Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Plutonium metal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

SCALE 6.2.4 Validation: Nuclear Criticality Safety

The computational bias of criticality safety computer codes must be established through the validation of the codes to critical experiments. A large collection of suitable experiments has been vetted by the International Criticality Safety Benchmark Evaluation Project (ICSBEP) and made available in the International Handbook of Evaluated Criticality Safety Benchmark Experiments (ICSBEP Handbook). More than 600 cases from this handbook have been prepared and reviewed within the Verified, Archived Library of Inputs and Data (VALID), which is maintained by the Reactor and Nuclear Systems Division at Oak Ridge National Laboratory. The performance of the KENO V.a and KENO-VI Monte Carlo codes within the SCALE 6.2.4 code system is assessed using the VALID models of benchmark experiments. A range of nuclear cross section libraries based on Evaluated Nuclear Data File (ENDF)/B-VII.1 in both multigroup (MG) and continuous energy (CE) formats is considered. The critical experiments available to validate the KENO V.a code cover 15 broad categories of systems. These systems use a range of fissile materials, including a range of uranium enrichments, various plutonium isotopic vectors, and some mixed uranium/plutonium oxides. The physical forms of the fissile material also vary and are represented as metal, solutions, or arrays of rods or plates in a water moderator. The neutron energy spectra of the systems also vary and cover fast, intermediate, mixed, and thermal spectra. Over 550 of the total cases use the KENO V.a code for the four nuclear data libraries considered in this report.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Irradiation Impact on Uranium Recovery Under Direct Extraction Conditions

Reducing the quantity of high-level radioactive waste is essential for minimizing environmental impact and improving efficiency of using natural resources for nuclear power. The current standard, Plutonium Uranium Solvent EXtraction (PUREX), uses tributyl phosphate (TBP) ligands to extract complexes of uranium and plutonium from a nitric acid (HNO3) phase. Although this method is effective, large volumes of HNO3 and the non-incinerable phosphate ligands increase the amount of hazardous waste produced. Alternative extractants and flowsheets have been proposed that allow for more selective extraction of radioactive metals, reduced nitric acid use, and easier incineration by only containing carbon, hydrogen, oxygen, and nitrogen (CHON). One candidate, N,N-di(2-ethylhexyl)-isobutyramide (DEHiBA) exhibits promising properties for direct extraction. A HNO3 pre-equilibrated DEHiBA phase selectively extracts U(VI), leaving plutonium, transuranics, and fission products behind as precipitate and reducing the volume of radioactive HNO3 produced.

38 - RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCL↗
DOE OSTI2021

Experiments at TA-55 have used optical pyrometry to measure temperatures of shocked plutonium on the 40mm gun

Researchers at LANL, along with collaborators from MSTS, have worked for more than a decade to develop and implement an optical pyrometry method to measure the temperature of metals shocked to the high pressures and temperatures. Because traditional shock wave measurements only provide information on the mechanical state of the material, temperature measurements are required to validate and improve equation-of-state (EOS) models for materials. The conditions sampled are complex; commenserate with those found in planetary impacts, and accressed by conventional and nuclear weapons. Optical pyrometry is currently the best available method for inferring the temperature of shocked metals, by careful measurement of the calibrated radiance emitted by a surface at finite temperature. These measurements are difficult often complicated by the short time scales associated with shock wave experiments (<1 µs) coupled with the many sources of non-thermal light (impact flash, fracture light, etc.) that pollutes the radiant light measured from the sample.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Plutonium Oxidation State Distribution in the Presence of WIPP-Relevant Organics and Iron Corrosion Products

The oxidation state and solubility of plutonium (Pu) in high ionic strength synthetic WIPP (Waste Isolation Pilot Plant) brines as a function of pC H+ in the presence and absence of WIPP-relevant organic ligands (EDTA [Ethylenediaminetetraacetic acid], oxalate, citrate, acetate) and iron corrosion products (magnetite and metallic iron) at 𝑇 = 23 ± 2 ∘C was thoroughly studied by long-term batch solubility experiments (between approximately 800-1,100 days) from an undersaturation approach. The oxidation state of Pu in the WIPP environment has been a topic of interest since the initial Compliance Certification Application (CCA). This study aims to investigate the solubility of Pu under the expected WIPP conditions and to determine the oxidation state of the solid phase that will control the solubility. One of the most important results of this study is that the Pu oxidation state was analyzed both from the surface area of the corrosion products and in the precipitated solid. The analysis of the Pu oxidation state on the surface of the iron mineral from the ongoing undersaturated experiments is more relevant to the performance assessment of nuclear waste disposal than short term batch (plutonium-iron phase) experiments. The X-ray Absorption Near-Edge Spectroscopy (XANES) analysis showed that Pu oxidation state is different on the metal surface and in the precipitated solid. Pu(III) is the dominant oxidation state in the metallic iron (Fe 0 ) system in the presence and absence of organics. Pu(IV) is the dominant oxidation state in the magnetite system in the presence and absence of organics. Also, organics stabilize Pu(IV) in the magnetite system. Analysis of Pu in the precipitated solid by Extended X-ray Absorption Fine Structure (EXAFS) analysis showed that Pu formed an inner-sphere complex with iron with minor amounts of PuO 2 present. X-ray diffraction (XRD) results indicate that metallic iron and magnetite did not oxidize in three years in the alkaline and high ionic strength system. Under these conditions (8 < pC H+ < 10 at T = (22 ± 2) °C under nitrogen atmosphere, the solubility of Pu changes by up to three orders of magnitude (10 -5 and 10 -8 M). The spread in solubility is highest at pC H+ = 9. Pu(III) and Pu(IV) showed different solubility behavior in the synthetic WIPP brine. A summary of the data collected in this report will be submitted to Sandia National Laboratories as part of a parameter update report which will outline the changes to the OXSTAT parameter for the 2026 Compliance Recertification Application (CRA-2026). The experiments performed were done according to the U.S. Department of Energy (DOE) approved Test Plan entitled “Effects of Radiolysis, Organic Complexation, and Redox Conditions on the Speciation and Oxidation State Distribution of Pu(III/IV)” (LCO-ACP-25). All data reported were obtained under the Los Alamos National Laboratory-Carlsbad Office (LANL-CO) Quality Assurance Program, which is compliant with the DOE Carlsbad Field Office, Quality Assurance Program Document (CBFO/QAPD).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Experimental and quantum mechanical characterization of an oxygen-bridged plutonium(IV) dimer

We report the synthesis and characterization of K 4 {[PuCl 2 (NO 3 ) 3 ] 2 (μ 2 -O)}·H 2 O, which contains the first known μ 2 -oxo bridge between two Pu IV metal centers. Adding to its uniqueness is the Pu-(μ 2 -O) bond length of 2.04 Å, which is the shortest of other analogous compounds. The Pu-(μ 2 -O)-Pu bridge is characterized by the mixing of s -, d -, and p -orbitals from Pu with the p -orbitals of O; the 5 f -orbitals do not participate in bonding. Natural bond orbital analysis indicates that Pu and O interact through one 3c-2e σ Pu-O-Pu and two 3c-2e π Pu-O-Pu bonding orbitals and that the electron density is highly polarized on the μ 2 -O. Bond topology properties analysis indicates that the Pu-(μ 2 -O) bond shares both ionic and covalent character. Quantum mechanical calculations also show that the dimer has multiconfigurational ground states, where the nonet, septet, quintet, triplet, and singlet are close in energy. This work demonstrates the interplay between experimental and computational efforts that is required to understand the chemical bonding of Pu compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Impurity Levels in Cerium Oxide Microspheres Prepared by Internal Gelation Sol-Gel Methods

Impurity levels were measured in cerium oxide microspheres fabricated by modified internal gelation sol-gel methods. A combination of glow discharge mass spectrometry, electron impact mass spectrometry, combustion gas analysis and instrumental gas analysis were used to assess a wide range of potential elemental impurities. Low concentrations of carbon, nitrogen, and hydrogen impurities in microspheres showed a dependence on how microspheres were washed. Silicon impurities are believed to derive from silicone oil used during sol-gel processing. Spheres washed by the preferred approach had impurity levels below 100 ppm for all elements tested. For applications such as nuclear fuels, sol-gel methods could meet purity specifications as long as metal nitrate feed solutions of sufficient purity are used and microspheres are washed appropriately. In this study, cerium was used as a surrogate for plutonium-238, which is used in radioisotope power systems as a heat source, to determine whether carbon or other impurities were concentrated during internal gelation processing and remained after heat treatments. Analyses indicated low concentrations of impurities in cerium oxide microspheres after sintering steps that were well below documented limits for plutonium-238 oxide fuels. Modified washing methods, combined with a pressurized water treatment, resulted in sintered cerium oxide sol-gel microspheres with low impurity levels.

cerium oxide, sol-gel, internal gelation, microsph↗
DOE OSTI2022

Updated Reference VTR Core for CD-1

A preliminary reference core design was previously developed for the Versatile Test Reactor. The main features are that it is a 300 MW th sodium-cooled fast reactor using ternary metallic fuel U-20Pu-10Zr and able to achieve peak fast fluxes (E n > 0.1 MeV) in excess of 4.0x10 15 n/cm 2 -s. The plutonium in the fuel was assumed to be “reactor grade”, with a fissile quality of about 72% (i.e., 239 Pu and 241 Pu comprise 72% of the plutonium isotopes), and the uranium was assumed to be low-enriched uranium with 5% 235 U. This preliminary core design has been used through the CD-0 phase of the VTR project. Progression of the work after CD-0 led to revising, updating and refining the reference VTR core design, based on considerations from the various VTR teams: fuel, experiment, safety, and plant design teams. The objective of this report is to summarize the various changes made and details added to the model, to provide a description of the updated reference VTR core design and of its performance characteristics. This includes the traditional reactor physics characteristics, fuel cycle details, reactivity coefficients, temperature distributions, control rod worths and shutdown requirements. All of these define the updated “reference VTR core” intended to be used through CD-1.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

Characterizing the general chelating affinity of serum protein fetuin for lanthanides

Fetuin is an abundant blood protein that participates in multiple biological processes, including the transport and regulation of calcium. Fetuin is also known to have a high affinity for uranium (as the uranyl dioxo cation) and plutonium, thus it has been suggested as one of the main endogenous chelating biomolecules involved in the transport of actinides following an internal uptake event. Nevertheless, no direct measurements of its affinity for f-elements beside these two actinides have been reported. Here, we investigate the interaction between fetuin and trivalent lanthanides, such as samarium, europium, terbium, and dysprosium, by mass spectrometry and fluorescence spectroscopy. In this work, mass spectrometry results indicated that fetuin has four metal binding sites for the metal ions studied. Upon formation, the metal–protein complexes showed luminescence emission as a result of antenna sensitization of the metal ions, whose photophysics were characterized and exploited to perform direct spectrofluorimetric titrations. Furthermore, the thermodynamic constants were calculated for all complexes, confirming the formation of stable complexes with log $β^{\prime}_4$ values between 26 and 27. In characterizing the affinity of the serum protein fetuin for several f-elements, this study expands upon the initial findings focused on uranyl and plutonium, and contributes to a better understanding of the internal distribution and deposition of lanthanides, potentially representative of trivalent actinides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

In situ beam reduction of Pu(IV) and Bk(IV) as a route to trivalent transuranic coordination complexes with hydroxypyridinone chelators

The solution-state interactions of plutonium and berkelium with the octadentate chelator 3,4,3-LI(1,2-HOPO) (343-HOPO) were investigated and characterized by X-ray absorption spectroscopy, which revealed in situ reductive decomposition of the tetravalent species of both actinide metals to yield Pu(III) and Bk(III) coordination complexes. X-ray absorption near-edge structure (XANES) measurements were the first indication of in situ synchrotron redox chemistry as the Pu threshold and white-line position energies for Pu-343-HOPO were in good agreement with known diagnostic Pu(III) species, whereas Bk-343-HOPO results were found to mirror the XANES behavior of Bk(III)-DTPA. Extended X-ray absorption fine structure results revealed An—O HOPO bond distances of 2.498 (5) and 2.415 (2) Å for Pu and Bk, respectively, which match well with bond distances obtained for trivalent actinides and 343-HOPO via density functional theory calculations. Pu(III)- and Bk(III)-343-HOPO data also provide initial insight into actinide periodicity as they can be compared with previous results with Am(III)-, Cm(III)-, Cf(III)-, and Es(III)-343-HOPO, which indicate there is likely an increase in 5 f covalency and heterogeneity across the actinide series.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Two Neptunium(III) Mellitate Coordination Polymers: Completing the Series Np–Cf of Trans-Uranic An(III) Mellitates

For this work, two neptunium(III) mellitates, 237 Np 2 (mell)(H 2 O) 9 ·1.5H 2 O (Np-1α) and 237 Np 2 (mell)(H 2 O) 8 ·2H 2 O (Np-1β), have been synthesized from 237 NpCl 4 (dme) 2 by reduction with KC 8 and subsequent reaction with an aqueous solution of mellitic acid (H 6 mell). Characterization by single-crystal X-ray crystallography and UV–vis–NIR spectroscopy confirms that the neptunium is in its +3 oxidation state and both polymorphs are isostructural to the previously reported plutonium mellitates. Of the two morphologies, Np-1α is indefinitely stable in air, while Np-1β slowly oxidizes over several months. This is due to the change in the energy of the metal-ligand charge-transfer absorption exhibited by these compounds attributed to differing numbers of carboxylate bonds to Np(III), where in Np-1β the energy is low enough to result in spontaneous oxidation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

CORE DESIGN AND NEUTRONIC ANALYSIS OF THE EUROPEAN SODIUM FAST REACTOR WITH METALLIC FUEL

The current ESFR (European Sodium Fast Reactor) design was proposed and in-depth evaluated in the frame of the past ESFR-SMART project. As a follow-up project, the ESFR-SIMPLE has been launched with the aim of challenging the current commercial-size ESFR design in terms of safety features and economic performance. Among the new safety measures to be developed and assessed in ESFR-SIMPLE, the current oxide fuel ESFR design will be challenged by a modified version of the core with metallic fuel. This intends to conclude on what types of benefits can be obtained with high-density fuel, under similar safety and design constraints. In this paper, the designing approach for enabling the use of metallic fuel in the current ESFR core is described and a preliminary neutronic evaluation is carried out. The optimal configuration is established through the optimization of key neutronic parameters aiming at the potential reduction of the plutonium inventory. The resulting core configuration serves as a basis for further safety assessment analyses, which will provide insight into the advantages and drawbacks of the two types of fuels.

Jiménez-Carrascosa, Antonio↗
DOE OSTI2020

Uranium Disposition Efforts at Los Alamos National Laboratory

Summary: Doing uranium work in a plutonium facility has challenges: NDA is geared to plutonium, Pu contamination, DU discards. The future volume of the feed stream to UED is dependent on pit disassembly. The dilute and dispose Pu disposition option will cause the HEU stream to grow significantly. Shipping HEU metal directly to Y-12 is a long term goal.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Materials for Small Nuclear Reactors and Micro Reactors, Including Space Reactors

Small nuclear reactors, including small modular reactors (SMRs) or reactors for space applications, rely on different materials than those typically applied in large-scale nuclear power plants. Examples include molten salts as cooling medium or fuel carrier, metal hydrides as high-temperature moderators, and fuels allowing for higher burnup. All of these also require novel structural materials, for which material interactions have to be understood. Fissionable and fissile materials, such as uranium or plutonium, are rarely considered in materials design other than for nuclear fuels. Similarly, the aspects of radiation damage, occurring during irradiation when a reactor operates, are unique to nuclear materials research. The handling of these materials puts further limitations on the materials science conducted for nuclear materials. All of these issues move research for these materials off the “main stream” of materials science, and cause it to be more easily conducted at national laboratories. However, nuclear reactors offer unique opportunities for carbon-neutral energy generation and have great potential to address if not solve problems arising from global warming. This special topic, sponsored by the TMS Nuclear Materials Committee, focuses on materials research for small nuclear reactors, both experimental and simulation/modeling.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Hydroxypyridinone-based stabilization of Np(IV) enabling efficient U/Np/Pu separations in the Adapted PUREX process

The classical process to recover uranium (U) and plutonium (Pu) from used nuclear fuel using tributyl phosphate (TBP), namely the Plutonium Uranium Redox EXtraction (PUREX) process, is complicated by the persistent presence of neptunium (Np) and thus requires extra purification steps. The concept of Adapted PUREX seeks to achieve Np recovery by adjusting the valence of the metal more effectively, thereby controlling its behavior more precisely. This study introduces the use of an aqueous hydroxypyridinone chelator, 3,4,3-LI(1,2-HOPO) (abbreviated as HOPO), to dictate the behavior of Np for recovery and meanwhile simplify cumbersome reprocessing steps. The interactions between Np and HOPO were probed mechanistically by way of absorption spectrophotometry, in conjunction with cyclic voltammetry. UV–Vis-NIR spectra illustrated the reduction of NpO 2 2+ to Np 4+ , with a fast reaction rate. Cyclic voltammetry revealed quasi-reversible processes between the oxidized and reduced forms of the ligand and its Np complexes. The corresponding heterogeneous rate constants (k 0 ) were estimated from the peak-to-peak separation potentials (ΔE p ), at ~ 4 – 35 μm/s for both HOPO and NpHOPO, with scan rates of 0.01 – 0.4 V/s. Meanwhile, the electromotive force (E MF ) as well as the change of Gibbs free energy (ΔG) were assessed from the half-wave potential (E 1/2 ), demonstrating the completeness of NpO 2 2+ reduction to Np 4+ by HOPO. The cumulative formation constant of the resulting NpHOPO complex (logβ 101 ) was determined by metal competition titration to be 42.0 ± 0.6, corroborating the extraordinarily high affinity of HOPO to tetravalent metal ions. Here, the prowess of valence control by HOPO and the high stability of the formed complex resulted in enhanced separations of Np from U and of Pu from U, with a maximum separation factor of ~7000 for both, nearly 90- and 10300-fold higher, respectively, than the values obtained using conventional PUREX formulae.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Rapid dissolution of PuO 2 analytical samples using mediated electrochemical oxidation

Current methods for quantitative dissolution of solid PuO 2 involve lengthy dissolution times. The adaptation of mediated electrochemical oxidation, which uses an electrochemically produced oxidizing agent to catalyze dissolution, has been explored for radiochemical analysis scale dissolutions of PuO 2 . The effects of temperature, electrode material, and electrocatalyst on the dissolution kinetics were explored. Under conditions examined in this study, complete dissolution of tens of milligrams of solid PuO 2 can be achieved in less than 1 h at ambient temperature. Overall, this methodology could be adapted to dissolve other metal oxides.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Transmission Electron Microscopy Characterization of Fuel Cladding Chemical Interaction between Minor Actinides bearing U-Pu-Zr Fuel and AIM1 Cladding

Minor actinides (MA) significantly contribute to the long-term radiotoxicity of spent nuclear fuel (SNF). Separating MA from SNF and incorporating it into metallic fuels for fast reactor transmutation is a potential method to reduce this radiotoxicity. Here, this study focuses on transmission electron microscopy characterization of two samples from the fuel cladding chemical interaction (FCCI) region of an americium (Am) and neptunium (Np)-bearing (MA-bearing) uranium-plutonium-zirconium (U-Pu-Zr) fuel irradiated in the Phenix fast reactor to 9.5 % FIMA burnup at approximately 550 °C cladding temperature. The results show that despite the complex chemical interactions between MA and AIM1 cladding elements, excessive FCCI was not induced, and Am penetration depth in the cladding limited to less than 4 µm. Np remained mostly inside fuel. The Zr-rich compounds layer effectively limited the accumulation of lanthanide on the inner cladding surface. Overall, the FCCI behavior between investigated MA-bearing U-Pu-Zr fuel and AIM1 cladding is benign.

Chemical interaction↗
DOE OSTI2020

Enhanced Pu emission with solution-loaded laser ablation modified sources (SLLAMS) for thermal ionization mass spectrometry

This study presents a new approach to filament modification by laser ablation for analysis of femtograms of plutonium (Pu) by thermal ionization mass spectrometry (TIMS). This method simplifies the often rigorous and labor-intensive sample loading necessary for low-level analyses by TIMS with solution-loaded laser ablation modified sources (SLLAMS). By applying a para-film coating to the surface of the filament and then ablating through the film to reveal metal beneath, a point source is created. A solution containing ppt-levels of Pu can then be applied over the ablated region, dried slowly into the crater, and then carburized. All analyses were made by multiple ion counting system of a Nu Instruments TIMS. Furthermore, we report errors of 10% 2σ for 240 Pu/ 239 Pu of CRM-137 samples totaling 5 – 7 femtograms (fg; 1E-15 g) with an average sample utilization efficiency of 1.3%. Results from SLLAMS demonstrate an improvement in precision, accuracy and ease of use over resin bead loads.

47 OTHER INSTRUMENTATION↗