Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SIRTF”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Alternative aperture stop position designs for SIRTF

Three designs of the Space Infrared Telescope Facility (SIRTF) for a 100,000 high earth orbit are considered with particular attention given to the evaluation of the aperture stop position. The choice of aperture stop position will be based on stray light considerations which are being studied concurrently. It is noted that there are advantages in cost, mass, and astronomical aperture to placing the aperture stop at or near the primary mirror, if the stray light circumstances allow.

Davis, Paul K.↗
NASA NTRS1990

Technology development program for the Space Infrared Telescope Facility (SIRTF) science instruments

A coordinated technology program for the Space Infrared Telescope Facility (SIRTF) is described. The program encompasses detector technology, cryogenic mechanisms technology, and an adiabatic demagnetization refrigerator. Discrete detectors, detector arrays, detector readouts, and testing of engineering models under simulated flight environment conditions are considered. Several focal planes will be optimized at a particular wavelength range to make up over 247,000 detector pixels from about 1.8 to 1000 microns.

Ramos, Ruben↗
NASA NTRS1990

Design of a compliant passive magnetic bearing for use in SIRTF's Tertiary Mirror Assembly

A proposed baseline design for the Space Infrared Telescope Facility includes a Tertiary Mirror Assembly (TMA) which selectively redirects the telescope's converging science beam to each of several instruments. The TMA's mirror rotates on an axis coincident with the beam's axis, and is held steady during observation by a kinematic mount. A bearing has been designed whose compliance causes minimal interference with the precision of the kinematic mount, and which is well suited to the particular requirements of a cryogenic satellite such as SIRTF. The bearing suspends its rotor by taking advantage of the repulsion between a superconductor and a magnet. It potentially eliminates problems associated with mechanical bearings that arise in similar applications, such as lubricant loss or failure, bearing wear, and sensitivity to particulates, and does so without imposing the thermal load of a bearing heater or active magnetic bearing. The bearing shows promise of offering an alternative to ball bearings in cryogenic applications where some compliance is acceptable or advantageous.

Cannon, David M.↗
NASA NTRS1993

SIRTF thermal design modifications to increase lifetime

An effort was made to increase the predicted lifetime of the SIRTF dewar by lowering the exterior shell temperature, increasing the radiated energy from the vapor cooled shields and reconfiguring the vapor cooled shields. The lifetime increases can be used to increase the scientific return from the mission and as a trade-off against mass and cost. This paper describes the configurations studied, the steady state thermal model used, the analytical methods and the results of the analysis. Much of the heat input to the outside dewar shell is radiative heat transfer from the solar panel. To lower the shell temperature, radiative cooled shields were placed between the solar panel and the dewar shell and between the bus and the dewar shell. Analysis showed that placing a radiator on the outer vapor cooled shield had a significant effect on lifetime. Lengthening the distance between the outer shell and the point where the vapor cooled shields are attached to the support straps also improved lifetime.

Petrick, S. W.↗
NASA NTRS1991

Mission design for the Space Infrared Telescope Facility (SIRTF)

The Space Infrared Telescope Facility (SIRTF) is the fourth in NASA's series of Great Observatories. It will feature a one-meter class cryogenically cooled telescope. It is planned for a NASA fiscal start for the development phase in 1994 with a launch in about 2001. The launch vehicle will be the new upgraded Titan IV with a Centaur upper stage. The operational orbit will be circular at an altitude of about 100,000 km. The planned mission lifetime is 5 years. This paper addresses the rationale in the selection of the high altitude orbit, the performance of the launch vehicle in delivering the observatory to orbit, other orbit options, and the planned observational modes and capabilities of the observatory. The paper will also address the viewing geometry and viewing constraints affecting science observation, telescope aperture shade design, and spacecraft solar-panel and communication design.

Kwok, Johnny H.↗
NASA NTRS1991

Ground systems and operations concepts for the Space Infrared Telescope Facility (SIRTF)

Key requirements and ground systems implementation strategy for SIRTF which presents a significant challenge in the operational phase of the mission are discussed. The facility is aimed at reliably integrating a guaranteed time program, requests from about 200 guest observer teams per year, and observatory maintenance. SIRFT is characterized by the five-year life time due to cryogen boil-off which means that the ground system must be fully operational at launch and must operate with an efficiency and timeliness rarely achieved in previous space missions.

Miller, Richard B.↗
NASA NTRS1991

SIRTF stray light analysis

The Space Infrared Telescope Facility (SIRTF) is a 1-meter cryogenic infrared telescope. Stray light is kept below the natural background by restrictions on sun, Earth, and moon off-axis angles; by conservative baffle design; by the use of advanced diffuse black coatings; and by superfluid helium cooling. The aperture stop is located at the primary mirror rather than at the secondary mirror to increase the aperture and reduce the central obscuration. Stray light from off-axis sources is greater with the aperture stop at the primary than with the aperture stop at the secondary, but the modulation of the signal produced by tilting of the secondary mirror for chopping is less. Stray light from telescope thermal emission is lower with the aperture stop at the primary.

Elliott, David G.↗
NASA NTRS1998

WIRE, SOFIA and SIRTF

WIRE, SOFIA and SIRTF are three planned NASA missions for infrared astronomy. Each will make significant contributions to the study of exo-zodiacal dust, planetary debris disks, and/or the zodiacal material within our own solar system. These missions and their measurement and scientific capabilities are synopsized. The principal contribution of these missions to this field of study will be to establish and strengthen its intellectual foundations rather than to pinpoint specific targets for planetary searches. This is consistent with their relatively near-term availability. Moreover, this intellectual understanding can assure that subsequent missions approach this subject from a sound scientific perspective which will yield valuable results independent of the success of a particular planet finding strategy. Each of these missions - most urgently WIRE with its Fall, 1998 launch date - would make good use of a list of candidate target stars for exo-zodiacal/planet-finding studies. The preparation of such a list was one of the recommendations of the exo-zodiacal workshop.

Werner, Michael↗
NASA NTRS2000

Cryo-Transmittance and -Reflectance of Filters and Beamsplitters for the SIRTF Infrared Array Camera

The Space Infrared Telescope Facility (SIRTF) Infrared Array Camera (IRAC) uses two dichroic beamsplitters, four bandpass filters, and four detector arrays to acquire images in four channels at wavelengths between 3 and 10 micron. Accurate knowledge of the pass bands is necessary because, in order to meet the science objectives, IRAC is required to do 2% relative photometry in each band relative to the other bands. We report the in-band and out-of-band polarized transmittance and reflectance of these optical elements measured near the instrument operating temperature of 1.4 K. Details of the experimental apparatus, which include a continuous flow liquid helium optical cryostat and a Fourier transform infrared (FTIR) spectrometer are discussed.

Stewart, Kenneth P.↗
NASA NTRS1995

(abstract) Wide Dynamic Range Porous Plug and Vent Line for SIRTF

The most recent approach to the Space Infrared Telescope Facility (SIRTF) uses a new design concept in which the telescope is launched warm and subsequently cooled to operating temperture on orbit. At launch the cryostat is at 2 K and the telescope is at room temperature. Cooldown of the telescope will be accomplished initially through radiation to space. Final cooldown to the 5.5 K operating temperature is done with helium vapor. Initially the helium flow on orbit will be 10 to 20 times larger than required for steady-state operation. The vent line and the liquid-vapor phase separator (porous plug) therefore must accomodate a large dynamic operational range. For ground testing of IR instruments, the required temperature is 1.5 K. The helium tank temperature for both ground testing and space operations thus needs to be 1.4 K. We will present a discussion of the requirements, a conceptual design, and initial laboratory test results with candidate porous plugs and associated instrumentation. A discussion of possible connections to the design of Gravity Probe-B cryostat will also be presented.

infrared space helium cryostat↗
NASA NTRS1994

SIRTF Telescope Optical Engineering

SIRTF has undergone recent replanning to address new cost constraints while defining a scientifically compelling mission faithful to the Bahcall report priorities and responsive to recent scientific developments.

cryogenic infrared observatory heliocentric orbit ↗
NASA NTRS2001

Registered File Support for Critical Operations Files at (Space Infrared Telescope Facility) SIRTF

The SIRTF Science Center's (SSC) Science Operations System (SOS) has to contend with nearly one hundred critical operations files via comprehensive file management services. The management is accomplished via the registered file system (otherwise known as TFS) which manages these files in a registered file repository composed of a virtual file system accessible via a TFS server and a file registration database. The TFS server provides controlled, reliable, and secure file transfer and storage by registering all file transactions and meta-data in the file registration database. An API is provided for application programs to communicate with TFS servers and the repository. A command line client implementing this API has been developed as a client tool. This paper describes the architecture, current implementation, but more importantly, the evolution of these services based on evolving community use cases and emerging information system technology.

file management services↗
NASA NTRS2002

Operating SIRTF for maximum lifetime

The instruments of the Space Infrared Telescope Facility (SIRTF) are cooled directly by liquid helium, while the optical system is cooled by helium vapor. The greater the power dissipation into the liquid helium, the more vapor is produced, and the colder the telescope. Observations at shorter wavelengths do not require telescope temperatures as low as those required at longer wavelengths. By taking advantage of this, it may be possible to extend the helium and mission lifetime by 10% or even 20%.

cryogenics↗