Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reaction history”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Smoldering News From STS-77 Endeavour

The Microgravity Smoldering Combustion (MSC) experiment lifted off aboard the Space Shuttle Endeavour for its second flight in May 1996, as part of the STS-77 mission. This experiment is part of a series of studies focused on the smolder characteristics of porous combustible materials in a microgravity environment. Smoldering is a nonflaming form of combustion that takes place in the interior of combustible materials. Common examples of smoldering are nonflaming embers, charcoal briquettes, and cigarettes. The objective of this study is to provide a better understanding of the controlling mechanisms of smoldering in microgravity and normal Earth gravity (1g). As with other forms of combustion, gravity affects the availability of air and transport of heat, and therefore, the rate of combustion. The results of the microgravity experiments will be compared with identical ones carried out in 1g. In addition, they will be used to verify present theories of smolder combustion and will provide new insights into the process of smoldering combustion, enhancing our fundamental understanding of this frequently encountered combustion process and guiding improvements in fire safety practices. Two smoldering combustion tests with polyurethane foam were successfully accomplished during the STS-77 mission. The tests investigated smoldering combustion in a quiescent (no-flow) enriched oxygen environment, and in an air environment with a 2-mm/sec airflow through the fuel sample. The primary data from the tests are the ignition characteristics, spread rate, smolder reaction temperature, and products of combustion (solid and gas). On both the first mission on STS-69 and the second mission on STS-77, a smolder front propagated the length of the forced-flow samples, with the spread rate between the corresponding upward and downward 1g smolder rates. Neither of the quiescent cases propagated combustion (the first case was due in part to a problem with the experiment electronics). These results show a dramatic difference from the normal gravity results, where smolder propagation is very rapid and complete for both of these conditions. The experiment was conceived by Prof. A. Carlos Fernandez-Pello at the University of California-Berkeley. The MSC hardware was designed and built at the NASA Lewis Research Center by a team of civil servants and contractors from NYMA, Inc., and Aerospace Design & Fabrication, Inc. (ADF). The hardware consists of two sealed aluminum combustion chambers (each being a half a cylinder). The chambers hold the MSC test section, data acquisition electronics, power distribution electronics, and instrumentation. The hardware is fitted into a 5-ft(sup 3) Get-Away-Special (GAS) canister that is mounted in the shuttle cargo bay. The test section consists of a quartz cylinder that contains the polyurethane foam sample and an igniter. This igniter, which is an electrically heated wire sandwiched between two porous ceramic disks, is mounted in contact with the end of the foam sample. An array of 12 thermocouples placed axially and radially along the foam sample provide temperature histories, which are used to determine the rate of smolder propagation, and the characteristics of the reaction.

Koudelka, John M.↗
NASA NTRS1993

Formaldehyde and organic molecule production in astrophysical ices at cryogenic temperatures

Thermally promoted formaldehyde (H2CO) reactions in cryogenic ices have been studied to test their importance as a source of organic molecules in comets and interstellar ices. Ices containing H2CO, H2O, CH3OH, CO, and NH3 were investigated by using infrared spectroscopy. Small traces of NH3 (NH3/H2CO equal to or greater than 0.005) are sufficient to convert significant fractions (40 percent or greater) of the H2CO into more complex organics. However, H2CO reactions do not proceed without NH3. Spectral evidence for reaction onset appeared between 40 and 80 K, depending on the ice. Five distinct products were formed. These principally consist of polyoxymethylene and related derivatives. Polyoxymethylene itself was not made in significant amounts in cometary analogs. These products differ from those produced by ultraviolet and particle irradiation. The nature and relative amounts of the products depend on the initial composition, making these materials excellent tracers of a comet's history. About 3 percent of the organics in p-Halley's coma could have been produced by thermal H2CO reactions.

Schutte, W. A.↗
NASA NTRS1982

Characterization of soil and postlaunch pad debris from Cape Canaveral launch complex and analysis of soil interaction with aqueous HCl

Soil samples were fractionated and analyzed in order to assess the physical and chemical interactions of entrained soil with solid-rocket exhaust clouds. The sandy soil consisted primarily of quartz (silica) particles, 30 to 500 microns in diameter, and also contained seashell fragments. Differential and cumulative soil-mass size distributions are presented along with mineralogy, elemental compositions, and solution pH histories. About 90 percent of the soil mass consisted of particles 165 microns in diameter. Characteristic reaction times in aqueous HC1 slurries varied from a few minutes to several days, and capacities for reaction under acidic conditions varied from 10 to 40 g HCl/kg soil, depending on particle size. Airborne lifetimes of particles 165 microns are conservatively 30 min, and this major grouping is predicted to represent a small short-term chemical sink for up to 5% of the total HC1. The smaller and more minor fractions, below a 165 micron diameter, may act as giant cloud condensation nuclei over much longer airborne lifetimes. Finally, the demonstrated time dependency of neutralization is a complicating factor; it can influence the ability to deduce in-cloud HCl scavenging with reaction and can affect the accuracy of measured chemical compositions of near-field wet deposition.

Pellett, G. L.↗
NASA NTRS1983

The isotopic composition and concentration of Ag in iron meteorites and the origin of exotic silver

The isotopic composition of Ag and the concentration of Ag and Pd in Canyon Diablo (IA), Grant (IIIB), Santa Clara, Tlacotepec and Warburton Range (IVB), Pinon and Deep Springs (anom) were analyzed. Troilite from Santa Clara and from Grant was also studied. With the exception of IA, all the meteorites were enriched in Ag-107 by about 2%-212% and the ratio of Ag-107/Ag-109 in the metal phase was found to be greater than the terrestrial value. Ag of anomalous isotopic composition was found to be common in all IVB and anomalous meteorites. A correlation of Ag-107/Ag-109 with Pd/Ag was established except for the iron meteorite of Santa Clara. The excess Ag-107 is thought to result from the decay of Pd-107. The Grant data appear to represent a Pd-107-Ag-107 isochron and indicate that the cooling rate at elevated temperatures was rapid enough to preserve the isotopic differences between metal and troilite. The data suggest that Ag in Santa Clara is made up of almost pure Ag-107 produced from Pd-107 decay and Ag-109 produced by nuclear reactions with only a small amount of 'normal' Ag. This indicates an intense energetic particle bombardment history in the early solar system which occurred after the formation of small planetary bodies.

Kaiser, T.↗
NASA NTRS1991

Evaluation of telerobotic systems using an instrumented task board

An instrumented task board was developed at NASA Marshall Space Flight Center (MSFC). An overview of the task board design, and current development status is presented. The task board was originally developed to evaluate operator performance using the Protoflight Manipulator Arm (PFMA) at MSFC. The task board evaluates tasks for Orbital Replacement Unit (ORU), fluid connect and transfers, electrical connect/disconnect, bolt running, and other basic tasks. The instrumented task board measures the 3-D forces and torques placed on the board, determines the robot arm's 3-D position relative to the task board using IR optics, and provides the information in real-time. The PFMA joint input signals can also be measured from a breakout box to evaluate the sensitivity or response of the arm operation to control commands. The data processing system provides the capability for post processing of time-history graphics and plots of the PFMA positions, the operator's actions, and the PFMA servo reactions in addition to real-time force/torque data presentation. The instrumented task board's most promising use is developing benchmarks for NASA centers for comparison and evaluation of telerobotic performance.

Carroll, John D.↗
NASA NTRS1992

Interchangeable end effector tools utilized on the PFMA

An instrumented task board, used for measuring forces applied by the Protoflight Manipulator Arm (PFMA) to the task board, was fabricated and delivered to Marshall Space Flight Center. SRS Technologies phased out the existing IBM compatible data acquisition system, used with a instrumented task board, and integrated the force measuring electronic hardware in with the Macintosh II data acquisition system. The purpose of this change was to acquire all data with the same time tag, allowing easier and more accurate data reduction in addition to real-time graphics. A three-dimensional optical position sensing system for determining the location of the PFMA's end effect or in reference to the center of the instrumented task board was also designed and delivered under. An improved task board was fabricated which included an improved instrumented beam design. The modified design of the task board improved the force/torque measurement system by increasing the sensitivity, reliability, load range and ease of maintenance. A calibration panel for the optical position system was also designed and fabricated. The calibration method developed for the position sensors enhanced the performance of the sensors as well as simplified the installation and calibration procedures required. The modifications made under this effort expanded the capabilities of the task board system. The system developed determines the arm's position relative to the task board and measures the signals to the joints resulting from the operator's control signals in addition to the task board forces. The software and hardware required to calculate and record the position of the PFMA during the performance of tasks with the instrumented task board were defined, designed and delivered to MSFC. PFMA joint input signals can be measured from a breakout box to evaluate the sensitivity or response of the arm operation to control commands. The data processing system provides the capability for post processing of time-history graphics and plots of the PFMA positions, the operator's actions, and the PFMA servo reactions in addition to realtime force and position sensor data presentation.

Cody, Joe↗
NASA NTRS2003

In Situ Heating Behavior by Infrared Microspectroscopy of Organic Components in Tagish Lake Meteorite

The Tagish Lake meteorite is a new type of water- and carbon-rich carbonaceous chondrite. Its total carbon content is approx. 5 wt% and the organic carbon content reaches approx.1.3 wt%. We reported from the Tagish Lake sample#TL3B6 the first in situ observation of the hollow organic globules. TL3B6 is generally enriched in the organic globules that consist of aliphatic and oxygenated functionality similar to the material produced by the laboratory simulation of UV photolysis of interstellar ice analogs suggesting that the organic globules in Tagish Lake may be extremely primitive organic material that formed before or during the formation of the solar system. Here we report the micro-sampling FTIR analysis of the TL3B6 and the in situ step heating experiments: which can allow us to place 1) significant constraints on the organic functionality in Tagish Lake; 2) the thermal stability of the organics; and 3) thermal history of the meteorite and its parent body. For comparison, the membranous films formed from hydrothermal reaction of an OH-bearing amino acid (theronine: Thr) and silica mixture were examined.

Nakamura, K.↗
NASA NTRSDate not supplied

Predicting Thermal Response in a Li-ion Cell on a UAV Fight Profile

As the energy storage devices continue to "pack" more energy in a small space, any damage, battery component failure, manufacturing defect, or electrically abusing the battery can lead to catastrophic thermal runaway events. A catastrophic thermal event in a cell leads to high temperature, in some instances spewing of battery materials due to gas development from side reactions initiated due to high internal temperatures. Also, a thermal runaway event can propagate from a single "failed" cell to the pack in a battery pack, leading to a more significant event. Mitigating a thermal runaway event is important in the commercial and automotive sectors. However, preventing such events in an electric aircraft (or air taxis) is paramount due to the lack of alternatives in the event of a failure. Battery prognostics algorithms allow the prediction of state-of-charge (SOC) and end-of-life (EOL) of a Li-ion battery in a UAV (unmanned air vehicle) [1]. For this presentation, we will extend this two-level battery predictive algorithm to predict SOC, EOL, and estimated maximum temperature during a simulated flight. The model is extended by integrating a lumped physics-driven thermal model for high current densities [2]. The parameters used to control SOC and EOL are maximum storable charge, time constant for Li-ion diffusivity in the carbon particles, and internal cell resistance. Cycling leads to an increase in the heat generated by an aged Li-ion cell with a LiyCoO2 (LCO) cathode and a LixC6 (MCMB) anode. The aging of a cell leads to increase in SEI layer thickness, the diffusion time for the lithium ions inside the electrodes, and the local reaction rates, in addition to the thermodynamic abuse caused by fixed cycling voltages controlled by a Battery Management System. As the battery ages, the cell resistance increases, while the onset temperature of the thermal runaway decreases (depends on the cell chemistry and cell abuse history). Any large deviation of the cell temperature from the estimated (expected) value can identify a faulty cell. Since SEI decomposition has the lowest onset temperature in the series of reactions leading to thermal runaway, the model considers the self-heating rate of the SEI decomposition as onset temperature (similar to Ref. [3]). The parameters in the Arrhenius equation for the SEI heating rate depend on the number of cycles, the cell's operating temperature, and the cell's abuse history [4,5]. Coupling the electrochemical, thermal, and aging model allow the prognostic algorithm to estimate a typical cell voltage and temperature as a function of age (cycling and calendar), whose departure from measured values from the BMS is used to identify a safety event. In addition, we will present the results from two simulated flight scenarios for a UAV: typical and extreme, since the power requirements vary significantly during take-off, landing, and changing altitudes, while the power requirements remain low during the cruise. For this presentation, the power requirement for a battery pack in a UAV is scaled to a single cell. This cell is cycled through a simulated profile, and the data is collected and used to predict a safety event.

Li-ion↗
DOE OSTI2026

Covalent Adaptable Networks: Reprocessable Cross-Linked Polymers

Thermoset polymers have desirable properties, such as excellent thermal and mechanical stability, but their covalent cross-links typically prevent repair or recycling. By enabling and controlling dynamic exchange reactions within polymer networks, their covalent bonds rearrange and allow the polymer to be reshaped. These viscoelastic polymer networks, now known as covalent adaptable networks (CANs), are an important frontier for improving plastic circularity, as well as for designing valuable stimuli-responsive materials. This Review describes the history of CANs, dating back to the early days of polymer science, and the evolution of their classification and nomenclature. A comprehensive survey of dynamic reactions and linkage chemistries is provided, as well as methods to characterize and reprocess CANs. Beyond straightforward reprocessing, many advanced applications of CANs and their composites are now emerging. Lastly, we provide perspective on how the development of new chemistries, strategies to control stimuli-responsive bond exchange and mechanical properties, and a deep understanding of exchange reactions will advance this field toward scalable, sustainable, and high-value materials.

Sun, Molly [Northwestern University, Evanston, IL ↗
DOE OSTI2025

Cosmological moduli and non-perturbative production of axions

Cosmological moduli generically come to dominate the energy density of the early universe, and thereby trigger an early matter dominated era. Such non-standard cosmological histories are expected to have profound effects on the evolution and production of axion cold dark matter and dark radiation, as well as their prospects for detection. We consider moduli-axion couplings and investigate the early history of the coupled system, considering closely the evolution of the homogeneous modulus field, the back-reaction from the axion, and the energy densities of the two fields. A particular point of interest is the enhancement of axion production from modulus decay, due to tachyonic and parametric resonant instabilities, and the implications of such production on the cosmological moduli problem, axion dark radiation, and the available parameter space for axion dark matter. Using an effective field theory approach, WKB-based semi-analytical analysis, and detailed numerical estimates of the co-evolution of the system, we evaluate the expected decay efficiency of the modulus to axions. The effects of higher-order operators are studied and implications for UV-complete frameworks such as the Large Volume Scenarios in Type IIB string theory are considered in detail.

Axions and ALPs↗
DOE OSTI2020

On the Pressure Generated by Thermite Reactions Using Stress-Altered Aluminum Particles

Here we examine pressure build-up and decay in thermites upon impact ignition and interprets reactivity based on the holistic pressure history. The thermite is a mixture of aluminum (Al) combined with bismuth trioxide (Bi 2 O 3 ) powder. Four different Al particles sizes were examined that ranged from 100 nm to 18.5 μm mean diameter and for each size, two different Al powder treatments were examined: stress-altered compared to untreated, as-received Al powder. Stress-altered Al powders have been shown to be more reactive, such that the stress-altered Al powder thermites offer a metric for analyzing thermite reactivity in terms of pressure development compared to untreated Al powder. In a binary thermite system, multiple phase changes and interface chemistry influence the transient pressure response during reaction. Results reveal three key pressure metrics that need consideration specifically for thermite combustion: (1) delay time to peak pressure, (2) peak pressure, and (3) decay after peak pressure. Our experiments show that a lower peak pressure corresponds with higher thermite reactivity because aluminum consumption of oxygen generated by decomposing solid oxidizer reduces the peak pressure. Faster rates of reaction consume oxygen at higher rates such that pressure development becomes more limited than less reactive thermites and the result is a lower peak pressure. This conclusion is opposite of traditional studies using metal fuels with a gaseous environment that typically show higher peak pressures correspond with greater reactivity.

42 ENGINEERING↗
NASA NTRS1978

Investigation of the Manicouagan impact crater, Quebec - An introduction

An interdisciplinary study of the 65-km diameter Manicouagan ring structure in Quebec was undertaken to gain insight into the integrated effects of impacts on terrestrial planetary bodies. The paper serves as an introduction to several companion papers and summarizes major conclusions. Studies of the 214 m.y. old structure show that the melt rocks are texturally inhomogeneous but chemically homogeneous and can be modeled as a mixture of target lithologies. The melt rocks have a Sr-87/Sr-86 ratio compatible with the melting of crustal rocks. The melt had a two-stage cooling history with clast-melt interactions indicative of mixing superheated silicate liquid with cold clasts. Grain size, clast reactions, and thermal equilibration of clasts and melts are described.

Phinney, W. C.↗
NASA NTRS1987

Chemical frost weathering of olivine: Experimental study and implications

New experimental results are reported on the frost weathering of olivine. After first weathering, a decrease in Fe sup 2(+)M(2) absorption bands were noted. This decrease is related to the protonation of O(+) in the mineral. It is contented that this reaction may result in the regolith storage of 100 to 1000 m of H(sub 2) over the history of Mars.

Harris, S. L.↗
DOE OSTI2020

Fast microflow kinetics and acid catalyst deactivation in glucose conversion to 5-hydroxymethylfurfural

5-Hydroxymethyl furfural (HMF) is an important platform chemical because it can be upgraded to various drop-in and performance-advantaged products. The cascade reaction of HMF production from glucose over a Lewis acid (CrCl 3 ) and a Brønsted acid (HCl) catalyst in aqueous media is investigated in a microreactor at short residence times and high temperatures. We study the formation of various chromium species using UV-visible spectrophotometry and elucidate the Cr(III) speciation. The catalyst reactivity increases sharply at short residence times, and then drops at long times. This indicates that the catalyst treatment plays a vital role in getting optimal reactivity, and recording the catalyst history is necessary. We develop a kinetic model to describe the catalyst speciation as well as the Lewis and Brønsted acid-catalyzed reaction kinetics using a hierarchical approach. Here, the model is in good agreement with experiments. We demonstrate the benefits of tandem Lewis-external added Brønsted acid catalysis in processing time, productivity, and catalyst stability. We apply this model to optimize the HMF yield and obtain ~36% yield at 200 °C in 7 min and report the highest productivity of ~15% yield per min, demonstrating the opportunity of reaching high productivity at short residence times.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effect of water vapor and thermal history on nuclear waste feed conversion to glass

Water affects the glass melting process by interacting with the foam layer at the glass melt surface and by influencing the batch conversion reactions. Water vapor from the nuclear waste slurry feed maintains a high water vapor pressure in the melter atmosphere. To investigate to what extent water vapor affects the vitrification of nuclear waste in joule-heated, cold-top melters, a series of feed expansion experiments were performed under humid and dry atmospheres using samples of low-activity waste (LAW) melter feed simulants. Melting of feed pellets in the presence of water vapor slightly decreased the temperature of primary foam onset, but did not significantly affect the feed volume expansion by foaming or the foam-collapse temperature. Sets of feed expansion experiments and evolved gas analyses were also performed to check the effect of thermal history on LAW feed samples tested as direct slurry, loose powder, and slow- and fast-dried pellets.

Marcial, Jose↗
DOE OSTI2024

Normative Ranges for Oculomotor and Reaction Time Tests in U.S. Military Service Members and Veterans

AbstractBackground Oculomotor and reaction time tests are frequently used assessments of vestibular symptoms, traumatic brain injury (TBI), or other neurological disorders in both clinical and research contexts. When interpreting these tests it is important to have a reference interval (RI) as a comparison for what constitutes a typical/expected response; however, the current body of research has only limited information regarding normative ranges calculated according to established standards or for a military-specific sample.Purpose The purpose of the present study was to describe RIs for oculomotor and reaction time tests in a cohort of service members and veterans (SMVs) for use as comparators by clinicians and scientists.Research Design Descriptive.Study Sample Participants were prospectively enrolled in the Defense and Veterans Brain Injury Center-Traumatic Brain Injury Center of Excellence 15-year Longitudinal Traumatic Brain Injury Study. Only SMVs without a history of TBI or blast exposure were included in the RI calculations.Data Collection and Analysis The test paradigms included in this analysis were: smooth pursuit, prosaccades, antisaccades, saccades and reaction time, predictive saccades, optokinetic nystagmus, auditory reaction time, and visual reaction time. Nonparametric methods, based on the U.S. Food and Drug Administration's recognized consensus standards, were used to calculate 95% RIs. A comparison between the calculated RIs and those available from previously published research is provided.Results Summary statistics and RIs were calculated for 47 outcome parameters from 13 oculomotor and reaction time tests. Sample sizes and age ranges varied across outcome parameters depending on the availability of reference values for RI calculations. The sample sizes used to calculate RIs ranged from 51 to 69. The age of SMVs included in each RI ranged from 19 to 61 years with mean ages ranging from 37 to 39 years. Similarities/differences between the RIs in the present study and those in previously published research are highly dependent on the outcome parameter; however, in general, the RIs in the present study tended to be somewhat wider.Conclusion The RIs provided in this paper can serve as comparisons for clinicians and scientists who are utilizing these oculomotor and reaction time testing paradigms in similar cohorts of patients or research participants.

Audiology & Speech-Language Pathology↗
NASA NTRS2003

The Status of Cross Section Measurements for Neutron-induced Reactions Needed for Cosmic Ray Studies

Cosmic ray interactions with lunar rocks and meteorites produce small amounts of radionuclides and stable isotopes. Advances in Accelerator Mass Spectrometry (AMS) allow production rates to be measured routinely in well-documented lunar rocks and meteorites. These measurements are analyzed using theoretical models to learn about the object itself and the history of the cosmic rays that fell on it. Good cross section measurements are essential input to the theoretical calculations. Most primary cosmic ray particles are protons so reliable cross sections for proton-induced reactions are essential. A cross section is deemed accurate if measurements made by different experimenters using different techniques result in consistent values. Most cross sections for proton induced reactions are now well measured. However, good cross section measurements for neutron-induced reactions are still needed. These cross sections are required to fully account for all galactic cosmic ray interactions at depth in an extraterrestrial object. When primary galactic cosmic ray (GCR) particles interact with an object many secondary neutrons are produced, which also initiate spallation reactions. Thus, the total GCR contribution to the overall cosmogenic nuclide archive has to include the contribution from the secondary neutron interactions. Few relevant cross section measurements have been reported for neutron-induced reactions at neutron energies greater than approximately 20 MeV. The status of the cross section measurements using quasi-monoenergetic neutron energies at iThemba LABS, South Africa and white neutron beams at Los Alamos Neutron Science Center (LANSCE), Los Alamos are reported here.

Sisterson, J. M.↗