Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pore volume”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Enhanced CO 2 Adsorption Capacity in Highly Porous Carbon Materials Derived from Melamine-Formaldehyde Resin

Here, the present study explores the synthesis of N-doped carbon materials with large surface porosity using commercial melamine-formaldehyde resin as the precursor and KOH as the activator. The resin was carbonized first and then activated by KOH with varying KOH amount and activation temperature. Notably, the as-obtained sorbents display advanced porosity with the highest surface area and pore volume of 1591 m 2 /g and 0.74 cm 3 /g, respectively, along with high N content ranging from 6.43 to 18.34 wt %. Remarkably, maximum CO 2 capture amounts of 5.42 and 3.52 mmol/g were accomplished at 0 and 25 degrees C, 1 bar for as-synthesized carbons. Systematic studies point out that narrow microporosity is the major factor determining the CO 2 uptake of these carbons under ambient pressure. Furthermore, these sorbents display notable CO 2 selectivity, rapid adsorption kinetics, moderate heat of adsorption, substantial dynamic CO 2 capture capacity, and stable recyclability. These results underscore the potential of melamine-formaldehyde resin-derived N-doped porous carbon as an efficient and versatile adsorbent for CO 2 capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Unsteady- and Steady-State Relative Permeability Study with X-ray and Acoustic Monitoring for CO 2 Storage in Deep Saline Aquifers

In this study, we link the multiphase flow measurements with controls of sedimentary structures (e.g., heterogeneity and anisotropy) on relative permeability to variations in ultrasonic velocities for two deep saline aquifer formations (Entrada and Bluff Sandstones) in the San Juan Basin of the Southwestern USA. The rock specimens were extracted from outcrop sites near Durango, CO, USA. They have distinct differences in grain size, cementation composition, and individual chemical amounts, despite both formations being eolian sandstones. We performed a series of unsteady- and steady-state CO 2 -brine relative permeability experiments under capillary-controlled displacement rates. Unsteady-state experiments were conducted at 71 °C and 9.65 MPa; steady-state experiments were conducted at 85 °C and 22.8 MPa and 89 °C and 24.1 MPa for the Bluff and Entrada Sandstones, respectively. During the unsteady experiments, X-ray computed tomography was used to visualize multiphase flow in porous media and quantify saturations during brine drainage under various flow rates. Scan images and saturation profiles indicate that the CO 2 distribution in the pore volume was strongly impacted by the presence of high-angle cross-laminations, heterogeneous rock structure, and direction of bedding orientation. Those factors contribute to dramatic and quick initial breakthroughs and affect the overall saturation dynamics. Steady-state relative permeability tests were conducted at net flow rates of 1 mL/min for both brine drainage and imbibition. During the experimental steps, the CO 2 fractional flow was increased and decreased for both drainage and imbibition scenarios to mimic the front when CO 2 contacts brine and behind the front when brine enters space previously occupied by CO 2 . It was found that compressional velocity decreased, while shear waves slightly increased as brine saturation decreased. The hysteresis effects for the relative permeability and acoustic velocities were distinct. Furthermore, the CO 2 /brine front stability is quantified by applying a mobility ratio approach to spot saturations at which the boundary line between fluids becomes uneven. The results presented in this work can potentially boost the quality and precision of forecasts for the CO 2 storage projects in which the vertical and horizontal core-scale heterogeneity and anisotropy impact the plume migration within host reservoirs.

carbon dioxide (CO2)↗
DOE OSTI2025

Equilibrium Separation of Siloxanes in Metal–Organic Frameworks

We present an in silico assessment of metal–organic frameworks (MOFs) for the equilibrium separation of linear and cyclic siloxanes. Using a combination of configurational bias/continuous fractional component Monte Carlo (CB/CFCMC) simulations and Ideal Adsorbed Solution Theory (IAST), we investigated the adsorption of both equimolar and nonequimolar mixtures of linear and cyclic siloxanes in a selection of synthesizable MOFs with medium to large pore volumes. We showed that configurational entropy effects drive the preferential adsorption of linear siloxanes over cyclic siloxanes. Based on synthesizability metrics we identified ZIF-70 as a promising adsorbent for the separation of linear and cyclic siloxanes. Self-diffusivities of linear and cyclic siloxanes in ZIF-70 calculated from molecular dynamics simulations show that equilibrium can be reached on reasonable time scales. We explored vacuum-temperature swing adsorption (VTSA) as a potential method for the recovery of adsorbed linear siloxanes from ZIF-70, achieving a 75% reduction in adsorbed phase concentration. Additionally, we demonstrated that supercritical CO 2 offers an alternative desorption strategy by displacing adsorbed linear siloxanes in ZIF-70 at pressures above 200 bar driven by entropy effects.

Adsorption↗
DOE OSTI2024

Tailoring Nanoporous Silica and Natural Straw Structural Insulation Composites

Nanoporous silica exhibits ultralow thermal conductivity as a result of its nanoscale pore size, high pore volume, and specific surface area. In this study, we report the self-assembled surfactant-templated synthesis of nanoporous silica, which is integrated with cellulose fibers derived from natural straw to manufacture high thermal insulation and mechanically robust nanocomposites. The nanocomposite shows a low thermal conductivity of 22.5 mW/(m·K), a compressive modulus of 0.93 MPa, and a hydrophobicity with a water contact angle of 125°. Moreover, we observed a marked reduction in water absorption capacity and a carbon footprint of 0.21 kg CO 2 equiv/kg. Here, this study provides a pathway toward the development of nanoporous structural insulation materials for energy-efficient building applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Rational Construction of Porous Metal–Organic Frameworks for Uranium(VI) Extraction: The Strong Periodic Tendency with a Metal Node

Although metal-organic frameworks (MOFs) have been reported as important porous materials for the potential utility in metal ion separation, coordinating the functionality, structure, and component of MOFs remains a great challenge. Herein, a series of anionic rare earth MOFs (RE-MOFs) were synthesized via a solvothermal template reaction and for the first time explored for uranium(VI) capture from an acidic medium. The unusually high extraction capacity of UO2 2 + (e.g., 538 mg U per g of Y-MOF) was achieved through ion-exchange with the concomitant release of Me 2 NH 2 + , during which the uranium(VI) extraction in the series of isostructural RE-MOFs was found to be highly sensitive to the ionic radii of the metal nodes. That is, the uranium(VI) adsorption capacities continuously increased as the ionic radii decreased. Finally, in-depth mechanism insight was obtained from molecular dynamics simulations, suggesting that both the accessible pore volume of the MOFs and hydrogen-bonding interactions contribute to the strong periodic tendency of uranium(VI) extraction.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Iridium-Doped Nanosized Zn–Al Layered Double Hydroxides as Efficient Water Oxidation Catalysts

Layered double hydroxides (LDHs) are an ideal platform to host catalytic metal centers for water oxidation (WO) owing to the high accessibility of water to the interlayer region, which makes all centers potentially reachable and activated. In this paper, we report the syntheses of three iridium-doped zinc–aluminum LDHs (Ir-LDHs) nanomaterials (1–3, with about 80 nm of planar size and a thickness of 8 nm as derived by field emission scanning electron microscopy and powder X-ray diffraction studies, respectively), carried out in the confined aqueous environment of reverse micelles, through a very simple and versatile procedure. These materials exhibit excellent catalytic performances in WO driven by NaIO 4 at neutral pH and 25 °C, with an iridium content as low as 0.5 mol % (~0.8 wt %), leading to quantitative oxygen yields (based on utilized NaIO 4 , turnover number up to ~10,000). Nanomaterials 1–3 display the highest ever reported turnover frequency values (up to 402 min –1 ) for any heterogeneous and heterogenized catalyst, comparable only to those of the most efficient molecular iridium catalysts, tested under similar reaction conditions. The boost in activity can be traced to the increased surface area and pore volume (>5 times and 1 order of magnitude, respectively, higher than those of micrometric materials of size 0.3–1 μm) estimated for the nanosized particles, which guarantee higher noble metal accessibility. X-ray absorption spectroscopy (XAS) studies suggest that 1–3 nanomaterials, as-prepared and after catalysis, contain a mixture of isolated, single octahedral Ir(III) sites, with no evidence of Ir–Ir scattering from second-nearest neighbors, excluding the presence of IrO 2 nanoparticles. The combination of the results obtained from XAS, elemental analysis, and ionic chromatography strongly suggests that iridium is embedded in the brucite-like structure of LDHs, having four hydroxyls and two chlorides as first neighbors. These results demonstrate that nanometric LDHs can be successfully exploited to engineer efficient WOCs, minimizing the amount of iridium used, consistent with the principle of the noble-metal atom economy.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Multifunctional two-dimensional metal-organic frameworks for radionuclide sequestration and detection

Two lanthanide containing porous coordination polymers, [Ln2(bpdc)6(phen)2] · nH2O (1) and [Ln2(bpdc)6(terpy)2] · 3H2O (2) (Ln = either Pr, Nd or Sm-Dy); bpdc: 2,2'-bipyridine-5,5'-dicarboxylic acid, phen: 1,10-phenanthroline, and terpy: 2,2':6',2''-terpyridine, have been hydrothermally synthesized and structurally characterized by powder and single crystal X-ray diffraction. The crystallographic analyses reveal compounds 1 and 2 feature Ln3+ containing dimeric nodes that form a porous two-dimensional (2D) and non-porous three-dimensional (3D) framework, respectively. Each material is stable in aqueous media between pH 3-10 and exhibits modest thermal stability to ~400ºC. Notably, a portion of the phen and bpdc ligands in 1 can be removed thermally, without compromising the crystal structure, causing the surface area and pore volume to increase. The optical properties of 1 and 2 with Gd3+, Sm3+, Tb3+, and Eu3+ were explored in the solid-state using absorbance, fluorescence, and lifetime spectroscopies. The analyses reveal a complex blend of metal and ligand emission in the materials containing Sm3+ and Tb3+, while those featuring Eu3+ are dominated by intense metal-based emission. Compound 1 with Eu3+ displayed promise for the capture and detection of the uranyl cation, (UO2)2+, from aqueous media. In short, uranyl capture was observed at pH 4 and the adsorption thereof was detectable via vibrational and fluorescence spectroscopies and colorimetrically as the off-white color of 1 turned yellow with uptake. Finally, both 1 and 2 with Eu3+ produce bright red emission upon irradiation with Cu ka X-ray radiation (8.04 keV) and are candidate materials for applications in solid-state scintillation.

Surbella, Robert G.↗
DOE OSTI2020

Metal–Organic Framework-Based Microfluidic Impedance Sensor Platform for Ultrasensitive Detection of Perfluorooctanesulfonate

The growing global concerns to public health from human exposure to perfluorooctanesulfonate (PFOS) requires rapid, sensitive, in-situ detection where current, state-of-the-art techniques are yet to adequately meet sensitivity and selectivity standards of the real-world. This work presents, for the first time, a synergistic approach for the targeted affinity-based capture of PFOS using a porous sorbent probe that enhances detection sensitivity by embedding it on a microfluidic conductive platform. This novel sorbent-containing platform functions as an electrochemical sensor to directly measure PFOS concentration through a proportional change in electrical response (increase in impedance). The extremely high surface area and pore volume of mesoporous metal-organic framework (MOF) Cr-MIL-101 is used as the probe for targeted PFOS capture based on the affinity of the chromium center towards both the fluorine tail groups as well as the sulfonate functionalities as demonstrated by spectroscopic (NMR and XPS) and microscopic (TEM) studies. Answering the need for an ultrasensitive PFOS detection technique, we are embedding these MOF capture probes inside a microfluidic channel, sandwiched between interdigitated microelectrodes (IDµE). The nanoporous geometry increases the signal to noise ratio of interdigitated microelectrodes tremendously increasing sensitivity; this in combination with the ability of the capture probes to interact with the PFOS at the molecular level and effectively transduce that response electrochemically has allowed us achieve a PFOS detection limit of 0.5 ng/L, which is unprecedented for in-situ analytical PFOS sensors and even comparable to quantification limits achieved using state-of-the-art ex situ techniques.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Selective Oxidative Coupling of Amines Using Mesoporous MoO x Catalysts

In this paper, we report a synthesis method for highly porous molybdenum oxide via molybdenum-oxo cluster formation under acidic conditions providing extraordinary stability. Synthesized materials indicate higher valences of molybdenum as compared to the commercial standards as verified through X-ray photoelectron spectroscopy, electron paramagnetic resonance spectroscopy, and ultraviolet–visible spectroscopy. The formation of a 91% orthorhombic molybdenum oxide bulk structure was verified through powder X-ray diffraction analysis. The effect of the hydrogen peroxide solvent system was optimized to obtain pore diameters as big as 17.4 nm and pore volumes as high as 0.168 cm 3 /g. These materials serve as great catalysts providing excellent yields of imine via amine coupling, having first-order kinetics with a turnover number as good as 27.93 with a slight decrease to 22.04 even after the fourth cycles. Surface hydroxyl species on the catalyst aid in the solid acid catalysis to jump-start the reaction.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Nanoengineering Porous Silica for Thermal Management

Thermal insulation of solid materials originates from the nanoscale porous architectures to regulate thermal management in energy-critical applications from energy-efficient buildings to heat-sensitive energy devices. Here, we show nanoengineering of porous silica materials to control the architecture transition from mesoporous to nanocage networks. A low thermal conductivity of such a porous silica network is achieved at 0.018 W/(m K) while exhibiting a porosity of 92.05%, specific surface area of 504 m 2 /g, and pore volume of 2.37 cm 3 /g after ambient pressure drying. Meanwhile, the crosslinking of the porous silica and ceramic fiber frameworks show a tensile Young’s modulus of 2.8 MPa while maintaining high thermal insulation, which provides an effective thermal runway mitigation strategy for rechargeable lithium-ion batteries. Furthermore, the nanoengineering strategy reported here would shed light on achieving superthermal insulation of nanostructures for energy-critical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Solvent-Treated Zirconium-Based Nanoporous UiO-66 Metal–Organic Frameworks for Enhanced CO 2 Capture

Metal–organic framework (MOF)-derived nanoscale porous materials are widely deployed in carbon capture, but the CO 2 capacity is varied by different post-treatments, and its mechanism is still unclear. In this work, we prepared UiO-66 and treated it with methanol solvent and thermal activation approaches, which showed ~3 times enhanced CO 2 capacities from 15.1 to 45.0 mg/g and excellent recyclability of 10 cycles. The methanol treatment efficiently removes the residual guest molecules, including N,N-dimethylformamide, dangling organic linkers, and their derivatives, in the micropores (~0.8 nm) of UiO-66 and improves the surface area, pore volume, and void fraction to enhance the CO 2 capacity close to the ideal UiO-66 materials. The molecular dynamics simulation also proved a good linear relationship between the surface areas, void fraction, and CO 2 capacity. This work provides a deep understanding of the MOF’s activation mechanism and its applications in CO 2 capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Tunable 1D and 2D Polyacrylonitrile Nanosheet Superstructures

Carbon superstructures are widely applied in energy and environment-related areas. Among them, the flower-like polyacrylonitrile (PAN)-derived carbon materials have shown great promise due to their high surface area, large pore volume, and improved mass transport. In this work, we report a versatile and straightforward method for synthesizing one-dimensional (1D) nanostructured fibers and two-dimensional (2D) nanostructured thin films based on flower-like PAN chemistry by taking advantage of the nucleation and growth behavior of PAN. The resulting nanofibers and thin films exhibited distinct morphologies with intersecting PAN nanosheets, which formed through rapid nucleation on existing PAN. We further constructed a variety of hierarchical PAN superstructures based on different templates, solvents, and concentrations. These PAN nanosheet superstructures can be readily converted to carbon superstructures. As a demonstration, the nanostructured thin film exhibited a contact angle of ~180° after surface modification with fluoroalkyl monolayers, which is attributed to high surface roughness enabled by the nanosheet assemblies. In conclusion, this study offers a strategy for the synthesis of nanostructured carbon materials for various applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Capacitive Deionization for the Extraction and Recovery of Butyrate

Separation processes underpin chemical manufacturing, energy and fuel production, resource recovery, and water purification. Capacitive deionization (CDI) is an electrochemical separation technique based on electrosorption of charged species from an aqueous solution. This work reports the development and application of CDI for the extraction and recovery of butyrate, a carboxylate anion that is key to bioenergy production, among other applications. Electrosorption of sodium butyrate was evaluated using a bench-scale CDI system with activated carbon cloth electrodes. Applying an external potential (1.2 V) enhanced the adsorption capacity of activated carbon for butyrate by 250%. Reversible electrosorption was also demonstrated by extracting and recovering butyrate at 1.2 and 0 V, respectively. Performance metrics including butyrate adsorption and desorption capacities, adsorption and desorption rates, charge efficiency, energy consumption, and recovery are reported. Furthermore, this study also investigates the long-term operational stability of the system by cycling the cell more than 1000 times using 1.2 and 0 V for charging and discharging, respectively. Subsequent physicochemical characterization indicates increased oxygen content (from similar to 2% to >8%), decreased specific surface area (by similar to 20%), and decreased pore volume (by similar to 20%), attributed to carbon oxidation. Overall, this work informs the design of CDI for organic anion separation and recovery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Design Principles for Using Amphiphilic Polymers To Create Microporous Water

Aqueous dispersions of microporous nanocrystals with dry, gas-accessible pores—referred to as “microporous water”—enable high densities of gas molecules to be transported through water. For many applications of microporous water, generalizable strategies are required to functionalize the external surface of microporous particles to control their dispersibility, stability, and interactions with other solution-phase components—including catalysts, proteins, and cells—while retaining as much of their internal pore volume as possible. Here, in this work, we establish design principles for the noncovalent surface functionalization of hydrophobic metal–organic frameworks with amphiphilic polymers that render the particles dispersible in water and enhance their hydrolytic stability. Specifically, we show that block co-polymers with persistence lengths that exceed the micropore aperture size of zeolitic imidazolate frameworks (ZIFs) can dramatically enhance ZIF particle dispersibility and stability while preserving porosity and >80% of the theoretical O 2 carrying capacity. Moreover, enhancements in hydrolytic stability are greatest when the polymer can form strong bonds to exposed metal sites on the external particle surface. More broadly, our insights provide guidelines for controlling the interface between polymers and metal–organic framework particles in aqueous environments to augment the properties of microporous water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Adsorption of Natural Gas in Metal–Organic Frameworks: Selectivity, Cyclability, and Comparison to Methane Adsorption

Evaluation of metal–organic frameworks (MOFs) for adsorbed natural gas (ANG) technology employs pure methane as a surrogate for natural gas (NG). This approximation is problematic, as it ignores the impact of other heavier hydrocarbons present in NG, such as ethane and propane, which generally have more favorable adsorption interactions with MOFs compared to methane. Herein, using quantitative Raman spectroscopic analysis and Monte Carlo calculations, we demonstrate the adsorption selectivity of high-performing MOFs, such as MOF-5, MOF-177, and SNU-70, for a methane and ethane mixture (95:5) that mimics the composition of NG. The impact of selectivity on the storage and deliverable capacities of these adsorbents during successive cycles of adsorption and desorption, simulating the filling and emptying of an ANG tank, is also demonstrated. Finally, the study reveals a gradual reduction in the storage performance of MOFs, particularly with smaller pore volumes, due to ethane accumulation over long-term cycling, until a steady state is reached with substantially degraded storage performance.

03 NATURAL GAS↗
DOE OSTI2024

Node Distortions in UiO-66 Inform Negative Thermal Expansion Mechanisms: Kinetic Effects, Frustration, and Lattice Hysteresis

In metal–organic frameworks (MOFs) the interplay between the dynamics of individual components and how these are constrained by the extended lattice can yield unusual emergent phenomena. For the archetypal Zr-MOF, UiO-66, we explore the cooperative dynamics of a Zr-node transformation that gives rise to negative thermal expansion (NTE). Here, using in situ synchrotron X-ray scattering, with powder diffraction and pair distribution function (PDF) analyses, we identify lattice hysteresis and a thermal ramp-rate-dependence of the thermal expansion. Specifically, kinetic trapping of distorted node states formed at high temperature, leads to broad variability in the apparent thermal expansion which ranges from large positive to large negative thermal expansion with coefficients of thermal expansion (CTE) from +45 to –80 × 10 –6 K –1 . Time-resolved relaxation studies at selected temperatures suggest that when equilibrated UiO-66 is intrinsically NTE, with a CTE of –35 × 10 –6 K –1 . Kinetic trapping of the node-distorted state following high temperature activation has broad implications for characterization and applications of these Zr-MOFs; the nonequilibrium node state depends on the thermal history of the sample with quench vs slow cooling likely to impact gas binding, pore volume, and accessible catalytic sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Chemo‐mechanical Alterations Induced From CO 2 Injection in Carbonate‐Cemented Sandstone: An Experimental Study at 71 °C and 29 MPa

Abstract Carbon capture, utilization, and storage may lead to mechanical degradation of the subsurface reservoir from fluid‐rock interaction, which could lead to wellbore instability or reservoir compaction. To better understand potential relationship between mechanical degradation with various carbonate cement textures and compositions in sandstone reservoirs, six flow‐through experiments were conducted. Formation water (TDS = 5,390 mg/L) enriched with CO 2 flowed through two types of Pennsylvanian Morrow B Sandstone: an ankerite‐siderite‐cemented sandstone (disseminated cement texture) and a calcite‐cemented sandstone (poikilotopic cement texture). The experiments produced little change in permeability in the ankerite‐siderite‐cemented sandstone, but permeability increased up to more than 1 order of magnitude in the calcite‐cemented sandstone. Ultrasonic measurements and cylinder‐splitting tests (also known as Brazilian tests) suggested negligible mechanical degradation of the ankerite‐siderite‐cemented sandstone. Variable changes, with significant mechanical degradation in the static moduli, were observed in the calcite‐cemented sandstone. Thus, dissolution of the disseminated ankerite‐siderite cement (0.28–0.30%) had minimal impact on modifying the flow network and the mechanical integrity of the sandstone, whereas dissolution of the poikilotopic calcite cement (0.89–1.13%, quantified with fluid chemistry and visualized with X‐ray microcomputed tomography) impacted the mechanical strength of the sandstone by disconnecting framework grains. With the high water‐to‐rock mass ratios (7.3–8.2) and number of pore volumes (147–675) employed in these experiments, potential risks are most relevant to regions near injection wells. Ultimately, the chemo‐mechanical effects induced by CO 2 injection are strongly influenced by the cement texture and composition and the burial history of the reservoir rock.

Wu, Z.↗
DOE OSTI2024

Permeability and Induced Polarization of Mudstones

Electrical measurements can be used to estimate hydraulic properties such as permeability ( k ) in sedimentary rocks. Previous work has focused on sandstones, siltstones, and carbonates, while investigations on mudstones have rarely been reported. In this study, we report on electrical geophysical measurements for 23 mudstone samples using an experimental approach designed to reliably saturate these low permeability mudstones. The modified Hagen-Poiseuille model linking permeability to the formation factor ( F ) and an effective pore radius ( r ) provides an excellent fit to the data set with a near-constant pore radius, indicating that the effective porosity (1/ F ) is the controlling factor on k . In these samples, the surface area normalized to pore volume ( S por ), frequently used in permeability estimation models, varies by 1–2 orders of magnitude and is thus not a reliable proxy of the inverse effective hydraulic radius. The formation factor also exerts the primary control on induced polarization (IP) parameters, whereas Spor shows no relation to the IP parameters. A strong linear relationship is found between IP parameters (imaginary conductivity and normalized chargeability) and surface conductivity, although the proportionality factor is significantly lower than those observed in more permeable rocks and sediments. Apparent relationships between the polarization strength-derived and time constant-derived geophysical length scales and the effective hydraulic radius appear to be driven by variations in the electrochemical parameters (i.e., specific polarizability and diffusion coefficient). Overall, these findings emphasize that predicting hydraulic properties from electrical measurements in fine-grained rocks remains challenging and requires further investigation into the electrochemical properties involved.

58 GEOSCIENCES↗