Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pileup”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Plasma and energetic electron flux variations in the Mercury 1 C event - Evidence for a magnetospheric boundary layer

Charge-particle and magnetic-field data obtained during the first encounter (on March 29, 1974) of Mariner 10 with the planet Mercury are reexamined, and a new interpretation of the Mariner 10 energetic electron, plasma electron, and magnetic field data near the outbound magnetopause at Mercury is presented. It is shown that Mariner 10 sampled the hot substorm energized magnetospheric plasma sheet for the first 36 sec of the C event and, for the next 48 sec, alternatively sampled hot (plasma sheet) and cold (boundary-layer magnetosheathlike) plasma regions. It is argued that the counting rate of the ID1 event (i.e., a particle event triggering detector D1 but not the D2, D3, or D7 detectors) throughout the C event most probably represents a pulse pileup response to about 35-175 keV electrons, rather than the nominal above-175 keV electrons presumed in the earlier interpretations.

Christon, S. P.↗

Three-dimensional driven reconnection in magnetic loops

A numerical study of reconnection in a three-dimensional axially bounded magnetic flux tube is presented. An axial magnetic field is embedded in a conducting fluid, between conducting end plates. An applied flow in the end plates causes distortion and stretching of the magnetic field in the flux tube, and the creation of current sheets. After the current sheets form, the reconnection rate is fast; with a merging rate M of about 1. The reconnection mechanism resembles flux pileup in two dimensions. It is also similar to the nonlinear behavior of a subcritically excited current-driven MHD mode. The numerical model is relevant to a mechanism thought to be important for heating the solar corona, as well as producing solar flares.

Strauss, H. R.↗

Densities and abundances of hot cometary ions in the coma of P/Halley

The densities of the hot component in the ion population observed in the P/Halley coma by the ion mass spectrometer aboard the Giotto spacecraft has been recomputed, and the results are reported. Except for protons and H2(+), all densities are found to be at least an order of magnitude higher than predicted by the physicochemical model of Schmidt et al. (1988). These densities require ionization mechanisms in addition to, or stronger than, plasma compression. The change in the density of solar wind ions across a magnetic discontinuity located 135,000 km from the comet is barely distinguishable in the density profiles of hot cometary ions. This result is consistent with the interpretation that the magnetic pileup boundary detected by Giotto is due to a discontinuity in the solar wind.

Neugebauer, M.↗

Observations of plasma dynamics in the coma of P/Halley by the Giotto ion mass spectrometer

The paper reports observations of plasma dynamics in the coma of P/Halley by the Giotto ion mass spectrometer. Measurements of protons and alpha particles from the far upstream region to the near ionopause region and of ions of mass 12-32 at distances of about 250,000 to 40,000 km from the nucleus are presented. The discontinuity known as the magnetic pileup boundary (MPB) is apparent only in proton, alpha particle, and magnetometer data, indicating that it is a tangential discontinuity of solar wind origin. No significant change is found in the properties of the heavy ions across the MPB. The issue of whether a cometopause was unambiguously observed at Comet Halley is discussed; it is concluded that the observations do not convincingly support the idea of a boundary due to internal cometary processes. A comparison of the observations to MHD models is made. The plasma flow directions at all distances greater than 30,000 km from the nucleus are in agreement with MHD calculations.

Goldstein, B. E.↗

MHD modeling of magnetotail instability for localized resistivity

We present results of a three-dimensional magnetohydrodynamic (MHD) simulation of magnetotail evolution initiated by a sudden occurrence or increase of spatially localized resistivity as the major expected concequence of some localized microinstability. Because of the absence of a quantitative model, possible variations of resistivity levels with current density, or the reduction thereof, are not incorporated in the present investigation. The emphasis of the study is on an investigation of the changes to the overall evolution brought about by this localization, in particular, on the disruption and diversion of the cross-tail current and the nonlinear evolution of the magnetotail instability. The immediate consequences of the occurrence of the localized resistance and the resulting electric field are a reduction and diversion of the electric current around the region of high resistivity, associated with an increase of B(sub z) ('dipolarization') at the earthward edge and a decrease of B(sub z) at the tailward edge of this region. These effects, however, are localized and do not involve a reduction of the total cross-tail current and hence do not lead to the global development of a 'substorm current wedge,' which includes not only the reduction of the cross-tail current but also the buildup of a global field-aligned current system of 'regional 1' type (toward the Earth on the dawnside and away on the duskside of the tail). Such signatures develop at a later time, as consequences of a three-dimensional tearing instability, which is triggered by the occurrence of the resistivity. These features are found in combination with plasmoid formation and ejection, quite similar to results of earlier simulations with uniform resistivity. Differences are found in the timescale of the evolution, which tends to be shorter for localized resistivity, and in the propagation of the dipolarization effects in the equatorial plane. Whereas for uniform resistivity the temporal increase in B(sub z) tends to propagate tailward, apparently due to a pileup effect in the near-Earth region, an earthward propagation is found for the localized resistivity. This propagation results from an earthward convection of the gradient in B(sub z), which is set up by the reconnection process further tailward.

Hesse, Michael↗

High-Performance X-ray Detection in a New Analytical Electron Microscope

X-ray detection by energy-dispersive spectrometry in the analytical electron microscope (AEM) is often limited by low collected X-ray intensity (P), modest peak-to-background (P/B) ratios, and limitations on total counting time (tau) due to specimen drift and contamination. A new AFM has been designed with maximization of P. P/B, and tau as the primary considerations. Maximization of P has been accomplished by employing a field-emission electron gun, X-ray detectors with high collection angles, high-speed beam blanking to allow only one photon into the detector at a time, and simultaneous collection from two detectors. P/B has been maximized by reducing extraneous background signals generated at the specimen holder, the polepieces and the detector collimator. The maximum practical tau has been increased by reducing specimen contamination and employing electronic drift correction. Performance improvments have been measured using the NIST standard Cr thin film. The 0-3 steradian solid angle of X-ray collection is the highest value available. The beam blanking scheme for X-ray detection provides 3-4 times greater throughput of X-rays at high count rates into a recorded spectrum than normal systems employing pulse-pileup rejection circuits. Simultaneous X-ray collection from two detectors allows the highest X-ray intensity yet recorded to be collected from the NIST Cr thin film. The measured P/B of 6300 is the highest level recorded for an AEM. In addition to collected X-ray intensity (cps/nA) and P/B measured on the standard Cr film, the product of these can be used as a figure-of-merit to evaluate instruments. Estimated minimum mass fraction (MMF) for Cr measured on the standard NIST Cr thin film is also proposed as a figure-of-merit for comparing X-ray detection in AEMs. Determinations here of the MMF of Cr detectable show at least a threefold improvement over previous instruments.

Lyman, C. E.↗

New Examination of the Raman Lidar Technique for Water Vapor and Aerosols: Evaluating the Temperature Dependent Lidar Equations - Paper 1

The intent of this paper and its companion is to compile together the essential information required for the analysis of Raman lidar water vapor and aerosol data acquired using a single laser wavelength. In this first paper several details concerning the evaluation of the lidar equation when measuring Raman scattering are considered. These details include the influence of the temperature dependence of both pure rotational and vibrational-rotational Raman scattering on the lidar profile. These are evaluated for the first time using a new form of the lidar equation. The results indicate that, for the range of temperatures encountered in the troposphere, the magnitude of the temperature dependent effect can reach 10% or more for narrowband Raman water vapor measurements. Also the calculation of atmospheric transmission is examined carefully including the effects of depolarization. Different formulations of Rayleigh cross section determination commonly used in the lidar field are compared revealing differences up to 5% among the formulations. The influence of multiple scattering on the measurement of aerosol extinction using the Raman lidar technique is considered as are several photon pulse-pileup correction techniques.

Whiteman, David N.↗

Multi-Epoch XMM Observations of NGC4258

The goal of this project was detection of variability in the X-ray absorption column of the AGN in NGC4258 through monitoring with the XMM satellite. We have accomplished this goal and submitted the results to ApJ for publication in a paper entitled, "X-ray Luminosity and Absorption Column Fluctuations in the H2O Maser Galaxy NGC4258 from Weeks to Years," by Fruscione, A., Greenhill, L.J., Filippedco, A.V., Moran, J.M., Hermstein, J.R., and Galle, E. We have received a favorable referee report and expect the article will appear in 2005. To complete the project, we reduced our four epochs of XMM data for NGC4258, one archival XMM observation, and all existing Chandra datasets for NGC4258 (with the latest calibration tables and a grid of corrections for pileup). Self-consistent reduction of all these data permitted detailed comparison that could not have been accomplished simply by taking published model fits that appear in the literature. To accumulate a broader monitoring record, we combined the Chandra and XMM results with those published for SAX and ASCA. We modeled the Chandra and XMM data self-consistently with partially absorbed, hard power-law, soft thermal plasmas, and soft power-law components. Over nine years, the photo-electric absorbing column exhibited a 40% drop between two ASCA epochs separated by 3 years and a 60% rise between two XMM epochs separated by just 5 months. In contract, uncorrelated factor of of 2-3 changes were seen in absorbed flux on te timescale of years, which suggests intrinsic variability of the central engine. The warped disk that is a known source of H2O maser emission in 4258 is believed to cross the line of sight to the central engine. We have proposed that the variations in absorbing column arise from inhomogeneities in the rotating disk, as they sweep across the line of sight. We estimate from the XMM data that the inhomogeneities are about 1E+15 cm in size at radii greater than 0.27 pc. This is consistent with the estimated radius of the disk crossing estimated entirely independently, and it solidifies evidence that the warped accretion disk is the absorber in this (and possible other) AGN.

Greenhill, Lincoln J.↗

EPIC Study of Two Enigmatic Sources: The Mouse and SNR 359.1-0.5

The objective of the original proposal was to observe the Mouse pulsar wind nebula (associated with PSR J1744-2958) and the nearby supernova remnant G359.1-0.5, where the pulsar was probably born, with the XMM-Newton observatory to study the properties of these objects. SNR G359.1-0.5 was accepted as a Category C target and has not been observed. The Mouse was observed on April 27,2003 for 52 ks. The image analysis has shown that the Mouse is extended in the East-West direction, possibly along the direction of the pulsar's proper motion. The spectrum of this pulsar wind nebula can be described as an absorbed power law with the photon index GAMMA = 1.9 plus or minus 0.1, effective hydrogen column density n(sub H) = (2.6 plus or minus 0.1) x 10(exp 22) per square centimeter, and flux F = 1.8 x 10(exp -11) erg per square centimeter per second in the 1-10 keV energy range. Based on the n(sub H) value, the distance to the source is about 5 kpc, which results in the luminosity 3.7 x 10(exp 34) erg per second. We conclude that PSR J1744-2958 and the Mouse are not physically associated with G359.1-0.5, which lies at a larger distance. In addition to the Mouse, we also detected two Low-Mass X-ray Binaries, SLX 1744-299 and 1744-300, in the EPIC MOS and PN fields of view. The latter of these objects showed a Type I X-ray burst during our observation, with a rise time of 5 s and decay time of 60 s. A very strong pileup during the burst made the analysis of the burst properties unreliable. The spectral analysis of the persistent radiation from SLX 1744-299 and 1744-300 yields the hydrogen column densities of 3.2 plus or minus 0.1 and (3.6 plus or minus 0.2) x 10(exp 22) per square centimeter, respectively, which suggests that the sources are close to the Galactic center (d = 8-9 kpc). The spectra can be reasonably well fitted with a blackbody plus thin disk model, with the blackbody temperatures of 1.7 plus or minus 0.2 and 1.8 plus or minus 0.2 keV, respectively.

Pavlov, George↗

"XMM/RXTE Observations of GX 339-4"

In March 2003, we performed two simultaneous XMM/RXTE observations of the black hole candidate GX 339-4. Our goal is to compare these data to our prior simultaneous RXTE/ASCA observations (Nowak, Wilms & Dove, 2002). These observations were carried out in timing mode, as opposed to burst mode, and are more complex to analyze than we expected. Specifically, the data suffered from a number of telemetry dropouts (in fact, the standard archive processing failed on these data, and more than a year passed from the time of the observations before the data was delivered to us). Furthermore, the core of the EPIC PSF suffers slightly from pileup and gain shifts. We continue to work on this data, however, and anticipate publishing it within the next academic year. Here we highlight our ongoing work and outline our plans for publication.

Nowak, M. A.↗

X-Ray Dust Scattering At Small Angles: The Complete Halo Around GX13+1

The exquisite angular resolution available with Chandra should allow precision measurements of faint diffuse emission surrounding bright sources, such as the X-ray scattering halos created by interstellar dust. However, the ACIS CCDs suffer from pileup when observing bright sources, and this creates difficulties when trying to extract the scattered halo near the source. The initial study of the X-ray halo around GX13+1 using only the ACIS-I detector done by Smith, Edgar & Shafer (2002) suffered from a lack of sensitivity within 50" of the source, limiting what conclusions could be drawn. To address this problem, observations of GX13+1 were obtained with the Chandra HRC-I and simultaneously with the RXTE PCA. Combined with the existing ACIS-I data, this allowed measurements of the X-ray halo between 2-1000". After considering a range of dust models, each assumed to be smoothly distributed with or without a dense cloud along the line of sight, the results show that there is no evidence in this data for a dense cloud near the source, as suggested by Xiang et al. (2005). In addition, although no model leads to formally acceptable results, the Weingartner & Draine (2001) and all but one of the composite grain models from Zubko, Dwek & Arendt (2004) give particularly poor fits.

Smith, Randall K.↗

Photoionization Modeling of Oxygen K Absorption in the Interstellar Medium: The Chandra Grating Spectra of XTE J1817-330

We present detailed analyses of oxygen K absorption in the interstellar medium (ISM) using four high-resolution Chandra spectra towards the X-ray low-mass binary XTE J1817-330. The 11-25 A broadband is described with a simple absorption model that takes into account the pileup effect and results in an estimate of the hydrogen column density. The oxygen K-edge region (21-25 A) is fitted with the physical warmabs model, which is based on a photoionization model grid generated with the XSTAR code with the most up-to-date atomic database. This approach allows a benchmark of the atomic data which involves wavelength shifts of both the K lines and photoionization cross sections in order to fit the observed spectra accurately. As a result we obtain: a column density of N(sub H) = 1.38 +/- 0.01 x 10(exp 21) cm(exp -2); ionization parameter of log xi = .2.70 +/- 0.023; oxygen abundance of A(sub O) = 0.689(exp +0.015./-0.010); and ionization fractions of O I/O = 0.911, O II/O = 0.077, and O III/O = 0.012 that are in good agreement with previous studies. Since the oxygen abundance in warmabs is given relative to the solar standard of Grevesse and Sauval (1998), a rescaling with the revision by Asplund et al. (2009) yields A(sub O) = 0.952(exp +0.020/-0.013, a value close to solar that reinforces the new standard. We identify several atomic absorption lines.K-alpha , K-beta, and K-gamma in O I and O II; and K-alpha in O III, O VI, and O VII--last two probably residing in the neighborhood of the source rather than in the ISM. This is the first firm detection of oxygen K resonances with principal quantum numbers n greater than 2 associated to ISM cold absorption.

Gatuzz, E.↗

Ogle-2012-blg-0724lb: A Saturn Mass Planet Around an M-dwarf

We report the discovery of a planet by the microlensing method, OGLE-2012-BLG-0724Lb. Although the duration of the planetary signal for this event was one of the shortest seen for a planetary event, the anomaly was well covered thanks to high-cadence observations taken by the survey groups OGLE and MOA. By analyzing the light curve, this planetary system is found to have a mass ratio q = (1.58 +/- 0.15) x 10(exp -3). By conducting a Bayesian analysis, we estimate that the host star is an M dwarf with a mass of M(sub L) = 0.29(+0.33/-0.16) solar mass located at D(sub L) = 6.7(+1.1/-1.2) kpc away from the Earth and the companion's mass is m(sub P) = 0.47(+0.54/-0.26) M(Jup). The projected planet- host separation is a falsum = 1.6(+0.4/-0.3) AU. Because the lens-source relative proper motion is relatively high, future highresolution images would detect the lens host star and determine the lens properties uniquely. This system is likely a Saturn-mass exoplanet around an M dwarf, and such systems are commonly detected by gravitational microlensing. This adds another example of a possible pileup of sub-Jupiters (0.2 less than m(sub P)/M(sub Jup) less than 1) in contrast to a lack of Jupiters (approximately 1-2 M(sub Jup)) around M dwarfs, supporting the prediction by core accretion models that Jupiter-mass or more massive planets are unlikely to form around M dwarfs.

microlensing↗

Plasma Waves Associated with Mass-Loaded Comets

Plasma waves and instabilities are integrally involved with the plasma "pickup" process and the mass loading of the solar wind (thus the formation of ion tails and the magnetic tails). Anisotropic plasmas generated by solar wind-comet interactions (the bow shock, magnetic field pileup) cause the generation of plasma waves which in turn "smooth out" these discontinuities. The plasma waves evolve and form plasma turbulence. Comets are perhaps the best "laboratories" to study waves and turbulence because over time (and distance) one can identify the waves and their evolution. We will argue that comets in some ways are better laboratories than magnetospheres, interplanetary space and fusion devices to study nonlinear waves and their evolution.

instabilities↗

Characterization of Turbulence in the Mars Plasma Environment with MAVEN Observations

We characterize turbulence in the Mars plasma environment in a global scale for the first time by computing spectral indices for magnetic field fluctuations (slopes in the magnetic field power spectra) and determining how they vary with frequency and in different regions. In the magnetosheath, unlike in the solar wind, we find an absence of the inertial range which has a spectral index value equal to the Kolmogorov scaling value of minus 5 divided by 3. Instead, as observed in the magnetosheaths of other planets, we find that the spectral indices transition from low negative values close to minus 0.5 at low frequencies (less than proton gyrofrequency) to values much lower than minus 5 divided by 3 at high frequencies (greater than proton gyrofrequency). This indicates that the pristine solar wind is modified at the Martian bow shock and that the fluctuations are dominated by locally generated fluctuations in the magnetosheath. The absence of spectral indices with the Kolmogorov scaling value indicates that the fluctuations in the magnetosheath do not have sufficient time to interact with one another leading to a fully developed energy cascade. Spectral index values near the Kolmogorov scaling value are observed for the low-frequency range near the magnetic pileup boundary, and this indicates the presence of fully developed energy cascade. In the wake, we find that the spectral indices have approximately the same values, typically near minus 2, for both the low- and high-frequency ranges. We observe seasonal variations of the spectral indices, mainly in the upstream region, which indicate the seasonal variations of the proton cyclotron waves.

Magnetosheath↗

Does the Solar Wind Electric Field Control the Reconnection Rate at Earth's Subsolar Magnetopause?

We demonstrate that the reconnection rate at the subsolar magnetopause is stronglycontrolled by the solar wind electric field and depends weakly on the local properties of the dissipationregion. Our approach is to match the solar wind and magnetospheric states in an internal boundarylayer described by the Cassak and Shay (2007, https://doi.org/10.1063/1.2795630) expression fortwo-dimensional asymmetric reconnection. Faraday's law along the Sun-Earth line determinesthe variation of the solar wind electric field from the bow shock to the magnetopause. While themagnetospheric plasma exerts some control over the reconnection rate, magnetic flux pileup in the sheathpartially compensates for any local reduction in the reconnection rate. For a fixed magnetospheric state,the reconnection rate is shown to be directly proportional to the solar wind electric field, thus explainingwhy the solar wind electric field correlates well with geomagnetic indices.

Dorelli, John C.↗

Fast Neutron Spectroscopy with Organic Scintillation Detectors in a High-Radiation Environment

Organic scintillators with pulse shape discrimination capability are widely used in both research and practical applications of neutron detection. The neutron and gamma-ray identification performance of the detector depends on the classification algorithms, noise filters and pileup rejection criteria in a high-flux bremsstrahlung radiation environment. In this paper, a technique has been developed and implemented for the neutron detection with multiple filter and discrimination steps, which to a high confidence level eliminates counting of gamma-ray pulses. Such a technique is merited when making measurements in a high flux bremsstrahlung and secondary fluorescence environment. The EJ-309 and stilbene detectors coupled to the digital data acquisition system were used for the calibration assessments with standard gamma-ray and neutron sources such as 137Cs, 60Co, 252Cf, and Am-Be. The MCNPX-PoliMi and GEANT4 toolkits were used to simulate the light output and the optical photon transport in the scintillators and create detector response functions for each type of detector. The neutron spectrum unfolding algorithm, GRAVELW, was used to recreate and calibrate with the Am-Be as final step before applying the neutron detection system to extract fusion neutron spectra generated in an intense bremsstrahlung radiation environment. This new technique described offers the user the ability to measure neutron spectra in a high-flux gamma-ray field and tune the parameters to meet required filtering needs.

Neutron Detector, Organic Scintillator, PulseShape↗

Reconstruction of Charged Particle Tracks in Realistic Detector Geometry Using a Vectorized and Parallelized Kalman Filter Algorithm

One of the most computationally challenging problems expected for the High-Luminosity Large Hadron Collider (HL-LHC) is finding and fitting particle tracks during event reconstruction. Algorithms used at the LHC today rely on Kalman filtering, which builds physical trajectories incrementally while incorporating material e ects and error estimation. Recognizing the need for faster computational throughput, we have adapted Kalman-filterbased methods for highly parallel, many-core SIMD and SIMT architectures that are now prevalent in high-performance hardware. Previously we observed significant parallel speedups, with physics performance comparable to CMS standard tracking, on Intel Xeon, Intel Xeon Phi, and (to a limited extent) NVIDIA GPUs. While early tests were based on artificial events occurring inside an idealized barrel detector, we showed subsequently that our mkFit software builds tracks successfully from complex simulated events (including detector pileup) occurring inside a geometrically accurate representation of the CMS-2017 tracker. Here, we report on advances in both the computational and physics performance of mkFit, as well as progress toward integration with CMS production software. Recently we have improved the overall eciency of the algorithm by preserving short track candidates at a relatively early stage rather than attempting to extend them over many layers. Moreover, mkFit formerly produced an excess of duplicate tracks; these are now explicitly removed in an additional processing step. We demonstrate that with these enhancements, mkFit becomes a suitable choice for the first iteration of CMS tracking, and eventually for later iterations as well. We plan to test this capability in the CMS High Level Trigger during Run 3 of the LHC, with an ultimate goal of using it in both the CMS HLT and oine reconstruction for the HL-LHC CMS tracker.

Cerati, Giuseppe↗