Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NIOBATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Quasi-Elastic Light Scattering in Congruent Lithium Niobate Crystals

Raman scattering spectra in the frequency range of 5–75 cm{sup –1} in lithium niobate samples with various structural imperfections were obtained. It is shown that the intensity of quasi-elastic light scattering on the wing of the Rayleigh line demonstrates an exponential dependence on the concentration of large-scale defects in the samples. Calibration curves for the intensity of quasi-elastic scattering dependence at low frequencies on the acoustic quality factor are constructed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling of cluster formation in nonlinear optical lithium niobate crystal

The processes occurring during the formation of energetically equilibrium oxygen-octahedral clusters in the ferroelectric phase of lithium niobate (LiNbO{sub 3}) crystal, have been qualitatively modeled in dependence of the phase composition. The modeling results are compared with the data obtained within vacancy models. It is shown that the cluster structure constructed along the crystallographic Y axis is most ordered, while that constructed along the polar Z axis is least ordered. The largest spread in the ratio R = Li/Nb is observed in the direction of the Z axis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Change in the structural imperfection of lithium niobate crystals doped with zinc

The changes in the degree of structural imperfection of lithium niobate (LiNbO{sub 3}) single crystals with an increase in the Li content and doping with zinc (to 1 wt %) have been investigated by the nonlinear optics methods and Raman spectroscopy. The conversion of broadband IR radiation in LiNbO{sub 3} crystals under noncritical (90°) phase-matching condition with vector interactions implemented is investigated. It is shown that the conversion efficiency, spectral width, and the position of maximum in the converted radiation spectrum depend on the ratio R = Li/Nb in LiNbO{sub 3} crystal and the impurity concentration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interdomain region in single-crystal lithium niobate bimorph actuators produced by light annealing

The interdomain region of a bidomain strucrture formed in 127°-cut lithium niobate single crystals using light annealing has been studied by optical and scanning probe microscopies. A periodic subdomain structure on the 180° macrodomain wall is visualized by piezoresponse force microscopy. The piezoresponse signal (polarization) is shown to be a power-law function of the domain width with an exponent n = 0.53.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bidomain structures formed in lithium niobate and lithium tantalate single crystals by light annealing

The bidomain structures produced by light external heating in z-cut lithium niobate and lithium tantalate single crystals are formed and studied. Interdomain regions about 200 and 40 μm wide in, respectively, LiNbO{sub 3} and LiTaO{sub 3} bidomain crystals are visualized and studied by optical microscopy and piezoresponse force microscopy. Extended chains and lines of domains in the form of thin layers with a width less than 10 μm in volume, which penetrate the interdomain region and spread over distances of up to 1 mm, are found.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of the cluster formation in lithium niobate crystals by computer modeling method

The processes occurring upon the formation of energetically equilibrium oxygen-octahedral clusters in the ferroelectric phase of a stoichiometric lithium niobate (LiNbO{sub 3}) crystal have been investigated by the computer modeling method within the semiclassical atomistic model. An energetically favorable cluster size (at which a structure similar to that of a congruent crystal is organized) is shown to exist. A stoichiometric cluster cannot exist because of the electroneutrality loss. The most energetically favorable cluster is that with a Li/Nb ratio of about 0.945, a value close to the lithium-to-niobium ratio for a congruent crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evolution of domain structure and formation of charged domain walls during polarization reversal in lithium niobate single crystals modified by vacuum annealing

The evolution of the domain structure during polarization reversal has been investigated in plates of lithium niobate with spatially inhomogeneous electrical conductivity produced by vacuum annealing. The formation of charged domain walls in the crystal bulk has been studied. Revealed features of the domain growth in the bulk have been attributed to the formation of nanodomains under the pyroelectric field and inhomogeneous spatial distribution of the electric field. Creation of the charged domain walls with controlled parameters is of great interest for domain walls engineering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photoluminescence of Copper-Doped Lithium Niobate Crystals

The photoluminescence (PL) of copper-doped lithium niobate single crystals is studied using different UV–Vis light-emitting diodes and a pulse-periodic laser with a wavelength of 266 nm as excitation radiation sources. With the resonance excitation from a 527-nm light-emitting diode, the intensity of PL increases sharply (by two orders of magnitude). When using a 467-nm light-emitting diode for excitation, the PL spectrum is characterized by the presence of multiphonon lines in the range of 520–620 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Potential Images of Ferroelectric Domain Structures Formed by Electron Beam in Lithium Niobate Crystals

Ferroelectric domain structures formed by an electron beam in lithium niobate crystals are studied using low-voltage SEM microscopy. The structures are formed in crystals with different conductivity, including samples with high-resistance congruent composition (CLN) and samples with conductivity increased by reductive annealing (RLN). The potential nature of the contrast of the domain structures observed in the secondary electron mode depending on the conductivity of the samples and the direction of spontaneous polarization of the domains is analyzed. It is assumed that the domain contrast in CLN crystals is associated with long-lived charges localized near domain walls and in the irradiated areas. The recorded domain structures in the CLN crystals are visualized on polar and nonpolar cuts. In the RLN crystals with improved conductivity compared to CLN, the potential contrast of the periodic domain structures is found only on the polar cuts, where vector P{sub s} of the domains is perpendicular to the irradiated surface. This contrast is likely because the field of the spontaneous electric polarization charges influences the secondary electrons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phosphor for the Near-IR and Short-Wave IR Ranges Based on a Garnet Structured Cubic Modification of Lithium–Lanthanum Niobate

Cubic garnets activated by neodymium and holmium, Li{sub 6}CaLa{sub 2}Nb{sub 2}O{sub 12}:Nd{sup 3+},Ho{sup 3+}, were obtained by solid-state method. The main regularities of changes in the luminescence properties of Li{sub 6}C-aLa{sub 2}Nb{sub 2}O{sub 12}:Nd{sup 3+},Ho{sup 3+} solid solutions in the visible, near-IR, and short-wave IR ranges under 808 nm laser diode radiation are determined. The energy transfer mechanism between active centers, involving the participation of Nd{sup 3+} ions as sensitizers for the luminescence of Ho{sup 3+} ions, is proposed. Low phonon energy, high luminescence intensity in the range of 2.0–3.0 μm, and weak up-conversion luminescence in the region of 450–780 nm make it possible to consider the cubic lithium–lanthanum niobates Li{sub 6}CaLa{sub 2}Nb{sub 2}O{sub 12}:Nd{sup 3+},Ho{sup 3+} as promising phosphors of the short-wave IR range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Features of the Electrical Properties of Lithium Niobate Crystals Grown from a Melt Containing K{sub 2}O Flux

The variations of electrical conductivity and the primary pyroelectric coefficient with temperature for lithium niobate (LiNbO{sub 3}) crystals grown from melt containing K{sub 2}O flux are studied in the range of 292–450 K. These crystals are found to exhibit considerable anisotropy of electrical conductivity, and the proton conductivity is dominant in the studied temperature range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural Features, Physicochemical, and Optical Characteristics of Lithium Niobate Crystals Grown from Boron-Doped Melts

Chemical interactions in the Li{sub 2}O−B{sub 2}O{sub 3}−Nb{sub 2}O{sub 5} system, as well as certain features of crystallization of LiNbO{sub 3} crystals growing from melts containing nonmetal impurities, are considered. It is shown that boron changes the structure of the melt and has a significant impact on the structure and physical characteristics of LiNbO{sub 3} : В crystals, practically not entering the lithium niobate structure. Notable changes and certain features were found in the Raman spectra of grown LiNbO{sub 3} : В crystals, which indicates changing the sequence of the main cations and vacancies along a crystal polar axis and distortion of the oxygen octahedrons. Meanwhile, the distortion of the oxygen octahedrons is anisotropic. LiNbO{sub 3} : В crystals have a higher structural homogeneity than congruent crystals, and are close in the number of NbLi defects to a crystal with a stoichiometric composition, differing from it by a substantially less photorefraction effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Acoustic vibrations in integrated electro-optic modulators on substrates of lithium niobate

The processes of the excitation of acoustic vibrations and their influence on the optical signals in integrated electro-optic modulators on substrates of lithium niobate have been investigated. The resonant frequencies of the excitation of substrate vibrational modes have been determined. It has been shown that acoustic vibrations can make a significant contribution to the modulator transfer characteristic at frequencies up to several hundred megahertz, which should be taken into account when using the modulators at low frequencies, for example, as a part of fiber-optic sensors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Influence of the Configuration and Material of Interdigital Transducers on the Excitation of Surface and Pseudosurface Acoustic Waves in Lithium Niobate Substrates

We have studied the excitation, propagation, and interaction of surface and pseudosurface acoustic waves in X-cut lithium niobate substrate. Resonance excitation frequencies, propagation velocities, and dispersion characteristics for the acoustic waves of each type are determined. It is established that the electrode material influences the efficiency of excitation and interaction between the acoustic waves of various types. Requirements for the material and configuration of electrodes in integrated acousto-optic devices are determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Lightning arrestor connector lead magnesium niobate qualification pellet test procedures.

Enhanced knowledge preservation for DOE DP technical component activities has recently received much attention. As part of this recent knowledge preservation effort, improved documentation of the sample preparation and electrical testing procedures for lead magnesium niobate--lead titanate (PMN/PT) qualification pellets was completed. The qualification pellets are fabricated from the same parent powders used to produce PMN/PT lightning arrestor connector (LAC) granules at HWF&T. In our report, the procedures for fired pellet surface preparation, electrode deposition, electrical testing and data recording are described. The dielectric measurements described in our report are an information only test. Technical reasons for selecting the electrode material, electrode size and geometry are presented. The electrical testing is based on measuring the dielectric constant and dissipation factor of the pellet during cooling from 280 C to 220 C. The most important data are the temperature for which the peak dielectric constant occurs (Curie Point temperature) and the peak dielectric constant magnitude. We determined that the peak dielectric constant for our procedure would be that measured at 1 kHz at the Curie Point. Both the peak dielectric constant and the Curie point parameters provide semi-quantitative information concerning the chemical and microstructural homogeneity of the parent material used for the production of PMN/PT granules for LACs. Finally, we have proposed flag limits for the dielectric data for the pellets. Specifically, if the temperature of the peak dielectric constant falls outside the range of 250 C {+-} 30 C we propose that a flag limit be imposed that will initiate communication between production agency and design agency personnel. If the peak dielectric constant measured falls outside the range 25,000 {+-} 10,000 we also propose that a flag limit be imposed.

36 MATERIALS SCIENCE↗

Remarkable Strontium B-Site Occupancy in Ferroelectric Pb(Zr(1-X)Ti(X))O(3) Solid Solutions Doped With Cryolite-Type Strontium Niobate

New high-performance ferroelectric solid solutions based on Pb(Zr{sub 1-x}Ti{sub x})O{sub 3} (PZT), which are doped with cryolite-type strontium niobate (SNO, Sr{sub 4}(Sr{sub 2-2y/3}Nb{sub 2+2y/3})O{sub 11+y}V{sub O;1-y} with 0{<=}y{<=}1) and hence denoted PZT:SNO, and their microscopic structure and defect chemistry are described. Extended X-ray absorption fine-structure (EXAFS) analyses of PZT:SNO samples revealed that -10% of Sr{sup 2+} occupy the nominal B-sites of the perovskite-type PZT host lattice. This result is supported by EXAFS analyses of both a canonical SrTiO{sub 3} perovskite and two SNO model and reference compounds. Fit models that do not account for Sr{sup 2+} on B-sites are ruled out. A clear Sr-Pb peak in Fourier-transformed EXAFS data visually confirms this structural model. The generation of temporary oxygen vacancies and the intricate defect chemistry induced by SNO-doping of PZT are crucial for the exceptional material properties of PZT:SNO. As a result, ferroelectric PZT:SNO solid solutions are very attractive for use in new and innovative piezoelectric actuator and transducer applications.

36 MATERIALS SCIENCE↗

Bandgap Engineering of Barium Bismuth Niobate Double Perovskite for Photoelectrochemical Water Oxidation

Density-functional theory (DFT) calculation reveals that the bandgap of barium bismuth niobate (Ba 2 BiNbO 6 ) double-perovskite oxide can be effectively narrowed if the oxide is made Bi-rich and Nb-poor. Material synthesis and characterization confirm the predictions from DFT calculation. The results of this study suggest a new strategy for bandgap engineering of metal oxides toward active photoanodes for efficient water-splitting applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Barium Bismuth Niobate Double Perovskite/Tungsten Oxide Nanosheet Photoanode for High‐Performance Photoelectrochemical Water Splitting

Abstract Recently, a new method to effectively engineer the bandgap of barium bismuth niobate (BBNO) double perovskite was reported. However, the planar electrodes based on BBNO thin films show low photocurrent densities for water oxidation owing to their poor electrical conductivity. Here, it is reported that the photoelectrochemical (PEC) activity of BBNO‐based electrodes can be dramatically enhanced by coating thin BBNO layers on tungsten oxide (WO 3 ) nanosheets to solve the poor conductivity issue while maintaining strong light absorption. The PEC activity of BBNO/WO 3 nanosheet photoanodes can be further enhanced by applying Co 0.8 Mn 0.2 O x nanoparticles as a co‐catalyst. A photocurrent density of 6.02 mA cm −2 at 1.23 V (vs reversible hydrogen electrode (RHE)) is obtained using three optically stacked, but electrically parallel, BBNO/WO 3 nanosheet photoanodes. The BBNO/WO 3 nanosheet photoanodes also exhibit excellent stability in a high‐pH alkaline solution; the photoanodes demonstrate negligible photocurrent density decay while under continuous PEC operation for more than 7 h. This work suggests a viable approach to improve the PEC performance of BBNO absorber‐based devices.

Weng, Baicheng↗