Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NONLINEAR PROBLEMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Estimating viscoelastic compliance of desiccating cementitious materials using drying prism tests

Highlights: • Determining relative humidity and degree of reaction of desiccating cementitious materials via an integrated method • Extracting moisture diffusion coefficient of cement mortar using the mass loss data of the prism specimens • Estimating uniaxial viscoelastic compliance of cement mortar using the shrinkage strain data of the prism specimens An integrated modeling approach to determining internal relative humidity and degree of reaction of desiccating cementitious materials has been developed. By simultaneously accounting for both self-desiccation and external drying, the model is capable of predicting the evolution of material properties of desiccating cementitious materials. Using the mass loss data of the prism specimens, the moisture diffusion coefficient of a nonlinear model for cement mortar was determined. Additionally, a previous poroviscoelastic shrinkage model was modified and extended. Through comparison of predicted and measured axial strain of the prism specimens, the viscoelastic compliance of cement mortar was extracted. The present work revealed that it is possible to use a simple drying prism test to fit the moisture diffusion coefficient and creep compliance of cementitious materials, though the comparison of the extracted viscoelastic compliance with measured compliance was only reasonable if the outer layer of the drying mortar was presumed to have microcracking.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Experimental investigation of the short-term creep recovery of hardened cement paste at micrometre length scale

This paper presents an experimental investigation on the short-term creep recovery of cement paste at micrometre length scale. Micro-cantilever beams were fabricated and tested with 8 different loading series using the nanoindenter. It is found that cement pastes show high recovery ratios (>80%) even subjected to very high stress levels. Relatively lower recovery ratios and non-linear creep were also observed for w/c 0.4 samples under high stress levels. A good agreement is found between the results predicted using the linear superposition principle and the experimental results except for the measured non-linear creep in w/c 0.4 samples. It is suggested that the short-term creep recovery may be associated with the microscale stress redistribution or the reversible internal water movement. The observed non-linear creep under the highest stress level may be due to the higher density of microcracks generated during the loading stage, which may further promote the water transfer.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Estimation of constituent properties of concrete materials with an artificial neural network based method

Multi-scale models are developed for heterogeneous concrete materials to estimate their macroscopic mechanical properties in terms of micro-structural data. One crucial challenge of those models is the identification of local properties of constituent phases. In this paper, we present an efficient method based on Artificial Neural Networks (ANN). Typical concrete materials are taken as example. A macroscopic analytical strength criterion is established from three steps of nonlinear homogenization procedure. The macroscopic strength of materials is determined as a function of the frictional coefficient and cohesion of solid cement particles at nanometer scale, intra-particle pores, inter-particle pores and aggregates (inclusions). The objective is to identify the nanoscopic frictional coefficient and cohesion of cement particle from measured macroscopic values of uniaxial compression and tensile strengths. For this purpose, a numerical method based on the ANN is developed. With the analytical macroscopic strength criterion, sensitivity studies are first realized to identify the most important micro-structural parameters influencing the macroscopic strength of concrete. A simplified analytical macroscopic strength criterion is then proposed. A large dataset is further constructed through the inversion of the analytical strength criterion by using the aggregates volume fraction, porosity, macroscopic uniaxial tensile and compressive strengths as input variables and the frictional coefficient and cohesion of cement particles as output unknowns. An ANN model containing four hidden layers and 100 neurons in each layer is constructed and trained by using this dataset. Various types of validation of the ANN model are performed. It is found that the proposed ANN based model can effectively predict the frictional coefficient and cohesion of porous cement paste at the microscopic scale with a very good accuracy.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Higher-order LaSDI: Reduced order modeling with multiple time derivatives

Solving complex partial differential equations (PDEs) is essential across scientific disciplines but often requires numerical models that can be prohibitively expensive in time-sensitive applications. Reduced-order models (ROMs) address this challenge by exploiting low-dimensional structure to create fast approximations. The Latent Space Dynamics Identification (LaSDI) framework has demonstrated success in learning ROMs for parameterized PDE families, but remains limited to first-order systems. Here, in this paper, we propose Higher-Order LaSDI (HLaSDI), which extends the LaSDI framework to PDEs with arbitrary order of time derivatives. This generalization significantly expands the applicability of LaSDI-based methods to systems previously outside their scope, including hyperbolic PDEs. We demonstrate HLaSDI’s accuracy and efficiency on several linear and nonlinear benchmark problems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

An explicit scheme to enforce charge conservation in transient Particle-in-Cell simulations with Maxwell-Boltzmann electrons

The Maxwell-Boltzmann electron model is a very popular approximation of the electronic behavior in electrostatic plasmas, adopted in all cases where the electron dynamics is governed only by a balance between electric and pressure forces. In such a model, the electron dynamics is reduced to solving for a nonlinear Poisson problem together with an additional expression enforcing charge conservation. In this work we derive an expression of charge conservation which can be conveniently applied to explicit schemes to update the reference Boltzmann density, particularly useful when simulating plasma sheaths. The scheme can be equally applied to both steady-state and transient problems. Two examples are shown, a steady-state plasma sheath, and a radio-frequency magnetic presheath. Our proposed scheme allows to enforce global charge conservation locally in time, and can thus be applied to the simulation of transient phenomena.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Parametric dynamic mode decomposition for reduced order modeling

Dynamic Mode Decomposition (DMD) is a model-order reduction approach, whereby spatial modes of fixed temporal frequencies are extracted from numerical or experimental data sets. The DMD low-rank or reduced operator is typically obtained by singular value decomposition of the temporal data sets. For parameter-dependent models, as found in many multi-query applications such as uncertainty quantification or design optimization, the only parametric DMD technique developed was a stacked approach, with data sets at multiple parameter values were aggregated together, increasing the computational work needed to devise low-rank dynamical reduced-order models. Here in this paper, we present two novel approach to carry out parametric DMD: one based on the interpolation of the reduced-order DMD eigen-pair and the other based on the interpolation of the reduced DMD (Koopman) operator. Numerical results are presented for diffusion-dominated nonlinear dynamical problems, including a multiphysics radiative transfer example. All three parametric DMD approaches are compared.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Tunable phononic bandgap materials designed via topology optimization

Topology optimization is used to design phononic bandgap materials that are tunable by mechanical deformation. A periodic media is considered, which due to the assumption of length scale separation, allows the dispersion relations to be obtained by analyzing a single unit cell subjected to Floquet–Bloch boundary conditions. A finite macroscopic deformation is applied to the unit cell to affect its geometry and hence dispersion. We tune the dispersion–deformation relation to our liking by solving a topology optimization problem using nonlinear programming. The adjoint method is employed to compute the sensitivities, and the non-differentiability of degenerate eigenvalues is avoided using symmetric polynomials. Several tunable phononic crystal designs are presented. Also, a verification analysis is performed, wherein the optimized design is interpreted and analyzed using a conforming finite element mesh.

42 ENGINEERING↗
DOE OSTI2021

Computing the shape gradient of stellarator coil complexity with respect to the plasma boundary

Coil complexity is a critical consideration in stellarator design. The traditional two-step optimization approach, in which the plasma boundary is optimized for physics properties and the coils are subsequently optimized to be consistent with this boundary, can result in plasma shapes which cannot be produced with sufficiently simple coils. To address this challenge, we propose a method to incorporate considerations of coil complexity in the optimization of the plasma boundary. Coil complexity metrics are computed from the current potential solution obtained with the REGCOIL code (Landreman, Nucl. Fusion , vol. 57, 2017, 046003). While such metrics have previously been included in derivative-free fixed-boundary optimization (Drevlak et al. , Nucl. Fusion , vol. 59, 2018, 016010), we compute the local sensitivity of these metrics with respect to perturbations of the plasma boundary using the shape gradient (Landreman & Paul, Nucl. Fusion , vol. 58, 2018, 076023). We extend REGCOIL to compute derivatives of these metrics with respect to parameters describing the plasma boundary. In keeping with previous research on winding surface optimization (Paul et al. , Nucl. Fusion , vol. 58, 2018, 076015), the shape derivatives are computed with a discrete adjoint method. In contrast with the previous work, derivatives are computed with respect to the plasma surface parameters rather than the winding surface parameters. To further reduce the resolution required to compute the shape gradient, we present a more efficient representation of the plasma surface which uses a single Fourier series to describe the radial distance from a coordinate axis and a spectrally condensed poloidal angle. This representation is advantageous over the standard cylindrical representation used in the VMEC code (Hirshman & Whitson, Phys. Fluids , vol. 26, 1983, pp. 3553–3568), as it provides a uniquely defined poloidal angle, eliminating a null space in the optimization of the plasma surface. In comparison with previous spectral condensation methods (Hirshman & Breslau, Phys. Plasmas , vol. 5, 1998, p. 2664), the modified poloidal angle is obtained algebraically rather than through the solution of a nonlinear optimization problem. The resulting shape gradient highlights features of the plasma boundary that are consistent with simple coils and can be used to couple coil and fixed-boundary optimization.

Physics↗
DOE OSTI2024

Development of Steady-State and Dynamic Mass and Energy Constrained Neural Networks for Distributed Chemical Systems Using Noisy Transient Data

The paper presents the development of algorithms for mass and energy constrained neural network models that can exactly conserve the overall mass and energy of distributed chemical process systems, even though the noisy transient data used for optimal model training violate the same. In contrast to approximately satisfying mass and energy balance constraints of a system by soft penalization of objective function, algorithms have been developed for solving equality-constrained nonlinear optimization problems, thus providing the guarantee of exactly satisfying the system mass and energy conservation laws. For developing dynamic mass-energy constrained network models for distributed systems, hybrid series and parallel dynamic-static neural networks have been leveraged. The developed algorithms for solving both the training and forward problems are validated using both steady-state and dynamic data in the presence of various noise characteristics. The developed data-driven algorithms are flexible to exactly satisfy mass and energy balance constraints for dynamic chemical processes if the system holdup information is available. The proposed network structures and algorithms are applied to the development of data-driven lumped and distributed models of an adiabatic superheater/reheater system, a nonisothermal continuous stirred tank reactor, as well as an electrically heated plug-flow reactor system where one form of energy gets transformed to another. It has been observed that the mass-energy constrained neural networks yield a root mean squared error of <1% with respect to the system truth for the case studies evaluated in this work.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Preserving Tracer Correlations in Moment-Based Atmospheric Transport Models

A linear non-diffusive algorithm for advective transport is developed that greatly improves the detail at which aerosols and clouds can be represented in atmospheric models. Linear advection schemes preserve tracer correlations but the most basic linear scheme is rarely used by atmospheric modelers on account of its excessive numerical diffusion. Higher-order schemes are in widespread use, but these present new problems as nonlinear adjustments are required to avoid occurrences of negative concentrations, spurious oscillations, and other non-physical effects. Generally successful at reducing numerical diffusion during the advection of individual tracers, for example, particle number or mass, the higher-order schemes fail to preserve even the simplest of correlations between interrelated tracers. As a result, important attributes of aerosol and cloud populations including radial moments of particle size distributions, molecular precursors related through chemical equilibria, aerosol mixing state, and distribution of cloud phase are poorly represented. We introduce a new transport scheme, minVAR, that is both non-diffusive and preservative of tracer correlations, thereby combining the best features of the basic and higher-order schemes while enabling new features such as the tracking of sub-grid information at arbitrarily fine scales with high computational efficiency.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Two-colour dissipative solitons and breathers in microresonator second-harmonic generation

Frequency conversion of dissipative solitons associated with the generation of broadband optical frequency combs having a tooth spacing of hundreds of giga-hertz is a topical challenge holding the key to practical applications in precision spectroscopy and data processing. The work in this direction is underpinned by fundamental problems in nonlinear and quantum optics. Here, we present the dissipative two-colour bright-bright and dark-dark solitons in a quasi-phase-matched microresonator pumped for the second-harmonic generation in the near-infrared spectral range. We also found the breather states associated with the pulse front motion and collisions. The soliton regime is found to be typical in slightly phase-mismatched resonators, while the phase-matched ones reveal broader but incoherent spectra and higher-order harmonic generation. Soliton and breather effects reported here exist for the negative tilt of the resonance line, which is possible only via the dominant contribution of second-order nonlinearity.

42 ENGINEERING↗
DOE OSTI2020

Nonlinear noise suppression in a high-rate optical channel with phase modulation and dispersion compensation

We have performed a numerical simulation of transmission of optical DP QPSK signals at a rate of 40 Gbaud over a distance of 2000 km. It is shown that a channel with large negative dispersion and preliminary large positive pulse chirping significantly reduces nonlinear distortion and improves the signal quality. To further reduce the probability of recognition error, it is proposed, instead of a negative dispersion fibre, to use compensators with low attenuation. (fibre-optic communication lines)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Possibility of reducing nonlinear distortions of a frequency response of a gas ring laser with a periodic alternating frequency bias

We report a theoretical study of the dependence of the beat frequency of counterpropagating waves on the rotation velocity in a gas ring laser with a periodic alternating frequency bias. Rectangular biases of two types are considered: with constant amplitude and with periodic amplitude modulation. We have found dynamic zones for locking-in the counterpropagating wave frequencies and determined deviations of the frequency response from the ideal one that arise when measuring frequency nonreciprocities, close in magnitude to the amplitude of an alternating frequency bias. It is shown that in the case of a rectangular bias with periodic amplitude modulation, nonlinear distortions of the frequency response can be reduced by an order of magnitude. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Second-harmonic generation in zinc blende crystals under combined action of femtosecond optical and strong terahertz fields

The influence of a short intense (with an electric field strength up to 250 kV cm{sup −1}) terahertz (THz) pulse on the generation of second harmonic (SH) of Ti : sapphire laser radiation in crystals of zinc blende type (InAs and GaAs), characterised by nonzero bulk quadratic susceptibility, is investigated. It is experimentally shown for InAs(100) that, in the case of s-polarised first and second harmonics, an application of s-polarised THz field changes significantly the SH signal. The THz field-induced azimuthal dependence of the SH signal is in good agreement with the results of theoretical calculation within a phenomenological approach. The dependence of the SH signal on the delay time between the optical and THz pulses is investigated. This dependence for the GaAs crystal repeats the envelope of the THz pulse intensity, whereas in the case of InAs crystal there is a significant discrepancy, caused by the nonlinear dynamics of strong THz field in InAs. (nonlinear optical phenomena)

36 MATERIALS SCIENCE↗
DOE OSTI2020

Multifrequency stimulated Raman scattering of light in a calcite single crystal

Using pulses of multifrequency stimulated Raman scattering (SRS) in calcite, nonlinear photoluminescence in a stilbene molecular crystal is excited. When multifrequency SRS is excited by the radiation of a Nd{sup 3+} : YAG laser with a wavelength of 1064 nm, eleven anti-Stokes components are observed in the visible spectrum with an average frequency shift of 1086 cm{sup −1} between them. Using the second harmonic of the Nd {sup 3+} : YAG laser radiation allowed three anti-Stokes and four Stokes components to be recorded. The large spectral range of the frequency comb facilitated effective reduction in the duration and increase in the intensity of the radiation pulse of multifrequency SRS. (nonlinear optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

BaGa{sub 2}GeS{sub 6} and BaGa{sub 2}GeSe{sub 6} crystals for nonlinear optical frequency conversion

We analyse the functional capabilities of new crystals, BaGa{sub 2}GeS{sub 6} (BGGS) and BaGa{sub 2}GeSe{sub 6} (BGGSe), which are used for nonlinear optical frequency conversion in their transparency range. The wavelengths at which maximum conversion efficiencies can be obtained and the tuning range for difference-frequency generation are found. It is shown that there are wavelength combinations at which the effective nonlinearity coefficient varies only slightly in a wide frequency band. (nonlinear optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

457-nm radiation source based on a diode laser for precision spectroscopy of magnesium atoms

We report on the development of a highly stable source of 457-nm radiation based on a diode laser and a tapered amplifier operating in a double-pass scheme. The diode laser frequency was stabilised by a high-Q reference Fabry – Perot interferometer and doubled in a PPSLT nonlinear crystal placed in an enhancement cavity. At a maximum output power of 200 mW at a wavelength of 457 nm, the laser linewidth was less than 5 kHz. The radiation source operation was demonstrated in experiments on precision spectroscopy of cold magnesium atoms in a magneto-optical trap. (lasers)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗