Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRESSURE RANGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Statistical mechanics of light elements at high pressure. VIII - Thomas-Fermi-Dirac theory for binary mixtures of H with He, C, and O

We present three-dimensional Thomas-Fermi-Dirac calculations of lattice mixing energies of hydrogen with carbon and oxygen atoms, respectively. The results are used to derive effective interatomic potentials for use in liquid-state mixture calculations. We then use the potentials to derive analytic expressions for binary mixture-free energies and to map out the phase diagrams of mixtures of hydrogen with, respectively, helium, carbon, and oxygen, over a pressure range of about 5 to about 10 to the 3rd Mbar. Within this pressure range, all three of the latter elements are found to have unlimited solubility in metallic hydrogen over a temperature range which lies above their pure-element melting temperatures, and which includes likely interior temperatures in the Jovian planets.

Hubbard, W. B.↗

Pressure-induced alpha to omega transition in titanium metal: a systematic study of the effects of uniaxial stress

The effects of uniaxial stress on the pressure-induced {alpha} {yields} {omega} transition in pure titanium (Ti) are investigated by means of angle dispersive X-ray diffraction in a diamond-anvil cell. Experiments under four different pressure environments reveal that: (1) the onset of the transition depends on the pressure medium used, going from 4.9 GPa (no pressure medium) to 10.5 GPa (argon pressure medium); (2) the {alpha} and {omega} phases coexist over a rather large pressure range, which depends on the pressure medium employed; (3) the hysteresis and quenchability of the {omega} phase is affected by differences in the sample pressure environment; and (4) a short-term laser heating of Ti lowers the {alpha} {yields} {omega} transition pressure. Possible transition mechanisms are discussed in the light of the present results, which clearly demonstrate the influence of uniaxial stress in the {alpha} {yields} {omega} transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design of Accumulators and Liquid/Gas Charging of Single Phase Mechanically Pumped Fluid Loop Heat Rejection Systems

For single phase mechanically pumped fluid loops used for thermal control of spacecraft, a gas charged accumulator is typically used to modulate pressures within the loop. This is needed to accommodate changes in the working fluid volume due to changes in the operating temperatures as the spacecraft encounters varying thermal environments during its mission. Overall, the three key requirements on the accumulator to maintain an appropriate pressure range throughout the mission are: accommodation of the volume change of the fluid due to temperature changes, avoidance of pump cavitation and prevention of boiling in the liquid. The sizing and design of such an accumulator requires very careful and accurate accounting of temperature distribution within each element of the working fluid for the entire range of conditions expected, accurate knowledge of volume of each fluid element, assessment of corresponding pressures needed to avoid boiling in the liquid, as well as the pressures needed to avoid cavitation in the pump. The appropriate liquid and accumulator strokes required to accommodate the liquid volume change, as well as the appropriate gas volumes, require proper sizing to ensure that the correct pressure range is maintained during the mission. Additionally, a very careful assessment of the process for charging both the gas side and the liquid side of the accumulator is required to properly position the bellows and pressurize the system to a level commensurate with requirements. To achieve the accurate sizing of the accumulator and the charging of the system, sophisticated EXCEL based spreadsheets were developed to rapidly come up with an accumulator design and the corresponding charging parameters. These spreadsheets have proven to be computationally fast and accurate tools for this purpose. This paper will describe the entire process of designing and charging the system, using a case study of the Mars Science Laboratory (MSL) fluid loops, which is en route to Mars for an August 2012 landing.

HRS↗

Design and simulation of MEMS vector hydrophone with reduced cross section based meander beams

MEMS based vector hydrophone is being one of the key device in the underwater communications. In this paper, we presented a bio-inspired MEMS vector hydrophone. The hydrophone structure consists of a proof mass suspended by four meander type beams with reduced cross-section. Modal patterns of the structure were studied. First three modal frequencies of the hydrophone structure were found to be 420 Hz, 420 Hz and 1646 Hz respectively. The deflection and stress of the hydrophone is found have linear behavior in the 1 µPa – 1Pa pressure range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High pressure structural and elastic properties of NiO up to 67 GPa

Using argon as the pressure medium, the structural and elastic properties of NiO have been investigated up to 67 GPa by the in situ synchrotron x-ray diffraction in a diamond anvil cell. Up to 67 GPa, NiO remains in the rhombohedral distorted rocksalt structure without phase transition. The lattice parameters of a and c, indexed in the hexagonal lattice, were found to decrease monotonically with increasing pressure, while the c/a ratio remains almost constant. The elastic properties of NiO were studied by analyzing the linewidth of various diffraction perks, which indicates that the factor S = (S{sub 11} - S{sub 12} - S{sub 44}/2) is negative although the single-crystal elastic compliances S{sub 11} is positive, respectively, in the investigated pressure range.

36 MATERIALS SCIENCE↗

Inadvertent actuation block valve for a small modular nuclear reactor

An inadvertent actuation block valve includes inlet and outlet orifices being in selective fluid communication via a chamber. A disc is disposed within the chamber and a bellows is configured to contract at a predetermined pressure differential between reactor fluid entering a reference pressure orifice and control fluid entering the inlet orifice. When the bellows contracts, the disc engages the outlet orifice and isolates fluid communication between the inlet and outlet orifices. The inadvertent actuation block valve prevents inadvertent opening of an emergency core cooling valve when a reactor is at operating pressure that is above the predetermined set pressure range. The inadvertent actuation block valve permits the emergency cooling valves to open and to remain open when reactor pressure is below the predetermined set pressure range. The inadvertent actuation block valve does not impede long term emergency cooling that occurs when the reactor is at low pressure.

O'Brien, Hugh S.↗

Measurement of Activation Volume for Creep of Dry Olivine at Upper-Mantle Conditions

Olivine is the most abundant and among the weakest phases in Earth's upper mantle, and thus, its rheological properties play a critical role in governing thermal structure and convective flow in the upper mantle. A persistent obstacle to constraining the in situ flow properties of olivine by laboratory experiment has been the difficulty in resolving the effect of pressure, which is weak within the 0- to ~2-GPa pressure range of conventional laboratory deformation instruments but potentially strong over the 1- to ~14-GPa range of the upper mantle. Using a deformation-DIA, one of a new generation of bonafide deformation devices designed for operation to ≥10 GPa, we have deformed dry, polycrystalline San Carlos olivine in high-temperature creep with the singular intent of providing the best achievable measurement of activation volume V* and a comprehensive statement of uncertainty. Under strictly dry conditions, at constant temperature (1,373 K) and strain rate (1 × 10 -5 s -1 ), varying only pressure (1.8 to 8.8 GPa), we measure V* = 15 ± 5 cm 3 /mol. We have reproduced the well-known mechanism change from [100]-slip to [001]-slip near 5 GPa and determined that, whatever the change in V* associated with the change in slip system, the effective value of 15 ± 5 cm3/mol is still accurate for modeling purposes in the 2- to 9-GPa pressure range. This is a substantial pressure effect, which in the absence of a temperature gradient would represent a viscosity increase from the top to bottom of the upper mantle of 5 ± 2 orders of magnitude.

58 GEOSCIENCES↗

RDX Compression, α→ γ Phase Transition, and Shock Hugoniot Calculations from Density-Functional-Theory-Based Molecular Dynamics Simulations

Prediction of the density and lattice compression properties of the α and γ phases of the hexahydro-1,3,5-trinitro-1,3,5-s-triazine (RDX) crystal and of the low-pressure α → γ phase transition upon pressure increase are general tests used to assess the accuracy of density-functional-theory- (DFT-) based computational methods and to identify the essential parameters that govern the behavior of this high-energy-density material under extreme conditions. The majority of previous DFT studies have analyzed such issues under static optimization conditions by neglecting the corresponding temperature effects. In this paper, we extend previous investigations and analyze the performance of dispersion-corrected density functional theory to predict the compression of RDX in the pressure range of 0–9 GPa and the corresponding α → γ phase transition under realistic temperature and pressure conditions. We demonstrate that, by using static dispersion-corrected density functional theory calculations, direct interconversion between the α and γ phases upon compression is not observed. This limitation can be addressed by using isobaric–isothermal molecular dynamic simulations in conjunction with DFT-D2-calculated potentials, an approach that is shown to provide an accurate description of both the crystallographic RDX lattice parameters and the dynamical effects associated with the α→ γ phase transformation. An even more comprehensive and demanding analysis was done by predicting the corresponding shock Hugoniot curve of RDX in the pressure range of 0–9 GPa. It was found that the theoretical results reproduce reasonably well the available experimental Hugoniot shock data for both the α and γ phases. Finally, the results obtained demonstrate that a satisfactory prediction of the shock properties in high-energy-density materials undergoing crystallographic and configurational transformations is possible through the combined use of molecular dynamics simulations in the isobaric–isothermal ensemble with dispersion-corrected density functional theory methods.

74 ATOMIC AND MOLECULAR PHYSICS↗

Structure and behavior of the barringerite Ni end-member, Ni[subscript 2]P, at deep Earth conditions and implications for natural Fe-Ni phosphides in planetary cores

High pressure and high temperature behavior of synthetic Ni{sub 2}P has been studied in a laser-heated diamond anvil cell up to 50 GPA and 2200 K. Incongruent melting associated with formation of pyrite-type NiP{sub 2} and amorphous Ni-P alloy was found at an intermediate pressure range, between 6.5 and 40 GPa. Above GPa, Ni{sub 2}P melts congruently. At room conditions, Ni{sub 2}P has hexagonal C22-type structure, and without heating it remains in this structure to at least 50 GPa. With a bulk modulus K{sub 0} = 201(8) GPa and K' = 4.2(6), Ni{sub 2}P is noticeable less compressible than hcp Fe, as well as all previously described iron phosphides, and its presence in the Earth core would favorable lower the core density. In contrast to Fe{sub 2}P, the c/a ratio in Ni{sub 2}P decreases on compression because of the lack of ferromagnetic interaction along the c direction. Lack of the C22{yields}C23 transition in the Ni{sub 2}P rules out a stabilizing effect of Ni on the orthorhombic phase of natural (Fe{sub 1-x}Ni{sub x}){sub 2}P allabogdanite.

58 GEOSCIENCES↗

Repeatability Modeling for Wind-Tunnel Measurements: Results for Three Langley Facilities

Data from extensive check standard tests of seven measurement processes in three NASA Langley Research Center wind tunnels are statistically analyzed to test a simple model previously presented in 2000 for characterizing short-term, within-test and across-test repeatability. The analysis is intended to support process improvement and development of uncertainty models for the measurements. The analysis suggests that the repeatability can be estimated adequately as a function of only the test section dynamic pressure over a two-orders- of-magnitude dynamic pressure range. As expected for low instrument loading, short-term coefficient repeatability is determined by the resolution of the instrument alone (air off). However, as previously pointed out, for the highest dynamic pressure range the coefficient repeatability appears to be independent of dynamic pressure, thus presenting a lower floor for the standard deviation for all three time frames. The simple repeatability model is shown to be adequate for all of the cases presented and for all three time frames.

Hemsch, Michael J.↗

Effects of ionic liquid electrode on pulse discharge plasmas in the wide range of gas pressures

Gas-liquid interfacial pulse discharge plasmas are generated in the wide range of gas pressures, where an ionic liquid is used as the liquid electrode. By analyzing the characteristics of discharge voltage and current, the discharge mechanisms at low and high pressures are found to be dominated by secondary electron emission and first Townsend ionization, respectively. Therefore, the discharge properties at low and high pressures are mainly determined by the cathode material and the discharge gas type, respectively. Furthermore, the plasma properties are investigated by a double Langmuir probe. The density of the positive pulse plasma is found to be much smaller than that of the negative pulse plasma, although the discharge voltage and current of the negative and positive pulse plasmas are of the same order of magnitude. The positive pulse discharge plasma is considered to quickly diffuse onto the chamber wall from the radially central region due to its high plasma potential compared with that in the peripheral region.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Amino Acid Degradation after Meteoritic Impact Simulation

Amino acids are among the most important prebiotic molecules as it is from these precursors that the building blocks of life were formed [1]. Although organic molecules were among the components of the planetesimals making up the terrestrial planets, large amounts of primitive organic precursor molecules are believed to be exogenous in origin and to have been imported to the Earth via micrometeorites, carbonaceous meteorites and comets, especially during the early stages of the formation of the Solar System [1,2]. Our study concerns the hypothesis that prebiotic organic matter, present on Earth, was synthesized in the interstellar environment, and then imported to Earth by meteorites or micrometeorites. We are particularly concerned with the formation and fate of amino acids. We have already shown that amino acid synthesis is possible inside cometary grains under interstellar environment conditions [3]. We are now interested in the effects of space conditions and meteoritic impact on these amino acids [4-6]. Most of the extraterrestrial organic molecules known today have been identified in carbonaceous chondrite meteorites [7]. One of the components of these meteorites is a clay with a composition close to that of saponite, used in our experiments. Two American teams have studied the effects of impact on various amino acids [8,9]. [8] investigated amino acids in saturated solution in water with pressure ranges between 5.1 and 21 GPa and temperature ranges between 412 and 870 K. [9] studied amino acids in solid form associated with and without minerals (Murchison and Allende meteorite extracts) and pressure ranges between 3 and 30 GPa. In these two experiments, the amino acids survived up to 15 GPa. At higher pressure, the quantity of preserved amino acids decreases quickly. Some secondary products such as dipeptides and diketopiperazins were identified in the [8] experiment.

Bertrand, M.↗

Pressure-induced creation and annihilation of Weyl points in T d - Mo 0.5 W 0.5 Te 2 and 1 T " - Mo 0.5 W 0.5 Te 2

By means of first-principles density-functional theory calculations, we investigate the role of hydrostatic pressure in the electronic structure of the T d (Pmn2 1 ) and 1T" (Pm) phases of the Weyl semimetal Mo 0.5 W 0.5 Te 2 , which is a promising material for phase-change memory technology and superconductivity. We particularly focus on changes occurring in the distribution of the gapless Weyl points (WPs) within the 0 to 45 GPa pressure range. Here we further investigate the structural phase transition and lattice dynamics of the T d and 1T" phases within the aforementioned pressure range. Our calculations suggest that both the T d and 1T" phases of Mo 0.5 W 0.5 Te 2 host four WPs in their full Brillouin zone at zero pressure. The total number of WPs increases to 44 (36) with increasing pressure via pair creation up to 20 (15) GPa for the T d (1T") phase, and beyond this pressure pair annihilation of WPs starts occurring, leaving only 16 WPs at 45 GPa in both phases. The enthalpy versus pressure data reveal that the 1T" phase is more favorable below the critical pressure of 7.5 GPa; however, beyond this critical pressure the T d phase becomes enthalpically favorable. We also provide the calculated x-ray diffraction spectra along with the calculated Raman- and infrared-active phonon frequencies to facilitate the experimental identification of the studied phases

36 MATERIALS SCIENCE↗

CO{sub 2} adsorption-based separation by metal organic framework (Cu-BTC) versus zeolite (13X)

The potential for the metal organic framework (MOF) Cu-BTC to selectively adsorb and separate CO{sub 2} is considered. Isotherms for CO{sub 2}, CH{sub 4}, and N{sub 2} were measured from 0 to 15 bar and at temperatures between 25 and 105{sup o}C. The isotherms suggest a much higher working capacity (x4) for CO{sub 2} adsorption on Cu-BTC relative to the benchmark zeolite 13X over the same pressure range. Higher CO{sub 2}/N{sub 2} and CO{sub 2}/CH{sub 4} selectivities in the higher pressure range (1-15 bar) and with lower heats of adsorption were also demonstrated. Cu-BTC was observed to be stable in O{sub 2} at 25{sup o}C, but its crystallinity was reduced in humid environments. The CO{sub 2} adsorption capacity was progressively reduced upon cyclic exposure to water vapor at low relative humidity (<30%), but leveled out at 75% of its original value after several water adsorption/desorption cycles. 27 refs., 1 fig.

01 COAL, LIGNITE, AND PEAT↗

Measurements of Tc (Q,P): Depression of the Superfluid Transition Temperature by a Heat Current Along the Lambda Line

We report experimental measurements of Tc (Q,P) for heat currents (Q) between I1and 100 micro W/sq cm and pressure (P) between SVP and 15 bar. The measurements were performed in a normal gravity environment, using the low-gravity simulator facility at JPL without the magnet being energized. The sample pressure was controlled to 0.1 micro bar using a hot volume, and a Straty-Adams capacitive pressure gauge. The total volume of helium in the sample cell and the hot volume was held constant using a pneumatic low temperature valve. A melting curve thermometer (MCT) measured the transition temperature (Tc) with a resolution of about 10 nK through a sidewall probe of the thermal conductivity sample cell. We employed the same measurement technique and procedure described by DAS. Preliminary results indicate that Tc (Q,P) depends very little on the pressure in the pressure range between SVP and 15 bar with a variation in the amplitude of Tc(Q,P) of less than about 5% observable in this pressure range. According to the Renormalization-group theory calculation by Haussmann and Dohm, the amplitude of Tc (Q,P) has a leading pressure-dependence term proportional to xi(sub 0) (sup (1/nu)), where xi(sub 0) is the correlation-length amplitude and nu is the correlation-length exponent. Thus, a small pressure dependence of the amplitude of Tc (Q,P) is expected since xi(sub 0) is very weakly dependent on pressure between SVP and 15 bar, consistent with our measurements.

Liu, Yuan-Ming↗

Experimental and theoretical high pressure study of calcium hydroxyaluminate phases

Five calcium hydroxyaluminate phases have been investigated by synchrotron powder diffraction at high-pressure: two hydrogarnets, kuzelite, stratlingite and ettringite. The obtained bulk modulus, K{sub 0}, for kuzelite, stratlingite and ettringite were 23(1), 27(1) and 30(3) GPa, respectively. Kuzelite and stratlingite underwent transformations above 1 GPa likely releasing interlayer water. Kuzelite becoming markedly amorphous and stratlingite remained crystalline, K{sub 0} = 58(6) GPa in the 1.5–5.5 GPa pressure range. The structural behavior for hydrogarnet samples is prone to the use of pressure transmitting media. K{sub 0} for Ca{sub 3}Al{sub 2}(OH){sub 12} was 81(2) and 76(2) GPa for silicone oil and alcohol mixture, respectively. A similar study for Ca{sub 3}Al{sub 1.7}Fe{sub 0.3}(OH){sub 12} yielded 73(1) and 58(1) GPa for silicone oil and alcohol mixture, respectively. Atomistic calculations using periodic Density Functional Theory showed that the softening in iron-doped katoite, when compared to stoichiometric katoite, can be assigned primarily to greater compressibility of Ca−O dodecahedra, which overcompensates strengthening of hydrogen bonding between Al/Fe hydroxide groups.

36 MATERIALS SCIENCE↗

Mimicking Mars: A vacuum simulation chamber for testing environmental instrumentation for Mars exploration

We have built a Mars environmental simulation chamber, designed to test new electromechanical devices and instruments that could be used in space missions. We have developed this environmental system aiming at validating the meteorological station Rover Environment Monitoring Station of NASA's Mars Science Laboratory mission currently installed on Curiosity rover. The vacuum chamber has been built following a modular configuration and operates at pressures ranging from 1000 to 10{sup −6} mbars, and it is possible to control the gas composition (the atmosphere) within this pressure range. The device (or sample) under study can be irradiated by an ultraviolet source and its temperature can be controlled in the range from 108 to 423 K. As an important improvement with respect to other simulation chambers, the atmospheric gas into the experimental chamber is cooled at the walls by the use of liquid-nitrogen heat exchangers. This chamber incorporates a dust generation mechanism designed to study Martian-dust deposition while modifying the conditions of temperature, and UV irradiated.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Procedural analysis of a new method for determining the Gibbs energy and experimental data on thermodynamic properties of liquid-metal coolants based on alkali metal alloys

A detailed procedural analysis is given and results of implementation of the new version of the effusion method for determining the Gibbs energy (thermodynamic activity) of binary and ternary systems of alkali metals Cs-Na, K-Na, Cs-K, and Cs-K-Na are presented. The activity is determined using partial pressures of the components measured according the effusion method by the intensity of their atomic beams. The pressure range used in the experiment is intermediate between the Knudsen and hydrodynamic effusion modes. A generalized version of the effusion method involves the pressure range beyond the limits of the applicability of the Hertz-Knudsen equation. Employment of this method provides the differential equation of chemical thermodynamics; solution of this equation makes it possible to construct the Gibbs energy in the range of temperatures 400 {<=} T {<=} 1200 K and concentrations 0 {<=} x{sub i} {<=} 1.

36 MATERIALS SCIENCE↗