Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nuclear matrix elements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

E2 rotational invariants of 0$^{+}_{1}$ and 2$^{+}_{1}$ states for 106 Cd: The emergence of collective rotation

The collective structure of 106 Cd is elucidated by multi-step Coulomb excitation of a 3.849 MeV/A beam of 106 Cd on a 1.1 mg/cm 2 208 Pb target using GRETINA-CHICO2 at ATLAS. Fourteen E2 matrix elements were obtained. The nucleus 106 Cd is a prime example of emergent collectivity that possesses a simple structure: it is free of complexity caused by shape coexistence and has a small, but collectively active number of valence nucleons. This work follows in a long and currently active quest to answer the fundamental question of the origin of nuclear collectivity and deformation, notably in the cadmium isotopes. The results are discussed in terms of phenomenological models, the shell model, and Kumar-Cline sums of E2 matrix elements. The < 0$^{+}_{2}$ ||E2||2$^{+}_{1}$ > matrix element is determined for the first time, providing a total, converged measure of the electric quadrupole strength, < Q 2 >, of the first-excited 2$^{+}_{1}$ level relative to the 0$^{+}_{1}$ ground state, which does not show an increase as expected of harmonic and anharmonic vibrations. Strong evidence for triaxial shapes in weakly collective nuclei is indicated; collective vibrations are excluded. This is contrary to the only other cadmium result of this kind in 114 Cd by C. Fahlander et al., Nucl. Phys. A485, 327 (1988), which is complicated by low-lying shape coexistence near midshell.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Progress on Light-Element Standard Cross Sections at Los Alamos [Slides]

Presenters identified the following statuses of the light-element standards: Extension of N-N scattering analysis to 200 MeV will likely come in time for ENDF/B VIII.1 and new data are to be added even in the energy range up to 100 MeV; for n- 3 He, a more recent 4 He R-matrix analysis from which updated n+ 3 He cross sections could be obtained for ENDF/B VIII.1; for n- 6 Li, more work is required to get a reasonable fit to all data up to E n = 8 MeV. Of particular concern are the t+ 4 He scattering data at E t > 14 MeV. For n- 10 B, new work on the 11 B system has not yet been started and there is much new data to add for n+ 10 B reactions, and maybe also for &#945 + 7 Li reactions. The proliferation of excited-state channels will limit the upper neutron energy of the analysis to a few MeV. For n- 12 C, new elastic and inelastic scattering data from Vanhoy support the results of the present analysis. More work is needed to extend the fit successfully above 6.5 MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Control of atomic Bose – Einstein condensate with interferometric feedback probing

We consider the problem of decoherence in a Bose – Einstein condensate (BEC) of noninteracting atoms during interferometric probing with a classical monochromatic external field. The condensate is located in one of the arms of the Mach – Zehnder interferometer, while part of the radiation from the interferometer output is fed back to the input, thereby closing the coherent feedback loop. A more general setting of the problem is also considered, in which the condensate is located in a system of interferometers ‘nested’ into each other, while part of the output radiation of each of them is also fed back to its input, closing the so-called multiloop feedback. The possibility of effective control of decoherence rates of various matrix elements is shown. The application of feedback of the proposed type to BEC in a double-well potential is investigated. It is found that this feedback allows efficient control of the distribution of atoms between the wells. (paper)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Induction Heating Model of Cermet Fuel Element Environmental Test (CFEET)

Deep space missions with large payloads require high specific impulse and relatively high thrust to achieve mission goals in reasonable time frames. Nuclear Thermal Rockets (NTR) are capable of producing a high specific impulse by employing heat produced by a fission reactor to heat and therefore accelerate hydrogen through a rocket nozzle providing thrust. Fuel element temperatures are very high (up to 3000 K) and hydrogen is highly reactive with most materials at high temperatures. Data covering the effects of high‐temperature hydrogen exposure on fuel elements are limited. The primary concern is the mechanical failure of fuel elements due to large thermal gradients; therefore, high‐melting‐point ceramics‐metallic matrix composites (cermets) are one of the fuels under consideration as part of the Nuclear Cryogenic Propulsion Stage (NCPS) Advance Exploration System (AES) technology project at the Marshall Space Flight Center. The purpose of testing and analytical modeling is to determine their ability to survive and maintain thermal performance in a prototypical NTR reactor environment of exposure to hydrogen at very high temperatures and obtain data to assess the properties of the non‐nuclear support materials. The fission process and the resulting heating performance are well known and do not require that active fissile material to be integrated in this testing. A small‐scale test bed; Compact Fuel Element Environmental Tester (CFEET), designed to heat fuel element samples via induction heating and expose samples to hydrogen is being developed at MSFC to assist in optimal material and manufacturing process selection without utilizing fissile material. This paper details the analytical approach to help design and optimize the test bed using COMSOL Multiphysics for predicting thermal gradients induced by electromagnetic heating (Induction heating) and Thermal Desktop for radiation calculations.

Gomez, C. F.↗

Induction Heating Model of Cermet Fuel Element Environmental Test (CFEET)

Deep space missions with large payloads require high specific impulse and relatively high thrust to achieve mission goals in reasonable time frames. Nuclear Thermal Rockets (NTR) are capable of producing a high specific impulse by employing heat produced by a fission reactor to heat and therefore accelerate hydrogen through a rocket nozzle providing thrust. Fuel element temperatures are very high (up to 3000 K) and hydrogen is highly reactive with most materials at high temperatures. Data covering the effects of high‐temperature hydrogen exposure on fuel elements are limited. The primary concern is the mechanical failure of fuel elements due to large thermal gradients; therefore, high‐melting‐point ceramics‐metallic matrix composites (cermets) are one of the fuels under consideration as part of the Nuclear Cryogenic Propulsion Stage (NCPS) Advance Exploration System (AES) technology project at the Marshall Space Flight Center. The purpose of testing and analytical modeling is to determine their ability to survive and maintain thermal performance in a prototypical NTR reactor environment of exposure to hydrogen at very high temperatures and obtain data to assess the properties of the non‐nuclear support materials. The fission process and the resulting heating performance are well known and do not require that active fissile material to be integrated in this testing. A small‐scale test bed; Compact Fuel Element Environmental Tester (CFEET), designed to heat fuel element samples via induction heating and expose samples to hydrogen is being developed at MSFC to assist in optimal material and manufacturing process selection without utilizing fissile material. This paper details the analytical approach to help design and optimize the test bed using COMSOL Multiphysics for predicting thermal gradients induced by electromagnetic heating (Induction heating) and Thermal Desktop for radiation calculations.

Gomez, Carlos F.↗

Strong Interaction Dynamics and Fermi $β$ Decay in the Nucleon and the Nucleus

Nuclear super-allowed β decay has been used to obtain tight limits on the value of the CKM matrix element V ud that is important for unitarity tests and, therefore, for tests of the standard model. Current requirements on precision are so intense that effects formerly thought too small to matter are now considered relevant. This article is a brief review of personal efforts to include the effects of strong interactions on Fermi β decay. First, I examine the role of isospin violation in the decay of the neutron. The size of the necessary correction depends upon detailed strong-interaction dynamics. The isospin violating parts of the nucleon wave function, important at the low energy of β decay, can be constrained by data taken at much higher energies, via measurements, for example, of ed → e'π ± + X reactions at Jefferson Laboratory. The next point of focus is on the role of nuclear short-ranged correlations, which affect the value of the correction needed to account for isospin violation in extracting the value of V ud . The net result is that effects previously considered as irrelevant are now considered relevant for both neutron and nuclear β decay.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Matrix Graphite Material Models In Pebbles and Compacts For Bison

The cores and reflectors in high-temperature gas-cooled reactors (HTGRs) are made of graphite materials, with the graphite acting as a moderator, a fuel host matrix, or the foundation for various structural components. This study aims to survey the models in the literature for graphite materials being used as host matrices in pebble/fuel compacts and to implement those surveyed models into Bison to conduct an early assessment of graphite's thermo-mechanical response under various reactor conditions. In this study, thermal (e.g., thermal conductivity, and specific heat capacity) and mechanical (e.g., elastic properties, thermal expansion, irradiation-induced dimensional changes, and irradiation-induced creep) material models for various graphite grades (e.g., H-451, IG-110, G-348, 2020, A3-3, and A3-27) are incorporated into Bison. Two benchmark problems are then exercised utilizing these new graphite-related capabilities: (1) modeling an Advanced Gas Reactor (AGR)-2 fuel compact, and (2) modeling the debonding of a particle-matrix interface.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Draft Experimental Plan for Commercial SNF Degradation in Repository Environments with a Focus on Fracture Matrix Degradation

This report documents work performed supporting US Department of Energy (DOE) Nuclear Energy Spent Fuel and Waste Disposition, Spent Fuel and Waste Science and Technology, under work breakdown structure element 1.08.01.03.04, “Inventory and Waste Form Characteristics and Performance.” In particular, this report fulfills the M3 milestone, M3SF-21OR010309072 "Draft Experimental Plan for Commercial SNF Degradation in Repository Environments” as described in work package SF-21OR01030907 "SNF Degradation Testing-ORNL".This experimental plan is a collaboration between ORNL, SNL, ANL, and PNNL. It is intended to support source term model development and spent fuel degradation testing in a range of generic repository conditions. Potential testing and experiments to support validation of the Fuel Matrix Dissolution Model (FMDM) and the overall development/validation of repository source term modeling are discussed.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Field Theory of the Fermi Function

The Fermi function F ( Z , E ) accounts for QED corrections to beta decays that are enhanced at either small electron velocity β or large nuclear charge Z . For precision applications, the Fermi function must be combined with other radiative corrections and with scale- and scheme-dependent hadronic matrix elements. We formulate the Fermi function as a field theory object and present a new factorization formula for QED radiative corrections to beta decays. We provide new results for the anomalous dimension of the corresponding effective operator complete through three loops, and resum perturbative logarithms and π enhancements with renormalization-group methods. Our results are important for tests of fundamental physics with precision beta decay and related processes. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Ultrafast Molecular Frame Quantum Tomography

Here, we develop and experimentally demonstrate a methodology for a full molecular frame quantum tomography (MFQT) of dynamical polyatomic systems. We exemplify this approach through the complete characterization of an electronically nonadiabatic wave packet in ammonia (NH 3 ). The method exploits both energy and time-domain spectroscopic data, and yields the lab frame density matrix (LFDM) for the system, the elements of which are populations and coherences. The LFDM fully characterizes electronic and nuclear dynamics in the molecular frame, yielding the time- and orientation-angle dependent expectation values of any relevant operator. For example, the time-dependent molecular frame electronic probability density may be constructed, yielding information on electronic dynamics in the molecular frame. In NH 3 , we observe that electronic coherences are induced by nuclear dynamics which nonadiabatically drive electronic motions (charge migration) in the molecular frame. Here, the nuclear dynamics are rotational and it is nonadiabatic Coriolis coupling which drives the coherences. Interestingly, the nuclear-driven electronic coherence is preserved over longer timescales. In general, MFQT can help quantify entanglement between electronic and nuclear degrees of freedom, and provide new routes to the study of ultrafast molecular dynamics, charge migration, quantum information processing, and optimal control schemes.

74 ATOMIC AND MOLECULAR PHYSICS↗

Computing the QRPA level density with the finite amplitude method

Here, we describe a new algorithm to calculate the vibrational nuclear level density of an atomic nucleus. Fictitious perturbation operators that probe the response of the system are generated by drawing their matrix elements from some probability distribution function. We use the Finite Amplitude Method to explicitly compute the response for each such sample. With the help of the Kernel Polynomial Method, we build an estimator of the vibrational level density and provide the upper bound of the relative error in the limit of infinitely many random samples. The new algorithm can give accurate estimates of the vibrational level density. Since it is based on drawing multiple samples of perturbation operators, its computational implementation is naturally parallel and scales like the number of available processing units.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

CSBCOO SPMM: Compressed Sparse Block Coordinate format sparse matrix dense vector multiply benchmark (CSBCOO SPMM) v1.0

The purpose of this microbenchmark is to provide a means to explore different programming methodologies using a simple, but not trivial, mathematical kernel. The kernel is based on the matrix vector product in the MFDn nuclear configuration interaction code's LOBPCG eigensolver. This particular mathematical operation is a key element in the solution of systems of equations and block eigensolvers.

Cook, Brandon↗

A Study of a Surrogate Nuclear Thermal Propulsion Fuel Element

We report a surrogate fuel, Zirconium Carbide/Titanium Nitride has been prepared using a simple method to obtain a more uniform distribution of titanium nitride in the zirconium carbide matrix. Powders were sintered using Spark Plasma Sintering at 1750oC and 1850oC using a modified sintering profile. This resulted in a fairly uniform distribution of titanium nitride in the zirconium carbide matrix with a density of 95% of theoretical at 1850oC. Scanning electron microscopy, indentation hardness and x-ray diffraction results are given.

36 MATERIALS SCIENCE↗

An IIPG-based finite element framework in MOOSE for modeling fiber reinforced composite failure governed by extrinsic cohesive laws

Fiber reinforced composites (FRC) are widely applied to many important engineering structures such as silicon carbide ceramic matrix composite (SiC CMC) of nuclear fuel claddings. Many material and structure failures are initiated at the interface between two distinctive materials, such as the debonding of interfaces of matrix/fiber of composites or bulk matrix/inclusion in metals at micro-scales. Accurate and robust modeling of these interface failures is critical to the development of novel material and structure with improved functionality. This paper presents a discontinuous Galerkin (DG) finite element method based on the Incomplete Interior Penalty scheme and its implementation in MOOSE for modeling material interface behaviors. The proposed method naturally accommodates important extrinsic cohesive zone material models and is capable of modeling the failures of material interfaces across which material properties are highly distinctive. We demonstrate a good performance of the proposed method using single fiber and multiple fiber debonding problems.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Multi-channel direct detection of light dark matter: theoretical framework

We present a unified theoretical framework for computing spin-independent direct detection rates via various channels relevant for sub-GeV dark matter — nuclear re- coils, electron transitions and single phonon excitations. Despite the very different physics involved, in each case the rate factorizes into the particle-level matrix element squared, and an integral over a target material- and channel-specific dynamic structure factor. We show how the dynamic structure factor can be derived in all three cases following the same procedure, and extend previous results in the literature in several aspects. For electron transitions, we incorporate directional dependence and point out anisotropic target materials with strong daily modulation in the scattering rate. For single phonon excitations, we present a new derivation of the rate formula from first principles for generic spin-independent couplings, and include the first calculation of phonon excitation through electron couplings. We also discuss the interplay between single phonon excitations and nuclear recoils, and clarify the role of Umklapp processes, which can dominate the single phonon production rate for dark matter heavier than an MeV. Our results highlight the complementarity between various search channels in probing different kinematic regimes of dark matter scattering, and provide a common reference to connect dark matter theories with ongoing and future direct detection experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗