Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Propagation of Variance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

CME PROPAGATION: WHERE DOES AERODYNAMIC DRAG “TAKE OVER”?

We investigate the Sun–Earth dynamics of a set of eight well observed solar coronal mass ejections (CMEs) using data from the Solar Terrestrial Relations Observatory spacecraft. We seek to quantify the extent to which momentum coupling between these CMEs and the ambient solar wind (i.e., the aerodynamic drag) influences their dynamics. To this end, we use results from a 3D flux rope model fit to the CME data. We find that solar wind aerodynamic drag adequately accounts for the dynamics of the fastest CME in our sample. For the relatively slower CMEs, we find that drag-based models initiated below heliocentric distances ranging from 15 to 50 R{sub ⊙} cannot account for the observed CME trajectories. This is at variance with the general perception that the dynamics of slow CMEs are influenced primarily by solar wind drag from a few R{sub ⊙} onwards. Several slow CMEs propagate at roughly constant speeds above 15–50 R{sub ⊙}. Drag-based models initiated above these heights therefore require negligible aerodynamic drag to explain their observed trajectories.

79 ASTRONOMY AND ASTROPHYSICS↗

Onset of interfacial waves in the terahertz spectrum of a nanoparticle suspension

We used inelastic x-ray scattering to gain insight into the complex terahertz dynamics of a diluted Au-nanoparticle suspension in glycerol. Here, we observe that, albeit sparse, Au nanoparticles leave clear signatures on the dynamic response of the system, the main one being an additional mode propagating at the nanoparticle-glycerol interface. A Bayesian inferential analysis of the line shape reveals that such a mode, at variance with conventional acoustic modes, keeps a hydrodynamiclike behavior well beyond the continuous limit and down to subnanometer distances.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Propagation of electromagnetic waves in Kolmogorov and non-Kolmogorov atmospheric turbulence: three-layer altitude model

Turbulence properties of communication links (optical and microwave) in terms of log-amplitude variance are studied on the basis of a three-layer model of refractive index fluctuation spectrum in the free atmosphere. We suggest a model of turbulence spectra (Kolmogorov and non-Kolmogorov) changing with altitude on the basis of obtained experimental and theoretical data for turbulence profile in the troposphere and lower stratosphere.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A probabilistic perspective on thermodynamic parameter uncertainties: Understanding aqueous speciation of mercury

Speciation plays an important role in determining the fate and transport of metals in terrestrial surface and subsurface systems. Equilibrium speciation modeling in aqueous systems relies on thermodynamic constants (log K values) of complexes, which are subject to uncertainties. In this study, using Monte Carlo (MC) simulations with Latin hypercube sampling (LHS) we systematically analyze the propagation of thermodynamic constant uncertainty through speciation modeling of an inorganic mercury-sulfide-chloride-water system. We find that seemingly small variances of the input log K normal distributions can lead to output species concentrations spanning multiple orders of magnitude, with highly skewed probability distributions. When equilibrium with mineral metacinnabar (β-HgS(s)) is neglected, the relative uncertainty of each output species is strongly positively correlated with the skewness of its concentration probability distribution, i.e., the lowest uncertainty occurs when the species concentration probability distribution is the most negatively skewed as its concentration approaches the total element concentration limit. The highest uncertainty in the identity of dominant species is located around species equivalence points. For cases where the mineral equilibrium is included, we derive analytical probability density functions for the log concentrations of all major species in the system. The mineral log K uncertainty is found to be an important contributor to all output concentration uncertainties. The analysis of combined effects of both pH and total sulfide concentration on output concentration uncertainties shows that high concentration uncertainties occur under highly sulfidic alkaline conditions and low uncertainties at low pH and sulfide concentrations. Finally, an analysis as presented here can distinguish between conditions that require a full uncertainty analysis and those for which the classical deterministic speciation modeling suffices.

58 GEOSCIENCES↗

A variance deconvolution estimator for efficient uncertainty quantification in Monte Carlo radiation transport applications

Monte Carlo simulations are at the heart of many high-fidelity simulations and analyses for radiation transport systems. As is the case with any complex computational model, it is important to propagate sources of input uncertainty and characterize how they affect model output. Unfortunately, uncertainty quantification (UQ) is made difficult by the stochastic variability that Monte Carlo transport solvers introduce. The standard method to avoid corrupting the UQ statistics with the transport solver noise is to increase the number of particle histories, resulting in very high computational costs. In this contribution, we propose and analyze a sampling estimator based on the law of total variance to compute UQ variance even in the presence of residual noise from Monte Carlo transport calculations. Here, we rigorously derive the statistical properties of the new variance estimator, compare its performance to that of the standard method, and demonstrate its use on neutral particle transport model problems involving both attenuation and scattering physics. We illustrate, both analytically and numerically, the estimator’s statistical performance as a function of available computational budget and the distribution of that budget between UQ samples and particle histories. We show analytically and corroborate numerically that the new estimator is unbiased, unlike the standard approach, and is more accurate and precise than the standard estimator for the same computational budget.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Analytic Steady-State Accuracy of a Spacecraft Attitude Estimator

This paper extends Farrenkopf's analysis of a single-axis spacecraft attitude estimator using gyro and angle sensor data to include the angle output white noise of a rate-integrating gyro. Analytic expressions are derived for the steady-state pre-update and post-update angle and drift bias variances and for the state update equations. It is shown that only part of the state update resulting from the angle sensor measurement is propagated to future times.

Markley, F. Landis↗

High-Speed, High-Resolution Time-to-Digital Conversion

This innovation is a series of time-tag pulses from a photomultiplier tube, featuring short time interval between pulses (e.g., 2.5 ns). Using the previous art, dead time between pulses is too long, or too much hardware is required, including a very-high-speed demultiplexer. A faster method is needed. The goal of this work is to provide circuits to time-tag pulses that arrive at a high rate using the hardwired logic in an FPGA - specifically the carry chain - to create what is (in effect) an analog delay line. High-speed pulses travel down the chain in a "wave." For instance, a pulse train has been demonstrated from a 1- GHz source reliably traveling down the carry chain. The size of the carry chain is over 10 ns in the time domain. Thus, multiple pulses will travel down the carry chain in a wave simultaneously. A register clocked by a low-skew clock takes a "snapshot" of the wave. Relatively simple logic can extract the pulses from the snapshot picture by detecting the transitions between logic states. The propagation delay of CMOS (complementary metal oxide semiconductor) logic circuits will differ and/or change as a result of temperature, voltage, age, radiation, and manufacturing variances. The time-to-digital conversion circuits can be calibrated with test signals, or the changes can be nulled by a separate on-die calibration channel, in a closed loop circuit.

Katz, Richard↗

A Framework for Distributed Approximation of Moments with Higher-Order Derivatives through Automatic Differentiation

We present a framework for the distributed approximation of moments, enabling the evaluation of the uncertainty in a dynamical system. The first and second moment, mean, and variance are computed with up to third-order Taylor series expansion. The required derivatives for the expansion are generated automatically by automatic differentiation and propagated through an implicit time stepper. The computational kernels are the accumulation of the derivatives (Jacobian, Hessian, tensor) and the covariance matrix. We apply distributed parallelism to the Hessian or third-order tensor, and the user merely has to provide a function for the differential equation, thus achieving similar ease of use as Monte Carlo-based methods. We demonstrate our approach using with benchmarks on Theta, a KNL-based system at the Argonne Leadership Computing Facility.

Automatic Differentiation↗

Incorporating the Effect of Large‐Scale Vertical Motion on Convection Through Convective Mass Flux Adjustment in E3SMv2

Abstract Recent observational studies suggest that the large‐scale dynamical forcing (vertical motion) plays important roles in deep convection development. In this study we propose a convective mass flux adjustment (MAdj) approach to represent the dynamical effects of large‐scale vertical motion on convection in the Department of Energy's Energy Exascale Earth System Model version 2 (E3SMv2). With MAdj, convection is enhanced (suppressed) when there is large‐scale ascending (descending) motion at the planetary boundary layer top. The coupling of convection with large‐scale circulation significantly improves the simulation of climate variability in E3SMv2 across multiple scales from the diurnal cycle, convectively coupled equatorial waves, to the Madden‐Julian Oscillation (MJO). The standard E3SMv2 tends to simulate overly weak diurnal amplitude of precipitation and overly weak variance of convectively coupled equatorial Kelvin and westward inertio‐gravity (WIG) waves. It also fails to simulate the essential characteristics of the MJO: continuous eastward propagation. With MAdj, the amplitude of diurnal cycle of precipitation is systematically increased and its probability density distribution is much closer to observations. The MAdj can also simulate more realistic eastward propagation of the MJO and much stronger convectively coupled Kelvin and WIG waves. Moreover, the MAdj approach slightly improves the climatology simulations in precipitation, cloud, radiation, circulation, temperature, and moisture fields, with overall root‐mean‐square error (RMSE) of major climatological fields reduced by about 2%. The MAdj approach suppresses excessive grid‐scale precipitation, reducing precipitation wet biases over South China Sea, Philippine Sea, Himalayas, and South Pacific Convergence Zone in western Pacific in summer.

54 ENVIRONMENTAL SCIENCES↗

Special Effects: Antenna Wetting, Short Distance Diversity and Depolarization

The Advanced Communication Technology Satellite (ACTS) communications system operates in the Ka frequency band. ACTS uses multiple, hopping, narrow beams and very small aperture terminal (VSAT) technology to establish a system availability of 99.5% for bit-error-rates of 5 x 10(exp -7) Or better over the continental United States. In order maintain this minimum system availability in all US rain zones, ACTS uses an adaptive rain fade compensation protocol to reduce the impact of signal attenuation resulting from propagation effects. The purpose of this paper is to present the results of system and sub-system characterizations considering the statistical effects of system variances due to antenna wetting and depolarization effects. In addition the availability enhancements using short distance diversity in a sub-tropical rain zone are investigated.

Acosta, Roberto J.↗

The principal component analysis method used with polynomial Chaos expansion to propagate uncertainties through critical transport problems

A critical neutron transport problem with random material properties is introduced. The total cross section and the average neutron multiplicity are assumed to be uncertain, characterized by the mean and variance with a log-normal distribution. The average neutron multiplicity and the total cross section are assumed to be uncorrected and the material properties for differing materials are also assumed to be uncorrected. The principal component analysis method is used to decompose the covariance matrix into eigenvalues and eigenvectors and then 'realizations' of the material properties can be computed. A simple Monte Carlo brute force sampling of the decomposed covariance matrix is employed to obtain a benchmark result for each test problem. In order to save computational time and to characterize the moments and probability density function of the multiplication factor the polynomial chaos expansion method is employed along with the stochastic collocation method. A Gauss-Hermite quadrature set is convolved into a multidimensional tensor product quadrature set and is successfully used to compute the polynomial chaos expansion coefficients of the multiplication factor. Finally, for a particular critical fuel pin assembly the appropriate number of random variables and polynomial expansion order are investigated. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A generalized approximate control variate framework for multifidelity uncertainty quantification

We describe and analyze a variance reduction approach for Monte Carlo (MC) sampling that accelerates the estimation of statistics of computationally expensive simulation models using an ensemble of models with lower cost. These lower cost models — which are typically lower fidelity with unknown statistics — are used to reduce the variance in statistical estimators relative to a MC estimator with equivalent cost. We derive the conditions under which our proposed approximate control variate framework recovers existing multifidelity variance reduction schemes as special cases. We demonstrate that existing recursive/nested strategies are suboptimal because they use the additional low-fidelity models only to efficiently estimate the unknown mean of the first low-fidelity model. As a result, they cannot achieve variance reduction beyond that of a control variate estimator that uses a single low-fidelity model with known mean. However, there often exists about an order-of-magnitude gap between the maximum achievable variance reduction using all low-fidelity models and that achieved by a single low-fidelity model with known mean. We show that our proposed approach can exploit this gap to achieve greater variance reduction by using non-recursive sampling schemes. The proposed strategy reduces the total cost of accurately estimating statistics, especially in cases where only low-fidelity simulation models are accessible for additional evaluations. Several analytic examples and an example with a hyperbolic PDE describing elastic wave propagation in heterogeneous media are used to illustrate the main features of the methodology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Equatorial wave activity derived from fluctuations in observed convection

The spectrum of equatorial wave activity propagating vertically into the stratosphere is calculated from high-resolution imagery of the global convective pattern. Synoptic Global Cloud Imagery (GCI), constructed from six satellites simultaneously observing the earth, is used to diabatically force the linearized primitive equations. Having resolution of 0.5 deg and 3 h, that imagery captures the dominant scales of organized convection, including several harmonics of the diurnal cycle. Its global coverage with high space-time resolution allows the GCI to represent heating variability and dynamical behavior excited by it over a wide range of scales. The dynamical response above the heating is evaluated globally in terms of a space-time spectrum of Hough modes, one which includes planetary-scale Kelvin waves, Rossby waves, and gravity waves down to the resolution of the GCI. The geopotential response, which is indicative of temperature fluctuations observed by satellite, is very red in frequency. Therefore, planetary-scale waves with periods longer than two days dominate the spectrum of geopotential, while high-frequency gravity waves make a comparatively small contribution. Some 80% of the geopotential variance is accounted for by the Kelvin and gravest-symmetric Rossby modes, while the Rossby-gravity mode is comparatively weak. In horizontal eddy motion, the excited wave spectrum is still dominated by planetary-scale components. However, meridional wind fluctuations associated with the Rossby-gravity mode have variance comparable to that of zonal wind fluctuations associated with the Kelvin mode, even though the Rossby-gravity mode is nearly invisible in the geopotential response. Estimates of tropospheric heating lead to amplitudes and propagation characteristics that are broadly consistent with satellite and radiosonde observations of wave activity in the lower stratosphere. The space-time spectrum of EP flux is significantly whiter than the response in either geopotential or motion. Gravity waves of small scale and high frequency carry a large fraction of the upward flux. Although it dominates eastward variance of geopotential and motion, the Kelvin mode carries only about 50% of the eastward EP flux at phase speeds of 20-40 m/s and only 35% of the total eastward flux transmitted to the stratosphere. The remainder is carried by the gravity wave spectrum, which carries nearly all of the westward flux at phase speeds greater than 20 m/s. The gravity wave spectrum also contributes significantly at phase speeds of 10-20 m/s, where only 25% of the flux is accounted for by zonal wavenumbers less than 20. The broad nature of the gravity wave spectrum suggests its absorption at critical levels will be distributed over a deep layer of the middle atmosphere.

Bergman, John W.↗

Mesh objective stochastic simulations of quasibrittle fracture

Continuum finite element (FE) modeling of damage and failure of quasibrittle structures suffers from the spurious mesh sensitivity due to strain localization. Here this issue has been addressed for deterministic analysis through the development of localization limiters. Here this study proposes a mechanism-based model to mitigate the mesh sensitivity in stochastic FE simulations of quasibrittle fracture. The interest is placed on the analysis of large-size structures, where the mesh size is conveniently chosen to be larger than the width of the fracture process zone as well as the correlation length of the random fields of constitutive properties. The present model is formulated within the framework of continuum damage mechanics. Two localization parameters are introduced to describe the evolution of the damage pattern of each finite element. These parameters are used to guide the energy regularization of the constitutive law, as well as to formulate the mesh-dependent probability distributions of constitutive properties. Depending on the prevailing damage pattern, different energy regularization schemes and mesh dependence of the probability distribution functions are used in the constitutive law. The model is applied to simulate the stochastic failure behavior of quasibrittle structures of different geometries featuring different failure processes including damage initiation, localization, and propagation. It is shown that using fixed probability distribution functions of constitutive properties could lead to strong mesh dependence of the prediction of the mean and variance of the structural load capacity. The probability distribution functions of constitutive properties must be linked to the damage pattern, which may evolve during the failure process. Such a mechanism-based modeling of the probability distributions of constitutive properties is essential for mitigating the spurious mesh sensitivity in stochastic FE analysis of quasibrittle fracture.

42 ENGINEERING↗

Validation of SAS4A/SASSYS-1 for predicting steady-state single-phase natural circulation

The validation of system analysis codes for nuclear reactor systems is required for the development and application of these computational tools. Designed as a comprehensive system analysis code for advanced nuclear reactors, SAS4A/SASSYS-1 requires validation of its physics model for capturing single-phase natural circulation behavior. To support the validation of SAS4A/SASSYS-1, high-precision experiments are performed capturing steady-state single-phase natural circulation on a scaled facility with comprehensive instrumentation. In this work, dedicated tests are performed quantifying the critical modeling parameters, and a single-phase natural circulation benchmark dataset is obtained with well-documented uncertainty and comprehensive facility description. The validation is then performed against the dataset examining the capability of SAS4A/SASSYS-1 in simulating steady-state single-phase natural circulation. The experimental facility is modeled in the candidate code. Solution verification is performed using Richardson-extrapolation-based estimators which quantify and restrict numerical errors from discretization. Input uncertainty provided by the benchmark dataset is forward propagated through the candidate code, quantifying the output uncertainty in a Monte Carlo approach. The composition of the output uncertainty is also quantified through a variance-based sensitivity analysis. With the uncertainty quantified for each individual condition, a detailed comparison between the simulation results and experimental data is performed covering the whole dataset. The results show consistent agreement for all primary parameters. The current validation activity provides a valuable benchmark dataset for the validation of system analysis codes in capturing single-phase natural circulation and demonstrates satisfactory prediction capability of SAS4A/SASSYS1 for steady-state single-phase natural circulation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

SAD phasing of XFEL data depends critically on the error model

A nonlinear least-squares method for refining a parametric expression describing the estimated errors of reflection intensities in serial crystallographic (SX) data is presented. This approach, which is similar to that used in the rotation method of crystallographic data collection at synchrotrons, propagates error estimates from photon-counting statistics to the merged data. Here, it is demonstrated that the application of this approach to SX data provides better SAD phasing ability, enabling the autobuilding of a protein structure that had previously failed to be built. Estimating the error in the merged reflection intensities requires the understanding and propagation of all of the sources of error arising from the measurements. One type of error, which is well understood, is the counting error introduced when the detector counts X-ray photons. Thus, if other types of random errors (such as readout noise) as well as uncertainties in systematic corrections (such as from X-ray attenuation) are completely understood, they can be propagated along with the counting error, as appropriate. In practice, most software packages propagate as much error as they know how to model and then include error-adjustment terms that scale the error estimates until they explain the variance among the measurements. If this is performed carefully, then during SAD phasing likelihood-based approaches can make optimal use of these error estimates, increasing the chance of a successful structure solution. In serial crystallography, SAD phasing has remained challenging, with the few examples of de novo protein structure solution each requiring many thousands of diffraction patterns. Here, the effects of different methods of treating the error estimates are estimated and it is shown that using a parametric approach that includes terms proportional to the known experimental uncertainty, the reflection intensity and the squared reflection intensity to improve the error estimates can allow SAD phasing even from weak zinc anomalous signal.

59 BASIC BIOLOGICAL SCIENCES↗

IAEA Coordinated Research Project on HTGR Physics, Thermal Hydraulics, and Depletion Uncertainty Analysis: PHISICS/RELAP5-3D Results for the Phase III Coupled Core Exercises

This report details the Parallel and Highly Innovative Simulation for INL Code System (PHISICS)/Reactor Excursions and Leak Analysis Program (RELAP5)-3D results obtained for the neutronics stand-alone core exercises defined for Phase II of the International Atomic Energy Agency (IAEA) Coordinated Research Project (CRP) on high-temperature gas cooled reactor (HTGR) uncertainty analysis in modeling (UAM). The Phase II models and results are linked to the earlier Standardized Computer Analyses for Licensing Evaluation (SCALE)/Sampler/New ESC-based Weighting Transport (NEWT) data generated for the lattice physics (lattice) stage Phase I of the CRP. The focus of this report is the propagation of cross-section uncertainties from the lattice to the core calculation (core) phase of the prismatic 350 megawatt (MW) General Atomics (GA) Modular HTGR (MHTGR). The Phase II neutronics exercises consist of two sub-cases (II-2a and II-2b) specified for the fresh and mixed core loading of the MHTGR-350 prismatic high-temperature reactor design. Exercises II-2a and II-2b are performed without temperature feedback using isothermal temperature profiles. For the nominal lattice physics (i.e., best-estimate) model, a series of fresh and depleted single block and super cell SCALE/KENO and SCALE/NEWT models were developed at Idaho National Laboratory (INL) to assess the impact of spectral effects on the few-group cross sections. A combination of these lattice cells were used in a super cell calculation to construct 8-group cross-section libraries for use in the INL-developed PHISICS/RELAP5-3D code suite. The block-level homogenized libraries were assigned to the 220 fuel zones utilized in the MHTGR-350 PHISICS core model, according to the fresh and mixed fresh/depleted core loading pattern. In order to evaluate the effect of uncertainty propagation, several sets consisting of 1,000 perturbed NEWT lattice and PHISICS/RELAP5-3D core calculations were performed using the SCALE 6.2 ENDF/B-VII.1 cross-section co-variance data and the stochastic sampling module Sampler in SCALE 6.2.0. The Figures of Merit (FOM) investigated include the mean and standard deviation uncertainty values obtained for the eigenvalues, control rod worth values, block-averaged power profiles, power axial offsets, and isothermal temperature feedback coefficients. A sensitivity study on the main nuclide reaction contributors to the FOM uncertainties has not yet been performed since the SCALE/PHISICS/RAVEN coupling with ENDF/B-VII co-variance data is still being developed. It was found that uncertainties in the cross sections lead to uncertainties in the local power values of up to 1.5%. The variances between the fresh and mixed/depleted core models are not as large as the axial variations between the top and bottom within each core model. The core eigenvalue uncertainty is approximately 0.5%, which is significant in comparison to typical eigenvalue difference targets (less than ~0.1% for LWRs). The power peaking and axial offset uncertainties are smaller (0.10% – 0.15%) and probably below the level of significance in typical core design metrics. The use of an 8-group energy structure slightly under-estimates some of the uncertainties, but in absolute terms, the uncertainty results are reasonably close to the 26-group results. The 26- and 8-group mean and nominal results differ by a larger degree, and if it can be afforded in terms of calculation resources, the 26-group structure should be used for HTGR calculations. The 8-group structure can, however, still be useful for reasonably accurate uncertainty assessments of transient cases where computational time is important. It was furthermore found that the use of a super cell during the cross-section generation process for better representation of the spectral environment at the core periphery did not lead to significant changes in the core eigenvalues, axial offset, and power peaking uncertainties. The impact of the super cell cross sections on the nominal and mean eigenvalues is, however, important enough (0.6% – 1.1% lower) to justify the use of these super cells for HTGR core simulation to represent the softer spectral environment in the core peripheral regions for nominal best-estimate calculations. The use of super cells for HTGR uncertainty studies is, therefore, not strictly necessary, but the improvements in nominal results could justify their use.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Probabilistic methods for sensitivity analysis and calibration in the NASA challenge problem

In this study, a series of algorithms are proposed to address the problems in the NASA Langley Research Center Multidisciplinary Uncertainty Quantification Challenge. A Bayesian approach is employed to characterize and calibrate the epistemic parameters based on the available data, whereas a variance-based global sensitivity analysis is used to rank the epistemic and aleatory model parameters. A nested sampling of the aleatory–epistemic space is proposed to propagate uncertainties from model parameters to output quantities of interest.

97 MATHEMATICS AND COMPUTING↗