Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Position encoding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Morphological Evolution of Directional Solidification Interfaces in Microgravity: An Analysis of Model Experiments Performed on the International Space Station

A series of experiments performed using the Pore Formation and Mobility Investigation (PFMI) apparatus within the glovebox facility (GBX) on board the International Space Station (ISS) has provided video images of the morphological evolution of a three-dimensional interface in a diffusion controlled regime. The experimental samples were prepared on ground by filling glass tubes, 1 cm ID and approximately 30 cm in length, with "alloys" of succinonitrile (SCN) and water in an atmosphere of nitrogen at 450 millibar pressure. The compositions of the samples processed and analyzed are 0.25,0.5 and 1.0 wt% water. Experimental processing parameters of temperature gradient and translation speed, as well as camera settings, were remotely monitored and manipulated from the ground Telescience Center (TSC) at the Marshall !3pace Flight Center. During the experiments, the sample was first subjected to a unidirectional melt back, generally at 10 microns per second, with a constant temperature gradient ahead of the melting interface. Following the melt back, the interface was allowed to stabilize before translation is initiated. The temperatures in the sample were monitored by six in situ thermocouples and the position is monitored by an optical linear encoder. For the experiments performed and analyzed, the gradients ranged from 2.5 - 3.3 K/mm and the initial pulling velocities ranged from 0.7 micron per second to 1 micron per second with subsequent transition velocities of up to 100 microns per second. The data provided by the PFMI for analysis includes near-real-time (NRT) video captured on the ground during the experiment runs, ISS Video Tape Recorder (VTR) data dumped from the VTR at the end of the experiment run and recorded on the ground, telemetry data including temperature and position measurements, and limited flight HI-8 tapes in 2 camera views of experiment runs for which tapes have been returned to the investigators from ISS. Because of limited down mass from the ISS, the majority of the initial analysis has been performed using the NRT and VTR video data but will be supplemented with the HI-8 video as it becomes available. hardware and procedures required to prepare samples for correlation to flight samples is described. Using this ground-based system, a series of experiments have been performed for direct comparison with the flight data. The results of these comparisons as well as implications to future microgravity experiments are presented and discussed. A ground-based thin-sample directional solidification system as well as all associated

Strutzenberg, Louise L.↗
DOE OSTI2024

Scintillation event imaging with a single photon avalanche diode camera

Position and time measurements of scintillation events encode information about the radiation source. Single photon avalanche diode (SPAD) arrays offer multiple-megapixel spatial resolution and tens of picoseconds temporal resolution for detecting single photons. Current lensless designs for measuring scintillation events use sensors that are lower in spatial resolution. Camera-based designs use sensors that are lower in temporal resolution or readout rate and cannot image individual interactions. Here we propose to image scintillation events in a thick, monolithic scintillator using a high-resolution SPAD camera. We demonstrate that a commercial SPAD camera is able to gather sufficient signal to image individual scintillation events and observe 3D shifts in their spatial distribution. Simulations show that a SPAD camera can localize individual scintillation events in 3D. We report direct imaging of gamma-ray interactions in a scintillator with a SPAD camera. The proposed design may allow to measure complex signatures of individual particles interacting in the scintillator.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

WIRE SCANNER FOR HIGH INTENSITY BEAM PROFILE DIAGNOSITICS

A control and data acquisition system of a high speed wire scanner is developed for high intensity beam profile diagnostics. The control system of the wire scanner includes two IOCs, a Soft IOC and a VME IOC. The Soft IOC connects with an Aerotech Ensemble motor drive through EPCIS motor record and controls the movement of the wire scanner. An Electrical Input card samples the real-time position of the wire through an incremental encoder, and generates a pulse to synchronize a VME ADC data acquisition card, which digitizes and samples the beam-induced signal after pre-amplification. A VME Relay Output card is installed to control the Brake Solenoid and Actuator Solenoid. All the VME I/O cards are installed on one VME crate and controlled by the VME IOC. The system configuration and software of the wire scanner are under development.

Yan, J.↗
NASA NTRS1991

Calibration of the Aronson 6-DOF robotic platform

A discussion is presented of the calibration of the Aronson six-degree-of-freedom platform. Absolute encoders are used to determine the starting positions of all six joints. The hardware implemented are described in detail. Software programs are used to calibrate the hardware and to build the look-up tables that are needed in determining the initial joint positions. The descriptions of all software routines used are given.

Lin, Amy Y.↗
NASA NTRS1995

High-performance reactionless scan mechanism

A high-performance reactionless scan mirror mechanism was developed for space applications to provide thermal images of the Earth. The design incorporates a unique mechanical means of providing reactionless operation that also minimizes weight, mechanical resonance operation to minimize power, combined use of a single optical encoder to sense coarse and fine angular position, and a new kinematic mount of the mirror. A flex pivot hardware failure and current project status are discussed.

Williams, Ellen I.↗
NASA NTRS1995

Microelectronics Instrument Products Shock and Vibration Electro-Optics: Acceptance Data Package - Section B

The motor/encoder (henceforth referred to as the UUT) test sequence began with a baseline functional evaluation, which demonstrated that the motor satisfied the operating torque, cogging torque, winding resistance, and mechanical requirements of SOW. In addition, the encoder electrical requirements were verified, as well as the alignment of the encoder outputs relative to the motor shaft position. There were no discrepancies observed in this portion of the test. The UUT was then exposed to a number of environments, including thermal vacuum, thermal cycling, random and sine vibration, and mechanical shock. During the thermal environments, the performance of the UUT under load was verified at specified points in the cycles, as described in ATP 20049. In addition, the UUT was bench tested between the two thermal environments. No anomalies were observed during the thermal tests. The vibration and shock tests were performed by East-West Technology Corporation, West Babylon, New York. The UUT was delivered to the lab in a sealed vibration fixture in order to maintain the cleanliness levels required by the SOW. In addition, a three ounce load was attached to the motor shaft. The attachment method of this load caused damage to the shaft and bearing during random vibration of S/N 0003 on April 28, 1995, and is described further in NCR 00168.

Source record↗
NASA NTRS1994

Microelectronics Instrument Products Shock and Vibration Electro-optics: C-Qualification Test Report

In this test report all measurements made during testing are recorded in ATP 20049 DS data sheets and are included in the log. The motor/encoder (henceforth referred to as the UUT) test sequence began with a baseline functional evaluation, which demonstrated that the motor satisfied the operating torque, cogging torque, winding resistance, and mechanical requirements of SOW. In addition, the encoder electrical requirements were verified, as well as the alignment of the encoder outputs relative tc, the motor shaft position. There were no discrepancies observed in this portion of the test. The UUT was then exposed to a number of environments, including thermal vacuum, thermal cycling, random and sine vibration, and mechanical shock. During the thermal environments, the performance of the UUT under load was verified at specified points in the cycles, as described in ATP 20049. In addition, the UUT was bench tested between the two thermal environments. No anomalies were observed during the thermal tests. The load attachment method was subsequently corrected, and vibration of S/N 0002 began while 0003 was being repaired.

Source record↗
NASA NTRS1993

Compact Optical Correlator

Optical cross-correlator indicates position of target (if any) in scene matching target encoded in matched filter. Size reduced by use of prisms to fold optical path. Device designed, assembled from commercial components, and tested to verify feasibility of miniaturization for eventual incorporation into navigational and/or control systems of autonomous vehicles. For example, aircraft equipped with optical correlator recognizes prescribed target and measures its position, so that it lands on target under automatic control.

Scholl, Marija S.↗
NASA NTRS1980

Fiber optic sensors for measuring angular position and rotational speed

Two optical sensors, a 360 deg rotary encoder and a tachometer, were built for operation with the light source and detectors located remotely from the sensors. The source and detectors were coupled to the passive sensing heads through 3.65 meter fiber optic cables. The rotary encoder and tachometer were subjected to limited environmental testing. They were installed on an air breathing engine during recent altitude tests. Over 100 hours of engine operation were accumulated without any failure of either device.

Baumbick, R. J.↗
NASA NTRSDate not supplied

Maize Rough Endosperm6 (rgh6) Encodes A Predicted Dead-Box RNA Helicase and Affects Mirna Processing in Endosperm Development

Maize rough endosperm (rgh) mutants have defective kernels with a rough, etched, or pitted endosperm surface. Molecular genetic analysis of this mutant class has identified multiple RNA processing proteins critical to endosperm development. Here, we report on the developmental and molecular function of the rgh6 locus. The rgh6 mutant was isolated from the UniformMu transposon tagging population. Mutant kernels have reduced endosperm size and defective embryos that develop in a more apical position than typical for defective embryos. TB translocation crosses revealed that rgh6 mutant endosperm inhibits normal embryo development. Positional cloning of the rgh6 locus found that it encodes a predicted DEAD-box RNA helicase. Consistent with a predicted function for RNA processing, transient expression of a RGH6-GFP fusion protein is localized to nucleolus and nuclear speckles in Nicotiana benthamiana leaves. Rgh6 transcripts are highly expressed in endosperm epidermal cell types such as the aleurone, basal endosperm cell layer, embryo surrounding region, and endosperm adjacent to scutellum. Markers of these cell types show increased levels in rgh6 mutant kernels. Mutant endosperm tissues have increased precursor microRNA (pre-miRNA) and decreased mature miRNA relative to normal sibling endosperm, indicating that rgh6 is required for miRNA processing. The transcript levels for most miRNA target genes accumulate to a higher level in rgh6 mutant tissue. These results suggest that miRNA processing and regulation of miRNA target genes are required for normal endosperm development.

Plant Sciences↗
DOE OSTI2022

Molecular dissection of the glutamine synthetase-GlnR nitrogen regulatory circuitry in Gram-positive bacteria

How bacteria sense and respond to nitrogen levels are central questions in microbial physiology. In Gram-positive bacteria, nitrogen homeostasis is controlled by an operon encoding glutamine synthetase (GS), a dodecameric machine that assimilates ammonium into glutamine, and the GlnR repressor. GlnR detects nitrogen excess indirectly by binding glutamine-feedback-inhibited-GS (FBI-GS), which activates its transcription-repression function. The molecular mechanisms behind this regulatory circuitry, however, are unknown. Here we describe biochemical and structural analyses of GS and FBI-GS-GlnR complexes from pathogenic and non-pathogenic Gram-positive bacteria. The structures show FBI-GS binds the GlnR C-terminal domain within its active-site cavity, juxtaposing two GlnR monomers to form a DNA-binding-competent GlnR dimer. The FBI-GS-GlnR interaction stabilizes the inactive GS conformation. Strikingly, this interaction also favors a remarkable dodecamer to tetradecamer transition in some GS, breaking the paradigm that all bacterial GS are dodecamers. These data thus unveil unique structural mechanisms of transcription and enzymatic regulation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Towards physics-informed explainable machine learning and causal models for materials research

From emergent material descriptions to estimation of properties stemming from structures to optimization of process parameters for achieving best performance – all key facets of materials science and related fields have experienced tremendous growth with the introduction of data-driven models. This gradual progression goes at par with developments of machine learning workflows, from purely data-driven shallow models to those that are well-capable in encoding more complex graphs, symbolic representations, invariances, and positional embeddings. Furthermore, this perspective aims at summarizing strategic aspects of such transitions while providing insights into the requirements of bringing in explainable, interpretable predictive models, and causal learning to aid in materials design and discovery. Although the focus remains on a variety of functional materials by providing a handful of case studies, the applications of such integrated methodologies are universal to facilitate fundamental understandings of materials physics while enabling autonomous experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Microbial drivers of methane emissions from unrestored industrial salt ponds

Wetlands are important carbon (C) sinks, yet many have been destroyed and converted to other uses over the past few centuries, including industrial salt making. A renewed focus on wetland ecosystem services (e.g., flood control, and habitat) has resulted in numerous restoration efforts whose effect on microbial communities is largely unexplored. We investigated the impact of restoration on microbial community composition, metabolic functional potential, and methane flux by analyzing sediment cores from two unrestored former industrial salt ponds, a restored former industrial salt pond, and a reference wetland. We observed elevated methane emissions from unrestored salt ponds compared to the restored and reference wetlands, which was positively correlated with salinity and sulfate across all samples. 16S rRNA gene amplicon and shotgun metagenomic data revealed that the restored salt pond harbored communities more phylogenetically and functionally similar to the reference wetland than to unrestored ponds. Archaeal methanogenesis genes were positively correlated with methane flux, as were genes encoding enzymes for bacterial methylphosphonate degradation, suggesting methane is generated both from bacterial methylphosphonate degradation and archaeal methanogenesis in these sites. These observations demonstrate that restoration effectively converted industrial salt pond microbial communities back to compositions more similar to reference wetlands and lowered salinities, sulfate concentrations, and methane emissions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Polar algae flaunt their zinc assets

Metal ions have been at the centre of pivotal points in the evolution of extant life. Oxygen-evolving photosynthesis, which irrevocably reshaped the geochemistry and biology of our planet, has an absolute requirement for metal ions to harvest light, split water and transfer electrons. Access to abundant oxygen then led to the propagation of organisms capable of oxidative metabolism, a process that is also dependent on metal ions for electron transfer and reduction of molecular oxygen. Because of the essential links between metal ions and the proteins that require them to function, as well as changes in metal bioavailability through time, metals have shaped the trajectories that evolution can take. Iron typically steals this show, but with access to whole-genome sequences and transcriptomes, the imprint that zinc has made on biology is coming into focus. Writing in Nature Ecology & Evolution, Ye and colleagues present new insights into the complex connections between zinc bioavailability, adaptation of algae to the polar oceans and the evolution of regulatory networks. By combining field and laboratory-based analyses, the authors suggest that expanded families of zinc-binding proteins have enabled the green alga Microglena sp. YARC to flourish in the harsh conditions of the polar Southern Ocean (Fig. 1). As the waters where this alga occurs are known for their enrichment of zinc, the authors further propose that availability of this metal ion was directly responsible for successful microalgal colonization of polar oceans. To test this hypothesis, the authors compare meta-transcriptomes collected from pole-to-pole and find positive correlations between higher copy numbers for transcripts encoding putative zinc-binding proteins, higher latitudes, lower surface temperatures and dissolved zinc.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Neurospora intermedia from a traditional fermented food enables waste-to-food conversion

AbstractFungal fermentation of food and agricultural by-products holds promise for improving food sustainability and security. However, the molecular basis of fungal waste-to-food upcycling remains poorly understood. Here we use a multi-omics approach to characterize oncom, a fermented food traditionally produced from soymilk by-products in Java, Indonesia. Metagenomic sequencing of samples from small-scale producers in Western Java indicated that the fungus Neurospora intermedia dominates oncom. Further transcriptomic, metabolomic and phylogenomic analysis revealed that oncom-derived N. intermedia utilizes pectin and cellulose degradation during fermentation and belongs to a genetically distinct subpopulation associated with human-generated by-products. Finally, we found that N. intermedia grew on diverse by-products such as fruit and vegetable pomace and plant-based milk waste, did not encode mycotoxins, and could create foods that were positively perceived by consumers outside Indonesia. These results showcase the traditional significance and future potential of fungal fermentation for creating delicious and nutritious foods from readily available by-products.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1987

A modern control theory based algorithm for control of the NASA/JPL 70-meter antenna axis servos

A digital computer-based state variable controller was designed and applied to the 70-m antenna axis servos. The general equations and structure of the algorithm and provisions for alternate position error feedback modes to accommodate intertarget slew, encoder referenced tracking, and precision tracking modes are descibed. Development of the discrete time domain control model and computation of estimator and control gain parameters based on closed loop pole placement criteria are discussed. The new algorithm was successfully implemented and tested in the 70-m antenna at Deep Space Network station 63 in Spain.

Hill, R. E.↗
NASA NTRS1989

Performance of Lempel-Ziv compressors with deferred innovation

The noiseless data-compression algorithms introduced by Lempel and Ziv (LZ) parse an input data string into successive substrings each consisting of two parts: The citation, which is the longest prefix that has appeared earlier in the input, and the innovation, which is the symbol immediately following the citation. In extremal versions of the LZ algorithm the citation may have begun anywhere in the input; in incremental versions it must have begun at a previous parse position. Originally the citation and the innovation were encoded, either individually or jointly, into an output word to be transmitted or stored. Subsequently, it was speculated that the cost of this encoding may be excessively high because the innovation contributes roughly 1g(A) bits, where A is the size of the input alphabet, regardless of the compressibility of the source. To remedy this excess, it was suggested to store the parsed substring as usual, but encoding for output only the citation, leaving the innovation to be encoded as the first symbol of the next substring. Being thus included in the next substring, the innovation can participate in whatever compression that substring enjoys. This strategy is called deferred innovation. It is exemplified in the algorithm described by Welch and implemented in the C program compress that has widely displaced adaptive Huffman coding (compact) as a UNIX system utility. The excessive expansion is explained, an implicit warning is given against using the deferred innovation compressors on nearly incompressible data.

Cohn, Martin↗
NASA NTRS1990

A single-axis testbed for slewing control experiments

A simple single-axis testbed is described, and initial experimental results are presented to illustrate collocated and noncollocated control for this structure. The testbed is made up of a pair of single-axis flexible beams attached to a DC servo motor. An optical encoder and strain gauges provide hub and beam position information, respectively. The system is driven by an IBM PC system; with a motor controller, a programmable digital filter processes position error information through user-selected gains and pole-zero configurations. A 25-kHz data acquisition system provides the necessary interface between processor and motor. The control approaches currently being investigated include collocated PD control and noncollocated phase compensation.

Hamilton, Jonathan↗