Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SAGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Radiation characterization summary for the WSMR fast burst reactor environment at the 6-inch location

The characterization of the neutron, prompt gamma-ray, and delayed gamma-ray radiation fields for the White Sands Missile Range (WSMR) Fast Burst Reactor, also known as molybdenum-alloy Godiva (Molly-G) has been assessed at the 6-inch irradiation location. The neutron energy spectra, uncertainties, and common radiation metrics are presented. Code-dependent recommended constants are given to facilitate the conversion of various dosimetry readings into radiation metrics desired by experimenters. The Molly-G core was designed and configured similarly to Godiva II, as an unreflected, unmoderated, cylindrical annulus of uranium-molybdenum-alloy fuel with molybdenum loading of 10%. At the 6-inch position, the axial fluence maximum is about 2.4×10 13 n/cm 2 per MJ of reactor energy; about 0.1% of the neutron fluence is below 1 keV and 96% is above 100 keV. The 1-MeV Damage-Equivalent Silicon (DES) fluence is estimated at 2.2×10 13 n/cm 2 per MJ of reactor energy. The prompt gamma-ray dose is roughly 2.5E+03 rad(Si) per MJ and the delayed gamma-ray dose is about 1.3E+03 rad(Si) per MJ.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Epitaxial growth of rock salt MgZrN 2 semiconductors on MgO and GaN

Ternary nitride compound semiconductors have attracted recent attention as electronic materials since their properties can be tuned by cation stoichiometry and ordering. A recently discovered example is MgZrN 2 , a ternary analog to the rock salt semiconductor ScN. MgZrN 2 has a larger bandgap and stronger dielectric response than the binary compound. Polycrystalline thin films of MgZrN 2 have been studied, but demonstration of high-quality growth is still required to establish its suitability for technological applications. Here, we report on epitaxial growth of MgZrN 2 thin films on (100) and (111) MgO substrates and (001) GaN templates. The MgZrN 2 composition is confirmed by Rutherford backscattering spectrometry, showing no oxygen in the film except for a thin surface oxide layer. Epitaxial growth results in MgZrN 2 with x-ray diffraction rocking curves with a full-width at half-maximum in the range of 0.3–3.0°, depending on the substrate. Transmission electron microscopy analysis of the MgZrN 2 film grown on a (111) MgO substrate confirms epitaxial growth and shows a sharp film/substrate interface. In-plane temperature-dependent Hall effect measurements show that the material is an n-type semiconductor with a relatively high concentration ( n 300K ≈ 10 19 –10 20 cm -3 ) of thermally activated electrons. Room-temperature transport measurements show a conductivity of 25 S cm -1 and a Seebeck coefficient of -80 μ V K -1 . Overall, these results provide an important step toward integration of rock salt MgZrN 2 with other technological nitrides for device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Autonomous sputter synthesis of thin film nitrides with composition controlled by Bayesian optimization of optical plasma emission

Autonomous experimentation has emerged as an efficient approach to accelerate the pace of material discovery. Although instruments for autonomous synthesis have become popular in molecular and polymer science, solution processing of hybrid materials, and nanoparticles, examples of autonomous tools for physical vapor deposition are scarce yet important for the semiconductor industry. Here, we report the design and implementation of an autonomous workflow for sputter deposition of thin films with controlled composition, leveraging a highly automated sputtering reactor custom-controlled by Python, optical emission spectroscopy (OES), and a Bayesian optimization algorithm. We modeled film composition, measured by x-ray fluorescence, as a linear function of plasma emission lines monitored during co-sputtering from elemental Zn and Ti targets in an N 2 and Ar atmosphere. A Bayesian control algorithm, informed by OES, navigates the space of sputtering power to fabricate films with user-defined compositions by minimizing the absolute error between desired and measured optical emission signals. We validated our approach by autonomously fabricating Zn x Ti 1-x N y films that deviate from the targeted cation composition by a relative ±3.5%, even for 15 nm thin films, demonstrating that the proposed approach can reliably synthesize thin films with a specific composition and minimal human interference. Moreover, the proposed method can be extended to more difficult synthesis experiments where plasma intensity lines depend non-linearly on pressure, or the elemental sticking coefficients strongly depend on the substrate temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2024

GdWN 3 is a nitride perovskite

Nitride perovskites ABN3 are an emerging and highly underexplored class of materials that are of interest due to their intriguing calculated ferroelectric, optoelectronic, and other functional properties. Incorporating novel A-site cations is one strategy to tune and expand such properties; for example, Gd 3+ is compelling due to its large magnetic moment, potentially leading to multiferroic behavior. However, the theoretically predicted ground state of GdWN 3 was a non-perovskite monoclinic structure. Here, we experimentally show that GdWN 3-y crystallizes in a perovskite structure. High-throughput combinatorial sputtering with activated nitrogen is employed to synthesize thin films of Gd 2-x W x N 3-y O y with oxygen content y < 0.05. Ex situ annealing crystallizes a polycrystalline perovskite phase in a narrow composition window near x = 1. LeBail fits of synchrotron grazing incidence wide angle x-ray scattering data are consistent with a perovskite ground-state structure. Refined density functional theory calculations that included antiferromagnetic configurations confirm that the ground-state structure of GdWN 3 is a distorted Pnma perovskite with antiferromagnetic ordering, in contrast to prior predictions. Initial property measurements find that GdWN 3-y is paramagnetic down to T = 2 K with antiferromagnetic correlations and that the absorption onset depends on cation stoichiometry. This work provides an important path toward both the rapid expansion of the emerging family of nitride perovskites and understanding their potential multiferroic properties.

14 SOLAR ENERGY↗
DOE OSTI2026

Interplay of ferromagnetic and antiferromagnetic interactions in epitaxial Co 3 ZnN

Antiperovskite nitrides with the general formula M 3 AN have attracted significant attention due to their tunable electronic and magnetic properties. Among them are many cobalt-based compounds predicted to exhibit high thermodynamic stability and intriguing magnetic behavior. Here, we report the synthesis and magnetic characterization of epitaxial Co3ZnN thin films grown by radio frequency sputtering on SrTiO 3 (STO) and MgO substrates. X-ray diffraction confirms phase-pure (00l)-oriented films with cube-on-cube epitaxy on STO, with a c-lattice parameter of 3.752 Å. Magnetic measurements reveal clear hysteresis at 2 K with a coercive field of ∼0.11 T and a small net moment of 0.108 μ B /f.u., suggesting either a canted antiferromagnetic (AFM) or ferrimagnetic (FiM) configuration. Temperature-dependent magnetization measurements show a transition near 25 K, with strong AFM interactions with Curie–Weiss temperature (Θ) = −80.13 K. Complementary density functional theory and Monte Carlo simulations indicate a ferromagnetic (FM) ground state, with the FM–AFM energy difference decreasing systematically with increasing supercell size, consistent with competition between FM and AFM/FiM interactions. These results highlight Co3ZnN as a magnetically complex antiperovskite nitride with competing exchange interactions.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Multiscale fatigue crack initiation in hierarchical additively manufactured alloys

Bioinspired hierarchical microstructures offer a route toward engineered fatigue resistance in additively manufactured alloys. However, it remains unclear how discrete structural constituents independently govern damage accumulation, particularly during the critical fatigue initiation regime where short cracks strongly interact with local microstructure. Here, we investigate multiscale fatigue initiation in a dual-phase, nanolamellar AlCoCrFeNi 2.1 high-entropy alloy. By comparing microscale specimens that isolate the nanolamellar structure against macroscale specimens containing the full melt-pool architecture, we identify size-dependent fatigue initiation mechanisms. We find that failure is dictated by nanolamellar interfaces at the microscale, whereas mesoscale melt pool boundaries serve to initiate fatigue at the macroscale. This mechanistic shift is accompanied by a transition from macroscale quasi-brittle failure to microscale plasticity-driven crack extension. Our results provide a physical framework for understanding how structural hierarchy governs the transition from discrete microstructural deformation to continuum fatigue fracture behavior, informing the design of damage-tolerant, additively manufactured alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Metal Chalcogenides for Neuromorphic Computing: Emerging Materials and Mechanisms

The approaching end of Moore's Law scaling has significantly accelerated multiple fields of research including neuromorphic-, quantum-, and photonic computing, each of which possesses unique benefits unobtained through conventional binary computers. One of the most compelling arguments for neuromorphic computing systems is power consumption, noting that computations made in the human brain are approximately 106 times more efficient than conventional CMOS logic. This review article focuses on the materials science and physical mechanisms found in metal chalcogenides that are currently being explored for use in neuromorphic applications. We begin by reviewing the key biological signal generation and transduction mechanisms within neuronal components of mammalian brains and subsequently compare with observed experimental measurements in chalcogenides. With robustness and energy efficiency in mind, we will focus on short-range mechanisms such as structural phase changes and correlated electron systems that can be driven by low-energy stimuli, such as temperature or electric field. We aim to highlight fundamental materials research and existing gaps that need to be overcome to enable further integration or advancement of metal chalcogenides for neuromorphic systems.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Regional epithelial cell diversity in the small intestine of pigs

Abstract Understanding regional distribution and specialization of small intestinal epithelial cells is crucial for developing methods to control appetite, stress, and nutrient uptake in swine. To establish a better understanding of specific epithelial cells found across different regions of the small intestine in pigs, we utilized single-cell RNA sequencing (scRNA-seq) to recover and analyze epithelial cells from duodenum, jejunum, and ileum. Cells identified included crypt cells, enterocytes, BEST4 enterocytes, goblet cells, and enteroendocrine (EE) cells. EE cells were divided into two subsets based on the level of expression of the EE lineage commitment gene, NEUROD1. NEUROD1hi EE cells had minimal expression of hormone-encoding genes and were dissimilar to EE cells in humans and mice, indicating a subset of EE cells unique to pigs. Recently discovered BEST4 enterocytes were detected in both crypts and villi throughout the small intestine via in situ staining, unlike in humans, where BEST4 enterocytes are found only in small intestinal villi. Proximal-to-distal gradients of expression were noted for hormone-encoding genes in EE cells and nutrient transport genes in enterocytes via scRNA-seq, demonstrating regional specialization. Regional gene expression in EE cells and enterocytes was validated via quantitative PCR (qPCR) analysis of RNA isolated from epithelial cells of different small intestinal locations. Though many genes had similar patterns of regional expression when assessed by qPCR of total epithelial cells, some regional expression was only detected via scRNA-seq, highlighting advantages of scRNA-seq to deconvolute cell type-specific regional gene expression when compared to analysis of bulk samples. Overall, results provide new information on regional localization and transcriptional profiles of epithelial cells in the pig small intestine.

Agriculture↗
DOE OSTI2024

Multicriteria Measures to Assess the Sustainability of Diets: A Systematic Review

Abstract Context Assessing the overall sustainability of a diet is a challenging undertaking requiring a holistic approach capable of addressing the multicriteria nature of this concept. Objective The aim was to identify and summarize the multicriteria measures used to assess the sustainability characteristics of diets reported at the individual level by healthy adults. Data Sources Articles were identified via PubMed, Scopus, and Web of Science. The search strategy consisted of key words and MeSH terms, and was concluded in September 2022, covering references in English, Spanish, and Portuguese. Data Extraction This systematic review followed the PRISMA guidelines. The search identified 5663 references, from which 1794 were duplicates. Two reviewers independently screened the titles and abstracts of each of the 3869 records and the full-text of the 144 references selected. Of these, 7 studies met the inclusion criteria. Data Analysis A total of 6 multicriteria measures were identified: 3 different Sustainable Diet Indices, the Quality Environmental Costs of Diet, the Quality Financial Costs of Diet, and the Environmental Impact of Diet. All of these incorporated a health/nutrition dimension, while the environmental and economic dimensions were the second and the third most integrated, respectively. A sociocultural sustainability dimension was included in only 1 of the measures. Conclusion Despite some methodological concerns in the development and validation process of the identified measures, their inclusion is considered indispensable in assessing the transition towards sustainable diets in future studies. Systematic Review Registration PROSPERO registration no. CRD42022358824.

Rei, Mariana (ORCID:0000000189453708)↗
DOE OSTI2025

Structural stability, elemental ordering, and transport properties of layered ScTaN 2

Ternary transition metal (TM) nitrides have gained significant attention in thin film research due to their promising properties for a broad range of applications. Particularly, some of the ternary TM nitrides have been predicted to adopt layered structures that make them interesting for thermoelectric conversion and quantum materials applications. Unfortunately, synthesis of TM ternary nitride films by physical vapor deposition often favors disordered 3D structures rather than the predicted 2D-like layered structure. In this study, we investigate the structural interplay in the Sc-Ta-N ternary system using a combinatorial approach. Combinatorial libraries S⁢c 𝑥 ⁢T⁢a 1−𝑥 ⁢N are synthesized following a two-step method: First, deposit film precursors by cosputtering and then process the resulting 3D-structured samples with rapid thermal annealing. Synchrotron grazing-incidence wide-angle x-ray scattering on films annealed at 1200 ⁢°⁢C for 20 min leads to the nucleation of ScTaN 2 layered structure (𝑃⁢6 3 /𝑚⁢𝑚⁢𝑐) near stoichiometry. We find that the layered structure can accommodate large off-stoichiometry in the Ta-rich region (𝑥 < 0.5), facilitated by the alloying with quasi-isostructural Ta 5 ⁢N 6 compound that exists on a composition tie line at 𝑥 = 0. While focusing on ScTaN 2 , we estimate the long-range order parameter in near-stoichiometric films to be 0.86, corresponding to a fraction of Sc/Ta antisites of 7%. Transport measurements on ScTaN 2 reveal a nearly temperature-independent high carrier density (10 21 c⁢m −3 ), suggesting a heavily doped semiconductor or semimetallic character, consistent with a small positive Seebeck coefficient of +19 µV/K. The carrier mobility at 2 K is relatively small (9.5c⁢m 2 V −1 s −1 ) and the residual-resistivity ratio is minor, suggesting that electrical conduction is dominated by defects or disorder. Measured magnetoresistance suggests possible weak antilocalization at 2 K. This paper highlights the interplay between ScTaN 2 and Ta 5 ⁢N 6 crystal structures in stabilizing layered materials, emphasizes the importance of cation order/disorder for potential tunable alloys, and suggests that ScTaN 2 is a promising platform for exploring electronic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Ferrimagnetic Order in Tetragonal Antiperovskite Mn3GeN

The crystal and magnetic structures of the nitride antiperovskite M⁢n3⁢GeN reveals ferrimagnetic order stemming from a distorted kagome-derived lattice of the Mn atoms. Polycrystalline M⁢n3⁢GeN was synthesized via a solid-state reaction and characterized using neutron powder diffraction, dc magnetometry, and first-principles calculations. Rietveld refinement reveals near-stoichiometric composition (M⁢n3⁢Ge⁢N0.992⁢(7)) adopting a tetragonal 𝐼⁢4/𝑚⁢𝑐⁢𝑚 structure at 𝑇=500K and below, featuring axially distorted and tilted [NM⁢n6] octahedra that result in a buckled Mn kagome lattice. On heating, the tetragonal distortion and octahedral tilt angle decrease continuously before transitioning to the cubic 𝑃⁢𝑚⁢3⁢𝑚 antiperovskite phase at 𝑇≈527K. Neutron diffraction and magnetometry together reveal noncollinear ferrimagnetic ordering. For 30K≤𝑇≤500K, the magnetic structure is described by magnetic space group 𝐼⁢𝑏⁢𝑎′⁢𝑚′ (72.544), with inequivalent Mn1 and Mn2 sublattices that couple antiferromagnetically to yield a net moment. Density-functional theory-based calculations show that the different local moments originate from the bandwidths associated with distinct Mn–N bond lengths. Temperature-dependent refinements reveal distinct differences in the thermal disordering profiles of the Mn1 and Mn2 sublattices. These findings reveal a subtlety in the magnetic and structural behavior of M⁢n3⁢GeN, highlighting the interplay between structural distortions, magnetic ordering, and electronic structure in kagome-derived antiperovskite materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Broadband, High Efficiency OMT in E-Band

A high-performance, broadband E-Band orthomode transducer (OMT) was designed and fabricated for a dedicated frequency converter. Cross-polarized signals between 71 and 86 GHz, received in a TE 11 mode circular waveguide needed to be split into separate horizontal and vertical polarization channels. The purpose of the OMT is to service the 71–76 and 81–86 GHz licensed communication bands. The main goal of OMT design is maximized transmission across the design bandwidth. Every fraction of a dB lost before the first low noise amplifier is a direct loss in SNR for the overall system. Several different design approaches were simulated, and several OMT’s and ancillary components were built and tested. In the end, practical limitations determined the final path of the completed device. The final product performed several tenths of a dB better than commercially available devices and better than most reported in academic literature. Lessons learned included which construction techniques worked and did not work, as well as what compromises are acceptable.

42 ENGINEERING↗
DOE OSTI2025

Additive Manufactured Compact Microwave Absorbers

A high-performance, compact microwave absorber was created using Fused Deposition Modeling (FDM) 3D printing. Both a narrowband and a broadband absorber were created. The narrowband absorber was designed at 4.9 GHz, mid-band in WR-187 waveguide. The broadband absorber tried to achieve the best attenuation across the entire 3.95 to 5.85 GHz band. Two types of carbon loaded polylactic acid (PLA) plastic and one type of unloaded PLA were 3D printed with variable percentages of air to achieve different values of effective dielectric constant and loss tangent. The absorber comprised five or six rectangular pieces of these plastic materials. The thickness and fill factor values for each piece were optimized to minimize reflection through fast analytic modeling in MATLAB®. The results were then verified by HFSS® simulation as well. The stack progressed from the lowest loss and lowest dielectric constant to the highest at the shorting end. The final narrowband load had simulated return loss of 87 dB at 4.9 GHz with an analytic solution in MATLAB. The measured return loss of the 3D printed attenuator was 73 dB at 4.929 GHz. The total length of the absorber was 2.44 inches. A commercial absorber for WR-187 with return loss of 40 dB has length of 13 inches. The experiment proves that an effective and compact microwave absorber can be created using 3D printing.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Environmental factors have a greater influence on photosynthetic capacity in C 4 plants than biochemical subtypes or growth forms

Our understanding of how photosynthetic capacity varies among C 4 species and across growth and measurement conditions remains limited. We collated 1696 CO 2 response curves of net CO 2 assimilation rate (A/C i curves) from C 4 species grown and measured at various environmental conditions and used these data to estimate the apparent maximum carboxylation activity of phosphoenolpyruvate carboxylase (V pmaxA ) and CO 2 -saturated net photosynthetic rate (A max ), two key parameters describing photosynthetic capacity. We examined how V pmaxA and A max vary with species-specific traits, growth and measurement conditions.

59 BASIC BIOLOGICAL SCIENCES↗