Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA DENSITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

Application of maximum likelihood methods to laser Thomson scattering measurements of low density plasmas

Laser Thomson scattering (LTS) is an established plasma diagnostic technique that has seen recent application to low density plasmas. It is difficult to perform LTS measurements when the scattered signal is weak as a result of low electron number density, poor optical access to the plasma, or both. Photon counting methods are often implemented in order to perform measurements in these low signal conditions. However, photon counting measurements performed with photo-multiplier tubes are time consuming and multi-photon arrivals are incorrectly recorded. In order to overcome these shortcomings a new data analysis method based on maximum likelihood estimation was developed. The key feature of this new data processing method is the inclusion of non-arrival events in determining the scattered Thomson signal. Maximum likelihood estimation and its application to Thomson scattering at low signal levels is presented and application of the new processing method to LTS measurements performed in the plume of a 2-kW Hall-effect thruster is discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2013

On the phase shift between electric potential and plasma density fluctuations in the edge turbulence

In some cases, the phase shift between fluctuations of the electric potential and plasma density helps to identify the instability that governs the turbulent state. In this paper, the basic experimental and theoretical results that denote the possibility (or impossibility) of such identification are briefly discussed. The experimental data based on measurements of the phase shift between the floating potential and ion saturation current fluctuations in the L-2M stellarator-a system with externally imposed magnetic surfaces-are presented (Shchepetov, Kholnov, Fedyanin, et al., Plasma Phys. Controlled Fusion 50, 045001 (2008)). It is shown that the observed phase shift {Omega} varies in a wide range from {pi} to 0, gradually decreasing with deepening inside the plasma. A number of arguments are presented suggesting that {Omega} Almost-Equal-To {pi} can indicate that the process is nonlocal, i.e., oscillations at a given spatial point are driven and mainly determined by the processes localized outside of the observation point. We note that, within the framework of the magnetohydrodynamic theory, plasma was definitely unstable with respect to resistive interchange modes in all cases under study. It is demonstrated experimentally that the widespread notion that the phase shift {Omega} Almost-Equal-To {pi}/2 is characteristic of only resistive interchange modes is hardly universal. The experimental results are analyzed on the basis of analytical estimates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRSDate not supplied

PetitSat - a 6U CubeSat to Examine Plasma Density Enhancements in the Ionosphere

PetitSat is a CubeSat mission designed to examine the link between Medium-Scale Traveling Ionospheric Disturbances (MSTIDs) in the upper atmosphere and plasma density enhancements. The mission will provide in situ measurements of the plasma density, 3D ion drift, as well as ion and neutral composition. The instrument suite includes a combined retarding potential analyzer and cross-track drift meter and an ion-neutral mass spectrometer. This instrument suite will provide comprehensive information about the fluctuations in plasma, as well as changes in the neutral profile. petitSat will launch into a 51 deg inclination orbit at 400 km (consistent with an International Space Station deployment), allowing for numerous conjunctions with the Boston University All-Sky Imager network and GPS receivers from the International Global Navigation Satellite Systems (GNSS) Service (IGS) network over the mission lifetime.

Jeffrey Hamilton Klenzing↗
DOE OSTI2014

The response of plasma density to breaking inertial gravity wave in the lower regions of ionosphere

We present a three-dimensional numerical study for the E and lower F region ionosphere coupled with the neutral atmosphere dynamics. This model is developed based on a previous ionospheric model that examines the transport patterns of plasma density given a prescribed neutral atmospheric flow. Inclusion of neutral dynamics in the model allows us to examine the charge-neutral interactions over the full evolution cycle of an inertial gravity wave when the background flow spins up from rest, saturates and eventually breaks. Using Lagrangian analyses, we show the mixing patterns of the ionospheric responses and the formation of ionospheric layers. The corresponding plasma density in this flow develops complex wave structures and small-scale patches during the gravity wave breaking event.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Plasma density injection and flow during coaxial helicity injection in a tokamak

Whole device, resistive MHD simulations of spheromaks and tokamaks have used a large diffusion coefficient that maintains a nearly constant density throughout the device. In the present work, helicity and plasma are coinjected into a low-density plasma in a tokamak with a small diffusion coefficient. As in previous simulations [Hooper et al., Phys. Plasmas 20, 092510 (2013)], a flux bubble is formed, which expands to fill the tokamak volume. The injected plasma is non-uniform inside the bubble. The flow pattern is analyzed; when the simulation is not axisymmetric, an n = 1 mode on the surface of the bubble generates leakage of plasma into the low-density volume. Closed flux is generated following injection, as in experiments and previous simulations. The result provides a more detailed physics analysis of the injection, including density non-uniformities in the plasma that may affect its use as a startup plasma [Raman et al., Phys. Rev. Lett. 97, 175002 (2006)].

Hooper, E. B. (ORCID:0000000251197451)↗
DOE OSTI2012

Plasma density measurements in tungsten wire-array Z-pinches

Measurements of the plasma density profile near the exploding wires in 1 MA tungsten (W) wire-array Z-pinches have been made using calibrated x-ray absorption. As many as 5 x-ray images per pulse were obtained between 65 and 160 ns after the start of the 100 ns rise time current pulse. Measured W ion densities range from above 10{sup 19}/cm{sup 3} close to the wire to {approx}10{sup 17}/cm{sup 3} about 1 mm away from the wire in the plasma stream. After accurate geometrical registration of the individual wires in each successive image in a pulse using the Genetic Algorithm, the temporal evolution of the axial modulation wavelength distribution of the ablation rate from the wires in each array and the global mass-ablation rate as a function of time are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Two-dimensional plasma density evolution local to the inversion layer during sawtooth crash events using Beam Emission Spectroscopy

Here, we present methods for analyzing Beam Emission Spectroscopy (BES) data to obtain the plasma density evolution associated with rapid sawtooth crash events at the DIII-D tokamak. BES allows coverage over a 2D spatial plane, inherently local measurements, with fast time responses, and, therefore, provides a valuable new channel for data during sawtooth events. A method is developed to remove sawtooth-induced edge-light pulses contained in the BES data. The edge light pulses appear to be from the D α emission produced by edge recycling during sawtooth events, and are large enough that traditional spectroscopic filtering and data analysis techniques are insufficient to deduce physically meaningful quantities. A cross-calibration of 64 BES channels is performed by using a novel method to ensure accurate measurements. For the large-amplitude density oscillations observed, we discuss and use the non-linear relationship between the BES signal δI/ I 0 and the plasma density variation δn e / n e0 . The 2D BES images cover an 8 × 20 cm 2 region around the sawtooth inversion layer and show large-amplitude density oscillations, with additional significant spatial variations across the inversion layer that grows and peaks near the time of the temperature crash. The edge light removal technique and method of converting large-amplitude δI/ I 0 to δn e / n e0 presented here may help analyze other impulsive MHD phenomena in tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2013

Raman Backscatter as a Remote Laser Power Sensor in High-Energy-Density Plasmas [Stimulated Scattering as a Remote Laser Power Sensor in High-Density and Temperature Plasmas]

Stimulated Raman backscatter is used as a remote sensor to quantify the instantaneous laser power after transfer from outer to inner cones that cross in a National Ignition Facility (NIF) gas-filled hohlraum plasma. By matching stimulated Raman backscatter between a shot reducing outer versus a shot reducing inner power we infer that about half of the incident outer-cone power is transferred to inner cones, for the specific time and wavelength configuration studied. Furthermore, this is the first instantaneous nondisruptive measure of power transfer in an indirect drive NIF experiment using optical measurements.

42 ENGINEERING↗
DOE OSTI2025

Optical Imaging of Laser-Driven Fast Electron Weibel-like Filamentation in Overcritical Density Plasma

We report on the measurement of filamented transport of laser-generated fast electron beams in near-critical density plasma. A relativistic intensity long-wave-infrared laser irradiated a hydrodynamically shaped helium gas flow at an electron density n e ≃ 10 25 m − 3 , generating a large flux of fast electrons that propagated beyond the critical surface. The beam-to-background electron density ratio was sufficiently high to drive growth of Weibel-like filamentation, which was measured by optical probing to extend up to 800 μ m with radii ∼ 10 μ m . Particle-in-cell simulations reproduce the main features of the filamentation generation, suggesting that collisionless processes are dominant in these interactions. Expansion of the filaments after formation infers a fast electron heated plasma temperature ∼ 400 eV in the overcritical density plasma. Published by the American Physical Society 2025

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Intrinsic evolution of the decoupling and coupling of the plasma density and temperature in a cylindrical laboratory plasma device

Here, an intrinsic evolution in the decoupling–coupling–decoupling (DCD) of the electron density and temperature responding to the magnetic field change is observed in a cylindrical laboratory plasma device. Experimental results show that the density and the temperature decouple in the low magnetic field, couple with higher magnetic field, and decouple again with a continuous magnetic field increase. An element physical picture of the DCD regime is unraveled based on the analyses of gradient lengths, the turbulence propagation directions, the turbulence spatial scales, and the relationship between the normalized collision rates and the poloidal mode numbers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2012

RELAXATION OF MAGNETIC FIELD RELATIVE TO PLASMA DENSITY REVEALED FROM MICROWAVE ZEBRA PATTERNS ASSOCIATED WITH SOLAR FLARES

It is generally considered that the emission of microwave zebra pattern (ZP) structures requires high density and high temperature, which is similar to the situation of the flaring region where primary energy is released. Therefore, a parameter analysis of ZPs may reveal the physical conditions of the flaring source region. This work investigates the variations of 74 microwave ZP structures observed by the Chinese Solar Broadband Radio Spectrometer (SBRS/Huairou) at 2.6-3.8 GHz in nine solar flares, and we find that the ratio between the plasma density scale height L{sub N} and the magnetic field scale height L{sub B} in emission sources displays a tendency to decrease during the flaring processes. The ratio L{sub N} /L{sub B} is about 3-5 before the maximum of flares. It decreases to about 2 after the maximum. The detailed analysis of three typical X-class flares implies that the variation of L{sub N} /L{sub B} during the flaring process is most likely due to topological changes of the magnetic field in the flaring source region, and the stepwise decrease of L{sub N} /L{sub B} possibly reflects the magnetic field relaxation relative to the plasma density when the flaring energy is released. This result may also constrain solar flare modeling to some extent.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1998

High-Density Plasma Reactors: Simulations for Design

The development of improved and more efficient plasma reactors is a costly process for the semiconductor industry. Until five years ago, the Industry made most of its advancements through a trial and error approach. More recently, the role of computational modeling in the design process has increased. Both conventional computational fluid dynamics (CFD) techniques like Navier-Stokes solvers as well as particle simulation methods are used to model plasma reactor flowfields. However, since high-density plasma reactors generally operate at low gas pressures on the order of 1 to 10 mTorr, a particle simulation may be necessary because of the failure of CFD techniques to model rarefaction effects. The direct simulation Monte Carlo method is the most widely accepted and employed particle simulation tool and has previously been used to investigate plasma reactor flowfields. A plasma DSMC code is currently under development at NASA Ames Research Center with its foundation as the object-oriented parallel Cornell DSMC code, MONACO. The present investigation is a follow up of a neutral flow investigation of the effects of process parameters as well as reactor design on etch rate and etch rate uniformity. The previous work concentrated on silicon etch of a chlorine flow in a configuration typical of electron cyclotron resonance (ECR) or helical resonator type reactors. The effects of the plasma on the dissociation chemistry were modeled by making assumptions about the electron temperature and number density. The electrons or ions themselves were not simulated.The present work extends these results by simulating the charged species.The electromagnetic fields are calculated such that power deposition is modeled self-consistently. Electron impact reactions are modeled along with mechanisms for charge exchange. An bipolar diffusion assumption is made whereby electrons remain tied to the ions. However, the velocities of tile electrons are allowed to be modified during collisions and are not confined to a Maxwellian distribution. The interaction between the neutral flow and plasma is examined, and results for etch rate uniformity from the previous research and the present plasma simulations are compared.

Hash, David B.↗
DOE OSTI2016

High density plasmas and new diagnostics: An overview (invited)

One of the limiting factors for the full understanding of Electron Cyclotron Resonance Ion Sources (ECRISs) fundamental mechanisms consists of few types of diagnostic tools so far available for such compact machines. Microwave-to-plasma coupling optimisation, new methods of density overboost provided by plasma wave generation, and magnetostatic field tailoring for generating a proper electron energy distribution function, suitable for optimal ion beams formation, require diagnostic tools spanning across the entire electromagnetic spectrum from microwave interferometry to X-ray spectroscopy; these methods are going to be implemented including high resolution and spatially resolved X-ray spectroscopy made by quasi-optical methods (pin-hole cameras). The ion confinement optimisation also requires a complete control of cold electrons displacement, which can be performed by optical emission spectroscopy. Several diagnostic tools have been recently developed at INFN-LNS, including “volume-integrated” X-ray spectroscopy in low energy domain (2-30 keV, by using silicon drift detectors) or high energy regime (>30 keV, by using high purity germanium detectors). For the direct detection of the spatially resolved spectral distribution of X-rays produced by the electronic motion, a “pin-hole camera” has been developed also taking profit from previous experiences in the ECRIS field. The paper will give an overview of INFN-LNS strategy in terms of new microwave-to-plasma coupling schemes and advanced diagnostics supporting the design of new ion sources and for optimizing the performances of the existing ones, with the goal of a microwave-absorption oriented design of future machines.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2011

Effects of temperature and near-substrate plasma density on the structural and electrical properties of dc sputtered germanium thin films

Germanium thin films were deposited by dc reactive magnetron sputtering as a function of substrate temperature and ion flux using an unbalanced magnetron with an external magnetic field. The ion flux and energy distribution were measured using a retarding field energy analyzer (RFEA), a flat probe with a guard ring, and cylindrical Langmuir probes. The RFEA ion flux, the flat probe saturation currents, and the ion densities inferred from the cylindrical probe data are in very good agreement over a wide range of plasma densities, which were varied both by the external coil current and discharge power. The RFEA ion energy distributions are in good agreement with the plasma potentials inferred from the cylindrical probes, and suggest that the nonuniformity of the plasma in the vicinity of the substrate holder should be considered in the interpretation of probe results in these systems. The deposited films were characterized by x-ray diffraction, Raman spectroscopy, optical transmission, resistivity, and Hall effect measurements. Under low ion bombardment conditions, an abrupt onset of the crystalline phase with respect to temperature is observed in the Raman and x-ray diffraction measurements, and the crystal quality increases with increasing temperature above the transition temperature. The transition is also accompanied by a sharp decrease in film resistivity. The microcrystalline films have a strong preferential orientation in the (220) direction, and are p type with carrier densities in the range 10{sup 18} cm{sup -3} and mobilities in the range 15-30 cm{sup 2}/V-s. The structural and electronic properties of the films are sensitive to the ion flux. Near the transition temperature the effects of increasing ion flux can be attributed to the small temperature rise that accompanies the higher plasma density. At higher temperatures the increased ion flux results in a more random crystallographic orientation, with significantly lower carrier concentrations and only slightly lower carrier mobilities, implying either a reduction in acceptor defect density and/or the creation of compensating n-type defects.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Stopping-power enhancement from discrete particle-wake correlations in high-energy-density plasmas

Three-dimensional (3D) simulations of electron beams propagating in high-energy-density plasmas using the quasistatic Particle-in-Cell (PIC) code QuickPIC demonstrate a significant increase in stopping power when beam electrons mutually interact via their wakes. Each beam electron excites a plasma wave wake of wavelength ~ 2 π c / ω p e , where c is the speed of light and ω p e is the background plasma frequency. Here we show that a discrete collection of electrons undergoes a beam-plasma-like instability caused by mutual particle-wake interactions that causes electrons to bunch in the beam, even for beam densities n b for which fluid theory breaks down. This bunching enhances the beam's stopping power, which we call “correlated stopping,” and the effect increases with the “correlation number” N b ≡ n b ( c / ω p e ) 3 . For example, a beam of monoenergetic 9.7 MeV electrons with N b = 1 / 8 , in a cold background plasma with n e = 10 26 cm – 3 (450 g cm – 3 DT), has a stopping power of 2.28 ± 0.04 times the single-electron value, which increases to 1220 ± 5 for N b = 64 . The beam also experiences transverse filamentation, which eventually limits the stopping enhancement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2013

Study of electron acceleration and x-ray radiation as a function of plasma density in capillary-guided laser wakefield accelerators

Laser wakefield electron acceleration in the blow-out regime and the associated betatron X-ray radiation were investigated experimentally as a function of the plasma density in a configuration where the laser is guided. Dielectric capillary tubes were employed to assist the laser keeping self-focused over a long distance by collecting the laser energy around its central focal spot. With a 40 fs, 16 TW pulsed laser, electron bunches with tens of pC charge were measured to be accelerated to an energy up to 300 MeV, accompanied by X-ray emission with a peak brightness of the order of 10{sup 21} ph/s/mm{sup 2}/mrad{sup 2}/0.1%BW. Electron trapping and acceleration were studied using the emitted X-ray beam distribution to map the acceleration process; the number of betatron oscillations performed by the electrons was inferred from the correlation between measured X-ray fluence and beam charge. A study of the stability of electron and X-ray generation suggests that the fluctuation of X-ray emission can be reduced by stabilizing the beam charge. The experimental results are in good agreement with 3D particle-in-cell (PIC) simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗