SEARCH · Engineering Papers
Results for “RADAR ALTIMETER”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Equipment specification for a space rated radar altimeter Final technical report
Equipment specifications for GEOS C mission altimeters
The Skylab radar altimeter
A summary of the significant hardware characteristics of the S-193 altimeter experiment portion of the 1973 Skylab Mission is presented. A detailed discussion of the altimetry, oceanographic, and instrumentation technology objectives are presented along with a discussion of the major experiments associated with these objectives.
GEOS-C radar altimeter characteristics
The purpose of the GEOS-C mission and the operating characteristics of its special K-band altimeter are outlined. Special attention was given to the possible use of height measurements and other supporting GEOS-C data to evaluate the feasibility and value of altimetry on a global basis.
Development of mathematical models for processing S-193 radar altimeter data
There are no author-identified significant results in this report.
Integration of the multispectral scanner and a radar altimeter into the low altitude satellite utilizing a data relay satellite system, volume 3
Explore the source record for details and available documents.
Skylab S-193 radar altimeter experiment analyses and results
The design of optimum filtering procedures for geoid recovery is discussed. Statistical error bounds are obtained for pointing angle estimates using average waveform data. A correlation of tracking loop bandwidth with magnitude of pointing error is established. The impact of ocean currents and precipitation on the received power are shown to be measurable effects. For large sea state conditions, measurements of sigma 0 deg indicate a distinct saturation level of about 8 dB. Near-nadir less than 15 deg values of sigma 0 deg are also presented and compared with theoretical models. Examination of Great Salt Lake Desert scattering data leads to rejection of a previously hypothesized specularly reflecting surface. Pulse-to-pulse correlation results are in agreement with quasi-monochromatic optics theoretical predictions and indicate a means for estimating direction of pointing error. Pulse compression techniques for and results of estimating significant waveheight from waveform data are presented and are also shown to be in good agreement with surface truth data. A number of results pertaining to system performance are presented.
An atlas of 1975 GEOS-3 radar altimeter data for hurricane/tropical disturbance studies, volume 2
For abstract, see N77-24726.
An atlas of GEOS-3 radar altimeter data for data buoy comparison studies
An atlas is compiled to identify times and dates when GEOS-3 altimeter data was taken in the vicinity of data buoys. The time period covered is from GEOS launch to April 9, 1978. Two buffer areas are considered for each of the various buoy locations to determine the simultaneity of GEOS and buoy data. The two buffer areas are ? or - 0.25 degrees and ? or - 1 degree.
An atlas of 1977 and 1978 GEOS-3 radar altimeter data for tropical cyclone studies
All of the GEOS 3 satellite altimeter schedule information were collected with all of the available 1977 and 1978 tropical cyclone positional information. The time period covers from March 23, 1977 through Nov. 23, 1978. The geographical region includes all ocean area north of the equator divided into the following operational areas: the Atlantic area (which includes the Caribbean and Gulf of Mexico); the eastern Pacific area; the central and western Pacific area; and the Indian Ocean area. All available source material concerning tropical cyclones was collected. The date/time/location information was extracted for each disturbance. This information was compared with the GEOS 3 altimeter ON/OFF history information to determine the existence of any altimeter data close enough in both time and location to make the data potentially useful for further study (the very liberal criteria used was time less than 24 hours and location within 25 degrees). Geographic plots (cyclone versus GEOS 3 orbit track) were produced for all of the events found showing the approximate location of the cyclone and the GEOS 3 orbit traces for the full day.
Comparison of sea surface wind speed fields by SEASAT radar altimeter, scatterometer and scanning multichannel microwave radiometer with an emphasis on the Southern Ocean
The SEASAT altimeter (ALT), scatterometer (SASS), and scanning microwave multichannel radiometer (SMMR) measured sea surface wind speed. During the satellite lifetime from June to October 1978, the Austral winter, the highest wind speeds were recorded in the Southern Ocean. Three-month, monthly, and three-day surface wind speed fields deduced from the three Seasat wind speed sensors are compared. The monthly and three-day fields show a pronounced mesoscale (1000 km) variability in wind speed. At all space and time scales analyzed, differences of 40% are found in the magnitude of the wind speed features, with the ALT consistently yielding the lowest wind speed and the SMMR the highest.
A scanning radar altimeter for mapping continental topography
Topographic information constitutes a fundamental data set for the Earth sciences. In the geological and geophysical sciences, topography combined with gravitational information provides an important constraint on the structure and rheologic properties of the crust and lithosphere. Detailed topography data can also be used to map offsets associated with faulting and to reveal the effects of tectonic deformation. In the polar regions, elevation data form a crucial but as yet largely unavailable resource for studying ice sheet mass balance and ice flow dynamics. The vast Antarctic ice sheet is the largest fresh water reservoir on Earth and is an important influence on ocean circulation and global climate. However, our knowledge of its stability is so limited that we cannot even specify whether the Antarctic ice sheet is growing or shrinking. It is clear that there is need for high quality global topography data. A summary of potential applications with their resolution requirements is shown.
Martian surface physical properties to be derived by radar altimeter on the Mars observer spacecraft
The potential is described of a candidate Mars Observer altimeter for determining dielectric properties of Mars regolith. It is pointed out that it is straightforward to use the time between altimeter pulse trains for passive radiometry (hence dielectric properties) and roughness can be derived. Given the mission plan the whole surface can be mapped at least three times, yielding data on seasonal variability.
Radar altimeter calibration using SLR
Clearly a calibration of the TOPEX altimeter (and future TOPEX-class altimeters) which is more accurate and better prepared to meet the demands of global sea level trend monitoring is warranted. TOPEX/Posideon (T/P) is in its second year of data acquisition. If it survives or surpasses the two to five year projected baseline, an unprecedented opportunity for monitoring global sea level trends at mm/y levels will have been lost due to insufficient accuracy in its altimeter calibration. It is therefore paramount to revisit the design of the T/P calibration experiment and implement a more direct approach which better utilizes the accuracy of SLR to perform this needed bias assessment.
Measurement of ocean wave heights using the Geos 3 altimeter
Radar altimeter signals transmitted from the low-orbiting satellite Geos 3 were analyzed for two selected orbits over high seas associated with hurricane 'Caroline' in the Gulf of Mexico and a North Atlantic storm. The measured values of significant wave height are in reasonable agreement with surface measurements, provided that the altimeter data are properly edited. The internal consistency of estimated wave heights for the North Atlantic storm, a standard deviation of 0.6 m or less, and the good agreement with surface truth lend credence to the method. A statistical analysis of the pulse slope variation gives estimated values of significant wave height within + or - 1 m of the true values 75% of the time for spatial averaging over 70 km.
TOPEX/Poseidon Microwave Radiometer (TMR): 1. Instrument Description and Antenna Temperature Calibration
The TOPEX/Poseidon Microwave Radiometer (TMR) is a 3-frequency radiometer flown on the TOPEX/Poseidon (T/P) satellite in low Earth orbit. It operates at 18, 21 and 37 GHz in a nadir only viewing direction which is co-aligned with the T/P radar altimeters. TMR monitors and corrects for the electrical path delay of the altimeter radar signal due to water vapor and non-precipitating liquid water in the atmosphere. This paper describes the TMR instrument and the radiometric instrument calibration required to derive antenna temperature (T_A) from the raw digital data. T_A precision of 0.4 K is predicted on orbit in all expected thermal environments. T_A accuracy of 0.5-0.6 K is expected following a post-launch field calibration campaign. When uncertainties related to antenna sidelobe corrections are included, this T_A accuracy yields a brightness temperature accuracy of 0.7- 0.8 K...
Experimental measurement and theoretical modeling of microwave scattering and the structure of the sea surface influencing radar observations from space
The electromagnetic bias is an error present in radar altimetry of the ocean due to the non-uniform reflection from wave troughs and crests. A study of the electromagnetic bias became necessary to permit error reduction in mean sea level measurements of satellite radar altimeters. Satellite radar altimeters have been used to find the upper and lower bounds for the electromagnetic bias. This report will present a theory using physical optics scattering and an empirical model of the short wave modulation to predict the electromagnetic bias. The predicted electromagnetic bias will be compared to measurements at C and Ku bands.
Gravity and Nonconservative Force Model Tuning for the GEOSAT Follow-On Spacecraft
The US Navy's GEOSAT Follow-On spacecraft was launched on February 10, 1998 and the primary objective of the mission was to map the oceans using a radar altimeter. Three radar altimeter calibration campaigns have been conducted in 1999 and 2000. The spacecraft is tracked by satellite laser ranging (SLR) and Doppler beacons and a limited amount of data have been obtained from the Global Positioning Receiver (GPS) on board the satellite. Even with EGM96, the predicted radial orbit error due to gravity field mismodelling (to 70x70) remains high at 2.61 cm (compared to 0.88 cm for TOPEX). We report on the preliminary gravity model tuning for GFO using SLR, and altimeter crossover data. Preliminary solutions using SLR and GFO/GFO crossover data from CalVal campaigns I and II in June-August 1999, and January-February 2000 have reduced the predicted radial orbit error to 1.9 cm and further reduction will be possible when additional data are added to the solutions. The gravity model tuning has improved principally the low order m-daily terms and has reduced significantly the geographically correlated error present in this satellite orbit. In addition to gravity field mismodelling, the largest contributor to the orbit error is the non-conservative force mismodelling. We report on further nonconservative force model tuning results using available data from over one cycle in beta prime.