducting slabs. Models that match the seismicity and stress require a barrier to flow at the 670 km seismic discontinuity. The barrier may be a viscosity increase of at least an order of magnitude or a chemical discontinuity. Instantaneous flow is subparallel to the slabs for models with a viscosity increase but contorted for models with a chemical barrier. Log N (number of earthquakes) decreases linearly to 250-300 km depth and increases thereafter. Stress magnitude in the models shows the same pattern, in accord with experiments showing N proportional to e(k-sigma), with k a constant and sigma the stress magnitude. The models predict downdip compression in the slabs at depths below 300-400 km, as observed for earthquake stress axes.

Vassiliou, M. S.↗

62-dB-gain multiple-pass slab geometry Nd:YAG amplifier

A flash-lamp-pumped slab Nd:YAG laser amplifier with 62 dB of gain is demonstrated. The amplifier remains linear for energy extraction up to 12 mJ, and the beam spatial quality remains good at repetition rates up to 10 Hz. The slab geometry provides for gain averaging in the zigzag dimension, thus eliminating the undesirable effects of nonuniform pumping. This averaging and the necessity for only a single compact gain element are valuable attributes that may allow for eventual laser-diode array pumping of the slab Nd:YAG amplifier.

Kane, T. J.↗

Thermally induced phase changes, lateral heterogeneity of the mantle, continental roots, and deep slab anomalies

Factors which influence the lateral heterogeneity in density and seismic velocity with depth in the upper earth mantle are discussed. It is emphasized that most of the increases in density and seismic velocity with depth are caused by pressure-induced solid-solid phase changes in the high-density high-velocity phases of mineral assemblage, due to variations in temperature. In particular, the ilmenite form of MgSiO3 and the gamma-spinel form of Mg2SiO4 have broad stability fields in cold mantle and are not stable in hotter mantle. It is emphasized that the density and velocity anomalies associated with temperature-induced phase changes in mineral assemblage must be taken into account in the thermal models of the slabs; when these effects are accounted for, the geoid and seismic anomalies associated with subducted slabs are consistent with slab confinement to the upper mantle and with layered models of mantle convection.

Anderson, Don L.↗

Diffraction by a multilayer slab recessed in a ground plane via generalized impedance boundary conditions

The diffraction problem associated with a multilayer material slab recessed in a perfectly conducting ground plane is formulated and solved via the generalized scattering matrix formulation in conjunction with the dual integral equation approach. The multilayer slab is replaced by a surface obeying a generalized impedance boundary condition to facilitate the computation of the pertinent Wiener Hopf split functions and their zeros. Both Ez and Hz polarizations are considered, and a number of scattering patterns are presented, some of which are compared to exact results available for a homogeneous recessed slab.

Ricoy, M. A.↗

Deformation of a weak subducted slab and variation of seismicity with depth

Numerical simulations of slab evolution are used here to show that a weak slab model is consistent with seismic observations. Assuming that earthquakes occur at a rate proportional to deformation rate, the observed variation with depth of seismicity rate and focal mechanisms is reproduced along with the cessation of seismicity at 670 km depth. Provided that sinking material encounters resistance at depth, the pattern of seismicity can be explained by any mechanism for deep earthquakes in which the rate of seismicity is proportional to strain rate in the slab.

Tao, Winston C.↗

Surface waves on a grounded dielectric slab covered by a resistive sheet

This paper examines surface wave propagation in a grounded dielectric slab covered with a resistive sheet. Transcendental equations are derived for each polarization and are solved using iterative techniques. Attention and phase velocity are shown for a representative geometry. The results are applicable to both a grounded slab covered with a resistive sheet and an ungrounded slab covered on each side with a resistive sheet.

Shively, David↗

Dynamical consequences on fast subducting slabs from a self-regulating mechanism due to viscous heating in variable viscosity convection

We have studied 2-D time-dependent convection for a rheology which is both non-Newtonian and temperature-dependent. Strong effects associated with viscous heating are found in the downwelling sheets, which are heated on both sides with an intensity around O(100) times the chondritic value. The magnitude of viscous heating increases strongly with the subduction speed. The slab interior is weakened by viscous heating and slab breakoff then takes place. This process provides a self-regulating mechanism for governing the speed of intact slabs able to reach the deep mantle. Timescales associated with viscous heating are quite short, a few million years. Internal heating by radioactivity decreases the amount of shear heating.

Larsen, Tine B.↗

Convection in Slab and Spheroidal Geometries

Three-dimensional numerical simulations of compressible turbulent thermally driven convection, in both slab and spheroidal geometries, are reviewed and analyzed in terms of velocity spectra and mixing-length theory. The same ideal gas model is used in both geometries, and resulting flows are compared. The piecewise-parabolic method (PPM), with either thermal conductivity or photospheric boundary conditions, is used to solve the fluid equations of motion. Fluid motions in both geometries exhibit a Kolmogorov-like k(sup -5/3) range in their velocity spectra. The longest wavelength modes are energetically dominant in both geometries, typically leading to one convection cell dominating the flow. In spheroidal geometry, a dipolar flow dominates the largest scale convective motions. Downflows are intensely turbulent and up drafts are relatively laminar in both geometries. In slab geometry, correlations between temperature and velocity fluctuations, which lead to the enthalpy flux, are fairly independent of depth. In spheroidal geometry this same correlation increases linearly with radius over the inner 70 percent by radius, in which the local pressure scale heights are a sizable fraction of the radius. The effects from the impenetrable boundary conditions in the slab geometry models are confused with the effects from non-local convection. In spheroidal geometry nonlocal effects, due to coherent plumes, are seen as far as several pressure scale heights from the lower boundary and are clearly distinguishable from boundary effects.

Porter, David H.↗

New Whole-House Solutions Case Study: Exterior Rigid Foam Insulation at the Edge of a Slab Foundation, Fresno, California

Exterior rigid foam insulation at the edge of the slab foundation was a unique feature for this low-load, unoccupied test house in a hot-dry climate and may be more appropriate for climates with higher heating loads. U.S. Department of Energy Building America research team IBACOS worked with National Housing Quality Award winner Wathen-Castanos Hybrid Homes, Inc., to assess the performance of this feature in a single-family detached ranch house with three bedrooms and two full bathrooms constructed on a slab-on-grade foundation in Fresno, California. One challenge during installation of the system was the attachment of the butyl flashing to the open framing. To solve this constructability issue, the team added a nailer to the base of the wall to properly attach and lap the flashing. In this strategy, R-7.5, 1.5-in.-thick extruded polystyrene was installed on the exterior of the slab for a modeled savings of 4,500 Btu/h on the heating load.

Building America↗

Casimir force in presence of multi layer magnetodielectric slabs

Research Highlights: > The Casimir force has been obtained in the presence of some dielectrics. > The approach is based on a Lagrangian. > It can be generalized to include the rough surfaces. > Finite temperature correction can be easily obtained. - Abstract: By using the path-integral formalism, electromagnetic field in the presence of some linear, isotropic magnetodielectric slabs is quantized and related correlation functions are found. In the framework of path-integral techniques, Casimir force between two infinitely large, parallel and ideal conductors, with a different number of magnetodielectric slabs in between, is obtained by calculating the Green's function corresponding to each geometry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spectral singularities, threshold gain, and output intensity for a slab laser with mirrors

We explore the consequences of the emergence of linear and nonlinear spectral singularities in TE modes of a homogeneous slab of active optical material that is placed between two mirrors. We use the results together with two basic postulates regarding the behavior of laser light emission to derive explicit expressions for the laser threshold condition and output intensity for these modes of the slab and discuss their physical implications. In particular, we reveal the details of the dependence of the threshold gain and output intensity on the position and properties of the mirrors and on the real part of the refractive index of the gain material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Monitoring steel fibre orientation in self-compacting cementitious composite slabs during pouring with dynamic X-ray radiography

This paper presents a new technique based on dynamic X-ray radiography that can be used to assess fibre orientation during pouring of steel fibre reinforced cementitious composites. Synthetic examples were used to assess the suitability and robustness of the technique, which was shown to provide reliable measurements of fibre orientation even when the signal-to-noise ratio is relatively high. A study was then carried out on the effect of formwork aspect ratio, time/duration of pouring, and rebar placement on the fibre orientation while pouring self-compacting cementitious composite slabs. Results demonstrated the ability of the technique in monitoring the movements of fibres while pouring, and the strong effect of the flow in inducing preferential fibre alignment within the slabs. Fibre orientation was found to vary progressively over time and could take about half of the duration of pouring to fully stabilise.

36 MATERIALS SCIENCE↗

Influence of O 2 / N 2 oxidizer blends on soot formation and radiative heat flux in PMMA-air 2D slab burner for understanding hybrid rocket combustion

The focus of this study is to establish a correlation between the flame to fuel incident radiative heat flux (RHF) in 1D steady-state diffusion flames to non-intrusively measured RHF in 2D slab burner experiments for a range of O 2 /N 2 oxidizer blends. Slab burner experiments are conducted for a range of increasing O 2 concentrations from 17% to 100% in the oxidizer stream. Non-intrusive two-color pyrometry is used to determine flame temperature, soot volume fraction, and flame to fuel surface RHF. Measurements and modeling confirm soot volume fraction attains a local maximum for an O 2 concentration of 45%. Low-strain diffusion flame modeling shows the reason for the local maximum is the relative location of the soot formation/nucleation fronts relative to oxidation which decreases with increasing O 2 concentration. Overall good agreement between modeling and measurements of radiative heat flux to the fuel is observed for the fuel and range of O 2 concentrations considered. Furthermore, these results demonstrate the viability of using flamelet modeling approaches for describing hybrid rocket motors.

2D slab burner↗

Microwave and THz sensing using slab-pair-based metamaterials

Here in this work the sensing capability of an artificial magnetic metamaterial based on pairs of metal slabs is demonstrated, both theoretically and experimentally, in the microwave regime. The demonstration is based on transmission measurements and simulations monitoring the shift of the magnetic resonance frequency as one changes a thin dielectric layer placed between the slabs of the pairs. Strong dependence of the magnetic resonance frequency on both the permittivity and the thickness of the dielectric layer under detection was observed. The sensitivity to the dielectrics' permittivity (ε) is larger for dielectrics of low ε values, which makes the approach suitable for sensing organic materials also in the THz regime. Finally, the capability of our approach for THz sensing is also demonstrated through simulations.

36 MATERIALS SCIENCE↗

Experimental study of slab solar collection on the hydronic system of road

This paper studied the slab solar collection (SSC) process, which is one of the essential compositions of road hydronic ice-snow melting (HISM) system that stores solar energy in summer to melt ice and snow on the road in winter. Its aim is to find out the heat transfer characteristic of the SSC and heat collecting efficiency and the influence of pipe spacing and flow rate by experiment. As shown in experimental results, the average heat collecting capacity is about 150-250 W/m{sup 2} in natural summer condition, while the solar radiation intensity is about 300-1000 W/m{sup 2}. It is shown that the increment of fluid flow results in the increment of heat collection efficiency, while the increment of pipe spacing results in the decrement of the efficiency in experiment modes. The results show that the road slab can obtain about 30% solar heat in summertime, and the solar collection can lower the pavement temperature and reduce the insolation weathering. (author)

14 SOLAR ENERGY↗

Thermal stress-induced depolarization compensation in wide-bandwidth, high-energy, high-repetition-rate multi-slab laser amplifiers

We present an innovative design for a two-head, gas-cooled multi-slab high-energy, high-repetition-rate amplifier aimed at mitigating thermally induced depolarization in a wide-bandwidth neodymium-doped glass gain medium. This architecture employs two quartz rotators (QRs) with opposite-handedness, strategically positioned within each multi-slab amplifier head, to enhance depolarization compensation. Theoretical modeling of this amplifier configuration demonstrates a 20× reduction in depolarization losses for a 70 mm beam operating at the central wavelength, compared to conventional approaches that utilize a single QR positioned between the amplifier heads. In addition, for a wide bandwidth source, the integration of QRs with opposite-handedness yields a 9× improvement in depolarization losses at the spectral extremes compared to the use of two QRs exhibiting the same optical handedness in both amplifier heads.

47 OTHER INSTRUMENTATION↗

Surface Relaxation and Electronic States of Pt(111) Surface with Varying Slab Thickness

Surface relaxation and electronic DOS's of Pt(111) surface have been studied with varying slab thickness using ab-initio SIESTA method. We found the expansion in the top layer and contraction in the subsurface layers of Pt(111) surface. Our results match with the experimental results. Also observing electronic density of states we found that as we increase the thickness of slab, the PDOS of Pt(111) surface goes towards the bulk density of states and Fermi energy shifts towards the bulk fermi energy.

36 MATERIALS SCIENCE↗