SEARCH · Engineering Papers

Results for “Paraffin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

NASA NTRS2011

Passive Vaporizing Heat Sink

A passive vaporizing heat sink has been developed as a relatively lightweight, compact alternative to related prior heat sinks based, variously, on evaporation of sprayed liquids or on sublimation of solids. This heat sink is designed for short-term dissipation of a large amount of heat and was originally intended for use in regulating the temperature of spacecraft equipment during launch or re-entry. It could also be useful in a terrestrial setting in which there is a requirement for a lightweight, compact means of short-term cooling. This heat sink includes a hermetic package closed with a pressure-relief valve and containing an expendable and rechargeable coolant liquid (e.g., water) and a conductive carbon-fiber wick. The vapor of the liquid escapes when the temperature exceeds the boiling point corresponding to the vapor pressure determined by the setting of the pressure-relief valve. The great advantage of this heat sink over a melting-paraffin or similar phase-change heat sink of equal capacity is that by virtue of the =10x greater latent heat of vaporization, a coolant-liquid volume equal to =1/10 of the paraffin volume can suffice.

Knowles, TImothy R.↗

NASA NTRS2011

Fischer-Tropsch Catalyst for Aviation Fuel Production

As the oil supply declines, there is a greater need for cleaner alternative fuels. There will undoubtedly be a shift from crude oil to non-petroleum sources as a feedstock for aviation (and other transportation) fuels. The Fischer-Tropsch process uses a gas mixture of carbon monoxide and hydrogen which is converted into various liquid hydrocarbons; this versatile gas-to-liquid technology produces a complex product stream of paraffins, olefins, and oxygenated compounds such as alcohols and aldehydes. The Fischer-Tropsch process can produce a cleaner diesel oil fraction with a high cetane number (typically above 70) without any sulfur and aromatic compounds. It is most commonly catalyzed by cobalt supported on alumina, silica, or titania or unsupported alloyed iron powders. Cobalt is typically used more often than iron, in that cobalt is a longer-active catalyst, has lower water-gas shift activity, and lower yield of modified products. Promoters are valuable in improving Fischer-Tropsch catalyst as they can increase cobalt oxide dispersion, enhance the reduction of cobalt oxide to the active metal phase, stabilize a high metal surface area, and improve mechanical properties. Our goal is to build up the specificity of the Fischer-Tropsch catalyst while adding less-costly transition metals as promoters; the more common promoters used in Fischer-Tropsch synthesis are rhenium, platinum, and ruthenium. In this report we will describe our preliminary efforts to design and produce catalyst materials to achieve our goal of preferentially producing C8 to C18 paraffin compounds in the NASA Glenn Research Center Gas-To-Liquid processing plant. Efforts at NASA Glenn Research Center for producing green fuels using non-petroleum feedstocks support both the Sub-sonic Fixed Wing program of Fundamental Aeronautics and the In Situ Resource Utilization program of the Exploration Technology Development and Demonstration program.

deLaRee, Ana B.↗

NASA NTRS2011

Characterization of Catalyst Materials for Production of Aerospace Fuels

Due to environmental, economic, and security issues, there is a greater need for cleaner alternative fuels. There will undoubtedly be a shift from crude oil to non-petroleum sources as a feedstock for aviation (and other transportation) fuels. Additionally, efforts are concentrated on reducing costs coupled with fuel production from non-conventional sources. One solution to this issue is Fischer-Tropsch gas-to-liquid technology. Fischer-Tropsch processing of synthesis gas (CO/H2) produces a complex product stream of paraffins, olefins, and oxygenated compounds such as alcohols and aldehydes. The Fisher-Tropsch process can produce a cleaner diesel oil fraction with a high cetane number (typically above 70) without any sulfur or aromatic compounds. This process is most commonly catalyzed by heterogeneous (in this case, silver and platinum) catalysts composed of cobalt supported on alumina or unsupported alloyed iron powders. Physisorption, chemisorptions, scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) are described to better understand the potential performance of Fischer-Tropsch cobalt on alumina catalysts promoted with silver and platinum. The overall goal is to preferentially produce C8 to C18 paraffin compounds for use as aerospace fuels. Progress towards this goal will eventually be updated and achieved by a more thorough understanding of the characterization of catalyst materials. This work was supported by NASA s Subsonic Fixed Wing and In-situ Resource Utilization projects.

DeLaRee, Ana B.↗

NASA NTRS2012

Fischer-Tropsch Catalyst for Aviation Fuel Production

As the oil supply declines, there is a greater need for cleaner alternative fuels. There will undoubtedly be a shift from crude oil to nonpetroleum sources as a feedstock for aviation (and other transportation) fuels. The Fischer-Tropsch process uses a gas mixture of carbon monoxide and hydrogen which is converted into various liquid hydrocarbons; this versatile gas-to-liquid technology produces a complex product stream of paraffins, olefins, and oxygenated compounds such as alcohols and aldehydes. The Fischer-Tropsch process can produce a cleaner diesel oil fraction with a high cetane number (typically above 70) without any sulfur and aromatic compounds. It is most commonly catalyzed by cobalt supported on alumina, silica, or titania or unsupported alloyed iron powders. Cobalt is typically used more often than iron, in that cobalt is a longer-active catalyst, has lower water-gas shift activity, and lower yield of modified products. Promoters are valuable in improving Fischer-Tropsch catalyst as they can increase cobalt oxide dispersion, enhance the reduction of cobalt oxide to the active metal phase, stabilize a high metal surface area, and improve mechanical properties. Our goal is to build up the specificity of the Fischer-Tropsch catalyst while adding less-costly transition metals as promoters; the more common promoters used in Fischer-Tropsch synthesis are rhenium, platinum, and ruthenium. In this report we will describe our preliminary efforts to design and produce catalyst materials to achieve our goal of preferentially producing C8 to C18 paraffin compounds in the NASA Glenn Research Center Gas-To-Liquid processing plant. Efforts at NASA Glenn Research Center for producing green fuels using non-petroleum feedstocks support both the Sub-sonic Fixed Wing program of Fundamental Aeronautics and the In Situ Resource Utilization program of the Exploration Technology Development and Demonstration program.

DeLaRee, Ana B.↗

NASA NTRS2012

Characterization of Catalyst Materials for Production of Aerospace Fuels

Best, Lauren M.↗

NASA NTRS1964

Glycogen in the Nervous System: Methods for Light and Electron Microscopy - I

'l'he relative value of different methods for combined light and electron microscopical studies of glycogen in the nervous tissue was investigated. Picroalcoholic fixatives preserve glycogen in a considerable amount but give an inadequate morphological image of glycogen distribution and are unsuitable for ultrastructural studies. Fixation by perfusion, with Dalton's chromeosmic fluid seems adequate for ultrastructural cytochemistry of glycogen. Furthermore it permits routine paraffin embedding of brain slices adjacent to those used for electron microscopy. Dimedone blocking is a necessary step for a selective staining of glycogen with PAS after osmic fixation. Enzymatic removal of glycogen in osmic fixed nervous tissue can be done In paraffin-embedded tissue. It can also be performed in glycolmethacrylate-embedded tissue without removal of the embedding medium. Paraphenylenediamine stains glycogen following periodic acid oxidation.

Estable, Rosita F. De↗

NASA NTRS2014

Hybrid Propulsion In-Situ Resource Utilization Test Facility Development

Hybrid propulsion could be a potential game changing technology for several Mars applications, such as Mars Sample Return (MSR) and human exploration. A flexible hybrid test facility has been built at the Jet Propulsion Laboratory to provide data relevant to the design of such systems. This paper presents the motivations for such a system and its design. The facility is capable of testing 5 cm diameter fuel grains with gaseous oxygen and Mars in situ propellant production simulating oxidizer (varying mixtures of GO2, CO2 and CO). All currently planned tests utilize paraffin based fuels; however, alternative hybrid fuels may be used in the future. Variable length to outer diameter (L/D) ratios may also be tested to give insight on potential packaging constraints. The goal of this research is to enable the inclusion of hybrid propulsion systems in future mission design studies by determining the empirical constants in the regression rate equation for paraffin-based fuels with space storable and/or in situ oxidizers and to investigate the effect of L/D on combustion efficiency. Test results will be reported separately.

Hybrid Rockets↗

NASA NTRS2015

Hybrid Propulsion In-Situ Resource Utilization Test Facility Results

Hybrid rockets present a promising alternative to conventional chemical propulsion systems for In-Situ Resource Utilization (ISRU) and in-space applications. While they have many benefits for these applications, there are still many small details that require research before they can be adopted into flight systems. A flexible test facility was developed at JPL to test operation of hybrid motors at small scale (5 cm outer diameter fuel grains) over a range of conditions. Specifically, this paper studies two of the major advantages: low temperature performance and throttling. Paraffin-based hybrid rockets are predicted to have good performance at low temperatures. This could significantly decrease the overall system mass by minimizing the thermal conditioning required for Mars or outer planet applications. Therefore, the coefficient of thermal expansion and glass transition of paraffin are discussed. Additionally, deep throttling has been considered for several applications. This was a natural starting point for hotfire testing using the hybrid propulsion ISRU test facility. Additionally, short length to diameter ratio (L/D) fuel grains are tested to determine if these systems can be packaged into geometrically constrained spaces.

Karp, Ashley Chandler↗

NASA NTRS2016

Hybrid Propulsion In-Situ Resource Utilization Test Facility Results for Performance Characterization

Mechentel, F. S.↗

NASA NTRS2016

Hybrid Propulsion In-Situ Resource Utilization Test Facility Results for Performance Characterization

Hybrid propulsion presents a promising alternative to conventional systems for in-space propulsion applications using In-Situ Propellant Production (ISPP). A hybrid propulsion test facility has been built at the NASA Jet Propulsion Laboratory (JPL) with the capability of evaluating ISPP oxidizers (gaseous mixtures of O2 and CO2) and modifying fuel type and chamber geometry. This work is the result of a continuing e ort at JPL to characterize the burn characteristics and performance of different propellant combinations and motor configurations in order to re ne and support preliminary designs. Twelve tests using gaseous oxygen and two paraffin based fuels (Black Paraffin and SP1X) from the 2015 campaign are presented. Different reduction techniques are compared in an e ort to determine the uncertainty associated with deriving a regression rate law and evaluating c* efficiency with the collected data.Hybrid motors are mechanically and chemically simple propulsion systems that have the potential forlong-term storability with low gross mass. The oxidizer (such as gaseous O2) can be produced in-situ,signicantly reducing the landed mass. The solid, inert fuel is stored in the combustion chamber in its most dense state, further reducing the total structural mass and volume. Considerable eorts have been focusedon ISPP for Environmental Control and Life Support Systems (ECLSS) and human exploration of Mars.At optimum oxidizer to fuel ratio (O/F), about 70% of the total propellant mass could be produced in-situ.Paran based fuels exhibit a fast regression rate behavior due to the formation of a thin liquid layer on thefuel surface.1 A high burn rate is necessary in order to reach a medium to high thrust range. In order toachieve an O/F ratio close to optimum performance (between 2.1 and 2.7 for the O2/Paran combination),the fuel mass ow needs to be suciently large compared to the oxidizer ow. The slow regression rateof classical hybrid rocket fuels leads to long fuel grain designs or complicated multi-port structures. Singleport, high regression rate fuels have the potential to reduce residual propellant mass and have a grainlength to diameter ratio (L/D) more favorable for packaging. However, hybrid motors remain at a fairly lowTechnology Readiness Level (TRL), and solutions to accurately measure and increase performance are stilllacking, especially for small-scale motors that are constrained to tight packaging.A total of 12 hotres were performed and analyzed in this campaign. All of these tests were conductedat pressures above the critical pressure of paran wax, approximately 6.7 bar (97 psi).2 Three dierentmotor congurations were explored while conserving a single cylindrical port fuel grain. Additionally, sincethrottling is a crucial advantage of hybrid rocket propulsion systems, low oxidizer mass ows (60 - 100 g/s)and uxes (5 - 30 g/cm2/s) were investigated to determine the performance impact in this regime.

Mechentel, F. S.↗

DOE OSTI2024

Production of a Sustainable Aviation Fuel Additive from Waste Polystyrene

Sustainable aviation fuels (SAFs) are an important lever to achieving net zero CO 2 emissions in aviation. Fuel quality standards limit the blend volume of nonpetroleum-based jet fuel such as synthetic paraffinic kerosene (SPK) in Jet A to 50 vol %. One reason for this limit is the limited seal-swelling ability of SPK. Ethylbenzene (EB) as an additive can improve the swelling propensity of SPK. In this study, EB was produced through polystyrene pyrolysis, hydrogenation, and separation. The thermal pyrolysis of polystyrene produced a styrene-rich pyrolyzate. The pyrolyzate was hydrogenated by using Pd/C to produce an EB-rich mixture that yielded a crude EB of ∼90% purity on distillation. The O-ring swelling ability of crude EB of ∼90% purity was tested as a 12 and 16 vol % blend with SPK. Results reveal that EB addition enhanced seal swelling, but a more refined EB grade would be preferable. The results provide a pathway to address the twin issues of plastic pollution and SPK property improvement.

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2020

Evaluation of a Robust, In-Situ Surface Treatment for Pipeline Solids Deposition Mitigation in Flowing Systems

Abstract The formation/precipitation and deposition of pipeline solids, such as gas hydrates, asphaltenes, and waxes have long plagued production fields. Given the vast differences in chemistries of these solids, any current prevention or mitigation strategy, particularly for cases where multiple issues are a concern, is likely to involve an extensive assortment of undefined chemical additives that are both costly and add complexity to the system. Surface treatments (coatings), on the other hand, present a relatively new viable option for management strategies. A chemically and physically robust surface treatment with the ability to address deposition issues for multiple pipeline solids could not only decrease the operating expenditures for a field through material cost savings and obviation of downstream separation, but could also simplify produced fluids by eliminating additional chemicals from the mixture. The purpose of this study is to explore the feasibility of a particular surface treatment as part of a solids management strategy. This work utilizes an omniphobic surface treatment to probe its effects on gas hydrate, asphaltene, and wax deposition. Specifically, high pressure rocking cells are employed to study gas hydrate nucleation and deposition. A bench-scale flowloop filled with crude oil and heptane is used to quantify the deposition of crude oil and asphaltenes after a set time period. Lastly, a mechanical shear device measures the adhesion force of wax deposits on untreated/treated surfaces. The gas hydrate rocking cell tests demonstrate an increase in induction time and occasional elimination of hydrate nucleation with the surface treatment. Moreover, the same apparatus indicates that the critical shear to avoid hydrate deposition may be lowered in the presence of the surface treatment compared to untreated pristine carbon steel coupons. A custom-built asphaltene flowloop then establishes that this surface treatment is effective in dramatically reducing the deposition of the aliphatic components of a crude oil, with a moderate reduction in the asphaltene fraction. Finally, mechanical adhesion force measurements for solidified paraffin wax display trends in agreement with the asphaltene results. The surface treatment on both pristine and corroded surfaces is able to reduce the adhesion of wax deposits to values below a pristine, untreated surface.

03 NATURAL GAS↗

DOE OSTI2021

A Molecular Compound for Highly Selective Purification of Ethylene

Purification of C 2 H 4 from an C 2 H 4 /C 2 H 6 mixture is one of the most challenging separation processes, which is achieved mainly through energy-intensive, cryogenic distillation in industry. Sustainable, non-distillation methods are highly desired as alternatives. We discovered that the fluorinated bis(pyrazolyl)borate ligand supported copper(I) complex {[(CF 3 ) 2 Bp]Cu} 3 has features very desirable in an olefin–paraffin separation material. It binds ethylene exclusively over ethane generating [(CF 3 ) 2 Bp]Cu(C 2 H 4 ). This molecular compound exhibits extremely high and record ideal adsorbed solution theory (IAST) C 2 H 4 /C 2 H 6 gas separation selectivity, affording high purity (>99.5 %) ethylene that can be readily desorbed from separation columns. In-situ PXRD provides a “live” picture of the reversible conversion between [(CF 3 ) 2 Bp]Cu(C 2 H 4 ) and the ethylene-free sorbent in the solid-state, driven by the presence or removal of C 2 H 4 . As a result, molecular structures of trinuclear {[(CF 3 ) 2 Bp]Cu} 3 and mononuclear [(CF 3 ) 2 Bp]Cu(C 2 H 4 ) are also presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Propane Activation on Pt Electrodes at Room Temperature: Quantification of Adsorbate Identity and Coverage

Abstract C−H bond activation is the first step in manufacturing chemical products from readily available light alkane feedstock and typically proceeds via carbon‐intensive thermal processes. The ongoing emphasis on decarbonization via electrification motivates low‐temperature electrochemical alternatives that could lead to sustainable chemicals production. Platinum (Pt) electrocatalysts have shown activity towards reacting alkanes; however, little is known about propane electrocatalytic activation and conditions suitable for enabling selective oxidation to valuable products. Herein, we utilize a combination of electrochemical mass spectrometry (ECMS) and density functional theory (DFT) calculations to elucidate the potential dependence of propane activation on Pt electrocatalysts. Results show a strong dependence of adsorption on the applied potential in room‐temperature aqueous acidic electrolyte, with a maximum coverage of propane‐derived adsorbates at 0.30 V vs RHE. Using charge deconvolution and deuterated experiments, the mechanism of adsorption was elucidated, and C 3 H 2 * was determined as the average dehydrogenated propane‐derived adsorbate species. DFT calculations further corroborate these results, showing that the formation of deeply dehydrogenated species is energetically accessible at room temperature. The combined theoretical and experimental findings yield insights for selective activation of paraffinic C−H bonds at room temperature, aqueous conditions—a critical step towards decarbonized chemical manufacturing.

Chemistry↗

DOE OSTI2025

Sustainable Graphite and Jet Fuel from Biorefinery Residue

Abstract Battery‐grade graphite and aviation fuel are traditionally produced from non‐renewable, fossil carbon feedstocks and result in substantial greenhouse gas emissions. Biomass holds exciting potential as a renewable and sustainable feedstock for the production of graphite and aviation fuel, but challenges exist including the necessity of a catalyst when producing graphite and low selectivity when producing aviation fuel. A process to convert a biomass‐derived feedstock into graphite without the use of a catalyst and fuels with high selectivity towards sustainable aviation fuel (SAF) is innovated. Heavy bio‐oil undergoes a conversion process similar to the commercial production of synthetic graphite including coking at 500 °C, calcination at 1000 °C, and graphitization at 2800 °C. The resulting biographite exhibits excellent performance in lithium‐ion battery configurations with specific capacity of ~330 mAh g −1 and a 96.8 % capacity rebound after high rate cycling. The liquid hydrocarbon co‐product from coking is suitable for hydrotreating into SAF. The aviation fuel fraction (70 wt % of the fuel produced) meets ASTM standards and is composed primarily of cycloalkanes (~80 wt %) which improves energy density compared to paraffins produced by other SAF pathways and may replace aromatics for elastomer swelling in traditional jet fuel with less soot production.

09 BIOMASS FUELS↗

DOE OSTI2022

A scalable compressible volume of fluid solver using a stratified flow model

Here, in this paper, a Volume of Fluid method which uses a Stratified Flow model for flux calculation is proposed to solve a compressible multiphase flow in a way that has high parallel efficiency. The solver is part of an open-source computing tool to study fuel entrainment and combustion in the application of paraffin-based hybrid rocket motors. This paper focuses on the compressible Volume of Fluid solver for the liquid and gaseous phases in this environment. This solver uses perfect gas and stiffened gas models for equation of state, with the ability to easily add other models as desired. Additionally a comparison of a Riemann solver versus an AUSM+up scheme is conducted, showing improvement with the later in the solution of multiphase flows. This solver successfully reproduces shock tube cases with the expected accuracy, as well as simulating two-dimensional shear and gravity-driven flows. Results also show that the code is able to utilize a Stratified Flow model to evaluate shear flow without the need for interface reconstruction or gradient calculations. Finally, it is shown that the solver has near-ideal scaling under strong scaling tests as well as good performance in static scaling, giving improved performance over current options and implying future advancement of high-performance computing efficiency for multiphase flow solvers.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2020

Electrocatalytic Valorization into H2 and Hydrocarbons of an Aqueous Stream Derived from Hydrothermal Liquefaction

Electrocatalytic oxidation is an attractive process for valorizing the carbon and removal of nitrogen present in the aqueous waste streams at ambient conditions. Here, we evaluated the electrocatalytic oxidation as a function of applied potential over a commercial Pt electrode of aqueous waste stream generated via hydrothermal liquefaction. We validated the conversion of quantifiable carbon (e.g., carboxylic acids, alpha hydroxyacids, alcohols, ketones, amides) and unquantifiable carbon as well as nitrogen removal. The unquantifiable carbon was valorized to quantifiable short chain organic molecules (e.g., acetic). Model studies showed that carboxylic acids, alcohol and ketones converted following (non-) Kolbe chemistry. Amides and alpha hydroxyacids formed carboxylic acids that subsequently converted via (non-) Kolbe chemistry. Ammonia was oxidized into N2. The reaction rate varied for each molecule family with carboxylic acids and ammonia having the highest reaction rates. The main reaction products from the electrocatalytic oxidation at the anode were volatile, short chain hydrocarbons (i.e., olefins, paraffins) and CO generated via Kolbe chemistry, while H2 was generated at the cathode. The parallel denitrification, valorization of carbon, and H2 generation of the aqueous waste can replace and simplify the current unit operations used in a commercial hydrothermal liquefaction process. The high operation potential required to drive the electrocatalytic reaction is responsible for high operation costs; however, they can be either partially subsidized with sale of excess H2 at the current DOE goal of $2/kg H2. Thus, the present work shows how electrocatalytic oxidation can be used to valorize aqueous waste streams into volatile hydrocarbons and H2.

Electrocatalytic oxidation, Aqueous waste valoriza↗

DOE OSTI2020

Anodic electrocatalytic conversion of carboxylic acids on thin films of RuO 2 , IrO 2 , and Pt

The electrocatalytic upgrading of carboxylic acids, abundant biomass-derived molecules, remains a challenging task. In this paper, we report an electrocatalytic decarboxylation (ECDX) approach for the conversion of carboxylic acids into paraffins, olefins, and alcohols via (non-)Kolbe electrolysis on thin films (TFs). The ECDX rate, product selectivity, and current efficiency were potential and electrode dependent. For example, the ECDX activity of RuO 2 -TF was similar to that of Pt foil, but the selectivity to Kolbe products was lower on the former. RuO 2 -TF showed about five times higher rates for the oxygen evolution reaction than Pt foil, which resulted in lower current efficiency. The ECDX and O 2 evolution activities of IrO 2 -TF were potential dependent, but this electrode was selective to non-Kolbe products with low current efficiency (<10 %). This work highlights the performance of thin films as an alternative to bulk metals as anodes for oxidative upgrading of carboxylic acids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗