Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RHE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Highly Selective Electrocatalytic Reduction of CO 2 into Methane on Cu–Bi Nanoalloys

Methane (CH 4 ), the main component of natural gas, is one of the most valuable products facilitating energy storage via electricity conversion. However, the poor selectivity and high overpotential for CH 4 formation with metallic Cu catalysts prevent realistic applications. Introducing a second element to tune the electronic state of Cu has been widely used as an effective method to improve catalytic performance, but achieving high selectivity and activity toward CH 4 remains challenging. Here, we successfully synthesized Cu–Bi NPs, which exhibit a CH 4 Faradaic efficiency (FE) as high as 70.6% at -1.2 V versus reversible hydrogen electrode (RHE). The FE of Cu–Bi NPs has increased by approximately 25-fold compared with that of Cu NPs. DFT calculations showed that alloying Cu with Bi significantly decreases the formation energy of *COH formation, the rate-determining step, which explains the improved performance. Further analysis showed that Cu that has been partially oxidized because of electron withdrawal by Bi is the most possible active site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Nitrogen-Defective Polymeric Carbon Nitride Nanolayer Enabled Efficient Electrocatalytic Nitrogen Reduction with High Faradaic Efficiency

Identifying highly selective catalysts and accurately measuring NH 3 yield without false-positives from contaminations remain two challenges in electrochemical nitrogen reduction reaction (NRR). Here, we report N-defective carbon nitride grown on carbon paper (CN/C) as a highly selective electrocatalyst. The NH 3 yield was determined reliably by the slope of mNH 3 -time plot rather than averaging the accumulated amount over time. Results showed the as-synthesized CN/ C 600 (synthesized at 600 °C) with a higher density of C=N-C N2C vacancies achieved an NH 3 production of 2.9 μg mgcat. -1 h -1 at -0.3 V (versus RHE), ~5.7-fold higher than CN/C 500 . The Faradaic efficiency for CN/ C 600 is among the highest of 62.1%, 33.9%, and 16.8% at -0.1 V, -0.2 V, and -0.3 V, respectively. The NH 3 production was verified by isotope 15 N 2 experiments. Further increase of N-defects on CN/C 600 using plasma etching led to higher NH 3 yield than comparably larger current, pointing to N-defects sites for promoting NRR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Cu-Doped Iron Oxide for the Efficient Electrocatalytic Nitrate Reduction Reaction

The electrochemical nitrate reduction reaction (NO 3 RR) is a promising alternative synthetic route for sustainable ammonia (NH 3 ) production, because it not only eliminates nitrate (NO 3 – ) from water but also produces NH 3 under mild operating conditions. However, owing to the complicated eight-electron reaction and the competition from the hydrogen evolution reaction, developing catalysts with high activities and Faradaic efficiencies (FEs) is highly imperative to improve the reaction performance. In this study, Cu-doped Fe 3 O 4 flakes are fabricated and demonstrated to be excellent catalysts for electrochemical conversion of NO 3 – to NH 3 , with a maximum FE of ~100% and an NH 3 yield of 179.55 ± 16.37 mg h –1 mg cat –1 at –0.6 V vs RHE. Here, theoretical calculations reveal that doping the catalyst surface with Cu results in a more thermodynamically facile reaction. These results highlight the feasibility of promoting the NO 3 RR activity using heteroatom doping strategies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Spin-Selective Oxygen Evolution Reaction in Chiral Iron Oxide Nanoparticles: Synergistic Impact of Inherent Magnetic Moment and Chirality

Electron spin polarization is identified as a promising avenue for enhancing the oxygen evolution reaction (OER), which is the bottleneck that limits the energy efficiency of water-splitting. Here, in this work, we report that both ferrimagnetic (f-Fe 3 O 4 ) and superparamagnetic iron oxide (s-Fe 3 O 4 ) catalysts can exhibit external magnetic field (Hext)-induced OER enhancement, and the activity is proportional to their intrinsic magnetic moment. Additionally, the chirality-induced spin selectivity (CISS) effect was utilized in synergy with Hext to get a maximum enhancement of up to 89% improvement in current density (at 1.8 V vs RHE) with a low onset potential of 270 mV in s-Fe 3 O 4 catalysts. Spin polarization and the resultant spin selectivity suppress the production of H 2 O 2 and promote the formation of ground state triplet O 2 during the OER. Furthermore, the design of chiral s-Fe 3 O 4 with synergistic spin potential effect demonstrates a high spin polarization of ∼42%, as measured using conductive atomic force microscopy (c-AFM).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

High-Performance Pt–Co Nanoframes for Fuel-Cell Electrocatalysis

Pt-based alloy catalysts are promising candidates for fuel-cell applications, especially for cathodic oxygen reduction reaction (ORR) and anodic methanol oxidation reaction (MOR). The rational design of composition and morphology is crucial to promoting catalytic performances. Here, we report the synthesis of Pt–Co nanoframes via chemical etching of Co from solid rhombic dodecahedra. The obtained Pt–Co nanoframes exhibit excellent ORR mass activity in acidic electrolyte, which is as high as 0.40 A mg Pt –1 initially and 0.34 A mg Pt –1 after 10 000 potential cycles at 0.95 V RHE . Furthermore, their MOR mass activity in alkaline media is up to 4.28 A mg Pt –1 and is 4-fold higher than that of commercial Pt/C catalyst. Furthermore, experimental studies indicate that the weakened binding of intermediate carbonaceous poison contributes to the enhanced MOR behavior. More impressively, the Pt–Co nanoframes also demonstrate remarkable stability under long-term testing, which could be attributed to the negligible electrochemical Co dissolution.

25 ENERGY STORAGE↗
DOE OSTI2022

Atomically Dispersed CuN x Sites from Thermal Activation of Boron Imidazolate Cages for Electrocatalytic Methane Generation

Atomically dispersed metal sites (ADMSs) have been recognized as promising candidates for electrochemical conversion. Among a diverse range of molecular precursors for ADMS synthesis, framework materials are particularly interesting due to their high degree of tunability and control over the primary coordination sphere of the metal ions. In this work, we demonstrate that a copper boron imidazolate cage, BIF-29(Cu), is a convenient precursor for a competent catalyst with isolated Cu sites coordinated by N donors for carbon dioxide electroreduction (CO 2 RR). Although BIF-29(Cu) exhibited moderate methane selectivity over hydrogen evolution reaction (HER), the methane selectivity is significantly enhanced by 2 times (55% CH 4 at –1.25 V vs RHE) after mild thermal activation. Extensive characterization methods indicate the transformation of crystalline BIF-29(Cu) into an amorphous carbonaceous material comprising isolated CuN x sites. Moreover, in situ X-ray absorbance spectroscopy indicates stable CuN x sites that are reduced during CO 2 RR. This work encourages the discovery of single-site electrocatalytic systems through a rational selection of molecular precursor and calcination parameters for promoting product selectivity.

10 SYNTHETIC FUELS↗
DOE OSTI2023

Electrochemical Evolution of Fuel Cell Platinum Nanocatalysts on Carbon Nanotubes at the Atomic Scale

The evolution of Pt nanoparticles supported on carbon nanotubes is analyzed before and after electrochemical potential cycling, using identical location aberration-corrected transmission electron microscopy, for applications in proton exchange membrane fuel cells. The work is focused on the half-cell accelerated stress test protocol of potential cycles ranging between 1.0 and 1.5 V RHE to represent the start-up/shutdown settings of a fuel cell vehicle. The research work reveals that particle migration and coalescence are key mechanisms for a reduction in the Pt nanoparticle surface area at the early stages of potential cycling. Further, the mechanism for particle movement and coalescence is attributed to carbon corrosion, catalyzed either by Pt or by bulk corrosion of the carbon nanotubes. Carbon corrosion results in the appearance of carbon vacancies at the carbon nanotube/Pt nanoparticle interface during cycling, as well as the formation of edge and surface defects. During cycling, the concentration of the dissoluble Pt increases. As soon as a significant amount is reached, subnanometer/atomic clusters emerge on the carbon nanotube support, which can move and coalesce, or redeposit on the surface of larger particles through Ostwald ripening.

25 ENERGY STORAGE↗
DOE OSTI2025

Mild-Annealed Molecular Layer Deposition (MLD) Tincone Thin Film as Photoelectrochemically Stable and Efficient Electron Transport Layer for Si Photocathodes

Metalcone thin films, composed of inorganic–organic hybrids, are synthesized using molecular layer deposition (MLD) through reactions between organometallic precursors (e.g., Sn, Al, and Ti) and organic reactants (e.g., ethylene glycol and glycerol). Despite their unique properties, metalcones exhibit significant vulnerability to water due to their organic components, limiting their potential in electrochemical applications. This study focuses on enhancing the photoelectrochemical stability of tincone thin films in aqueous electrolyte while preserving their hybrid characteristics through mild annealing in air at 250 °C. As-deposited and vacuum-annealed tincone thin films exhibited significant degradation under these conditions, while high-temperature-annealed (500 °C) tincone thin films offered improved stability with a significant decline in charge transfer efficiency. In contrast, mild annealing in air maintained the C–O bond at half level and improved the stability and charge transport without compromising the unique characteristics of tincone. This was confirmed by ellipsometry, X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FTIR). Mild-annealed tincone deposited on a lightly doped p-type silicon (p-Si) photocathode produced a 20-fold increase in CO volume compared to high-temperature annealed tincone in a CO 2 -saturated potassium bicarbonate (KHCO 3 ) electrolyte with dispersed graphene oxide–cobalt phthalocyanine (GO-CoPc) under 1 sun illumination at 0.9 V vs reversible hydrogen electrode (RHE), while maintaining the faradaic efficiency for CO and H 2 . These results suggest that mild-annealed tincone thin films hold significant potential as protective charge transport layers on silicon photocathodes for the aqueous CO 2 reduction reaction (CO 2 RR).

Annealing (metallurgy)↗
DOE OSTI2025

Pyrolysis in Molten Salts Converts Plastics into a Mesoporous Electrocatalyst with a High Density of Atomic Fe–N–C Active Site

Upcycling plastic waste into value-added products is a promising strategy for both economic and environmental sustainability. However, achieving control over structure–property correlations during the upcycling process remains challenging. Here, in this study, we investigate the modulation of active site formation during pyrolytic conversion of plastics to carbon by composition-controlled molten salts. Using melamine formaldehyde (MF) foams as a precursor, we demonstrate that their pyrolysis in eutectic chloride molten salts with Fe 2+ , Na + , and K + ions directs the carbonization process toward the formation of mesoporous functional carbon enriched with atomically dispersed Fe–N–C sites, which are well-known for their catalytic activity in oxygen reduction reaction (ORR). Compared to pyrolysis in the FeCl 2 -only salt, the incorporation of alkali metal ions (Na + , K + ) in the eutectic mixture facilitates nitrogen retention in the carbon matrix and modulates iron speciation. This synergistic environment promotes a higher density and more uniform dispersion of Fe–N–C moieties within the carbon matrix. Consequently, the resulting catalyst exhibits a high surface area, hierarchical porosity, and improved electrochemical properties. When tested as an ORR catalyst, the Fe–N–C-enriched catalyst delivers a high half-wave potential (E 1/2 = 0.875 V vs RHE) with nearly exclusive 4e – pathway. These properties are comparable to those of commercial Pt/C catalysts, along with improved stability.

Fe−N−C active sites↗
DOE OSTI2025

Ammonolysis Under NH 3 –Limiting Conditions as a Pathway to Improved LaTiO 2 N Water Splitting Photoanodes

LaTiO 2 N is a promising intermediate band gap semiconductor for the water splitting reaction, a pathway to hydrogen fuel from solar energy. However, the photoelectrochemical (PEC) activity of the material is hindered by defects, particularly Ti(III) species, which promote photocarrier recombination. These defects are formed during the high-temperature ammonolysis reaction. Here we show that improved LaTiO 2 N materials can be synthesized under NH 3 -limiting conditions by introducing N 2 to lower the NH 3 partial pressure to0.13atm.This reduces the Ti(III) defect density in the material from 6.06 × 10 16 to ∼4.61 × 10 15 cm −3 , by a factor of 13, based on electron paramagnetic resonance (EPR) spectroscopy. Any remaining Ti(III) defects are localized at the LaTiO 2 N surface, according to X-ray photoelectron spectroscopy (XPS), due to the formation of a depletion layer in the semico. Optical absorption spectra of the improved LaTiO 2 N reveal a blue-shifted band gap absorption edge and a suppressed sub-band gap absorption. Defect removal also reduces a sub-band gap surface photovoltage feature visible in the 1.0 atm reference material. The improved LaTiO 2 N supports a 1.57 mA cm −2 water oxidation photocurrent at 1.23 V RHE under simulated sunlight conditions, and an enhanced quantum efficiency of 4.5% (400 nm) for photocatalytic oxygen evolution from aqueous silver nitrate solution. Stable PEC operation is observed for over 55 min. This confirms that ammonolysis under NH 3 -limiting conditions improves the solar energy conversion properties of LaTiO 2 N. The ability to control metal ion defects in oxynitrides by varying the ammonia partial pressure during ammonolysis might be generally useful for the preparation of metal nitrides and oxynitrides.

defects↗
DOE OSTI2026

Elucidating the Structural and Electronic Effects of Ni and Mn Cationic Incorporation on CoOOH for Efficient Benzyl Alcohol Electrooxidation

Transition-metal oxyhydroxides such as CoOOH are promising low-cost electrocatalysts for the selective electrooxidation of organic molecules, yet the influence of ubiquitous transition-metal impurities on their performance and durability remains poorly understood. Here, we experimentally probed the individual and synergistic electrochemical and structural effects of Ni and Mn incorporations into model CoOOH electrocatalysts toward an efficient benzyl alcohol oxidation reaction (BAOR). Comprehensive electrochemical, microscopic, and spectroscopic analyses reveal that Ni incorporation enhances charge-transfer kinetics and overall activity through the formation of catalytically active Ni 3+ sites, whereas Mn exhibited a more complex but interesting role. At the early stages of operation, Mn 4+ acts as a stabilizing surface layer that mitigates catalyst degradation but partially blocks Co sites before they undergo gradual leaching. The concurrent incorporation of both Ni and Mn yields a trimetallic 2NMC@NF electrocatalyst that integrates the activity benefits of Ni with the stability conferred by Mn, achieving 92.9% benzyl alcohol conversion and 91.4% Faradaic efficiency after 24 h at 1.5 V vs RHE. These findings elucidate how trace Ni and Mn impurities, often introduced from electrolytes or external sources, can modulate the lattice and electronic structure of CoOOH, offering a design strategy for enhancing both activity and long-term stability in electrocatalytic organic oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Pathway to Complete Energy Sector Decarbonization with Available Iridium Resources using Ultralow Loaded Water Electrolyzers

We present ultralow Ir-loaded (ULL) proton exchange membrane water electrolyzer (PEMWE) cells that can produce enough hydrogen to largely decarbonize the global natural gas, transportation, and electrical storage sectors by 2050, using only half of the annual global Ir production for PEMWE deployment. This represents a significant improvement in PEMWE's global potential, enabled by careful control of the anode catalyst layer (CL), including its mesostructure and catalyst dispersion. Using commercially relevant membranes (Nafion 117), cell materials, electrocatalysts, and fabrication techniques, we achieve at peak a 250× improvement in Ir mass activity over commercial PEMWEs. An optimal Ir loading of 0.011 mg Ir cm -2 operated at an Ir-specific power of ~100 MW kg Ir -1 at a cell potential of ~1.66 V versus RHE (85% higher heating value efficiency). Here, we further evaluate the performance limitations within the ULL regime and offer new insights and guidance in CL design relevant to the broader energy conversion field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Tandem Electrocatalytic CO 2 Reduction with Efficient Intermediate Conversion over Pyramid-Textured Cu–Ag Catalysts

If combined with renewably generated electricity, electrochemical CO 2 reduction (E-CO 2 R) could be used as a sustainable source of chemicals and fuels. Tandem catalysis approaches are attractive for providing the product selectivity, which would be required for commercial applications. Here, we demonstrate a two-step tandem electrocatalytic E-CO 2 R with efficient conversion of the intermediate species. The catalyst scaffold is Si(100), which is etched to form a textured surface consisting of micron-sized pyramid structures with the {111} facets. Two metals are used in the electrocatalytic cascade: Ag is employed to perform a two-electron reduction of CO 2 to the intermediate CO, and Cu performs conversion to more reduced products. Using high-angle physical vapor deposition, we form separated, micron-scale areas of the two electrocatalysts on opposite sides of the pyramids, with their relative surface coverages being tunable with the deposition angle. Compared to the textured scaffolds with blanket Ag and Cu used as controls, bimetallic pyramid tandem catalysts have higher current densities and much lower faradic efficiencies (FE) for CO. These effects are due to efficient conversion of the CO formed on Ag to more reduced products on Cu. Methane is the main product to be enhanced by the cascade pathway: a bimetallic catalyst with approximately equal coverages of Ag and Cu produces methane with a FE of 62% at -1.1 V RHE , corresponding to a partial current density of 12.7 mA cm -2 . We estimate an intermediate conversion yield for the CO intermediate of 80-90%, which is close to the mass-transport limited value predicted by reaction-diffusion simulations.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Cu[Ni(2,3-pyrazinedithiolate) 2 ] Metal–Organic Framework for Electrocatalytic Hydrogen Evolution

The application of metal–organic frameworks (MOFs) as electrocatalysts for small molecule activation has been an emerging topic of research. Previous studies have suggested that two-dimensional (2D) dithiolene-based MOFs are among the most active for the hydrogen evolution reaction (HER). Here, a three-dimensional (3D) dithiolene-based MOF, Cu[Ni(2,3-pyrazinedithiolate) 2 ] (1), is evaluated as an electrocatalyst for the HER. In pH 1.3 aqueous electrolyte solution, 1 exhibits a catalytic onset at –0.43 V vs the reversible hydrogen electrode (RHE), an overpotential (η 10 mA/cm 2 ) of 0.53 V to reach a current density of 10 mA/cm 2 , and a Tafel slope of 69.0 mV/dec. Interestingly, under controlled potential electrolysis, 1 undergoes an activation process that results in a more active catalyst with a 200 mV reduction in the catalytic onset and η 10 mA/cm 2 . It is proposed that the activation process is a result of the cleavage of Cu–N bonds in the presence of protons and electrons. Furthermore, this hypothesis is supported by various experimental studies and density functional theory calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Recreating Fuel Cell Catalyst Degradation in Aqueous Environments for Identical-Location Scanning Transmission Electron Microscopy Studies

The recent surge in interest of proton exchange membrane fuel cells (PEMFCs) for heavy-duty vehicles increases the demand on the durability of oxygen reduction reaction electrocatalysts used in the fuel cell cathode. This prioritizes efforts aimed at understanding and subsequently controlling catalyst degradation. Identical-location scanning transmission electron microscopy (IL-STEM) is a powerful method that enables precise characterization of degradation processes in individual catalyst nanoparticles across various stages of cycling. Recreating the degradation processes that occur in PEMFC membrane electrode assemblies (MEAs) within the aqueous cell used for IL-STEM experiments is vital for generating an accurate understanding of these processes. In this work, we investigate the type and degree of catalyst degradation achieved by cycling in an aqueous cell compared to a PEMFC MEA. While significant degradation is observed in IL-STEM experiments performed on a traditional Pt catalyst using the standard accelerated stress test potential window (0.6-0.95 VRHE), degradation of a PtCo catalyst designed for heavy-duty vehicle use is very limited compared to that observed in MEAs. We therefore explore various experimental parameters such as temperature, acid type, acid concentration, ionomer content, and potential window to identify conditions that reproduce the degradation observed in MEAs. We find that by extending the cycling potential window to 0.4-1.0 V RHE in an electrolyte containing Pt ions, the degraded particle size distribution and alloy composition better match that observed in MEAs. In particular, these conditions increase the relative contribution of Ostwald ripening, which appears to play a more significant role in the degradation of larger alloy particles supported on high-surface-area carbons than coalescence. Results from this work highlight the potential for discrepancies between ex situ aqueous experiments and MEA tests. While different catalysts may require a unique modification to the AST protocol, strategies provided in this work enable future in situ and identical-location experiments that will play an important role in the development of robust catalysts for heavy-duty vehicle applications.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2022

Failure Modes of Platinized pn+-GaInP Photocathodes for Solar-Driven H2 Evolution

The long-term stability for the hydrogen-evolution reaction (HER) of homojunction pn+-Ga0.52In0.48P photocathodes (band gap = 1.8 eV) with an electrodeposited Pt catalyst (pn+-GaInP/Pt) has been systematically evaluated in both acidic and alkaline electrolytes. Electrode dissolution during chronoamperometry was correlated with changes over time in the current density-potential (J-E) behavior to reveal the underlying failure mechanism. Pristine pn+-GaInP/Pt photocathodes yielded an open-circuit photopotential (Eoc) as positive as >1.0 V vs the potential of the reversible hydrogen electrode (RHE) and a light-limited current density (Jph) of >12 mA cm-2 (1-sun illumination). However, Eoc and Jph gradually degraded at either pH 0 or pH 14. The performance degradation was attributed to three different failure modes: (1) gradual thinning of the n+-emitter layer due to GaInP dissolution in acid; (2) active corrosion of the underlying GaAs substrate at positive potentials causing delamination of the upper GaInP epilayers; and (3) direct GaAs/electrolyte contact compromising the operational stability of the device. This work reveals the importance of both substrate stability and structural integrity of integrated photoelectrodes toward stable solar fuel generation.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS,S↗
DOE OSTI2022

Operando X-ray Absorption Spectroscopy Study of SnO 2 Nanoparticles for Electrochemical Reduction of CO 2 to Formate

Tin–based electrocatalysts exhibit a remarkable ability to catalyze CO 2 to formate selectively. Understanding the size-property relationships and exploring the evolutions of active size still lack complete understanding. Herein, we prepared SnO 2 nanoparticles (NPs) with controllable size supported on commercial carbon spheres (SnO 2 /C–n, n=1,2,3) by a simple low-temperature annealing method. The transmission electron microscopy(TEM)/scanning transmission electron microscope (STEM) images and fitting results of the small angle X-ray scattering (SAXS) profile confirm the increased size of SnO 2 NPs as the increase of SnO 2 loading. The catalytic performance of SnO 2 has proved the size-dependent effect during CO 2 reduction reaction process. The as-prepared SnO 2 /C–1 displayed the maximum Faradic efficiency of formate (FE HCOO– ) of 82.7% at –1.0 V vs. RHE. In contrast, SnO 2 /C–2 and SnO 2 /C–3 with larger particle sizes achieved lower maximum FE HCOO– and larger overpotential. Moreover, we employed operando XAS to study the evolution of the oxidation state and local coordination environment of SnO 2 under working conditions. In addition to the observed the shifts of rising edge of Sn K-edge X-ray absorption near edge structure (XANES) spectra to lower energy side as the applied voltage decreases, the decreased coordination number of Sn in the Sn-O scattering path and the presence of Sn mental contribution in extended X-ray absorption fine structure (EXAFS) spectra verify the reduction of SnO 2 to SnO x and metallic Sn.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Stability of Mn-Doped TiO 2 Thin-Film Anodes during Water Oxidation Reactions

Incorporating manganese atoms into TiO 2 has been shown to improve its activity for water oxidation. However, its activity has been observed to steadily degrade under constant applied potential, especially at more oxidizing applied potentials. Here, the compositional profile and electrochemical stability of Mn-doped TiO 2 (Mn:TiO 2 ) thin-film electrodes precisely fabricated by atomic layer deposition (ALD) were evaluated to elucidate the mechanisms of electrode degradation. Although ALD enables the deposition of Mn dopants throughout the film thickness, only Mn within 1.5 nm of the surface was observed to be redox active. Annealing Mn:TiO 2 films in air leads to the diffusion of Mn toward the electrode surface and oxidation of the Mn and alters the redox behavior. Annealing endows greater stability to Mn redox behavior but does not fully stabilize the water oxidation current, suggesting that the two electrochemical processes are not precisely correlated. In situ inductively coupled plasma mass spectrometry reveals that Mn is lost from Mn:TiO 2 films at potentials greater than 1.8 V vs RHE. However, the initial Mn loss is equivalent to less than a single ALD layer of MnO x . Longer-term constant potential experiments suggest that Mn is lost from up to 1 nm of the electrode surface but that this loss may account for only a portion of the diminished water oxidation activity.

atomic layer deposition↗