Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Printing 2D Conjugated Polymer Monolayers and Their Distinct Electronic Properties

Abstract Recently, 2D monolayer films of conjugated polymers have gained increasing attention owing to the preeminence of 2D inorganic films that exhibit unique optoelectronic and mechanical properties compared to their bulk analogs. Despite numerous efforts, crystallization of semiconducting polymers into highly ordered 2D monolayer films still remains challenging. Herein, a dynamic‐template‐assisted meniscus‐guided coating is utilized to fabricate continuous, highly ordered 2D monolayer films of conjugated polymers over a centimeter scale with enhanced backbone π–π stacking. In contrast, monolayer films printed on solid substrates confer upon the 1D fiber networks strong alkyl side‐chain stacking at the expense of backbone packing. From single‐layers to multilayers, the polymer π‐stacks change from edge‐on to bimodal orientation as the film thickness reaches ≈20 nm. Spectroscopic and cyclic voltammetry analysis reveals an abrupt increase in J‐aggregation and absorption coefficient and a decrease in bandgap and highest occupied molecular orbital level until critical thickness, possibly arising from the straightened polymer backbone. This is corroborated by an abrupt increase in hole mobility with film thickness, reaching a maximum of 0.7 cm 2 V −1 s −1 near the critical thickness. Finally, fabrication of chemical sensors incorporating polymer films of various thicknesses is demonstrated, and an ultrahigh sensitivity of the ≈7 nm thick ultrathin film (bilayers) to 1 ppb ammonia is shown.

Kafle, Prapti↗
DOE OSTI2022

Improving bamboo’s fuel and storage properties with a net energy export through torrefaction paired with catalytic oxidation

Using torrefied char, or biocoal, as solid fuel provides an opportunity to introduce a sustainable feedstock into the energy market. The goals of this study were to investigate how torrefaction improves the energy content and the grindability of a Malaysian bamboo along with understanding the potential for integrated energy recovery from torrefaction gases. The feedstock was torrefied at 250–290 °C for 1 h and the combustion characteristics and grindability of the solid products along with the composition of torrefied gas species were measured. The results showed a beneficial increase in elemental carbon increased from 47 to 63 wt% at 290 °C torrefaction, reflecting an increase in higher heating value from 17.8 to 25.6 MJ/kg. The combustion behavior of all the products appeared to show three distinct combustion zones; however, torrefaction severity leading to higher combustion temperature and time as the fixed carbon augmented with the increase of torrefaction temperature. This increase in severity also lead to more friable and grindable material, and the 290 °C condition required a factor of 2.7 less hold-up time in the mill compared to the raw bamboo, and a factor of 8.5 less energy (938 and 111 kWh/tonne respectively). Through analysis of the gas and volatile formation, a case study showed that catalytic oxidation can convert nearly 100% of the embodied chemical energy into usable thermal energy. These experimental findings were scaled to a 100,000 tonne/y capacity torrefaction plant and in the moderate case of 270 °C operating temperature, the plant has 1.25 GJ/tonne excess energy beyond what the process needs.

09 BIOMASS FUELS↗
DOE OSTI2021

A microstructure-based modeling approach to predict the mechanical properties of Zr alloy with hydride precipitates

In nuclear reactors, hydrides can form in fuel cladding due to hydrogen absorption in ZIrcaloy and cause embrittlement. This work presents a microstructure-based finite element model to predict the stress-strain response of Zircaloy containing hydrides. Quantitative microstructural details extracted from scanning electron microscopy (SEM) images were used to generate heterogeneous microstructures including the morphology and spatial distribution of hydrides. The constitutive material model for zircaloy in this study is based on crystal plasticity theory which considers the hexagonal close-packed (HCP) atomic structure of Zircaloy material. The hydrides were modeled as brittle material along with a damage model. Hydride formation inside the zircoloy matrix results in residual stress. This phenomenon is also captured in this model. A parametric study has been conducted to understand the effect of volume fraction, orientation, and lamellae thickness of the hydride phase on the mechanical properties of the overall material.

Kulkarni, Shank S.↗
DOE OSTI2023

Understanding the effect of specimen size on the properties of fine-grain isotropic nuclear graphite for irradiation studies: Mechanical properties

Programs at Oak Ridge National Laboratory are investigating the effects of neutron irradiation in the High Flux Isotope Reactor (HFIR) on properties of fine-grain isotropic nuclear graphites. Specimens were irradiated in the HFIR flux trap, which requires using specimens that are smaller than the sizes recommended by ASTM standards. Here, this work has investigated whether subsized specimens can be used to reliably predict strength behavior. The results show that (1) tensile strength was loosely coupled to specimen volume, (2) the compression specimens had a slightly higher strength for larger volumes, (3) the uniaxial flexural strength was nearly independent of specimen effective area for one orientation whereas the other orientation showed a slight strength–size scaling Weibull behavior, and (4) equibiaxial flexural strength followed traditional strength–size scaling Weibull behavior. These results suggest that fine-grain graphite is more similar to ceramics than to medium- and large-grained graphite with respect to both the strength-limiting flaws (Griffith theory) and the effect of machining on the strength behavior. This work shows that using specimens that are smaller than ASTM recommendations are suitable for investigating the strength changes caused by neutron irradiation because the primary interest is the relative change in the strength distribution parameters rather than their absolute values.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Influence of Polymer Type and Carbon Nanotube Properties on Carbon Nanotube/Polymer Nanocomposite Biodegradation

The interaction of anaerobic microorganisms with carbon nanotube/polymer nanocomposites (CNT/PNC) will play a major role in determining their persistence and environmental fate at the end of consumer use when these nano-enabled materials enter landfills and encounter wastewater. Motivated by the need to understand how different parameters (i.e., polymer type, microbial phenotype, CNT characteristics) influence CNT/PNC biodegradation rates, we have used volumetric biogas measurements and kinetic modeling to study biodegradation as a function of polymer type and CNT properties. In one set of experiments, oxidized multiwall carbon nanotubes (O-MWCNTs) with a range of CNT loadings 0 – 5% w/w were incorporated into poly-e-caprolactone (PCL) and polyhydroxyalkanoates (PHA) matrices and subjected to biodegradation by an anaerobic microbial community. For each CNT/PNC, complete polymer biodegradation was ultimately observed, although the rate of biodegradation was inhibited above certain critical CNT loadings dependent upon the polymer type. Higher loadings of pristine MWCNTs were needed to decrease the rate of polymer biodegradation compared to O-MWCNTs, an effect ascribed principally to differences in CNT dispersion within the polymer matrices. Above ertain CNT loadings, a CNT mat of similar shape to the initial PNC was formed after polymer biodegradation, while below this threshold, CNT aggregates fragmented in the media. In situations where biodegradation was rapid, methanogen growth was disproportionately inhibited compared to the overall microbial community. Analysis of the results obtained from this study indicates that the inhibitory effect of CNTs on polymer biodegradation rate is greatest under conditions (i.e., polymer type, microbial phenotype, CNT dispersion) where biodegradation of the neat polymer is slowest. This new insight provides a means to predict the environmental fate, persistence and transformations of CNT-enabled polymer materials.

Frank, Benjamin↗
DOE OSTI2022

Thermal Stability and Mechanical Properties of Cold-Sprayed Nickel-Yttria Coating

The microstructural evolution under the extreme environments imposed during cold spray deposition of cermet coatings and the microstructural recovery during post-processing annealing treatments is rather complex and not well understood. Here, Ni-Yttria cermet coatings on an SS304 substrate were produced using cold spray technique, resulting in a bimodal grain structure. The grain growth, phase stability, hardness, and wear properties are observed in as-deposited and annealed (at 400 °C) Ni-Yttria and pure Ni coatings. A multimodal microstructural characterization using electron microscopy, and atom probe tomography shows the structural and compositional stability of yttria particles and Ni grains. A fragmentation of Y-rich particles and dispersion in Ni was observed, however, no forced mixing/dissolution of Y in Ni is detected. Nano-yttria dispersed within the Ni grains slowed the grain growth during annealing. After annealing, Yttria reinforced coating was 1.5 times harder and showed better thermal and mechanical stability compared to the Ni coating.

Gwalani, Bharat↗
DOE OSTI2024

Heterometallic UO 2 2+ /Ag + Complexes: Structural Design and Luminescence Properties

Reported here are the synthesis, structural characterization, and luminescence properties of 11 novel UO 2 2+ /Ag + heterometallic complexes. Halogenated benzoic acids (2,6-dihalobenzoic acid (halo = F, Br), 3,5-dichlorobenzoic acid, and 3-halobenzoic acid (halo = Br, I)) and N-donor polycyclic ligands (2,2′-bipyridine, 2,2’;6′,2″-terpyridine, 1,10-phenanthroline, 2,2′-bipyrimidine) were employed to synthesize a set of compounds and induce structural diversity. The primary mode of coordination with the uranyl cation is hexagonal bipyramidal monomeric units with three halobenzoate ligands in the equatorial plane, though 1-D chains with pentagonal bipyramidal uranyl centers also form. The Ag + cations coordinate preferentially to the N-donor ligands and serve as counter-cations for the anionic uranyl motifs. The soft ligand character of the N-donor molecules is found to be a requirement for the inclusion of the Ag + cation into the structures. Anionic uranyl units and cationic silver units assemble via noncovalent interactions between π systems on adjacent rings and between halogens (when Br and I are present). Solid-state emission spectra display the usual uranyl band with superimposed vibronic fine structure, except for that of compound 1 , which shows emission from the 2,2′-bipyridine center. This family of compounds represents a substantial contribution to the already rich library of UO 2 2+ /Ag + compounds, and the synthetic parameters discussed within reveal a platform for the design of new heterometallic uranyl-containing materials.

anions↗
DOE OSTI2021

Crystal Structure and Properties of Layered Pnictides BaCuSi2Pn3 (Pn = P, As)

Two novel layered compounds BaCuSi 2 Pn 3 (Pn = P, As) adopting new structure types are reported. As revealed by single-crystal X-ray diffraction, both compounds are composed of unique Cu–Si–Pn layers featuring CuPn 3 and Si 2 Pn 6 structural motifs found in other archetypal pnictide materials. The stacking of the isostructural Cu–Si–Pn layers is different for phosphide and arsenide compounds. Synthesis from elements aided by in situ synchrotron powder X-ray diffraction resulted in the obtainment of bulk powders with a minimized amount of admixtures. Experimentally measured physical properties of BaCuSi 2 As 3 unexpectedly showed metal-like behavior at temperatures above 15 K, despite the fact that density functional theory calculations predict a small band gap of 0.4 eV. BaCuSi 2 As 3 exhibits ultralow thermal conductivity, which can be explained by the combination of a layered crystal structure with alternating covalent and ionic bonding, which feature rattling of Cu atoms similar to that in tetrahedrites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Two Polymorphs of BaZn 2 P 2 : Crystal Structures, Phase Transition, and Transport Properties

Here, the novel α-BaZn 2 P 2 structural polymorph has been synthesized and structurally characterized for the first time. Its structure, elu-cidated from single crystal X-ray diffraction, indicates that the compound crystallizes in the orthorhombic α-BaCu 2 S 2 structure type, with unit cell parameters a = 9.7567(14) Å, b = 4.1266(6) Å, and c = 10.6000(15) Å. With β-BaZn 2 P 2 being previously iden-tified as belonging to the ThCr 2 Si 2 family, and with the precedent of structural phase transitions between the α-BaCu 2 S 2 type and the ThCr 2 Si 2 type, the potential for the pattern to be extended to the two different structural forms of BaZn 2 P 2 was explored. Thermal analysis suggest that a first order phase transition occurs at ~1123 K, whereby the low-temperature orthorhombic α-phase transforms to a high-temperature tetragonal β-BaZn 2 P 2 ; the structure of which was also studied and confirmed by single-crystal X-ray diffraction. Preliminary transport properties and band structure calculations indicate that α-BaZn 2 P 2 is a p-type, narrow-gap semiconductor with a direct bandgap (Eg) of 0.5 eV. The Seebeck coefficient, S(T), for the material increases steadily from the room temperature value of 119 µV/K to 184 µV/K at 600 K. The electrical resistivity of α-BaZn 2 P 2 is relatively high, on the order of 40 mΩ·cm, and the ρ(T) dependence shows gradual decrease upon heating. Such behavior is comparable to those of the typical semimetals or degenerate semiconductors. Although the observed values of the as-synthesized samples are not optimal, the carrier concentration can apparently be tuned to fall between the values of metals and semiconductors, thus providing an open window for optimizing this phase towards achieving an enhanced thermoelectric figure of merit zT. The calculated indirect band gap for the β-BaZn 2 P 2 phase is Eg = 0.03 eV which is about an order of magnitude lower than that of α-BaZn 2 P 2 . It is expected that the cage-like structural motif and layered structure possessed by α-BaZn 2 P 2 and β-BaZn 2 P 2 phases, respectively, would promote the realiza-tion of a low thermal conductivity in both compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗