Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RE LIGHT PROCESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Fabrication of Microshutter Arrays for James Webb Space Telescope

Two-dimensional MEMS microshutter arrays are being developed at NASA Goddard Space Flight Center for use in the near-infrared region on the Next Generation Space Telescope (NGST). The microshutter arrays are designed for the selective transmission of light with high efficiency and high contrast. The NGST environment requires cryogenic operation at 45K. Microshutter arrays are fabricated out of silicon-oxide-insulated (SOI) silicon wafers. Arrays are close-packed silicon nitride membranes with a pixel size of 100x100 microns. Individual shutters are patterned with a torsion flexure permitting shutters to open 90 degrees with a minimized mechanical stress concentration. The mechanical shutter arrays are fabricated using MEMS technologies. The processing includes a multi-layer metal deposition and patterning of shutter electrodes and magnetic pads, reactive ion etching (RE) of the front side to form shutters out of the nitride membrane, an anisotropic back-etch for wafer thinning, followed by a deep RIE (DRIE) back-etch down to the nitride shutter membrane to form frames and relieve shutters from the silicon substrate. An additional metal deposition and patterning is used to form back electrodes. Shutters are actuated using a magnetic force and latched using an electrostatic force.

Li, Mary J.↗

Tandem and Bimetallic Catalysts for Oxidative Dehydrogenation of Light Hydrocarbons with Renewable Feedstock

One of the grand challenges for national energy security is the establishment of sustainable chemical transformations. The chemical industry relies on naphtha feedstock from nonrenewable crude oil, and uses energy intense processes to make useful building block molecules such as ethylene through steam cracking, which generates significant greenhouse carbon dioxide emissions. Sustainable chemistry through selective catalysis should enable chemical transformations that use renewable feedstock such as nonfood biomass, minimize energy consumption, and do not emit greenhouse gases or other waste byproducts. In this research, we studied fundamental chemistry that couples the removal of oxygen atoms from nonfood biomass derived polyols and diols with oxidative dehydrogenation (ODH) of petroleum based alcohols. Heterobimetallic Re-Ir complexes were constructed and their reaction chemistry established. Typical substrates are glycerol, sugar alcohols and pentane to produce allyl alcohol, pentene, and water. The reaction mechanism of a recyclable rhenium nano-particle catalyst was established for deoxydehydration of sugar alcohols without the use of organic solvents.

09 BIOMASS FUELS↗

A Physicochemical Method for Separating Rare Earths: Addressing an Impending Shortfall

There are currently zero operating suppliers of critical rare earth elements La–Lu, Sc, Y (REs), in the western hemisphere. REs are critical materials due to their importance in clean energy and defense applications, including permanent magnets in wind turbines and phosphors in energy efficient lighting. It is not economically viable to produce pure REs in the U.S. given current separations technology. REs production is dominated by suppliers in the People’s Republic of China (PRC) because of their capacity in liquid­liquid solvent extraction (SX) used to purify mixtures. Weak environmental regulations in the PRC also contribute to a competitive advantage. SX is a cost, time, solvent and waste intensive process but is highly optimized and scalable. The low efficiency of SX derives from the small thermodynamic differences in solvation enthalpy between the RE3+ cations. To foster stable domestic RE production there is a critical need for fundamentally new REs chemistry that contributes to disruptive technologies in RE separations. The overall goal of this project was to develop new thermodynamic bases, and apply them, for the solution separation of rare earth metals. We have developed the chemistry of rare earth metals: La–Lu, Sc and Y, with redox active ligands. Our hypothesis for the project was that electron­hole coupling in complexes of certain lanthanide metals with redox active ligands can be used to manifest chemical distinctiveness and affect separations. We also developed separations based on unique solution equilibria from tailored ligands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental investigation of internal two-phase flow structures and dynamics of quasi-stable sheet cavitation by fast synchrotron x-ray imaging

The quasi-stable sheet cavitation produced in a small Venturi channel is investigated using a fast synchrotron X-ray imaging technique aided with conventional high speed photography. The use of X-rays instead of visible light solves cavitation opacity related issues, and X-ray phase contrast-based edge enhancement enables high-definition visualization of the internal two-phase morphology. The simultaneous acquisition of time-resolved velocity and void fraction fields through post-processing the recorded X-ray images reveals, for the first time, the complex diphasic flow structures inside the sheet cavity, which is essentially divided into 6 characteristic parts. Distinct from the current mainstream view, the globallysteady sheet cavitation is found to be characterized by a weak but constantly-existing re-entrant flow that can penetrate the entire cavity. The turbulent velocity fluctuations inside the sheet cavity are also investigated. The turbulence level in the reverse flow region is observed to be as low as in the outer main flow demonstrating the relatively steady status of the reentrant flow. Unlike the streamwise and cross-stream fluctuations, the shear stress appears to be weakly correlated with the velocity gradient. The collapse of vapor phase and the vaporization at the upstream cavity interface are found to be the primary causes of shear stress intensification.

42 ENGINEERING↗

Algorithm Science to Operations for the National Polar-orbiting Operational Environmental Satellite System (NPOESS) Visible/Infrared Imager/Radiometer Suite (VIIRS)

The VIIRS sensor provides measurements for 22 Environmental Data Records (EDRs) addressing the atmosphere, ocean surface temperature, ocean color, land parameters, aerosols, imaging for clouds and ice, and more. That is, the VIIRS collects visible and infrared radiometric data of the Earth's atmosphere, ocean, and land surfaces. Data types include atmospheric, clouds, Earth radiation budget, land/water and sea surface temperature, ocean color, and low light imagery. This wide scope of measurements calls for the preparation of a multiplicity of Algorithm Theoretical Basis Documents (ATBDs), and, additionally, for intermediate products such as cloud mask, et al. Furthermore, the VIIRS interacts with three or more other sensors. This paper addresses selected and crucial elements of the process being used to convert and test an immense volume of a maturing and changing science code to the initial operational source code in preparation for launch of NPP. The integrity of the original science code is maintained and enhanced via baseline comparisons when re-hosted, in addition to multiple planned code performance reviews.

NPOESS (NATIONAL POLAR-ORBITING OPERATIONAL ENVIRO↗

A hydride reorientation model for irradiated zirconium alloy cladding

This paper presents a hydride reorientation model for irradiated, but de-fueled, zirconium-based alloy cladding tubes for water cooled reactors subjected to temperature and stress conditions of interest to storage of commercial spent nuclear fuel under dry, inert conditions. The present development builds upon and updates an existing hydride precipitation model developed in 2003, and was motivated by recent findings that the old model underestimated the amount of radial hydrides for applied hoop stresses below 100 MPa. The data used to support the development of the new model were obtained from an NFIR-sponsored experimental program on de-fueled cladding tubes irradiated in light-water reactors. The irradiated material consisted of three types of zirconium-based alloys sampled from high burnup fuel rods: cold-worked stress-relieved (CWSR) Zircaloy-4 (Zr-4), CWSR Zirlo{sup TM}, and recrystallized annealed (RXA) Zircaloy-2 (Zr-2). The majority of the hydride re-orientation tests for the irradiated cladding specimens were conducted under constant pressure with a mean cooling rate of about 1 Celsius degree/mn. The remaining tests were conducted at slower cooling rates with the pressure being kept proportional to the temperature change during the cooling process to simulate dry storage conditions. The parameters of the hydride re-orientation model were fitted to the test data. Fitting parameters were determined for (CWSR) Zircaloy-4 (Zr-4) and CWSR Zirlo{sup TM} respectively. The cooling rate effect was empirically accounted for in the model. General good agreement between model prediction and measured radial hydride content is achieved, with a standard error less than 12 ppm. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Widespread inhibition of daytime ecosystem respiration

The global land surface absorbs about a third of anthropogenic emissions each year, due to the difference between two key processes: ecosystem photosynthesis and respiration. Despite the importance of these two processes, it is not possible to measure either at the ecosystem scale during the daytime. Eddy-covariance measurements are widely used as the closest 'quasi-direct' ecosystem-scale observation from which to estimate ecosystem photosynthesis and respiration. Recent research, however, suggests that current estimates may be biased by up to 25%, due to a previously unaccounted for process: the inhibition of leaf respiration in the light. Yet the extent of inhibition remains debated, and implications for estimates of ecosystem-scale respiration and photosynthesis remain unquantified. Here, we quantify an apparent inhibition of daytime ecosystem respiration across the global FLUXNET eddy-covariance network and identify a pervasive influence that varies by season and ecosystem type. We develop partitioning methods that can detect an apparent ecosystem-scale inhibition of daytime respiration and find that diurnal patterns of ecosystem respiration might be markedly different than previously thought. The results call for the re-evaluation of global terrestrial carbon cycle models and also suggest that current global estimates of photosynthesis and respiration may be biased, some on the order of magnitude of anthropogenic fossil fuel emissions.

54 ENVIRONMENTAL SCIENCES↗

Image computing techniques to extrapolate data for dust tracking in case of an experimental accident simulation in a nuclear fusion plant

In this paper, a preliminary shadowgraph-based analysis of dust particles re-suspension due to loss of vacuum accident (LOVA) in ITER-like nuclear fusion reactors has been presented. Dust particles are produced through different mechanisms in nuclear fusion devices, one of the main issues is that dust particles are capable of being re-suspended in case of events such as LOVA. Shadowgraph is based on an expanded collimated beam of light emitted by a laser or a lamp that emits light transversely compared to the flow field direction. In the STARDUST facility, the dust moves in the flow, and it causes variations of refractive index that can be detected by using a CCD camera. The STARDUST fast camera setup allows to detect and to track dust particles moving in the vessel and then to obtain information about the velocity field of dust mobilized. In particular, the acquired images are processed such that per each frame the moving dust particles are detected by applying a background subtraction technique based on the mixture of Gaussian algorithm. The obtained foreground masks are eventually filtered with morphological operations. Finally, a multi-object tracking algorithm is used to track the detected particles along the experiment. For each particle, a Kalman filter-based tracker is applied; the particles dynamic is described by taking into account position, velocity, and acceleration as state variable. The results demonstrate that it is possible to obtain dust particles’ velocity field during LOVA by automatically processing the data obtained with the shadowgraph approach.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Superlattice photonic crystal as broadband solar absorber for high temperature operation

Here, a high performance solar absorber using a 2D tantalum superlattice photonic crystal (PhC) is proposed and its design is optimized for high-temperature energy conversion. In contrast to the simple lattice PhC, which is limited by diffraction in the short wavelength range, the superlattice PhC achieves solar absorption over broadband spectral range due to the contribution from two superposed lattices with different cavity radii. The superlattice PhC geometry is tailored to achieve maximum thermal transfer efficiency for a low concentration system of 250 suns at 1500 K reaching 85.0% solar absorptivity. In the high concentration case of 1000 suns, the superlattice PhC absorber achieves a solar absorptivity of 96.2% and a thermal transfer efficiency of 82.9% at 1500 K, amounting to an improvement of 10% and 5%, respectively, versus the simple square lattice PhC absorber. In addition, the performance of the superlattice PhC absorber is studied in a solar thermophotovoltaic system which is optimized to minimize absorber re-emission by reducing the absorber-to-emitter area ratio and using a highly reflective silver aperture.

14 SOLAR ENERGY↗

EMITTING ELECTRONS SPECTRA AND ACCELERATION PROCESSES IN THE JET OF Mrk 421: FROM THE LOW STATE TO THE GIANT FLARE STATE

We investigate the electron energy distributions (EEDs) and the acceleration processes in the jet of Mrk 421 through fitting the spectral energy distributions (SEDs) in different active states in the frame of a one-zone synchrotron self-Compton model. After assuming two possible EEDs formed in different acceleration models: the shock-accelerated power law with exponential cut-off (PLC) EED and the stochastic-turbulence-accelerated log-parabolic (LP) EED, we fit the observed SEDs of Mrk 421 in both low and giant flare states using the Markov Chain Monte Carlo method which constrains the model parameters in a more efficient way. The results from our calculations indicate that (1) the PLC and LP models give comparably good fits for the SED in the low state, but the variations of model parameters from low state to flaring can be reasonably explained only in the case of the PLC in the low state; and (2) the LP model gives better fits compared to the PLC model for the SED in the flare state, and the intra-day/night variability observed at GeV-TeV bands can be accommodated only in the LP model. The giant flare may be attributed to the stochastic turbulence re-acceleration of the shock-accelerated electrons in the low state. Therefore, we may conclude that shock acceleration is dominant in the low state, while stochastic turbulence acceleration is dominant in the flare state. Moreover, our result shows that the extrapolated TeV spectra from the best-fit SEDs from optical through GeV with the two EEDs are different. It should be considered with caution when such extrapolated TeV spectra are used to constrain extragalactic background light models.

79 ASTRONOMY AND ASTROPHYSICS↗

Cutting More than Metal: Breaking the Development Cycle

New technology is changing the way we do business at NASA. The ability to use these new tools is made possible by a learning culture able to embrace innovation, flexibility, and prudent risk tolerance, while retaining the hard-won lessons learned of other successes and failures. Technologies such as 3-D manufacturing and structured light scanning are re-shaping the entire product life cycle, from design and analysis, through production, verification, logistics and operations. New fabrication techniques, verification techniques, integrated analysis, and models that follow the hardware from initial concept through operation are reducing the cost and time of building space hardware. Using these technologies to be more efficient, reliable and affordable requires we bring them to a level safe for NASA systems, maintain appropriate rigor in testing and acceptance, and transition new technology. Maximizing these technologies also requires cultural acceptance and understanding and balancing rules with creativity. Evolved systems engineering processes at NASA are increasingly more flexible than they have been in the past, enabling the implementation of new techniques and approaches. This paper provides an overview of NASA Marshall Space Flight Center's new approach to development, as well as examples of how that approach has been incorporated into NASA's Space Launch System (SLS) Program, which counts among its key tenants - safety, affordability, and sustainability. One of the 3D technologies that will be discussed in this paper is the design and testing of various rocket engine components.

Singer, Chris↗

Re-evaluation of Waste Isolation Pilot Plant's Passive Institutional Controls Program - Status - 17116

The United States government set forth in 40CFR194.43 requirements for 'Passive Institutional Controls' for nuclear waste repositories. This regulation stated compliance applications for a repository 'shall include detailed descriptions of the measures that will be employed to preserve knowledge about the location, design and contents of the disposal system.' In the early 1990's the U.S. Department of Energy developed and proposed in the Compliance Certification Application of 1996 a robust and complex technical and engineering Passive Institutional Controls Program including such things as records management, large surface markers, salt berms, buried and above-ground information rooms and small subsurface markers/plaques. The Waste Isolation Pilot Plant Passive Institutional Control program meets the regulatory requirements and is certified by the U.S. Environmental Protection Agency. Presently this program is being re-evaluated in light of the Nuclear Energy Agency's, Records Knowledge and Memory initiative, shrinking government budgets, and the ethical/moral considerations of risks versus expenditures. This paper will discuss progress made to date in re-evaluating the Waste Isolation Pilot Plant Passive Institutional Controls program and expected plans for the future. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Dissolution of the rare-earth mineral bastnaesite by acidic amide ionic liquid for recovery of critical

Rare-earth elements provide the cornerstones to clean sustainable energy and modern technologies such as computers, communications, and transportation. As such, the recovery of rare earths (REs) from minerals such as bastnaesite remains important for modern times. As the light lanthanides (La–Nd) constitute the majority (typically > 98.7 %) of the REs in bastnaesite with the heavy REs (Sm–Lu) contributing the remainder (approximately 1.3 %), an enrichment of heavier REs may serve as an effective means of assisting rare-earth recovery. Such an extractive metallurgy process involving ionic liquids (ILs) leads to an enrichment of heavy REs by nearly an order of magnitude. The acidic IL N,N-dimethylacetamidium bis(trifluoromethylsulfonyl)imide (DMAH+NTf 2 – ) in the IL 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMIM + NTf 2 – ) dissolves froth flotation bastnaesite, synthetic bastnaesite analogues (RECO 3 F), RE 2 O 3 , and RE 2 (CO 3 ) 3 minerals. Furthermore, an overall reaction for the dissolution of bastnaesite is proposed for this IL system. This IL system may provide the initial stages of a greater RE separation scheme for bastnaesite froth flotation concentrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Semi-artificial Photosynthetic CO 2 Reduction through Purple Membrane Re-engineering with Semiconductor

The engineering of biological pathways with man-made materials provides inspiring blueprints for sustainable fuel production. Here, we leverage a top-down cellular engineering strategy to develop a new semi artificial photosynthetic paradigm for carbon dioxide reduction via enveloping Halobacterium purple membrane-derived vesicles over Pd-deposited hollow porous TiO 2 nanoparticles. In this biohybrid, the membrane protein, bacteriorhodopsin, not only retains its native biological function of pumping protons but also acts as a photosensitizer that injects light-excited electrons into the conduction band of TiO 2 . As such, the electrons trapped on Pd cocatalysts and the protons accumulated inside the cytomimetic architecture act in concert to reduce CO 2 via proton-coupled multielectron transfer processes. This study suggests an alternative toolkit for developing robust semi-artificial photosynthetic systems for solar energy conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PRIMORDIAL r-PROCESS DISPERSION IN METAL-POOR GLOBULAR CLUSTERS

Heavy elements, those produced by neutron-capture reactions, have traditionally shown no star-to-star dispersion in all but a handful of metal-poor globular clusters (GCs). Recent detections of low [Pb/Eu] ratios or upper limits in several metal-poor GCs indicate that the heavy elements in these GCs were produced exclusively by an r-process. Re-examining GC heavy element abundances from the literature, we find unmistakable correlations between the [La/Fe] and [Eu/Fe] ratios in four metal-poor GCs (M5, M15, M92, and NGC 3201), only two of which were known previously. This indicates that the total r-process abundances vary from star to star (by factors of 2-6) relative to Fe within each GC. We also identify potential dispersion in two other GCs (M3 and M13). Several GCs (M12, M80, and NGC 6752) show no evidence of r-process dispersion. The r-process dispersion is not correlated with the well-known light element dispersion, indicating that it was present in the gas throughout the duration of star formation. The observations available at present suggest that star-to-star r-process dispersion within metal-poor GCs may be a common but not ubiquitous phenomenon that is neither predicted by nor accounted for in current models of GC formation and evolution.

79 ASTRONOMY AND ASTROPHYSICS↗

First‐Principles Calculations of Quantum Efficiency for Point Defects in Semiconductors: The Example of Yellow Luminance by GaN: C N +O N and GaN:C N

Abstract Point defects play an important role in the photoelectrical properties of semiconductor materials, and they can be luminescence centers. However, the relationships among the observed luminescence wavelengths, intensities, and the microscopic processes are in most cases unknown, or depend heavily on parameter fitting. In this work, the light‐emitting quantum efficiencies for point defects using ab initio density functional theory are calculated. The study of radiation recombination for electrons and nonradiation recombination for holes is reported here. The results show that the defect C N transition between “−” and “0” charged levels and the defect C N +O N transition between “0” and “+” charged levels both may be responsible for the yellow luminescence (YL) which is observed in experiment. Moreover, the calculation shows significant thermal quenching of the YL starting at 480 K due to re‐excitation of hole into the valence band from the point defects, which is in relatively good agreement with the experimentally observed value. This work shows that it is possible to use ab initio calculations to understand the microscopic mechanisms and the competitions among different channels for the light emissions caused by defects.

Zhang, Hai‐Shan↗

Crystal Structure of the C-terminal Domain of Human eIF2D and Its Implications on Eukaryotic Translation Initiation

Protein synthesis is a key process in all living organisms. In eukaryotes, initiation factor 2 (eIF2) plays an important role in translation initiation as it selects and delivers the initiator tRNA to the small ribosomal subunit. Under stress conditions, phosphorylation of the α-subunit of eIF2 downregulates cellular protein synthesis. However, translation of certain mRNAs continues via the eIF2D-dependent non-canonical initiation pathway. The molecular mechanism of this process remains elusive. In addition, eIF2D plays a role in translation re-initiation and ribosome recycling. Currently, there has been no structural information of eIF2D. We have now determined the crystal structure of the C-terminal domains of eIF2D at 1.4-Å resolution. One domain has the fold similar to that of eIF1, which is crucial for the scanning and initiation codon selection. The second domain has a known SWIB/MDM2 fold, which was not observed before in other translation initiation factors. Our structure reveals atomic details of inter-domain interactions in the C-terminal part of eIF2D and sheds light on the possible role of these domains in eIF2D during translation.

59 BASIC BIOLOGICAL SCIENCES↗

Crystal development during carbonation of lime-based mortars in different environmental conditions

Highlights: • High CO{sub 2} and DiloCarb® treatment favour advanced carbonation and self-healing. • In the lime mortar without ceramics, channel type pores occur in the aggregate border. • In the lime mortars with ceramics, vug type pores are produced in the binder during kneading. • The formation of tabular CaCO{sub 3} polymorphs caused an increase in stress leading to microshrinkage cracks. • The use of a ceramic provoked dissolution and then re-precipitation of more stable polymorphs. - Abstract: This study examines crystal development during the carbonation of lime mortars according to the additives used and curing conditions. Two types of samples were prepared, one with sand and the other one additionally including Roman ceramics. These mortars were cured: 1) by spraying with a carbonation accelerator product under laboratory conditions; 2) in a climate chamber under 20 °C, 60% relative humidity, and 1600 ppm CO{sub 2}; and 3) under laboratory conditions as controls. Polarized light microscopy, SEM-EDS and XRD were used at 28, 90, 120 and 180 days to monitor the carbonation process. Observations indicate the development of different CaCO{sub 3} polymorphs, which appeared as metastable phases. The early nucleation of a well-defined calcite phase as the most stable CaCO{sub 3} polymorph was only identified in the chamber-cured samples. Differences in the pore network were observed depending on the composition and morphology of the mortar components and the environmental curing conditions.

36 MATERIALS SCIENCE↗