Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RADICAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Measurement of D* mesons in jets from p+p collisions at {radical}(s)=200 GeV

We report the measurement of charged D* mesons in inclusive jets produced in proton-proton collisions at a center-of-mass energy {radical}(s)=200 GeV with the STAR experiment at the Relativistic Heavy Ion Collider. For D* mesons with fractional momenta 0.2<z<0.5 in inclusive jets with 11.5 GeV mean transverse energy, the production rate is found to be N(D*{sup +}+D*{sup -})/N(jet)=0.015{+-}0.008(stat){+-}0.007(sys). This rate is consistent with perturbative QCD evaluation of gluon splitting into a pair of charm quarks and subsequent hadronization.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Longitudinal spin transfer to {lambda} and {lambda} hyperons in polarized proton-proton collisions at {radical}(s)=200 GeV

The longitudinal spin transfer, D{sub LL}, from high energy polarized protons to {lambda} and {lambda} hyperons has been measured for the first time in proton-proton collisions at {radical}(s)=200 GeV with the STAR detector at the Relativistic Heavy Ion Collider. The measurements cover pseudorapidity, {eta}, in the range |{eta}|<1.2 and transverse momenta, p{sub T}, up to 4 GeV/c. The longitudinal spin transfer is found to be D{sub LL}=-0.03{+-}0.13(stat){+-}0.04(syst) for inclusive {lambda} and D{sub LL}=-0.12{+-}0.08(stat){+-}0.03(syst) for inclusive {lambda} hyperons with <{eta}>=0.5 and <p{sub T}>=3.7 GeV/c. The dependence on {eta} and p{sub T} is presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Computational Data Associated with the publication: Formation of a Decanuclear Organometallic Dysprosium Complex via a Radical–Radical Cross–Coupling Reaction

Over the years, polynuclear cyclic or torus complexes have attracted increasing interest due to their unique metal topologies and properties. However, the isolation of polynuclear cyclic organometallic complexes is extremely challenging due to their inherent reactivity, which stems from the labile and reactive metal‐carbon bonds. In this study, the pyrazine ligand undergoes a radical‐radical cross‐coupling reaction leading to the formation of a decanuclear [(Cp*)20Dy10(L1)10] ⋅ 12(C7H8) (1; where L1 = anion of 2‐prop‐2‐enyl‐2H‐pyrazine; Cp* = pentamethylcyclopentadienyl) complex, where all DyIII metal centres are bridged by the anionic L1 ligand. Amongst the family of polynuclear Ln organometallic complexes bearing CpR2Lnx units (CpR = substituted cyclopentadienyl), 1 features the highest nuclearity obtained to date. In‐depth computational studies were conducted to elucidate the proposed reaction mechanism and formation of L1, while probing of the magnetic properties of 1, revealed slow magnetic relaxation upon application of a static dc field.

Bajaj, Neha↗

Automated Manufacturing of Grid Stiffened Panels with Radically Reduced Tooling

Grid stiffened continuous fiber reinforced composite panels are an attractive option for creating lightweight structures due to the tailorability for various applications and the resulting high specific properties. However, the panel stiffeners and stiffener intersections result in high tooling complexity and correspondingly high cost of implementation. These factors have limited the impact of such structures in the composites industry. Previous research has demonstrated the ability to produce high quality, high aspect ratio beams, representative of individual grid stiffeners, using E-glass/PET comingled tow via direct digital manufacturing. Further, prior preliminary efforts have demonstrated the potential to use the same approach to manufacture grid intersections that have continuous fiber in both directions. To expand on the previous efforts in grid stiffeners produced by direct digital manufacture with radically reduced tooling requirements, this effort compares two methods of providing positioning and consolidation, nozzle vs. roller. Both processes are based on a commingled yarn feedstock. The extrusion through a nozzle has been shown to enable grid intersection control through local variations in applied consolidation and serves as the baseline process. However, this approach requires a continuous placement path to create the complete grid stiffened panel as no mechanism for cutting and restarting has been implemented. Alternatively, a newly developed placement head incorporating cut and refeed, mounted to a 6-axis robot, offers the potential of improved path placement efficiency. The two techniques are used to produce similar grid composite stiffeners to evaluate the effectiveness of producing the grid intersections. Rate of deposition of the two end effectors are compared and the quality of the associated grid stiffeners, and intersections, are determined through measurement of geometry, fiber volume fraction and void fraction.

Engineering↗

Radical–radical reactions, pyrene nucleation, and incipient soot formation in combustion

Here, we present a combined experimental and probabilistic simulation study of soot-precursor. The experiments were conducted using aerosol mass spectrometry coupled with tunable vacuum ultraviolet radiation from the Advanced Light Source at Lawrence Berkeley National Laboratory. Mass spectra and photoionization efficiency (PIE) curves of soot precursor species were measured at different heights in a premixed flat flame and in a counter-flow diffusion flame fueled by ethylene and oxygen. The PIE curves at the pyrene mass from these flames were compared with reference PIE scans recorded for pyrene. The results demonstrate that other C 16 H 10 isomers than pyrene are major components among species condensed onto incipient soot in this study, which is in agreement with the simulations. Species with mass 202 u only have a high prevalence in incipient soot particles drawn from the premixed flame, but hydrocarbon species with sizes in the range 200-400 u are important to incipient-soot formation in both flames. The simulations predict that some species form through combination reactions involving relatively large radicals and bypass traditional molecular-growth pathways through addition of small hydrocarbon species. The experimental results support this prediction; they demonstrate that these species have higher relative abundances in particles formed close to the fuel outlet than smaller, lighter molecular species and indicate that these species are important to early formation of incipient-soot precursors. The results also imply that a leading role in incipient-soot precursor formation is played by species with lower thermal stability than the even-carbon numbered, unsubstituted polycyclic aromatic hydrocarbons known as "stabilomers".

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

“Wine-Dark Sea” in an Organic Flow Battery: Storing Negative Charge in 2,1,3-Benzothiadiazole Radicals Leads to Improved Cyclability

Redox-active organic materials (ROMs) have shown great promise for redox flow battery applications but generally encounter limited cycling efficiency and stability at relevant redox material concentrations in nonaqueous systems. Here we report a new heterocyclic organic anolyte molecule, 2,1,3-benzothiadiazole, that has high solubility, a low redox potential, and fast electrochemical kinetics. Coupling it with a benchmark catholyte ROM, the nonaqueous organic flow battery demonstrated significant improvement in cyclable redox material concentrations and cell efficiencies compared to the state-of-the-art nonaqueous systems. Especially, this system produced exceeding cyclability with relatively stable efficiencies and capacities at high ROM concentrations (>0.5 M), which is ascribed to the highly delocalized charge densities in the radical anions of 2,1,3-benzothiadiazole, leading to good chemical stability. As a result, this material development represents significant progress toward promising next-generation energy storage.

25 ENERGY STORAGE↗

Uranium recovery from seawater: development of fiber adsorbents prepared via atom-transfer radical polymerization

We developed a novel adsorbent preparation method using atom-transfer radical polymerization (ATRP) combined with radiation-induced graft polymerization (RIGP) in order to synthesize an adsorbent for uranium recovery from seawater. Furthermore, the ATRP method allowed a much higher degree of grafting on the adsorbent fibers (595 2818%) than that allowed by RIGP alone. The adsorbents were prepared with varied composition of amidoxime groups and hydrophilic acrylate groups. The successful preparation revealed that both ligand density and hydrophilicity were critical for optimal performance of the adsorbents. Adsorbents synthesized in this study showed a relatively high performance (141 179 mg/g at 49 62 % adsorption) in laboratory screening tests using a uranium concentration of ~6 ppm. This performance is much higher than that of known commercial adsorbents. However, actual seawater experiment showed impeded performance compared to the recently reported high-surface-area-fiber adsorbents, due to slow adsorption kinetics. The impeded performance motivated an investigation of the effect of hydrophilic block addition on the graft chain terminus. The addition of hydrophilic block on the graft chain terminus nearly doubled the uranium adsorption capacity in seawater, from 1.56 mg/g to 3.02 mg/g. Our investigation revealed the importance of polymer chain conformation, in addition to ligand and hydrophilic group ratio, for advanced adsorbent synthesis for uranium recovery from seawater.

07 ISOTOPE AND RADIATION SOURCES↗

Electronic nonadiabatic effects in low temperature radical-radical reactions. I. C({sup 3}P) + OH({sup 2}Π)

The formation of collision complexes, as a first step towards reaction, in collisions between two open-electronic shell radicals is treated within an adiabatic channel approach. Adiabatic channel potentials are constructed on the basis of asymptotic electrostatic, induction, dispersion, and exchange interactions, accounting for spin-orbit coupling within the multitude of electronic states arising from the separated reactants. Suitable coupling schemes (such as rotational + electronic) are designed to secure maximum adiabaticity of the channels. The reaction between C({sup 3}P) and OH({sup 2}Π) is treated as a representative example. The results show that the low temperature association rate coefficients in general cannot be represented by results obtained with a single (generally the lowest) potential energy surface of the adduct, asymptotically reaching the lowest fine-structure states of the reactants, and a factor accounting for the thermal population of the latter states. Instead, the influence of non-Born–Oppenheimer couplings within the multitude of electronic states arising during the encounter markedly increases the capture rates. This effect extends up to temperatures of several hundred K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical oxygen demand (COD) removal from bio-treated coking wastewater by hydroxyl radicals produced from a reduced clay mineral

Removal of chemical oxygen demand (COD) from wastewater has been of considerable interest for several decades, but detailed mechanisms are poorly known. Here we present an environmental friendly method for removing COD from coking wastewater by using chemically reduced nontronite (rNAu-2). Hydroxyl radicals (·OH) produced from oxidation of structural Fe(II) in rNAu-2 in phosphate buffer at pH 6.5, oxidized various compounds in wastewater and thus significantly decreased COD (from 199.10 ± 0.90 to 80.4 ± 1.97 mg/L) within 120 h. The amount of COD removal was positively correlated with the amount of ·OH production, with removal efficiency depending on pH and buffer type. Mass spectrometric analysis of dissolved organic matter (DOM) suggested an oxidative pathway for COD removal. Excitation-emission matrix (EEM) fluorescence spectroscopy showed that aromatic protein-like compounds accounted for a large fraction of DOM in initial wastewater, but after rNAu-2 treatment, their proportion decreased. A sequential treatment of wastewater by rNAu-2 and a common wastewater bacterium Alcaligenes faecalis demonstrated that different orders of chemical and biological treatments affected COD removal efficiency, likely because chemical and microbial treatments targeted different compounds in coking wastewater.

Zhou, Ziqi↗

Extension of structure-reactivity correlations for the hydrogen abstraction reaction to methyl radical and comparison to chlorine atom, bromine atom, and hydroxyl radical

In this study, we presented structure-reactivity correlations for the gas-phase rate constants for hydrogen abstraction from sp3-hybridized carbon by three electrophilic radicals (X • + HCR 3 → XH + • CR 3 ; X = Cl • , HO • , and Br); the reaction enthalpy effect was represented by the independent variable Δ r H and the polar effect by the independent variables F and R, the Hammett-Taft constants for field/inductive and resonance effects. Here we present a parallel treatment for the less electronegative CH 3 • . In spite of a limited and scattered data base, the resulting least-squares fit [log k 437 (CH 3 • ) = 0.0251(Δ r H) + 0.96(ΣF) 0.56(ΣR) – 19.15] was modestly successful and useful for initial predictions. As expected, the polar effect appears to be minor and its directionality, i.e., the philicity of CH 3 , may depend on the nature of the substituents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of Benzene and Naphthalene through Cyclopentadienyl-Mediated Radical–Radical Reactions

Resonantly stabilized free radicals (RSFRs) have been contemplated as fundamental molecular building blocks and reactive intermediates in molecular mass growth processes leading to polycyclic aromatic hydrocarbons (PAHs) and carbonaceous nanoparticles on Earth and in deep space. Here, by combining molecular beams and computational fluid dynamics simulations, we provide compelling evidence on the formation of benzene via the cyclopentadienyl-methyl reaction and of naphthalene through the cyclopentadienyl self-reaction, respectively. These systems offer benchmarks for the conversion of a five-membered ring to the 6π-aromatic (benzene) and the generation of the simplest 10π-PAH (naphthalene) at elevated temperatures. These results uncover molecular mass growth processes from the “bottom up” via RSFRs in high temperature circumstellar environments and combustion systems expanding our fundamental knowledge of the organic, hydrocarbon chemistry in our universe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidation of the para-Tolyl Radical by Molecular Oxygen under Single-Collison Conditions: Formation of the para-Toloxy Radical

Crossed molecular beam experiments were performed to elucidate the chemical dynamics of the para-tolyl (CH 3 C 6 H 4 ) radical reaction with molecular oxygen (O 2 ) at an average collision energy of 35.3 ± 1.4 kJ mol –1 . Combined with theoretical calculations, the results show that para-tolyl is efficiently oxidized by molecular oxygen to para-toloxy (CH 3 C 6 H 4 O) plus ground-state atomic oxygen via a complex forming, overall exoergic reaction (experimental, -33 ± 16 kJ mol –1 ; computational, -42 ± 8 kJ mol –1 ). Finally, the reaction dynamics are analogous to those observed for the phenyl (C 6 H 5 ) plus molecular oxygen system which suggests the methyl group is a spectator during para-tolyl oxidation and that application of phenyl thermochemistry and reaction rates to para-substituted aryls is likely a suitable approximation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoinduced electron transfer from rylenediimide radical anions and dianions to Re(bpy)(CO) 3 using red and near-infrared light

A major goal of artificial photosynthesis research is photosensitizing highly reducing metal centers using as much as possible of the solar spectrum reaching Earth's surface. The radical anions and dianions of rylenediimide (RDI) dyes, which absorb at wavelengths as long as 950 nm, are powerful photoreductants with excited state oxidation potentials that rival or exceed those of organometallic chromophores. These dyes have been previously incorporated into all-organic donor–acceptor systems, but have not yet been shown to reduce organometallic centers. This study describes a set of dyads in which perylenediimide (PDI) or naphthalenediimide (NDI) chromophores are attached to Re(bpy)(CO) 3 through either the bipyridine ligand or more directly to the Re center via a pyridine ligand. The chromophores are reduced with a mild reducing agent, after which excitation with long-wavelength red or near-infrared light leads to reduction of the Re complex. The kinetics of electron transfer from the photoexcited anions to the Re complex are monitored using transient visible/near-IR and mid-IR spectroscopy, complemented by theoretical spectroscopic assignments. The photo-driven charge shift from the reduced PDI or NDI to the complex occurs in picoseconds regardless of whether PDI or NDI is attached to the bipyridine or to the Re center, but back electron transfer is found to be three orders of magnitude slower with the chromophore attached to the Re center. These results will inform the design of future catalytic systems that incorporate RDI anions as chromophores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗