Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase-Change Material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Theoretical analysis of a refrigerant injection-enhanced air source heat pump with thermal energy storage for extended cold-climate and defrosting operations

This study investigates a conceptual refrigerant injection-enhanced air source heat pump with integrated thermal energy storage (ITES-ASHP) that combines two-phase flash tank injection with phase change material (PCM) thermal energy storage (TES) to extend cold-climate operation and maintain indoor heating during defrost. A steady-state, mode-based thermodynamic cycle model is developed to evaluate heating and defrosting modes with and without refrigerant injection and TES integration over an outdoor temperature range of 8 to −25 °C. The framework is applied to refrigerants R-290, R-454B, R-410 A, and R-32. A parametric study is conducted for an 18-kW system rated for an outdoor temperature of 8 °C, with the compressor frequency scheduled to 150 Hz. The optimal PCM phase-change temperature is identified as 20 °C for R-290, R-454B, and R-410 A, and 15 °C for R-32. At the design condition of −25 °C outdoor temperature, the proposed concept achieves a combined COP of 2.22 for R-290, corresponding to a 60% increase relative to the theoretical single-stage baseline for combined heating and defrosting operation. Safety screening based on compressor discharge temperature (≤ 120 °C) and injection quality (≥ 0.65), together with performance evaluation, indicates that R-290 is the most suitable candidate, followed by R-410 A and R-454B. Under the assumptions and constraints used here, R-32 is found to be less suitable due to excessive discharge temperatures and a higher risk of wet compression.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Advanced blade-shaped thermal energy storage device: Development and application

Thermal energy storage (TES) using phase change materials (PCMs) is a promising approach for capturing and reusing excess thermal energy, yet widespread adoption is limited by low thermal conductivity, bulky configurations, and inadequate scalability. Here, this study presents a modular, blade-shaped TES prototype designed to address these challenges. The device integrates a lightweight aluminum shell, an embedded serpentine coil for active or passive heat exchange, and a cost-effective corrugated metal mesh for enhanced PCM thermal conductivity. With thickness-to-length and thickness-to-width ratios of 0.03 and 0.08, respectively, the blade-shaped TES achieves a compact, modular form factor suitable for space-constrained applications. Experimental testing demonstrated the efficient charge and discharge behavior of blade-shaped TES, capturing PCM superheating, phase-change transitions, and subcooling dynamics, with charging and discharging efficiencies of 94.9% and 94.6%, respectively. Also, the system can potentially achieve higher energy density than that of conventional TES designs. When integrated into a household refrigerator during the study, three blade-shaped TES modules successfully shifted 100% of peak-time compressor operation to off-peak hours, reducing energy consumption while maintaining more stable compartment temperatures. The blade-shaped TES's thin geometry, modularity, and enhanced thermal performance support scalable deployment across residential, commercial, and industrial applications, providing a versatile, cost-effective solution for high-efficiency, demand-flexible thermal energy management.

Blade-shaped↗
DOE OSTI2025

Dual-season thermal energy storage-integrated heat pump system for load shifting: experiments, modeling and nationwide analysis

Here, this paper proposes and validates a dual-season thermal energy storage-integrated heat pump (TES-HP) system that shifts building electric load in both cooling and heating modes using a single phase-change TES. The design uses the TES as a heat sink for the condenser in summer and a heat source for the evaporator in winter, thereby reducing on-peak electric demand while ensuring compatible with existing air-distribution systems. A 14-kW TES-HP prototype with six operating modes and novel refrigerant charge management strategies was experimentally tested under varied conditions. Subsequently, data-driven polynomial performance curves were developed and validated against experiments, then coupled with a phase change material (PCM) model and a calibrated building model within a rule-based controller. Single-day case studies demonstrated effective on-peak demand reduction while maintaining thermal comfort. During cooling, hourly power was lowered by up to 1.5 kW; in heating, average hourly power decreased from over 3.5 kW to 1.8 kW, compared to an HP-only system, achieving 64.5 % load shifting, and the need for resistance heating was eliminated. Seasonal simulations showed typical on-peak electricity savings of 25–35 % in cooling and 40–65 % in heating, with the largest benefits on the hottest and coldest days. Extended response-surface analysis and nationwide mapping quantified load shifting as functions of ambient and TES temperatures, revealing a seasonal trade-off in TES phase-change temperature. These results demonstrate the TES-HP system as a practical and scalable solution for grid-interactive buildings that reduces on-peak demand and electricity use while maintaining thermal comfort and enhancing grid flexibility and reliability.

Grid-interactive buildings↗
DOE OSTI2025

Stable-Cycling Sustainable Na-Ion Batteries with Olivine Iron Phosphate Cathode in an Ether Electrolyte

Sustainable batteries using nontoxic, earth-abundant, and low-cost materials are key to decarbonization. Olivine NaFePO 4 fulfills these criteria, is attractive for Na-ion batteries, and can be derived from LiFePO 4 recycled from Li-ion battery wastes. Critical knowledge is needed for transforming LiFePO 4 to NaFePO 4 to enable such a sustainable, green engineering path toward high-performance Na-ion batteries. Herein, we report on the development of a stable-cycling, sustainable olivine iron phosphate-based Na-ion battery empowered by an improved understanding of materials transformation and electrolyte chemistry. First, we found that the conventional carbonate electrolyte with fluoroethylene carbonate additive causes an additional plateau (~2.4 V) at the end of the discharge process of the FePO 4 ||Na metal cell, leading to lower initial discharge capacity and voltage. This result shows that the voltage profile is influenced by not only intrinsic materials phase transformation during battery cycling but also the electrolyte additives and interphases formed. With the 1 M NaPF 6 diglyme electrolyte, we achieved an excellent capacity retention of 96% and 98% after 500 cycles at 1 and 5 C, respectively. Second, we chemically sodiated FePO 4 to form single-phase Na 0.9 FePO 4 . Na 0.9 FePO 4 ||hard carbon full cells demonstrated a remarkable capacity retention of ~84% at 3 and 5 C after 1000 cycles. The successful implementation of hard carbon, which can be derived from biomass waste, will further improve the sustainability of energy storage technologies. Our research demonstrates that electrolyte chemistry influences the voltage profile of phase-changing electrodes and provides effective electrolyte and full-cell design solutions for stable-cycling NaFePO 4 .

36 MATERIALS SCIENCE↗
DOE OSTI2026

Dynamic Nanoscale Spatial Heterogeneity in a Perovskite-to-Brownmillerite Topotactic Phase Transformation

Phase transitions are omnipresent in modern condensed matter physics and its applications. In solids, first-order phase transformations typically occur by nucleation and growth under nonequilibrium conditions. Under constant external conditions, e.g., constant annealing temperature and pressure, the nucleation and growth dynamics are often thought of as spatially and temporally independent. Here, in situ Bragg X-ray photon correlation spectroscopy (XPCS) reveals nanoscale spatial and dynamical heterogeneity in the perovskite-to-brownmillerite topotactic phase transformation in La 0.7 Sr 0.3 CoO 3 thin films annealed under constant reducing conditions over a time span of multiple hours. Specifically, a time scale associated with domain growth remains stable, with a corresponding domain wall speed of v d = 6 ± 0.5 × 10 –4 nm/s (2 ± 0.2 nm/h), while a slower time scale, associated with temperature-driven depinning of domains, leads to accelerating dynamics with time scales following an aging power law with exponent −2.2 ± 0.5. This experiment demonstrates that Bragg XPCS is a powerful tool to study nanoscale dynamics in structural phase transformations, with the ability to extract quantitative average values related to nanodomain motion in situ. Furthermore, the results are relevant for phase engineering of phase-change devices, as they show that nanoscale dynamics, linked to domain and domain-wall motion, can continuously evolve and speed up with time, even hours after the initiation of the phase transformation, with potential repercussions on electrical performance.

X-ray photon correlation spectroscopy↗
DOE OSTI2022

Phase-transition-induced thermal hysteresis in Type-II weyl semimetals M o T e 2 and M o 1 − x W x T e 2

The resistivity versus temperature measurement is commonly used for identifying temperature-induced phase-change and the resulting hysteresis loop. However, while the resistance is influenced by both the density of states and the carrier lifetimes, the Seebeck coefficient is influenced predominantly by the density of states, and hence is a better probe of the phase of the material. Here, 1T'-T d temperature-induced phase transition in MoTe 2 is studied using temperature-dependent X-ray diffraction, resistivity, and Seebeck coefficient measurements. A more distinct hysteresis is observed when measuring the Seebeck coefficient which is consistent with direct measurements of the crystallographic angle using the temperature-dependent X-ray diffraction. The Seebeck and electrical resistivity measurements indicate a competing contribution of the electrons and holes. The contribution of electron pockets becomes more dominant when molybdenum atoms are replaced by tungsten. In MoTe 2 , a topologically induced enhancement of the Nernst coefficient is observed at low temperatures and a relatively large phase-transition induced Thomson coefficient of 111 μV∙K -1 is measured at 254 K.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Theoretical and Experimental Advances in High-Pressure Behaviors of Nanoparticles

Using compressive mechanical forces, such as pressure, to induce crystallographic phase transitions and mesostructural changes while modulating material properties in nanoparticles (NPs) is a unique way to discover new phase behaviors, create novel nanostructures, and study emerging properties that are difficult to achieve under conventional conditions. In recent decades, NPs of a plethora of chemical compositions, sizes, shapes, surface ligands, and self-assembled mesostructures have been studied under pressure by in-situ scattering and/or spectroscopy techniques. As a result, the fundamental knowledge of pressure–structure–property relationships has been significantly improved, leading to a better understanding of the design guidelines for nanomaterial synthesis. In the present review, we discuss experimental progress in NP high-pressure research conducted primarily over roughly the past four years on semiconductor NPs, metal and metal oxide NPs, and perovskite NPs. We focus on the pressure-induced behaviors of NPs at both the atomic- and mesoscales, inorganic NP property changes upon compression, and the structural and property transitions of perovskite NPs under pressure. We further discuss in depth progress on molecular modeling, including simulations of ligand behavior, phase-change chalcogenides, layered transition metal dichalcogenides, boron nitride, and inorganic and hybrid organic–inorganic perovskites NPs. These models now provide both mechanistic explanations of experimental observations and predictive guidelines for future experimental design. Here, we conclude with a summary and our insights on future directions for exploration of nanomaterial phase transition, coupling, growth, and nanoelectronic and photonic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

In Situ Imaging of an Anisotropic Layer-by-Layer Phase Transition in Few-Layer MoTe 2

Understanding the phase transition mechanisms in two-dimensional (2D) materials is a key to precisely tailor their properties at the nanoscale. Molybdenum ditelluride (MoTe 2 ) exhibits multiple phases at room temperature, making it a promising candidate for phase-change applications. Here, we fabricate lateral 2H–T d interfaces with laser irradiation and probe their phase transitions from micro- to atomic scales with in situ heating in the transmission electron microscope (TEM). By encapsulating the MoTe 2 with graphene protection layers, we create an in situ reaction cell compatible with atomic resolution imaging. We find that the T d -to-2H phase transition initiates at phase boundaries at low temperatures (200–225 °C) and propagates anisotropically along the b-axis in a layer-by-layer fashion. We also demonstrate a fully reversible 2H-T d -2H phase transition cycle, which generates a coherent 2H lattice containing inversion domain boundaries. Furthermore, our results provide insights on fabricating 2D heterophase devices with atomically sharp and coherent interfaces.

2D materials↗
DOE OSTI2024

Reversible non-volatile electronic switching in a near-room-temperature van der Waals ferromagnet

Abstract Non-volatile phase-change memory devices utilize local heating to toggle between crystalline and amorphous states with distinct electrical properties. Expanding on this kind of switching to two topologically distinct phases requires controlled non-volatile switching between two crystalline phases with distinct symmetries. Here, we report the observation of reversible and non-volatile switching between two stable and closely related crystal structures, with remarkably distinct electronic structures, in the near-room-temperature van der Waals ferromagnet Fe 5− δ GeTe 2 . We show that the switching is enabled by the ordering and disordering of Fe site vacancies that results in distinct crystalline symmetries of the two phases, which can be controlled by a thermal annealing and quenching method. The two phases are distinguished by the presence of topological nodal lines due to the preserved global inversion symmetry in the site-disordered phase, flat bands resulting from quantum destructive interference on a bipartite lattice, and broken inversion symmetry in the site-ordered phase.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Unveiling the structure and electronic characteristics of amorphous GeS for high performance threshold switching

Ovonic threshold switching selectors are widely studied owing to the essential application in high density phase-change memory. Amorphous GeS is proposed as a potential candidate for the excellent performance. However, the knowledge of amorphous GeS is still insufficient up to date. Here, we have studied the structure and electronic characteristics of GeS in the amorphization process, by using ab initio molecular dynamics simulations. The results indicate that the amorphous GeS is mainly made up of Ge–S bonds. The Ge- and S-centered clusters are dominantly in the form of octahedral structures in liquid GeS. Furthermore, during the amorphization process, most of Ge-centered clusters become highly coordinated octahedrons while a small number of Ge-centered clusters change to tetrahedrons, and the S-centered clusters deviate from the octahedral structure gradually. In addition, the large bandgap and the relatively small mid-gap states in amorphous GeS lead to a high switching voltage.

42 ENGINEERING↗
NASA NTRS1989

Similarity solutions for phase-change problems

A modification of Ivantsov's (1947) similarity solutions is proposed which can describe phase-change processes which are limited by diffusion. The method has application to systems that have n-components and possess cross-diffusion and Soret and Dufour effects, along with convection driven by density discontinuities at the two-phase interface. Local thermal equilibrium is assumed at the interface. It is shown that analytic solutions are possible when the material properties are constant.

Canright, D.↗
NASA NTRS1996

The study of flow pattern and phase-change problem in die casting process

The flow pattern and solidification phenomena in die casting process have been investigated in the first phase study. The flow pattern in filling process is predicted by using a VOF (volume of fluid) method. A good agreement with experimental observation is obtained for filling the water into a die cavity with different gate geometry and with an obstacle in the cavity. An enthalpy method has been applied to solve the solidification problem. By treating the latent heat implicitly into the enthalpy instead of explicitly into the source term, the CPU time can be reduced at least 20 times. The effect of material properties on solidification fronts is tested. It concludes that the dependence of properties on temperature is significant. The influence of the natural convection over the diffusion has also been studied. The result shows that the liquid metal solidification phenomena is diffusion dominant, and the natural convection can affect the shape of the interface. In the second phase study, the filling and solidification processes will be considered simultaneously.

Wang, T. S.↗
NASA NTRS1999

Numerical Simulations of Crystal Growth of an Alloy Under Microgravity Conditions

The directional solidification of a dilute binary alloy (Bi-1.0 at.%Sn)is investigated. Results are obtained at a gravity level of I pg. Computations are performed in two dimensions with a fixed, non-uniform grid. The simulation involves a solution of the species concentration equation (modified to account for solute rejection at the interface) and energy equation (modified to account for phase-change) for both the solid and liquid phases, in addition to the constitutive equations for describing convective flow in the melt. The effects of conductive heat transfer in the ampoule and in a capillary tube in the sample are included. To gauge the effects of including this growth capillary tube in the apparatus, simulations both with and without the capillary tube are presented and compared. Fully transient simulations have been performed; no simplifying steady-state approximations are used, however, the influence of solute on the melting temperature at the interface is not included. Both thermal and solutal convective cells are seen to form. Convective velocities are significantly damped inside the capillary, causing less segregation due to convection. As solidification proceeds beyond the capillary tube, longitudinal segregation arises as a result of the change in cross-sectional area of solidifying material. The magnitudes of the velocities in this cell increase significantly once the solid/liquid front passes beyond the end of the capillary tube; this causes a corresponding increase in the level of radial solute segregation in the solidified material.

Simpson, James E.↗
NASA NTRS2005

An Automatic Phase-Change Detection Technique for Colloidal Hard Sphere Suspensions

Colloidal suspensions of monodisperse spheres are used as physical models of thermodynamic phase transitions and as precursors to photonic band gap materials. However, current image analysis techniques are not able to distinguish between densely packed phases within conventional microscope images, which are mainly characterized by degrees of randomness or order with similar grayscale value properties. Current techniques for identifying the phase boundaries involve manually identifying the phase transitions, which is very tedious and time consuming. We have developed an intelligent machine vision technique that automatically identifies colloidal phase boundaries. The algorithm utilizes intelligent image processing techniques that accurately identify and track phase changes vertically or horizontally for a sequence of colloidal hard sphere suspension images. This technique is readily adaptable to any imaging application where regions of interest are distinguished from the background by differing patterns of motion over time.

McDowell, Mark↗
DOE OSTI2024

An Advanced Cooling Device for Concentrated Photovoltaic Systems

Concentrated photovoltaics (CPV) have the potential to significantly enhance the energy conversion utilization of solar panels and reduce solar generation costs, making them a crucial area of advancement in solar power generation technology. However, the concentration of sunlight can lead to overheating of solar panels, resulting in a notable reduction in both the efficiency of solar power generation and the lifespan of the panels. This challenge remains the predominant technical hurdle that hinders the application of concentrated photovoltaic power generation technology. In this study, we propose a new cooling method for concentrated photovoltaic power generation systems via an integrated approach of incorporating Phase-Change Thermal Storage (PCTS) and Thermoelectric Generator (TEG) technology. This new method not only enhances the overall system's electricity generation efficiency but also effectively resolves the technical challenge of concentrated photovoltaic panel overheating issues, ensuring the continuity of concentrated photovoltaic power generation and extending the lifespan of solar panels and their components. In order to make full use of the wasted heat generated by photovoltaic power generation and effectively improve the power generation efficiency of the system, this work developed a phase change heat storage device based on a phase change material. This device uses the temperature difference between day and night to recover wasted heat from photovoltaic power generation. Through integration with the thermoelectric power generation system, thermal energy can be converted into electrical energy. In addition, the Peltier effect of thermoelectric materials is used to construct a photovoltaic panel overheating protection system, which significantly improves the reliability and service life of the system.

Gou, Yimeng↗