Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NOISE ELIMINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Intelligibility improvement of analog communication systems using an amplitude control technique.

An amplitude control technique has been employed for use with analog voice communication systems, which improves low-level phoneme reception and eliminates the received noise between words and syllables. Tests were conducted on a narrow-band frequency-modulation simplex voice communication channel employing the amplitude control technique. Presented for both the modified rhyme word tests and the phonetically balanced word tests are a series of graphical plots of the tests' score distribution, mean, and standard deviation as a function of received carrier-to-noise power density ratio. At low received carrier-to-noise power density ratios, a significant improvement in the intelligibility was obtained. A voice intelligibility improvement of more than 2 dB was obtained for the modified rhyme test words, and a voice intelligibility improvement in excess of 4 dB was obtained for the phonetically balanced word tests.

Wishna, S.↗
NASA NTRS1977

Low-frequency sine wave hard-limiting technique

Circuit includes serial-in/parallel-out shift register and weighting network that are used to eliminate effects of noise and other nonrepetitive circuit transients. Register and weighting network average decisions from section of signal where decisions are more dependable or where differences between two consecutive samples are larger.

Anderson, T. O.↗
NASA NTRS1977

Attitude determination techniques for Nimbus 6 and Nimbus G

Techniques for measuring attitude deviations in the Nimbus 6 and Nimbus G 3-axis stabilized, zero-momentum, earth observation satellites are presented. The on-orbit telemetered data include scanner roll and pitch error signals, an illuminated DSAS which can read the azimuth and elevation of the sunline when the spacecraft is not in the umbra, the signal from the single gyro in the RMP, and the momenta of the reaction wheels. Mathematical methods for interpreting the measured data are described with attention to filter equations, especially the Kalman filter because of its ability to eliminate high frequency noise.

Das, A.↗
NASA NTRS1981

High-power dual-directional coupler

Water-cooled coupler installed in S-band polarization diversity (SPD) cone is used to calibrate receiving-station relay. Coupler operates without arcing at 400 kw and permits accurate calibration of entire system below antenna feed horn. Device has good directivity, contributes less than 0.01 K to system noise temperature, and eliminates saturation of ground station and spacecraft receivers during high-power operation.

Otoshi, T. Y.↗
NASA NTRS1983

Conceptual design of a data reduction system

A telemetry data processing system was defined of the Data Reduction. Data reduction activities in support of the developmental flights of the Space Shuttle were used as references against which requirements are assessed in general terms. A conceptual system design believed to offer significant throughput for the anticipated types of data reduction activities is presented. The design identifies the use of a large, intermediate data store as a key element in a complex of high speed, single purpose processors, each of which performs predesignated, repetitive operations on either raw or partially processed data. The recommended approach to implement the design concept is to adopt an established interface standard and rely heavily on mature or promising technologies which are considered main stream of the integrated circuit industry. The design system concept, is believed to be implementable without reliance on exotic devices and/or operational procedures. Numerical methods were employed to examine the feasibility of digital discrimination of FDM composite signals, and of eliminating line frequency noises in data measurements.

Source record↗
NASA NTRS1984

Search for emission lines in the gaseous halo of edge-on galaxies

Careful reductions of the short wave prime camera (SWP) spectrum was carried out. A line by line inspection of the spectrum was used to eliminate spurious spikes and a median filter applied to eliminate high frequency noise. Upper limits were obtained for far ultraviolet emission from a hot galactic halo.

Bixler, J.↗
NASA NTRS1987

Spaceborne Imaging Radar-C instrument

The present discussion of the Spaceborne Imaging Radar-C (SIR-C) hardware design, subsystem functional design, and interfaces with the NASA Space Shuttle, gives attention to antenna characteristics and to instrument performance parameter characteristics in the C- and L-bands. The SIR-C antenna is a dual-frequency, dual-polarization distributed array antenna whose distribution of transmit/receive modules improves the system noise figure and eliminates the need for a single, high-power RF source. Phase shifters for individual subarrays allow electronic beam steering in elevation and azimuth.

Huneycutt, Bryan L.↗
NASA NTRS1990

Rain-Blowing Plenum For Antenna Feed Horn

Double-diaphragm radome drives raindrops away from antenna feed horn. Includes solid diaphragm at mouth of feed horn surmounted by perforated diaphragm. Pressurized air in plenum between diaphragms flows out through perforations. Eliminates increase in noise temperature occuring when water covers radome. Useful for X-band and higher frequencies, susceptible to effects of water.

Hames, Peter S.↗
NASA NTRS1989

Progress in kinetic inductance thermometers for X-ray calorimeters

Conventional X-ray microcalorimeters have so far used ionimplanted resistors for thermometers. Recently, however, several new methods for sensing small temperature changes have been suggested that are nondissipative. Such devices may have intrinsically better energy resolution by eliminating the Johnson noise present in resistive devices. The use of kinetic inductance thermometers for X-ray microcalorimeters is being investigated. This technique exploits the strong temperature dependence of magnetic penetration depth of thin superconducting films. The prototype system, designed for operation at 1.5 K, uses films of aluminum and tin. Once the expected temperature sensitivity and alpha particle detection have been demonstrated, aluminum will be replaced with titanium or another material with a suitable critical temperature and the device will be operated at 0.3 K. At this temperature, the energy resolution from thermal noise should be sufficiently good to allow X-ray detection.

Rawley, G. L.↗
NASA NTRS1992

Detailed analysis of low energy plasma data under the Voyager Uranus data analysis program

Research effort included the PLS data analysis program where modifications to the data fitting procedure and elimination of possible noise and electron contamination were made. The analysis code corrections were used in checking the Neptune data gathered during the Voyager 2 encounter and for analyzing selected plasma spectra from the warm Io torus. A major task accomplished was the summary of Uranus-related research in the U.S. National Report to the International Union of Geodesy and Geophysics for the 1987 - 1990 quadrennium. A limited amount of work was accomplished on assessing the Pedersen conductivity of the ionosphere and comparing it with inferred values from shielding by the Uranian ring current. Under this grant there has been a great deal of effort expended on identifying and classifying plasma waves and oscillations in the magnetosheath and solar wind downstream from Uranus. Large amplitude oscillations in plasma parameters are found in the magnetosheath, with density changes of up to a factor of ten occurring on times scales of minutes. New algorithms developed for analyzing the inbound bow shock crossing of Neptune will probably be applied to a more detailed analysis of the Uranus shock in the near future.

Mcnutt, Ralph L., Jr.↗
NASA NTRS1993

A European mobile satellite system concept exploiting CDMA and OBP

This paper describes a novel Land Mobile Satellite System (LMSS) concept applicable to networks allowing access to a large number of gateway stations ('Hubs'), utilizing low-cost Very Small Aperture Terminals (VSAT's). Efficient operation of the Forward-Link (FL) repeater can be achieved by adopting a synchronous Code Division Multiple Access (CDMA) technique, whereby inter-code interference (self-noise) is virtually eliminated by synchronizing orthogonal codes. However, with a transparent FL repeater, the requirements imposed by the highly decentralized ground segment can lead to significant efficiency losses. The adoption of a FL On-Board Processing (OBP) repeater is proposed as a means of largely recovering this efficiency impairment. The paper describes the network architecture, the system design and performance, the OBP functions and impact on implementation. The proposed concept, applicable to a future generation of the European LMSS, was developed in the context of a European Space Agency (ESA) study contract.

Vernucci, A.↗
NASA NTRS1995

Local area analysis of high-degree solar oscillations: New ring fitting procedures

The local area analysis of five-minute solar oscillations using ring diagrams to determine subphotospheric velocity flows is a tool for convection zone dynamics. In relation to the problem of the large computational task of fitting the rings, a faster method is presented that carries out the ring fitting using data obtained with a high l helioseismometer. Noise sources are eliminated, and a perturbation approach is used to fit the azimuthally averaged spectrum. The parameters determined in this way are held constant while the ring diagram is fitted. The results obtained are presented and discussed.

Haber, Deborah A.↗
NASA NTRS2007

Noise-Canceling Helmet Audio System

A prototype helmet audio system has been developed to improve voice communication for the wearer in a noisy environment. The system was originally intended to be used in a space suit, wherein noise generated by airflow of the spacesuit life-support system can make it difficult for remote listeners to understand the astronaut s speech and can interfere with the astronaut s attempt to issue vocal commands to a voice-controlled robot. The system could be adapted to terrestrial use in helmets of protective suits that are typically worn in noisy settings: examples include biohazard, fire, rescue, and diving suits. The system (see figure) includes an array of microphones and small loudspeakers mounted at fixed positions in a helmet, amplifiers and signal-routing circuitry, and a commercial digital signal processor (DSP). Notwithstanding the fixed positions of the microphones and loudspeakers, the system can accommodate itself to any normal motion of the wearer s head within the helmet. The system operates in conjunction with a radio transceiver. An audio signal arriving via the transceiver intended to be heard by the wearer is adjusted in volume and otherwise conditioned and sent to the loudspeakers. The wearer s speech is collected by the microphones, the outputs of which are logically combined (phased) so as to form a microphone- array directional sensitivity pattern that discriminates in favor of sounds coming from vicinity of the wearer s mouth and against sounds coming from elsewhere. In the DSP, digitized samples of the microphone outputs are processed to filter out airflow noise and to eliminate feedback from the loudspeakers to the microphones. The resulting conditioned version of the wearer s speech signal is sent to the transceiver.

Seibert, Marc A.↗
NASA NTRS2010

Final Plenary Session Transcript

Let s start with the report - as you know - when we are talking about flow control it is a multi-disciplinary type of work. So it involves many people and disciplines. This group first discussed the important issues associated with flow control. As you start doing flow control what are the issues to which you really have to start paying attention? That is the first part I am going to present. Then in the second part I will present some challenges - problems that we should really be looking at. So as far as the issues - if you want to control a flow, you really need to understand the flow physics, because anything that you do comes from the flow physics. The design of the controllers, your decisions on the actuators, sensors, reduced order modeling and all of that, would be helped if you understand flow physics. And you have to have a specific objective - what exactly are you controlling? Are you trying to reduce drag, eliminate separation, reduce noise, enhance mixing? So you have to have very specific control objectives. From all the talks we have seen here actuation is extremely important and it is very problem specific. It depends on what problem you are dealing with so you have to design and build actuators for that specific problem. Sensors obviously are very important, especially when you are dealing with feedback control. Consensus was that when you dealing with flow control, you must take an integrated approach; from the beginning you have to take into account every aspect of it and even maybe to modify your experiment, your geometry, to go along with the actuation, sensors and control models. Development of tools is very important in this multi-disciplinary problem. The tools include CFD, reduced order modeling, controller design, understanding and utilizing the instabilities of the flow, etc. So, in order to have success in flow control, we really need to develop these tools.

Gostelow, Paul↗
NASA NTRS2003

Contactless Rotary Electrical Couplings

Rotary electrical couplings based on induction (transformer action) rather than conduction between rotating and stationary circuitry have been invented. These couplings provide an alternative to slip rings and contact brushes. Mechanical imperfections of slip-ring and brush contact surfaces and/or dust particles trapped between these surfaces tend to cause momentary interruptions in electrical contact and thereby give rise to electrical noise. This source of noise can be eliminated in the inductive rotary couplings because no direct contact is necessary for transformer action.

Kumagai, Hiroyuki↗
NASA NTRS2015

Conflict Detection Performance Analysis for Function Allocation Using Time-Shifted Recorded Traffic Data

The performance of the conflict detection function in a separation assurance system is dependent on the content and quality of the data available to perform that function. Specifically, data quality and data content available to the conflict detection function have a direct impact on the accuracy of the prediction of an aircraft's future state or trajectory, which, in turn, impacts the ability to successfully anticipate potential losses of separation (detect future conflicts). Consequently, other separation assurance functions that rely on the conflict detection function - namely, conflict resolution - are prone to negative performance impacts. The many possible allocations and implementations of the conflict detection function between centralized and distributed systems drive the need to understand the key relationships that impact conflict detection performance, with respect to differences in data available. This paper presents the preliminary results of an analysis technique developed to investigate the impacts of data quality and data content on conflict detection performance. Flight track data recorded from a day of the National Airspace System is time-shifted to create conflicts not present in the un-shifted data. A methodology is used to smooth and filter the recorded data to eliminate sensor fusion noise, data drop-outs and other anomalies in the data. The metrics used to characterize conflict detection performance are presented and a set of preliminary results is discussed.

Guerreiro, Nelson M.↗
NASA NTRS1978

Initial results of a porous plug nozzle for supersonic jet noise suppression

As part of a continuing study of possible methods of jet noise reduction, some tests have been made on a porous plug type noise suppressor. Very little information exists on the aeroacoustic performance of jet nozzles having porous elements designed to eliminate the shock wave in the exhaust stream and by so doing to eliminate the shock associated noise and screech. Some initial results on the aeroacoustic performance of a model porous plug type jet noise suppressor are presented. Included are shadowgraph pictures of the flow exhausting from the porous plug nozzle with the comparable acoustic far-field spectra and cross correlations which illustrate the benefits of the test device.

Maestrello, L.↗
NASA NTRS1998

Benefits of Swept and Leaned Stators for Fan Noise Reduction

An advanced high bypass ratio fan model was tested in the NASA Lewis Research Center 9 x 15-Foot Low Speed Wind Tunnel. The primary focus of this test was to quantify the acoustic benefits and aerodynamic performance of sweep and lean in stator vane design. Three stator sets were used for this test series. A conventional radial stator was tested at two rotor-stator axial spacings. Additional stator sets incorporating sweep + lean, and sweep only were also tested. The hub axial location for the swept + lean, and sweep only stators corresponded to the location of the radial stator at the upstream rotor-stator spacing, while the tip axial location of these modified stators corresponded to the radial stator axial position at the downstream position. The acoustic results show significant reductions in both rotor-stator interaction noise and broadband noise beyond what could be achieved through increased axial spacing of the conventional, radial stator. Theoretical application of these results to acoustically quantify a fictitious 2-engine aircraft and flight path suggested that about 3 Effective Perceived Noise (EPN) dB could be achieved through incorporation of these modified stators. This reduction would represent a significant portion of the 6 EPNdB noise goal of the current NASA Advanced Subsonic Technology (AST) initiative relative to that of 1992 technology levels. A secondary result of this fan test was to demonstrate the ability of an acoustic barrier wall to block aft-radiated fan noise in the wind tunnel, thus revealing the acoustic structure of the residual inlet-radiated noise. This technology should prove valuable toward better understanding inlet liner design, or wherever it is desirable to eliminate aft-radiated noise from the fan acoustic signature.

Woodward, Richard P.↗