Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NUCLEAR MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Building a Predictive Fission Rate Model

Nuclear fission, and specifically the rate at which fission occurs compared to other types of reactions, is a crucial piece in the puzzle of the origin of the elements in the universe. Fission in astrophysical environments involves rare and exotic nuclei that cannot be studied in the laboratory, and we must therefore rely on model calculations. Yet all fission rates calculated today use a phenomenological (theoretical) model that was formulated in 1939, updated in 1953, and has remained essentially unchanged. Because the model contains many adjustable parameters, it has been successfully used to fit existing data, but in turn has very limited predictive power in cases where the data are poor or nonexistent. The goal of this project was to develop a novel approach that moves away from phenomenology to construct a fission-rate model built from microscopic ingredients: protons, neutrons, and their mutual interactions. The approach adopted in this work relied on the construction of a discrete basis of mean-field states that form paths through scission. The calculations were performed within the framework of the generator coordinate method. The project has produced a methodology for constructing the discrete basis states and identifying likely fission paths, as well as estimates of the energy partition between fragments and a formalism to calculate fission rates based on Fermi’s golden rule.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1993

Power Conditioning System Modelling for Nuclear Electric Propulsion

NASA LeRC is currently developing a Fortran based model of a complete nuclear electric propulsion (NEP) vehicle that would be used for piloted and cargo missions to the Moon or Mars. The proposed vehicle design will use either a Brayton or K-Rankine power conversion cycle to drive a turbine coupled with a rotary alternator. Two thruster types are also being studied, ion and magnetoplasmadynamic (MPD). In support of this NEP model, Rocketdyne developed a power management and distribution (PMAD) subroutine that provides parametric outputs for selected alternator operating voltages and frequencies, thruster types, system power levels, and electronics coldplate temperatures. The end-to-end PMAD model described is based on the direct use of the alternator voltage and frequency for transmitting power to either ion or MPD thrusters. This low frequency transmission approach was compared with dc and high frequency ac designs, and determined to have the lowest mass, highest efficiency, highest reliability and lowest development costs. While its power quality is not as good as that provided by a high frequency system, it was considered adequate for both ion and MPD engine applications. The low frequency architecture will be used as the reference in future NEP PMAD studies.

Metcalf, Kenneth J.↗
NASA NTRS1993

Heat pipe cooled heat rejection subsystem modelling for nuclear electric propulsion

NASA LeRC is currently developing a FORTRAN based computer model of a complete nuclear electric propulsion (NEP) vehicle that can be used for piloted and cargo missions to the Moon or Mars. Proposed designs feature either a Brayton or a K-Rankine power conversion cycle to drive a turbine coupled with rotary alternators. Both ion and magnetoplasmodynamic (MPD) thrusters will be considered in the model. In support of the NEP model, Rocketdyne is developing power conversion, heat rejection, and power management and distribution (PMAD) subroutines. The subroutines will be incorporated into the NEP vehicle model which will be written by NASA LeRC. The purpose is to document the heat pipe cooled heat rejection subsystem model and its supporting subroutines. The heat pipe cooled heat rejection subsystem model is designed to provide estimate of the mass and performance of the equipment used to reject heat from Brayton and Rankine cycle power conversion systems. The subroutine models the ductwork and heat pipe cooled manifold for a gas cooled Brayton; the heat sink heat exchanger, liquid loop piping, expansion compensator, pump and manifold for a liquid loop cooled Brayton; and a shear flow condenser for a K-Rankine system. In each case, the final heat rejection is made by way of a heat pipe radiator. The radiator is sized to reject the amount of heat necessary.

Moriarty, Michael P.↗
DOE OSTI2017

Chabazite Zeolite Membranes for Krypton/Xenon Separation: Control of Membrane Properties and Process Modeling

Nuclear energy is considered to be a clean and economical means of carbon-free energy. As part of the overall process for recycling used nuclear fuel (UNF), it is necessary to develop technologies to separate the off-gases formed during the fission of uranium and plutonium in nuclear power reactors. The off-gas stream is generated during the shearing and chopping, voloxidation, and acid dissolution steps, and would have a flow rate of ∼2500 L/min assuming a typical 800 tons heavy metal/yr reprocessing facility. Kr separation from Xe is one of the steps in a proposed UNF off-gas processing flowsheet. The Kr/Xe mixture is approximately 10/90 by volume and hence the separation of Kr would reduce the volume of radioactive {sup 85}Kr waste by a factor of 10. Kr/Xe separation is challenging since they are both chemically inert species and physically very similar (0.036 nm size difference). There is no existing process for this separation that is suitable for use in UNF recycling since conventional cryogenic distillation requires highly intensive power and large system volume. Membrane-based separation using radiation-stable materials such as zeolites could be an attractive separation method, if membranes with sufficient Kr flux and selectivity can be fabricated. Zeolite membranes offer an opportunity to exploit the size difference of Kr (kinetic diameter 0.36 nm) and Xe (0.396 nm) to achieve preferential permeation of the minority component (Kr) from the mixture, leading to an efficient separation with very low energy requirements. An ideal membrane process would permeate a stream of pure Kr for storage and also produce pure Xe which has commercial value (> $8000/kg at 99+% purity). SAPO-34 is a silico-alumino-phosphate zeolite molecular sieve with CHA framework topology and containing uniform micropores (0.38 nm), intermediate in size between the kinetic diameters of Kr and Xe. It was hypothesized that SAPO-34 membranes can separate krypton and xenon by diffusivity differences. Previously we fabricated SAPO-34 membranes and showed that they are capable of separating Kr from Xe. Our previous work also indicated that there is much potential for engineering the separation properties of these membranes with a view to improving permeance and selectivity and evaluating the expected process performance. The main objectives of the present study are: 1) development of SAPO-34 membranes with enhanced membrane performance via thickness reduction and ion exchange, and 2) process modeling for technic-economic analysis of zeolite membrane systems for Kr/Xe separation.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Development and Porting of Nuclear Reactor Computational Models for the NRIC Virtual Test Bed in FY23

The U.S. DOE’s National Reactor Innovation Center (NRIC) hosts an open-source website and associated GitHub repository called the Virtual Test Bed (VTB) on which computational models for advanced reactors are documented and shared with the reactor community. In FY23 under the NRIC program, computational models for nuclear reactor analysis were developed and contributed to the VTB Github repository during FY23 by contributors at Argonne National Laboratory. Other models developed outside of NRIC were also ported to the VTB as part of this work, serving a broader mission to make computational reactor analysis models more widely available to the reactor community. The model development activities focused on demonstration of gas-cooled microreactor models including computational fluid dynamics simulations of flow through an industry-inspired air jacket design, and simulation of multiphysics transients for a gas-cooled microreactor assembly. Additionally, development of a molten salt reactor (led at Idaho National Laboratory) was supported through Argonne’s expertise in multigroup cross sections generation. Models for these two reactor types were targeted due to their relevancy to NRIC’s Demonstration of Microreactor Experiments (DOME) and Laboratory for Operation and Testing in the U.S. (LOTUS) physical test beds, which are slated to host microreactor and molten salt reactor experiments. The model porting activities consisted of developing detailed documentation for several physics models which originate from the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. We include only contributions from Argonne National Laboratory in this report.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Improving Reliability of Large Language Models for Nuclear Power Plant Diagnostics Technical Presentation

Large Language Models (LLMs) struggle out of the box when answering factually about detailed questions, especially in domains that are sparsely represented in their training data. This causes hallucinations and reduces reliability making it difficult for them to be used in practice. This work shows that using RAG techniques can improve factual accuracy and reliability, allowing for the application of LLMs in specialized areas, even when those areas that aren’t extensively covered in their initial training.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2018

Residual spin susceptibility in the spin-triplet orbital-singlet model

Nuclear magnetic resonance and Knight shift measurements are critical tools in the identification of spin-triplet superconductors. We discuss the effects of spin-orbit coupling on the Knight shift and susceptibilities for a variety of spin triplet multi-orbital gap functions with orbital-singlet character and compare their responses to “traditional” single-band spin-triplet (p x + ip y ) superconductors. In conclusion, we observe a non-negligible residual spin-susceptibility at low temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

On the Validity of Certain Approximations Used in the Modeling of Nuclear EMP

The legacy codes developed for the modeling of EMP, multiple scattering of Compton electrons has typically been modeled by the obliquity factor. A recent publication has examined this approximation in the context of the generated Compton current [W. A. Farmer and A. Friedman, IEEE Trans. Nucl. Sc. 62, 1695 (2015)]. Here, this previous analysis is extended to include the generation of the electromagnetic fields. Obliquity factor predictions are compared with Monte-Carlo models. In using a Monte-Carlo description of scattering, two distributions of scattering angles are considered: Gaussian and a Gaussian with a single-scattering tail. Additionally, legacy codes also neglect the radial derivative of the backward-traveling wave for computational efficiency. The neglect of this derivative improperly treats the backward-traveling wave. Moreover, these approximations are examined in the context of a high-altitude burst, and it is shown that in comparison to more complete models, the discrepancy between field amplitudes is roughly two to three percent and between rise-times, 10%. Finally, it is concluded that the biggest factor in determining the rise time of the signal is not the dynamics of the Compton current, but is instead the conductivity.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2020

The convergence of quadrupole rotational invariants from the nuclear shell model

Nuclei exhibit both single-particle and collective degrees of freedom, with the latter often subdivided into vibrational and rotational motions. Experimentally identifying the relative roles of these collective modes is extremely challenging, particularly in the face of possible shape coexistence. Model-independent, invariant quantities describing the deformation of a nucleus in the intrinsic frame have long been known but their determination potentially requires a large quantity of experimental data to achieve convergence. Through comparison with the nuclear shell model, the question of convergence is addressed. Shell-model calculations performed in the sd- and pf-shell model spaces are used to determine electric-quadrupole matrix elements for a multitude of low-lying states using the first 40 states of the relevant spins. Relative contributions to the rotationally invariant quantities from multiple states can therefore be determined. It is found that, on average, the inclusion of four intermediate states results in the leading-order invariant, $\langle\hat{Q^2}\rangle$, converging to within 10% of its true value and the triaxiality term, cos (3δ), converging to its true value, though some variance remains. Higher-order quantities relating to the softness of the nuclear shape are found to converge more slowly. The convergence of quadrupole rotationally invariant sum rules was quantified in the sd- and pf-shell model spaces and indicates the challenge inherent in a full determination of nuclear shape. The present study is limited to relatively small valence spaces. Finally, larger spaces, such as the rare-earth region, potentially offer faster convergence.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2014

Developing a Validation Methodology for Expert-Informed Bayesian Network Models Supporting Nuclear Nonproliferation Analysis

Under the auspices of Pacific Northwest National Laboratory’s Signature Discovery Initiative (SDI), the research team developed a series of Bayesian Network models to assess multi-source signatures of nuclear programs. A Bayesian network is a mathematical model that can be used to marshal evidence to assess competing hypotheses. The purpose of the models was to allow non-expert analysts to benefit from the use of expert-informed mathematical models to assess nuclear programs, because such assessments require significant technical expertise ranging from the nuclear fuel cycle, construction and engineering, imagery analysis, and so forth. One such model developed under this research was aimed at assessing the consistency of open-source information about a nuclear facility with the facility’s declared use. The model incorporates factors such as location, security and safety features among others identified by subject matter experts as crucial to their assessments. The model includes key features, observables and their relationships. The model also provides documentation, which serves as training materials for the non-experts.

White, Amanda M.↗
DOE OSTI2021

Yet Another Hauser-Feshbach Code

Code framework to perform simulations of nuclear reactions with incident particles including gammas, protons, neutrons, deuterons, tritons, helium-3, and alphas to develop nuclear data libraries and study nuclear reaction phenomona. The code can model nuclear reactions or initial populations specified by the user. The decays principally follow the compound-nucleus hypothesis and the statistical decay of Hauser and Feshbach. The code models nuclear decays with a Monte Carlo process that tracks the decay of each state. Data libraries are produced that can be translated into GNDS (generalized Nuclear Data Structure). YAHFC can also be used as an event generator, with individual decays written to disk for offline analysis. Both serial and MPI versions are provided. YAHFC does NOT perform transport of nuclear reactions through materials, only the primary reaction with a target material.

Ormand, WilliamE.↗
DOE OSTI2018

Molten Salt-Fueled Nuclear Reactor Model for Licensing and Safeguards Investigations

Fluid-fueled nuclear reactors, such as molten salt reactors (MSRs) have recently gained significant interest. As with any reactor, modeling and simulation is a key factor for advanced reactor design and licensing and will be required for the deployment of MSRs. However, there exists significant gaps in simulation capabilities and system behavior. This paper presents the Modelica model of an MSR based off the Molten Salt Demonstration Reactor, including important physics specific to MSRs such as fission product transport.

Greenwood, Scott↗
DOE OSTI2013

Half-life calculation of one-proton emitters with a shell model potential

The accumulated amount of data for half-lives of proton emitters still remains a challenge to the ability of nuclear models to reproduce them consistently. These nuclei are far from beta stability line in a region where the validity of current nuclear models is not guaranteed. A nuclear shell model is introduced to the calculation of the nuclear barrier of less deformed proton emitters. The predictions using the proposed model are in good agreement with the data, with the advantage of have used only a single parameter in the model.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1993

Brayton Power Conversion System Parametric Design Modelling for Nuclear Electric Propulsion

The parametrically based closed Brayton cycle (CBC) computer design model was developed for inclusion into the NASA LeRC overall Nuclear Electric Propulsion (NEP) end-to-end systems model. The code is intended to provide greater depth to the NEP system modeling which is required to more accurately predict the impact of specific technology on system performance. The CBC model is parametrically based to allow for conducting detailed optimization studies and to provide for easy integration into an overall optimizer driver routine. The power conversion model includes the modeling of the turbines, alternators, compressors, ducting, and heat exchangers (hot-side heat exchanger and recuperator). The code predicts performance to significant detail. The system characteristics determined include estimates of mass, efficiency, and the characteristic dimensions of the major power conversion system components. These characteristics are parametrically modeled as a function of input parameters such as the aerodynamic configuration (axial or radial), turbine inlet temperature, cycle temperature ratio, power level, lifetime, materials, and redundancy.

Ashe, Thomas L.↗
DOE OSTI2012

Mass predictions of atomic nuclei in the infinite nuclear matter model

We present here the mass excesses, binding energies, one- and two-neutron, one- and two-proton and {alpha}-particle separation energies of 6727 nuclei in the ranges 4{<=}Z{<=}120 and 8{<=}A{<=}303 calculated in the infinite nuclear matter model. Compared to our predictions of 1999 mass table, the present ones are obtained using larger data base of 2003 mass table of Wapstra and Audi and resorting to higher accuracy in the solutions of the {eta}-differential equations of the INM model. The local energy {eta}'s supposed to carry signature of the characteristic properties of nuclei are found to possess the predictive capability. In fact {eta}-systematics reveal new magic numbers in the drip-line regions giving rise to new islands of stability supported by relativistic mean field theoretic calculations. This is a manifestation of a new phenomenon where shell-effect overcomes the instability due to repulsive components of the nucleon-nucleon force broadening the stability peninsula. The two-neutron separation energy-systematics derived from the present mass predictions reveal a general new feature for the existence of islands of inversion in the exotic neutron-rich regions of nuclear landscape, apart from supporting the presently known islands around {sup 31}Na and {sup 62}Ti. The five global parameters representing the properties of infinite nuclear matter, the surface, the Coulomb and the pairing terms are retained as per our 1999 mass table. The root-mean-square deviation of the present mass-fit to 2198 known masses is 342 keV, while the mean deviation is 1.3 keV, reminiscent of no left-over systematic effects. This is a substantive improvement over our 1999 mass table having rms deviation of 401 keV and mean deviation of 9 keV for 1884 data nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Model for nuclear spin product-state distributions of ultracold chemical reactions in magnetic fields

Based on a theoretical model where the nuclear spins remain unchanged during a collision, we provide an analytical and general expression for the nuclear spin state-to-state distribution of an ultracold diatom-diatom chemical reaction in a magnetic field, for given rotational transitions of the molecules. It simply requires knowledge of the field-dependent eigenfunctions of the molecular reactants and products of the chemical reaction. The final state-to-state distribution drastically changes with the magnetic field. When the distribution is summed over all the final products, a simplified expression is found where only the knowledge of the eigenfunctions of the molecular reactants is required. The present theoretical formalism has been successfully used to explain the magnetic field behavior of the product-state distribution in chemical reactions of ultracold KRb molecules [Hu et al., Nat. Chem. 13, 435 (2021)].

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗