SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
We introduce a cutting-edge force field for molybdenum disulfide and use it to uncover mechanisms of peptide recognition and design.
Transition metal carbides are increasingly used as catalysts for the transformation of CO 2 into useful chemicals. Recently, the effect of nanostructuring of such carbides has started to gain relevance in tailoring their catalytic capabilities. Catalytic materials based on molybdenum carbide nanoparticles (MoC y ) have shown a remarkable ability to bind CO 2 at room temperature and to hydrogenate it into oxygenates or light alkanes. However, the involved chemistry is largely unknown. In the present work, a systematic computational study is presented aiming to elucidate the chemistry behind the bonding of CO 2 with a representative set of MoC y nanoparticles of increasing size, including stoichiometric and non-stoichiometric cases. Furthermore, the obtained results provide clear trends to tune the catalytic activity of these systems and to move towards more efficient CO 2 transformation processes.
The preparation of an actinide substituted cubane cluster, (Cp* 3 Mo 3 S 4 )Cp*UI 2 , and its reduced derivatives are reported. Structural and spectroscopic investigations provide insight into the unique interactions between the actinide and its redox-active molybdenum sulphide metalloligand, serving as a model to study atomically-dispersed, low-valent actinide ions on MoS 2 surfaces. To probe the ability of the assembly to facilitate multielectron small molecule activation, the reactivity of the fully-reduced cluster, (Cp* 3 Mo 3 S 4 )Cp*U, with azobenzene was investigated. Addition of the substrate results in the formation of a cis-bis-imido cluster, (Cp* 3 Mo 3 S 4 )Cp*U(=NPh) 2 . Here, cooperative reactivity between the actinide and redox-active support facilitates the 4e − -reduction of substrate.
Here, we describe the solventless catalytic deconstruction of polyethylene-terephthalate (PET) under an aerobic atmosphere, mediated by an earth-abundant, low-cost activated carbon (AC)-supported single-site molybdenum-dioxo catalyst (AC/MoO 2 ). Catalytic amounts of AC/MoO 2 selectively convert waste PET into its monomer, terephthalic acid (TPA), within 4 h at 265 °C with yields as high as 94% under 1 atm air. Pure crystalline TPA product sublimes from the reaction hot zone, crystallizing on the reactor cold zone, thus avoiding the need for separation and purification steps. This process does not employ any hazardous/toxic reducing agents or solvents, and the catalyst can be recycled multiple times without loss of activity, rendering this process highly atom-efficient. According to computational and experimental mechanistic studies, the AC/MoO 2 catalyst mediates a thermoneutral metal-catalyzed β-scission step, followed by an exothermic step that converts the vinyl benzoate intermediate to TPA and acetaldehyde using trace amounts of moisture in the air. The formation of gaseous acetaldehyde makes the isolation of TPA from the reaction mixture facile and industrially favorable, especially since solvents are unnecessary. The present methodology is also extended to the deconstruction of other frequently used polyester plastics, polybutylene terephthalate (PBT), polyethylene naphthalate (PEN), and polyethylene furanoate (PEF), and operates equally well with post-consumer waste products. Notably, this process is also compatible with plastic mixtures of polyesters with polyolefins, polyamides, and polycarbonates, leading to the selective conversion of each polyester to the corresponding monomer, leaving the residual polymer unchanged and polyester-free.
Investigation of the reactivity of the redox-active molybdenum oxide cluster, Cp$^{*}_{2}$Mo 2 O 4 , toward low-valent uranium (Cp$^{*}_{2}$U(bpy), bpy = 2,2'-bupyridine) is reported. Here, structural and spectroscopic analyses provide insight into the interactions of the actinide and metalloligand in the product, [(Cp$^{*}_{2}$Mo 2 O 4 )Cp$^{*}_{2}$U]. Reactivity studies reveal the metalloligand functions as a redox reservoir for uranium.
Development of supported single-site catalysts using small metal sulfide complexes could significantly help in the development of cost-effective catalytic materials to drive selective hydrogenation and hydrogenolysis. The goal of this study is to contribute to the development of metal sulfide catalysts by calculating the thermodynamics of a catalytic cyclic involving a metal organic framework functionalized by insertion of metal sulfide. Anchored metal sulfide complexes can potentially be designed with ligands with distinctly different electronic and catalytic properties for specific catalytic applications. Here we examine the hydrogenation of ethylene as a model. We use density functional theory to investigate molybdenum–sulfur complexes as active catalysts anchored on the metal–organic framework UiO-66 as a stable support. Our calculations show that the anchored complexes with more than two sulfur ligands are unfavorable for ethylene adsorption, so we study complexes with one or two sulfur ligands. Hydrogenation of the unsaturated carbon double bond requires the transfer of two hydrogen atoms, which can occur via heterolytic activation of hydrogen to form a Mo-hydride and a protonated sulfur – either by hydride transfer followed by proton transfer or via proton transfer followed by hydride transfer, and we find that both mechanisms proceed via two-state reactivity involving two spin states along the reaction path. Of the two catalysts studied in gas the phase, the MoS single-sulfur–ligand complex with lower oxidation states produces thermodynamically more favorable intermediates along the pathway for the first hydrogen transfer for both the hydride-first mechanism and the proton-first mechanism. As a result, the quantum mechanical calculations provide experimentally inaccessible partial atomic charges and geometries of the various intermediates encountered along the steps of the reaction mechanisms.
Molybdenum disulfide (MoS 2 ) is a two-dimensional material widely used as a lubricant in many applications involving mechanical loading under a wide range of operating temperatures. Since many synthesis and processing techniques yield MoS 2 in its polycrystalline form, establishing grain boundary (GB) structure–property relations is key to designing MoS 2 microstructures with tailored properties. Here, we employ classical, reactive atomistic simulations to investigate the structure and mechanical behavior of a wide range of GBs in MoS 2 as a function of temperature. Using a bicrystal MoS 2 geometry, we characterize the atomic structure and calculate the energy of several low-angle GBs. Then, we simulate the tensile deformation behavior of MoS 2 bicrystals at several temperatures. Our results reveal that at temperatures above 100 K, the deformation of MoS 2 bicrystals is characterized by the nucleation of shear bands from GBs that grow, with subsequent loading, into the MoS 2 crystals. At low temperatures, the tensile deformation is characterized by the nucleation and propagation of deformation fronts, resulting in altered bond angles and bond lengths. Quantitative analysis reveals a decrease in the ultimate tensile stress and ultimate failure strain of MoS 2 bicrystals with the increase in temperature. Furthermore, our simulations of the mechanical behavior of metastable GBs reveal that the strength and ductility decrease with the increase in energy of these boundary structures. In broad terms, our work provides future avenues to employ GB engineering as a strategy to tailor the properties of MoS 2 microstructures.
The inherent limitations of intercalation-based electrodes in lithium-ion batteries have prompted the search for alternative materials with higher specific capacities and robust electrochemical stability. Sulfur-based electrodes, despite their high theoretical capacities (1672 mAh g −1 ), typically suffer from poor cycling performance. In this work, zinc molybdenum polysulfide (Zn x Mo 3 S 13 , 0.5 ≤ x), an amorphous semiconductor chalcogel, exhibits high specific capacity and excellent cycling stability. Synchrotron X-ray pair distribution function and extended X-ray absorption fine structure analyses reveal a short-range atomic structure comprising Mo–Mo, M–S (M = Mo, Zn), and S–S bonding motifs. The coordination environment of Mo and S closely resembles that of Mo 3 S 13 clusters, interconnected via S–S bridges and Zn 2+ cations. The Li/Zn x Mo 3 S 13 cell delivers an initial discharge capacity of 844 mAh g −1 at C/3, and retains 386.2 mAh g −1 after 1000 cycles with an average coulombic efficiency of 99.99%. The distribution of relaxation times analysis confirms the formation of a stable solid electrolyte interphase, which underpins the cell's long-term stability. In conclusion, this outstanding performance is attributed to the synergistic effects of the chalcogel's unique amorphous framework, semiconductive character, Zn-mediated polysulfide anchoring, and structural resilience, positioning Zn x Mo 3 S 13 chalcogel among the most durable pure metal sulfide cathodes reported for next-generation LIBs.
To explore the role of crystal anisotropy on the elastic-plastic deformation of BCC single crystals at high shock stresses, molybdenum (Mo) single crystals were shock compressed along [100], [111], and [110] orientations at elastic impact stresses between 20 and 110 GPa. Laser interferometry was used to measure shock wave velocities and particle velocity histories. Along the [100] and [111] orientations, elastic-plastic waves (two wave structure) were observed up to 110 GPa. Along the [110] orientation, the two wave structure was observed only up to 90 GPa. The measured elastic wave amplitudes were analyzed to determine crystal anisotropy effects, impact stress dependence, and the activated slip systems on the Hugoniot elastic limit. The results from our work have provided insight into the role of crystal anisotropy on the elastic-plastic deformation under shock compression at high stresses.
Detection and analysis of volatile organic compounds' (VOCs) biomarkers lead to improvement in healthcare diagnosis and other applications such as chemical threat detection and food quality control. Here, we report on tri-molybdenum phosphide (Mo3P) and multiwalled carbon nanotube (MWCNT) junction-based vapor quantum resistive sensors (vQRSs), which exhibit more than one order of magnitude higher sensitivity and superior selectivity for biomarkers in comparison to pristine MWCNT junctions based vQRSs. Transmission electron microscope/scanning tunneling electron microscope with energy dispersive x-ray spectroscopy, x-ray diffraction, and x-ray photoelectron spectroscopy studies reveal the crystallinity and the presence of Mo and P elements in the network. The presence of Mo3P clearly enhanced the performance of vQRS as evidenced in sensitivity and selectivity studies. The vQRSs are stable over extended periods of time and are reproducible, making them a potential candidate for sensing related applications.
Oxides of molybdenum, MoO x , have a rich structural chemistry arising from the accommodation of oxygen deficiency as MoO 3 is reduced and varied redox behavior arising from the ability of Mo to take on several different oxidation states. We review MoO 3 , MoO 2 , and all the reduced Mo oxides with intermediate compositions for their performance as Li-ion battery electrode materials. These reduced oxides are perhaps the most structurally diverse in the field of energy storage materials, taking on structures ranging from ones with crystallographic shear to bronze-like structures and distorted rutile. The crystal structure can have a significant impact on the performance of battery materials, which makes the reduced Mo oxides a promising domain of study. Electrochemical studies of these oxides from as early as 1971 to as recently as 2022 are compiled, and characteristics of capacity, capacity retention, and rate performance are compared. We find that certain oxides indeed display promising and highly reversible capacities for Li + storage. Typical redox voltages for Mo oxides lie in a regime that hinders maximizing energy density when they are paired with higher-voltage cathodes or lower-voltage anodes. The possibility of decreasing the redox voltage in the future will expand the promise of these materials while offering an alternative to more critical elements such as Nb.
We report an updated isothermal equation of state (EoS) of molybdenum (Mo) obtained by compression in beveled and toroidal diamond-anvil cells (DACs). For an improved compression environment, we developed a copper (Cu) pressure-transmitting medium (PTM) for the toroidal diamond-anvil cell samples, as it is a soft metal compared to Mo with a well calibrated EoS. A Ne PTM was used for the conventional beveled DAC samples. The unit-cell volumes of Mo were measured to 336(1) GPa in the Cu PTM and 231.2(6) GPa in the Ne PTM at room temperature. We additionally calculated elastic stiffness and compliance constants and evaluated the uniaxial stress of Mo and Cu with pressure. A new EoS for Mo is presented from data collected in all sample environments and compared to our theoretical predictions as well as previous compression studies of Mo. The (200) lattice plane of Mo produced the lowest volumes across the pressure range of this study for all compression environments, suggesting that it is less affected by nonhydrostatic stresses in the DAC compared to the other observed diffraction planes. The presented Mo EoS is compatible with extrapolations of EoS fits of Mo in helium (He) within ~1% at 330 GPa. Results from this work demonstrate that compressing a sample in a softer metal in the toroidal DAC can improve the compression environment and result in measured sample volumes comparable to those collected in noble-gas media at multi-megabar conditions.
The magnetoresistance of thin nickel films grown on molybdenum disulfide was measured in perpendicular magnetic fields as high as 90 kOe. Films with thicknesses of 20 nm provided continuous surfaces for measurement. The magnetoresistance was found to be linear with respect to the applied magnetic field with no sign of saturation. There was also no evidence of hysteresis or temperature dependence between 100 to 300 K. STM measurement showed the deposited Ni forms a continuous film of extremely small nanoclusters. However, the field dependence of magnetoresistance was found to be significantly larger than bulk Ni, which is in turn larger than Ni with nanoscale grains. We expect the unusual magnetoresistance behavior to arise from some property of the Ni-MoS 2 interface.
The thermal conductivity of a ceramic-metal composite consisting of 60 vol % uranium nitride incorporated into a molybdenum-tungsten matrix has been measured up to a temperature of 1200°C. Compositing nuclear fuel with refractory materials is considered a viable way to improve the thermal and mechanical properties of fuels, and more recently, has been investigated as a way to improve hydrogen compatibility in a nuclear thermal propulsion rocket reactor. Here, we demonstrate that high-density composites can be produced from direct current sintering and that the resulting thermal conductivity is improved compared to the pure.
The production of very pure molybdenum, free of Re even at ultratrace levels, is extremely important in meeting target purity specifications during the production of 99 Mo for medical applications. Here we propose two methods for separating ultratrace levels of Re from a bulk Mo matrix using either solvent extraction or extraction chromatography, combined with inductively coupled plasma quadrupole mass spectrometry (ICP-MS) detection. Re is extracted (D > 70) from solutions in sulfuric acid as a complex with tri-n-butyl phosphate. Scrubbing and washing steps result in total decontamination factors for Mo up to 1,700 for solvent extraction and 3,500 for extraction chromatography. Re is stripped into a 3 M NH 4 OH matrix and analyzed by ICP-MS. Detection (L D ) and quantification (L Q ) limits were optimized by matrix-matching to allow detection of Re in strip solutions at levels of L D = 0.1 ng Re/g-Mo and L Q = 0.3 ng Re/g-Mo in Mo powder samples. By employing these two extraction methods, excellent recoveries of Re from bulk Mo are achieved, and the L Q is improved by a factor of 5 x 10 4 .
Many liquid metal plasma-facing component concepts for fusion reactors require a capillary porous material to wick the liquid metal to the surface of the component. In this work, samples of 3D-printed molybdenum lattices designed to have pore sizes ranging from 100 to 1000 µm were fabricated by two different suppliers. The dimensions of the lattice structures were characterized using an optical microscope, revealing that the lattice walls were almost systematically thicker than they were designed to be and in turn the pores are all smaller than they were designed to be. In many cases the pores were completely clogged. Several spectroscopic techniques were used to characterize the chemical composition of the materials, collectively indicating the presence of a thick layer of oxygen-rich material extending more than 1 µm below the surface. Compression testing revealed significant asymmetry in the mechanical behavior depending on which direction the force was applied relative to the print direction. Lastly, lithium wetting tests of several lattice samples were performed, and a sample with ~250-µm pores was found to soak up lithium quickly after initial wetting of the surface occurred. The implications of these results for future liquid metal plasma-facing component design are discussed.
Transition metals in body-centered cubic (bcc) structures under compression can display several novel physical properties because of their complex electronic structures and electron-phonon interactions. Here, we used inelastic x-ray scattering experiments in a diamond-anvil cell up to ∼45 GPa and density-functional theory calculations up to 210 GPa to investigate the phonon dispersions, and electronic and elastic properties of single-crystal molybdenum (Mo). Our results show a pressure-induced Kohn anomaly at 𝑞∼0.5 along the [ξ00] direction in the longitudinal acoustic mode at ∼45 GPa; this anomaly is triggered by the pressure-enhanced Fermi-surface nesting effect. Theoretical calculations show that electron redistributions in the 𝑠-to-𝑑 orbitals of bcc-Mo contribute to the shear modulus anomaly at ∼50 GPa. In contrast, the Young's modulus anomaly in bcc-Mo at ∼210 GPa results from a Lifshitz-type electronic topological transition. In conclusion, our results shed light on the complex electronic behaviors that are associated with macroscopic elastic properties in typical bcc 𝑑-block transition metals under compression.
Electron emission from thick polished samples of polycrystalline molybdenum (Mo) and single crystalline $\langle$111$\rangle$ silver (Ag) was measured with hard x-ray photoemission spectroscopy. Six different excitation x-ray energies were used, nominally 8.0, 11.0, 13.0, 15.0, 18.0, and 21.5 keV. Survey spectra were recorded with each excitation to a kinetic energy of at most 15 keV, often capturing the entire emission range. The Mo 1s core peak was measured. Detailed LMM Auger spectra of Mo show marked increases in intensity and altered shape when x-ray energy exceeds the Mo 1s binding energy. The Mo and Ag L-shell photoelectron peaks are measured at four x-ray energies up to 18 keV showing the transition from 2p3/2 to 2s photoionization dominance.